D.R.racer
c43688a549
Version changed (3.10.0-RC2 build 4104)
2021-04-16 13:52:36 +02:00
DESKTOP-AFI832L\admin
5a91e1de4d
Calibration: fix checking of scan of calibration points
...
PFW-1223
2021-04-14 06:25:18 +02:00
Voinea Dragos
7356cd0811
EEPROM_JOB_ID
2021-04-09 08:09:51 +02:00
DRracer
f9f6284c50
Merge pull request #3100 from wavexx/powerpanic_state_fixes
...
Fix PowerPanic and Crash Detection during homing and bed leveling
2021-04-07 18:19:50 +02:00
Yuri D'Elia
61faa49cbb
Fix buffer overflow in buf
...
Fix cmd overflow introduced in 186ce0f
2021-04-07 15:57:50 +02:00
Alex Voinea
d31601dcb8
Use correct mfrid for gd25q20c
2021-04-06 10:16:47 +02:00
Alex Voinea
94c1e65d83
Fix MK2.x builds
2021-04-06 10:16:47 +02:00
Alex Voinea
56948157d0
GD25Q40C xflash support
2021-04-06 10:16:47 +02:00
Alex Voinea
07bf4bbe48
Fix gd25120c rd_uid command
2021-04-06 10:16:47 +02:00
Alex Voinea
9454f9d8ec
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
Yuri D'Elia
449d181971
G80: handle power panic
...
This is handled in the same way crash detection is handled: homing/mbl
invalidates saved_target _and_ current position.
Fixes PP recovery during MBL and homing.
2021-04-06 02:20:00 +02:00
Yuri D'Elia
b46a52ffa8
G80: Handle crash detection
...
At a higher level, crash detection will repeat the last gcode command.
Some commands such as G28 or G80 need to be repeated in full and require
special handling.
In such cases, do not store the saved target coordinate (which is fake
in such cases) and invalidate the saved position.
This fixes the last coordinate of the first G1 move after recovery.
We also avoid moving from the origin when the saved position is
invalidated, which is not strictly necessary, but saves some time.
2021-04-06 02:00:47 +02:00
Yuri D'Elia
a5530593fa
G80: preserve lcd status and message when aborting
...
Restore the old status just before returning, so that the subsequent G80
can restore the first (initial) message correctly.
2021-04-06 00:31:56 +02:00
Yuri D'Elia
5923276a86
G80: correctly abort during crash detection
...
Crash detection is handled at a higher level (which automatically
repeats the current command), however we still need to abort the current
command correctly.
Handle XY crashes by checking the planner status after st_synchronize().
2021-04-06 00:31:29 +02:00
Yuri D'Elia
5da39df968
G80: Use consistent XY axis feedrate
2021-04-06 00:10:33 +02:00
Yuri D'Elia
ce2e35d14d
Move G80 into it's own function
...
No actual changes done in the function in this, besides break->return.
In G28, simply call the new function instead of using goto, making the
code more readable.
Also remove the senseless comments in G28 about command queuing (dating
back to when G80 was queued instead of being executed).
2021-04-05 23:35:17 +02:00
Yuri D'Elia
d2be40491b
PP recovery: clamp initial position to software endstops
...
As done when initializing the printer from a cold start, we need to
clamp the starting position to software endstops before setting the
planner position since 0,0 is frequently out-of-bounds.
This avoids an useless move during recovery that can cause a crash:
- Initial X is set to be 0
- G1 performed by homing will clamp X>=0, resulting in a positive shift
- If X is already at max X (extruder being parked due to PP), this will
slam at X+, causing an immediate crash.
2021-04-05 22:11:06 +02:00
Yuri D'Elia
3276320a06
Hide tmc2130_sg_change behind DEBUG_CRASHDET_COUNTERS
...
tmc2130_sg_change is only used for debugging purposes.
Hide definition and usage behind the required define.
