Robert Pelnar
79caf3d9c6
tmc2130 optimalization, accurate homing and microstep linearity correction
...
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
2018-02-15 04:17:58 +01:00
Robert Pelnar
081b3852fc
Menu - encoder position stack
2018-02-09 20:26:42 +01:00
Robert Pelnar
31e6271b2c
Voltage measurement - conditional translation
2018-02-08 21:07:17 +01:00
PavelSindler
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
2018-02-06 17:01:09 +01:00
PavelSindler
abf956b86f
init
2018-02-06 09:19:27 +01:00
Robert Pelnar
8562235440
MK2.5 port - compilable version
2018-02-01 20:08:11 +01:00
PavelSindler
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
...
Extruder stealthChop and constant-off-time mode.
2018-01-31 20:21:02 +01:00
Robert Pelnar
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
PavelSindler
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
XPila
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update
...
Preheat temperatures update
2018-01-24 00:11:59 +01:00
PavelSindler
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
PavelSindler
c38458eb67
init
2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
PavelSindler
188116cb7e
Preheat temperatures update
2018-01-22 16:03:43 +01:00
bubnikv
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
...
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
bubnikv
7edce0b890
Only show the debug menu in the DEBUG_BUILD.
2018-01-18 16:43:40 +01:00
bubnikv
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
Robert Pelnar
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
PavelSindler
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
Robert Pelnar
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
PavelSindler
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
Robert Pelnar
530dfba417
Status message limit (PFW-124)
2018-01-12 21:21:21 +01:00
bubnikv
3e6d853364
Debugging of the stepper timer routine. When enabled through
...
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
2018-01-12 20:51:14 +01:00
Robert Pelnar
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
PavelSindler
f5ed12817d
Merge pull request #388 from PavelSindler/first_layer_saving
...
Live adjust Z saving using timeout
2018-01-11 17:49:40 +01:00
PavelSindler
97bd56d560
Merge pull request #386 from PavelSindler/selftest_swapped_fans
...
manual check for swapped fans
2018-01-11 17:45:23 +01:00
PavelSindler
087532085f
development fw versions has initial message for warning
2018-01-11 15:50:26 +01:00
PavelSindler
cc20da62a8
whitespace
2018-01-10 23:31:06 +01:00
PavelSindler
c185b46eb2
live adjust Z saving using timeout
2018-01-10 23:28:41 +01:00
PavelSindler
c79d960cb5
manual check for swapped fans
2018-01-10 16:40:06 +01:00
PavelSindler
b53197fdd1
Fixed error messages for print fan and extruder fan (were swapped)
2018-01-08 12:07:45 +01:00
Robert Pelnar
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
Robert Pelnar
e3c006dbe9
Serial communication uses port0 or port1, not both, removed some suspected code.
...
build 141
2017-12-29 00:06:47 +01:00
Michal Průša
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
Michal Průša
5e5588c72c
Text grooming
...
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
2017-12-28 15:45:52 +01:00
Robert Pelnar
69d496e157
autoload filament menu (PFW-95, PFW-96)
2017-12-27 21:57:51 +01:00
Robert Pelnar
cbd7f033e8
crashdetection and mode menu (PFW-85, PFW-97)
2017-12-27 21:43:04 +01:00
Robert Pelnar
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
Robert Pelnar
7f05b9fd44
changed menu order (PFW 91)
2017-12-22 20:31:45 +01:00
Robert Pelnar
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
PavelSindler
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
PavelSindler
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
Robert Pelnar
eba2924fdd
Remove load/unload menu when autoload enabled
2017-12-20 22:55:11 +01:00
Robert Pelnar
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
PavelSindler
a9d5af4a07
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
2017-12-20 13:33:45 +01:00
PavelSindler
525d022841
whitespace
2017-12-18 19:17:39 +01:00
PavelSindler
31add2e69f
removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function
2017-12-18 19:15:36 +01:00
XPila
9639b58f4d
Merge pull request #329 from XPila/MK3
...