2021-04-05 20:07:03 +02:00
Yuri D'Elia
6a61c26955
Removed unused crashdet_stop_and_save_print2
2021-04-05 20:04:50 +02:00
3d-gussner
b74e1d6062
Update RepRap url for M123
2021-04-01 19:48:14 +02:00
3d-gussner
e12c1dde5c
Updated RepRap Wiki and removed the @todos
2021-04-01 19:06:31 +02:00
3d-gussner
3b431bcbc1
Fix output "Y distance from min" by removing ":" so translations can use 20 chars
2021-03-31 08:54:16 +02:00
3d-gussner
d864a5cfdb
Define #MSG_PRINTER_IP c=18
2021-03-31 08:46:17 +02:00
3d-gussner
9922774fa7
Cleanup some comments ////c=
2021-03-31 08:11:19 +02:00
3d-gussner
8e74cbce58
Remove r=1 and some minor fixes
2021-03-31 08:07:42 +02:00
3d-gussner
fb691b44b4
Update #MSG_INFO_SENSORS c=18
2021-03-31 07:51:22 +02:00
3d-gussner
3fb90be46f
Define #MSG_SELECT c=18
2021-03-31 07:50:18 +02:00
3d-gussner
9a0e67c1d7
Define #MSG_RENAME c=18
2021-03-31 07:43:48 +02:00
3d-gussner
15919a0f09
Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
2021-03-31 07:41:21 +02:00
3d-gussner
cdfc40fb62
Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
2021-03-31 07:38:41 +02:00
3d-gussner
c0869efc76
Define #MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4, #MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
2021-03-31 07:36:26 +02:00
3d-gussner
268d4020cf
Define #MSG_FINDA c=5 and update #MSG_PINDA c=5
2021-03-31 07:32:43 +02:00
3d-gussner
c0b8eef6cd
Define #MSG_FALSE_TRIGGERING c=20
2021-03-31 07:29:42 +02:00
3d-gussner
1ca443f1f4
Define #MSG_CHECKS c=18
2021-03-31 07:28:18 +02:00
3d-gussner
5e049283be
Define #MSG_UNKNOWN c=13
2021-03-31 07:24:41 +02:00
3d-gussner
982153fee1
Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19
2021-03-31 07:16:36 +02:00
3d-gussner
7a88ce89e4
Update MSG_TEMPERATURE c=18
2021-03-31 07:11:01 +02:00
3d-gussner
c0df79d39a
Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
2021-03-31 07:10:03 +02:00
3d-gussner
7268f6a824
Define #MSG_SELECT_FILAMENT c=20
2021-03-31 07:08:09 +02:00
3d-gussner
2e43234d3f
Update #MSG_SUPPORT c=18
2021-03-31 07:06:46 +02:00
3d-gussner
ba38262109
Update #MSG_STATISTICS c=18
2021-03-31 07:05:28 +02:00
3d-gussner
960ebac02d
Update #MSG_SPEED c=15
2021-03-31 07:04:47 +02:00
3d-gussner
b52d87e9a5
Define #MSG_Z-LEVELING_ENFORCED c=20 r=4
2021-03-31 07:02:42 +02:00
3d-gussner
acbdc2ac8d
Define #MSG_RUNOUTS c=7
2021-03-31 06:59:16 +02:00
3d-gussner
09f4850a8a
Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13
2021-03-31 06:53:04 +02:00
3d-gussner
4749dd1750
Define #MSG_CHECK_IR_CONNECTION c=20 r=4
2021-03-31 06:46:43 +02:00
3d-gussner
bd8ab39b39
Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
2021-03-31 06:45:33 +02:00
3d-gussner
5280a89fba
Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
2021-03-31 06:43:21 +02:00
3d-gussner
0d48a32e87
Define #MSG_RESUME_NOZZLE_TEMP c=20 r=4
2021-03-31 06:41:17 +02:00
3d-gussner
4f394c8c5a
Update #MSG_TUNE c=18, #MSG_PREHEAT c=18
2021-03-31 06:38:50 +02:00
3d-gussner
fbecae1707
Update MSG_PREHEAT c=18
2021-03-31 06:38:06 +02:00
3d-gussner
ac810bf03a
Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
2021-03-31 06:36:28 +02:00
3d-gussner
00b100bf26
Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10
2021-03-31 06:30:00 +02:00
3d-gussner
baf231b0f1
Update MSG_NO_CARD c=18
2021-03-31 06:23:18 +02:00
3d-gussner
1c09e8411d
Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes
2021-03-30 19:30:26 +02:00
3d-gussner
6a266d497b
Define #MSG_REMOVE_TEST_PRINT c=20 r=4
2021-03-30 19:19:43 +02:00
3d-gussner
5fcc731be1
Define #MSG_INSERT_FIL c=20 r=6
2021-03-30 19:17:48 +02:00
3d-gussner
243fa68745
Define #MSG_LIN_CORRECTION c=18
2021-03-30 19:16:11 +02:00
3d-gussner
44f7be134d
Define #MSG_FS_VERIFIED c=20 r=3
2021-03-30 19:13:31 +02:00
3d-gussner
bcdaecb46d
Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20
2021-03-30 19:10:56 +02:00
3d-gussner
de9697b913
Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20
2021-03-30 19:06:46 +02:00
3d-gussner
d601355d40
Define #MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5, #MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
2021-03-30 19:01:24 +02:00
3d-gussner
669ab0f7f7
Define #MSG_GCODE_DIFF_CONTINUE c=20 r=4, #MSG_GCODE_DIFF_CANCELLED c=20 r=7
2021-03-30 18:58:04 +02:00
3d-gussner
e9750a7312
Update #MSG_FIL_FAILD c=20 r=5
2021-03-30 18:52:58 +02:00
3d-gussner
4a5d7bc6b7
Define #MSG_Y_DIST_FROM_MIN c=20
2021-03-30 18:51:04 +02:00
3d-gussner
2abdfeb4c5
Update #MSG_YES c=3
2021-03-30 18:48:14 +02:00
3d-gussner
7f3fe6740b
Update #MSG_NO_MOVE c=20
2021-03-30 18:46:56 +02:00
3d-gussner
1a1a1d88a7
Update MSG_MOVE_X/Y/Z c=18
2021-03-30 18:13:49 +02:00
3d-gussner
c1f22a5239
Update #MSG_MOVE_AXIS c=18
2021-03-30 18:12:03 +02:00
3d-gussner
99893d5066
Define #MSG_MMU_CONNECTED c=18
2021-03-30 18:11:22 +02:00
3d-gussner
77a7a92a42
Define MSG_MMU_LOAD_FAILED c=20
2021-03-30 18:08:13 +02:00
3d-gussner
4d9dffb042
Define #MSG_MEASURED_SKEW c=13
2021-03-30 18:06:43 +02:00
3d-gussner
1e2dde9a52
Update #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
2021-03-30 18:02:27 +02:00
3d-gussner
afb7c82e26
Update #MSG_LOAD_TO_NOZZLE c=18
2021-03-30 18:00:20 +02:00
3d-gussner
2408bc9f2e
Update MSG_LOADING_COLOR c=20
2021-03-30 17:58:51 +02:00
3d-gussner
62ecbb3ae3
Update #MSG_BABYSTEP_Z c=18
2021-03-30 17:57:50 +02:00
3d-gussner