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:42:59 +01:00
Robert Pelnar
01654e7145
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:33:35 +01:00
PavelSindler
ecbb5cf54b
selftest fix
2017-12-15 17:54:52 +01:00
PavelSindler
3c95bea693
threshold changed
2017-12-15 14:07:12 +01:00
PavelSindler
011ebb3675
selftest is checking if fans are swapped, host keepalive messages added
2017-12-14 19:36:32 +01:00
PavelSindler
8c320d0089
selftest delay -> delay_keep_alive
2017-12-13 14:55:53 +01:00
PavelSindler
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
PavelSindler
82dffb688a
force high power mode during xyz cal. and selftest
2017-12-12 20:21:09 +01:00
PavelSindler
997c8de161
shipping prep. reset sets wizard flag, shipping prep wizard improvements
2017-12-12 19:17:37 +01:00
PavelSindler
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
PavelSindler
a724c2664c
menus updated, set lcd_commands_step = 0;
2017-12-12 14:25:13 +01:00
PavelSindler
9ef5570fa3
menus accessable during first layer calibration updated
2017-12-12 13:41:31 +01:00
PavelSindler
d29a95bd65
if first layer calibration is active set SD_PRINTING to true
2017-12-12 11:41:54 +01:00
Robert Pelnar
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
Robert Pelnar
124a3e6da8
Stealth mode limits + END_FILE_SECTION=10000
2017-12-11 16:17:36 +01:00
PavelSindler
20de899d25
Merge branch 'MK3' into sort_files
2017-12-11 11:50:47 +01:00
PavelSindler
13a17f9fd4
dont sort files when changing sort type in settings menu
2017-12-11 11:45:20 +01:00
PavelSindler
1c61f2f29c
First working version
2017-12-11 11:30:49 +01:00
Robert Pelnar
b76758b7b6
Ram status - heap and stack monitor.
2017-12-10 23:45:46 +01:00
Robert Pelnar
e8b2043d03
Stack monitor in stepper ISR
2017-12-10 20:38:09 +01:00
PavelSindler
26135ea227
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 11:08:50 +01:00
Robert Pelnar
82f5a79527
bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*)
2017-12-08 19:22:02 +01:00
PavelSindler
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
PavelSindler
d0b6b19373
save filename to eeprom first, then check if file is complete
2017-12-07 17:16:23 +01:00
PavelSindler
2cbd1f7894
fix: added saving filename to eeprom which was removed by accident
2017-12-06 18:13:54 +01:00
PavelSindler
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
Robert Pelnar
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
Robert Pelnar
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
PavelSindler
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections
...
Menu corrections, translation to Czech language
2017-11-27 18:00:31 +01:00
PavelSindler
ce3f14e1c0
tune menu updated
2017-11-27 17:55:32 +01:00
PavelSindler
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
PavelSindler
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
PavelSindler
7c6d63ffb5
pla preheat temp. changed, temp calibration on/off moved to settings menu
2017-11-27 16:21:54 +01:00
PavelSindler
044ed951cb
translations to czech language and menu corrections: initial version
2017-11-27 16:06:34 +01:00
Robert Pelnar
25c16cc835
Extrudser info, merge upstream (powerpanic fix)
...
build number = 114
2017-11-27 07:44:12 +01:00
XPila
60930beb52
Merge pull request #108 from PavelSindler/power_panic
...
Power panic works with folders
2017-11-27 07:27:17 +01:00
PavelSindler
d9f44eb16b
unused code commented
2017-11-27 06:36:41 +01:00
PavelSindler
bd59e11660
removed serial print
2017-11-27 06:22:32 +01:00
PavelSindler
42b533b5d8
first working version
2017-11-27 06:20:51 +01:00
XPila
3b892e16d8
Merge branch 'MK3' into MK3
2017-11-27 04:49:23 +01:00
Robert Pelnar
4dae6f871e
Sg load meassurement durring self test - 'Belt status'
2017-11-27 04:46:58 +01:00
PavelSindler
5a77113fb5
init
2017-11-27 01:59:47 +01:00
PavelSindler
24195557ea
removed redundant line
2017-11-27 01:24:58 +01:00
PavelSindler
a7b40d43e3
timeouting to status in the end of first layer cal.
2017-11-27 01:23:11 +01:00
PavelSindler
7de187d813
if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom
2017-11-27 00:17:45 +01:00
PavelSindler
05348a33db
wizard: dont update lcd when loading filament
2017-11-24 22:55:47 +01:00
PavelSindler
4b644a58ae
block of gcodes changed to avoid full buffer during v2 cal.
2017-11-23 18:22:00 +01:00
PavelSindler
79c221d6c0
Merge pull request #97 from PavelSindler/wizard
...
show live adjust Z option in main menu during First layer cal.
2017-11-23 15:59:03 +01:00
PavelSindler
2170c1bbe7
timeout to status prolonged, no timeout allowed when MSG_WIZARD_RERUN
2017-11-23 15:46:10 +01:00
PavelSindler
7d825de214
show live adjust Z option in main menu when running First layer calibration
2017-11-22 11:18:39 +01:00