50e69fcca8
Update #MSG_NO c=3
2021-03-30 17:53:58 +02:00
3d-gussner
75c0de741b
Update #MSG_AUTO_DEPLETE c=13
2021-03-30 17:52:59 +02:00
3d-gussner
ddf47a3cac
Update #MSG_NA c=3, #MSG_OFF c=3, #MSG_ON c=3
2021-03-30 17:51:31 +02:00
3d-gussner
d1813890a8
Update #MSG_STOPPED c=20
2021-03-30 17:49:02 +02:00
3d-gussner
a9ed513979
Update #MSG_STOP_PRINT c=18
2021-03-30 17:48:06 +02:00
3d-gussner
46367c2a33
Update #MSG_STEALTH c=7, #MSG_SILENT c=7, #MSG_NORMAL c=7
2021-03-30 17:46:37 +02:00
3d-gussner
3d848328ed
Update #MSG_AUTO_POWER c=10
2021-03-30 17:42:33 +02:00
3d-gussner
8771519880
Update #MSG_HIGH_POWER c=10
2021-03-30 17:41:51 +02:00
3d-gussner
afabfa789d
Update #MSG_MODE c=6
2021-03-30 17:41:09 +02:00
3d-gussner
dc56b74263
Update #MSG_MODE c=9
2021-03-30 17:39:43 +02:00
3d-gussner
2a08a6e441
Update #MSG_SELFTEST_WIRINGERROR c=17
2021-03-30 17:37:50 +02:00
3d-gussner
e6ea843e62
Update #MSG_SELFTEST_MOTOR c=18
2021-03-30 17:36:39 +02:00
3d-gussner
35b000faea
Update MSG_RESUMING_PRINT c=20
2021-03-30 17:34:36 +02:00
3d-gussner
557486ee0b
Update MSG_REFRESH c=18
2021-03-30 17:34:00 +02:00
3d-gussner
54f594238b
Update #MSG_NOZZLE c=12
2021-03-30 17:33:15 +02:00
3d-gussner
a878056be3
Update MSG_BACK c=18
2021-03-30 17:32:04 +02:00
3d-gussner
610ba9bc45
Update #MSG_CARD_MENU c=18
2021-03-30 17:31:18 +02:00
3d-gussner
5eb14dc433
Update #MSG_MAGNETS_COMP c=13
2021-03-30 17:29:56 +02:00
3d-gussner
12372d6525
Update #MSG_Z_PROBE_NR c=14
2021-03-30 17:28:43 +02:00
3d-gussner
7e2c272839
Update #MSG_MESH c=12
2021-03-30 17:27:02 +02:00
3d-gussner
bc8a23a0c6
Update #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
2021-03-30 17:25:35 +02:00
3d-gussner
3367d7f8fa
Update #MSG_SD_CARD c=8
2021-03-30 17:24:45 +02:00
3d-gussner
e8c3ba89dc
Update #MSG_MMU_MODE c=8
2021-03-30 17:23:29 +02:00
3d-gussner
532c7438d8
Update #MSG_NOZZLE_DIAMETER c=10, MSG_GCODE c=8
2021-03-30 17:19:00 +02:00
3d-gussner
0a634f7d48
Update #MSG_FIRMWARE c=8
2021-03-30 17:16:31 +02:00
3d-gussner
39b8a35f3a
Update #MSG_MODEL c=8
2021-03-30 17:15:48 +02:00
3d-gussner
5b843c3a4d
Update #MSG_STRICT c=8
2021-03-30 17:14:49 +02:00
3d-gussner
f60ba6de87
Update #MSG_WARN c=8
2021-03-30 17:13:56 +02:00
3d-gussner
b465c96327
Update #MSG_NONE c=8
2021-03-30 17:13:09 +02:00
D.R.racer
cdcc06f376
SDFile - fix errorneous offset computation
...
... my fault, I was originally too optimistic about the overflow
Fixes #3077
PFW-1233
2021-03-30 11:33:42 +02:00
DRracer
a251dcc14e
Merge pull request #3064 from 3d-gussner/PFW-1222
...
PFW-1222: Disable M120 M121
2021-03-30 10:09:47 +02:00
DRracer
e76b0c40a8
Merge pull request #3066 from espr14/PFW-1223
...
Calibration: detect biased PINDA and retry calibration PFW-1223
2021-03-30 10:08:16 +02:00
3d-gussner
c4f80642b3
Update #MSG_MAIN c=18
2021-03-30 09:52:52 +02:00
3d-gussner
4417deb9ea
Update #MSG_SOUND_BLIND c=7, #MSG_SOUND_LOUD c=7, MSG_SOUND_ONCE c=7
2021-03-30 09:50:21 +02:00
3d-gussner
e4ed1ffc17
Update #MSG_SOUND c=9
2021-03-30 09:46:20 +02:00
3d-gussner
2ce5d3a840
Update #MSG_RPI_PORT c=13
2021-03-30 09:44:13 +02:00
3d-gussner
2ca8a23e4a
Update #MSG_SORT_ALPHA c=8 #MSG_SORT_TIME c=8
2021-03-30 09:42:53 +02:00
3d-gussner
c85ebb4aa3
Update #MSG_SORT c=7
2021-03-30 09:40:26 +02:00
3d-gussner
440ec49a36
Update #MSG_SETTINGS c=18
2021-03-30 09:38:33 +02:00
3d-gussner
6900c206cd
Define #MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-03-30 09:36:32 +02:00
3d-gussner
12dc48ff1a
Update #MSG_BELTTEST c=18
2021-03-30 09:34:41 +02:00
3d-gussner
b697117654
Update #MSG_SELFTEST c=18
2021-03-30 09:33:49 +02:00
3d-gussner
9bc702ae0a
Update #MSG_SELFTEST_OK c=20
2021-03-30 09:32:27 +02:00
3d-gussner
00fedbb08a
Update MSG_LANGUAGE_SELECT c=18
2021-03-30 09:30:04 +02:00
3d-gussner
164226c739
Define #MSG_RIGHT c=10
2021-03-30 09:29:07 +02:00
3d-gussner
2daf1d9114
Define #MSG_LEFT c=10
2021-03-30 09:26:50 +02:00
3d-gussner
169f8983b6
Define #MSG_ADDITIONAL_SHEETS c=20 r=9
2021-03-30 09:23:35 +02:00
3d-gussner
a82ca3def4
Update #MSG_WATCH c=18
2021-03-30 09:21:50 +02:00
3d-gussner
0139bb5a5e
Update #MSG_CHANGE_SUCCESS c=20
2021-03-30 09:20:57 +02:00
3d-gussner
0e86ab88fd
Update #MSG_FILAMENTCHANGE c=18
2021-03-30 09:20:01 +02:00
3d-gussner
9c0300df66
Update #MSG_HEATING c=20
2021-03-30 09:18:11 +02:00
3d-gussner
280a3c4d3a
Update #MSG_PRUSA3D_HOWTO c=18
2021-03-30 09:16:14 +02:00
3d-gussner
12bd2f1a09
Update #MSG_PRUSA3D c=18
2021-03-30 09:15:21 +02:00
3d-gussner
4e4fb7a59f
Update #MSG_PRUSA3D_FORUM c=18
2021-03-30 09:14:20 +02:00
3d-gussner
10c586b577
Update #MSG_FLOW c=15
2021-03-30 09:13:09 +02:00
3d-gussner
db07d55c29
Define #MSG_MMU_FIX_ISSUE c=20 r=4
2021-03-30 09:11:19 +02:00
3d-gussner
7c9891d85e
Update #MSG_FSENSOR c=12
2021-03-30 09:09:11 +02:00
3d-gussner
7a99f63ffd
Define #MSG_FAIL_STATS c=18
2021-03-30 09:06:59 +02:00
3d-gussner
d427563e2b
Define #MSG_MMU_FAIL_STATS c=18
2021-03-30 09:05:18 +02:00
3d-gussner
1b4241f031
Update #MSG_ERROR c=10
2021-03-30 09:03:38 +02:00
3d-gussner
1b8ca77b0c
Define #MSG_MMU_CUTTING_FIL c=18
2021-03-30 09:01:58 +02:00
3d-gussner
b6031c02a8
Update #MSG_DISABLE_STEPPERS c=18
2021-03-30 08:59:27 +02:00
3d-gussner
69b9acdfc1
Define #MSG_CRASH_RESUME c=20 r=3
2021-03-30 08:57:42 +02:00
3d-gussner
411caddc55
Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-03-30 08:14:46 +02:00
3d-gussner
2d2dc23e81
Define #MSG_CALIBRATING_HOME c=20
2021-03-30 08:12:20 +02:00
3d-gussner
c8af50d344
Define #MSG_COPY_SEL_LANG c=20 r=3
2021-03-30 08:09:08 +02:00
3d-gussner
71638b49fc
Update #MSG_COOLDOWN c=18
2021-03-30 08:05:54 +02:00
3d-gussner
5f9b66a23a
Update #MSG_NOT_COLOR c=19
2021-03-30 08:04:39 +02:00
3d-gussner
02ff05639b
Define MSG_CHECKING_FILE c=17
2021-03-30 08:01:26 +02:00
3d-gussner
f2298b1a46
Update #MSG_SD_REMOVED c=20
2021-03-30 07:57:42 +02:00
3d-gussner
1e2f5c8323
Update #MSG_MENU_CALIBRATION c=18
2021-03-30 07:55:19 +02:00
3d-gussner
3733c42d38
Update #MSG_HOMEYZ_DONE c=20
2021-03-30 07:54:11 +02:00
3d-gussner
79aa6b198d
Update #MSG_HOMEYZ c=18
2021-03-30 07:52:24 +02:00
3d-gussner
fa0382fd3e
Update #MSG_CALIBRATE_BED c=18
2021-03-30 07:50:54 +02:00
3d-gussner
2985c6bd6b
Update #MSG_BED c=13
2021-03-30 07:49:37 +02:00
3d-gussner
7c906dd0b1
Update #MSG_BED_CORRECTION_MENU c=18
2021-03-30 07:44:16 +02:00
3d-gussner
4d464b79f4
Update MSG_BED_HEATING c=20
2021-03-20 17:30:44 +01:00
3d-gussner
3ee23af7b7
Update MSG_BED_DONE c=20
2021-03-20 16:04:52 +01:00
3d-gussner
ba0f2b2501
Update MSG_LOOSE_PULLEY c=20
2021-03-20 07:11:41 +01:00
3d-gussner
3fcc81ebdb
Update MSG_SELFTEST_ENDSTOP c=16
2021-03-20 07:11:07 +01:00
3d-gussner
17df4e1c8d
Update MSG_SELFTEST_ENDSTOPS c=20
2021-03-20 07:10:09 +01:00
3d-gussner
4a6c53daf8
Update MSG_SELFTEST_PLEASECHECK c=20
2021-03-20 07:09:33 +01:00
3d-gussner
b3d3feef4d
Update MSG_SELFTEST_ERROR c=20
2021-03-20 07:08:48 +01:00
3d-gussner
5d167ce813
Update MSG_SELFTEST_NOTCONNECTED c=20
2021-03-20 07:08:20 +01:00
3d-gussner
625604d704
Update MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-03-20 07:07:14 +01:00
3d-gussner
b86ad11b68
Update MSG_SELFTEST_BEDHEATER c=20
2021-03-20 07:06:37 +01:00
3d-gussner
b3b062e4ba
Update MSG_SELFTEST_SWAPPED c=16
2021-03-20 07:05:47 +01:00
3d-gussner
b6684f6114
Update MSG_SELFTEST_AXIS c=16
2021-03-20 07:05:03 +01:00
3d-gussner
bc9f6b6ae6
Update MSG_SELFTEST_AXIS_LENGTH c=20
2021-03-20 07:03:47 +01:00
3d-gussner
83cbfda113
Update MSG_AUTO_HOME c=18
2021-03-20 07:02:43 +01:00
3d-gussner
fe1b4e50be
Update MSG_AMBIENT c=14
2021-03-20 06:59:54 +01:00
3d-gussner
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
3d-gussner
1c965cd988
Update MSG_MEASURED_OFFSET c=20
2021-03-20 06:18:41 +01:00
3d-gussner
92acac453f
Update MSG_MMU_POWER_FAILS c=15
2021-03-20 06:16:11 +01:00
3d-gussner
2a848923ea
Update MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
...
as Dutch translation is longer
2021-03-19 18:50:29 +01:00
3d-gussner
baabc0bd1e
Fix typo "didnt" to "didn't"
2021-03-19 18:49:13 +01:00
3d-gussner
b806c017cb
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:58 +01:00
3d-gussner
542ff58529
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:09 +01:00
3d-gussner
147fddd060
Update MSG_CALIBRATE_BED_RESET c=18
2021-03-19 18:41:01 +01:00
3d-gussner
6300211268
Update MSG_PLACE_STEEL_SHEET c=20 r=5
...
as Italian translation is longer
2021-03-19 18:37:23 +01:00
3d-gussner
79a148bb14
Update #MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
...
as Italian translation is longer
2021-03-19 18:34:39 +01:00
3d-gussner
9e60953d44
Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
...
as French translation is longer
2021-03-19 18:14:03 +01:00
3d-gussner
a09f2c2f2d
Update "G-code sliced for a newer firmware. Continue?"
...
as French translation is longer
2021-03-19 18:12:16 +01:00
3d-gussner
41022d7d60
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
...
as French translation is longer
2021-03-19 18:07:04 +01:00
3d-gussner
813aabab56
Update "Select nozzle preheat temperature which matches your material." c=20 r=6
...
as Spanish translation is longer
2021-03-19 18:03:06 +01:00
3d-gussner
d52a7326be
Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6
...
as German translation is longer
2021-03-19 17:55:03 +01:00
3d-gussner
cc29a9485e
Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c=20 r=9
...
as German translation is longer
2021-03-19 17:52:54 +01:00
3d-gussner
03a13ace5a
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9
...
as French translation is longer
2021-03-19 17:47:35 +01:00
3d-gussner
17c015f5c0
Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5
2021-03-19 17:44:07 +01:00
3d-gussner
ba9e26f444
Update #MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
2021-03-19 17:37:24 +01:00
3d-gussner
1bba2255c1
Update MSG_WAITING_TEMP c=20 r=4
2021-03-19 17:34:15 +01:00
3d-gussner
bab4994b89
Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=2
2021-03-19 16:52:24 +01:00
3d-gussner
6a54196862
Update "Now remove the test print from steel sheet." c=20 r=4
2021-03-19 16:42:21 +01:00
3d-gussner
8cbf0b3318
Update "Crash detected. Resume print?" c=20 r=2
2021-03-19 16:38:53 +01:00
3d-gussner
891861d475
Update "G-code sliced for a different level. Continue?" c= r= values
2021-03-19 16:35:53 +01:00
3d-gussner
f9a92e2277
Update "Y distance from min" c=20
2021-03-19 16:32:13 +01:00
3d-gussner
1f6834204f
Update "Select filament:" c= value
2021-03-19 16:30:04 +01:00
3d-gussner
cbe2a4d301
Update MSG_CHECK_IDLER c=20 r=5
2021-03-19 16:22:05 +01:00
3d-gussner
4dc99d970d
Update "MMU needs user attention." c= r= values
2021-03-19 16:17:26 +01:00
3d-gussner
0928c3d133
Update "Lin. correction" c=18
2021-03-19 16:14:16 +01:00
3d-gussner
ce42f2c2a5
Update MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
2021-03-19 16:11:42 +01:00
3d-gussner
5f9d6a0401
Update "Fail stats" c=18
2021-03-19 16:08:57 +01:00
3d-gussner
878200ecae
Update "Fail stats MMU" c=18
2021-03-19 16:06:54 +01:00
3d-gussner
5cbb5b0e17
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values
2021-03-19 15:53:36 +01:00
