Robert Pelnar
0d269261e4
PFW-110 - load filament - beep when loading finished.
2018-01-10 18:50:16 +01:00
Robert Pelnar
43010b30b4
Build 143f
...
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
2018-01-09 19:54:07 +01:00
Robert Pelnar
0a2087c1cb
build 143e
...
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
2018-01-04 18:08:22 +01:00
Robert Pelnar
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
Michal Průša
734639c1da
Unload filament tweak
...
unload filament now has longer and faster slow retract.
2017-12-29 17:53:12 +01:00
Phil Dubach
7fb1234855
Turn off bed heater after temp calibration
...
After finishing the temperature calibration, turn off the bed heater
right away, before waiting for the user to acknowledge completion.
2017-12-28 23:47:27 -08:00
Michal Průša
f71f133e80
power panic polished
...
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
2017-12-28 23:26:06 +01:00
Michal Průša
f1c741d027
Filament autoloading improved and minor tweaks
...
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)
Autoloading now unable to turn on when filament sensor is turned off or not responding
Color not right changed to color not correct to avoid slight confusion
2017-12-28 18:59:57 +01:00
Robert Pelnar
bd58718d9d
dummy "ok" response
...
build 139 (RC4)
2017-12-28 02:45:05 +01:00
Robert Pelnar
e064133a04
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-28 01:37:13 +01:00
Robert Pelnar
546314fda7
Removed debug messages from serial comunication (octoprint...).
...
build 137b
2017-12-27 20:29:24 +01:00
PavelSindler
8f7a50cfcd
Merge pull request #343 from PavelSindler/m110_fix
...
M110 fix
2017-12-23 00:04:11 +01:00
PavelSindler
e8477b525c
initial version of M110 fix (port from MK2)
2017-12-22 22:34:57 +01:00
XPila
257b8e9f59
Merge pull request #342 from XPila/MK3
...
Mk3 - RC3
2017-12-22 20:35:15 +01:00
Robert Pelnar
6abba7bfe9
filament autoload - better detection algorithm, autoload in M600 from menu
...
unload menu always visible
2017-12-22 20:14:26 +01:00
PavelSindler
7114772784
whitespace
2017-12-22 19:23:11 +01:00
PavelSindler
3aca1271ed
serial resend request always contains OK
2017-12-22 18:54:55 +01:00
PavelSindler
6f7a2ba263
Merge pull request #340 from PavelSindler/MK3_for_merging
...
removed some serial line error messages
2017-12-22 13:35:33 +01:00
PavelSindler
1917b6a1d7
removed some serial line error messages which caused that octoprint changed status
2017-12-22 13:27:04 +01:00
PavelSindler
33d715616f
Merge pull request #339 from PavelSindler/MK3_for_merging
...
setup function
2017-12-21 13:42:22 +01:00
PavelSindler
71bb4022dc
setup function
2017-12-21 13:40:16 +01:00
Robert Pelnar
3ddbac6056
LCD_PWM removed (will be solved other way)
2017-12-21 01:00:49 +01:00
PavelSindler
f227952c0b
Merge branch 'MK3' into MK3
2017-12-21 00:07:01 +01:00
PavelSindler
b8fd058749
selftest fix
2017-12-21 00:03:41 +01:00
PavelSindler
17d9bb205a
selftest tests filament sensor, selftest messages have language variants
2017-12-20 23:40:18 +01:00
Robert Pelnar
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
Robert Pelnar
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
PavelSindler
31add2e69f
removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function
2017-12-18 19:15:36 +01:00
Robert Pelnar
c6e10fb903
Removed SG software homming
...
After Calibration Z enabled minstop (SG and PINDA)
TMC2130 code simplification
2017-12-15 14:10:20 +01:00
Robert Pelnar
ca55cf74e2
Merge remote-tracking branch 'upstream/MK3' into MK3
...
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
2017-12-13 22:58:34 +01:00
Robert Pelnar
356bc403b1
Automatic filament load when printer idle and preheated
2017-12-13 17:39:32 +01:00
Robert Pelnar
cdeb835b5d
Failstat couters initialization
...
build number = 131
2017-12-12 23:37:31 +01:00
PavelSindler
fde0efc75c
power panic for absolute E coordinates: initial version
2017-12-12 21:20:59 +01:00
PavelSindler
c1416cbb33
Merge pull request #312 from PavelSindler/wizard
...
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
2017-12-12 20:24:15 +01:00
PavelSindler
82dffb688a
force high power mode during xyz cal. and selftest
2017-12-12 20:21:09 +01:00
PavelSindler
997c8de161
shipping prep. reset sets wizard flag, shipping prep wizard improvements
2017-12-12 19:17:37 +01:00
PavelSindler
f8e3c76315
merging new changes from upstream/MK3
2017-12-12 17:14:48 +01:00
Robert Pelnar
0271da3c67
Ambient thermistor - new table (PFW-71)
...
Crashdetection disable durring print (PI3M3-42)
Stealth mode - better limit values (PI3M3-5)
2017-12-12 15:44:42 +01:00
Robert Pelnar
7204e91ec6
Filament sensor not responding - (PFW-41)
...
build number = 130
2017-12-11 18:17:25 +01:00
PavelSindler
20de899d25
Merge branch 'MK3' into sort_files
2017-12-11 11:50:47 +01:00
Robert Pelnar
9dba7dcd1f
DISABLE_M42_M226 = +56 bytes RAM (because of stack overflow)
...
build 127
2017-12-09 19:31:27 +01:00
PavelSindler
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
PavelSindler
071873b38a
init; last merged file: Marlin_main.cpp
2017-12-06 17:48:16 +01:00
PavelSindler
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
Robert Pelnar
58f8fdb51b
Automatic filament load in M600
2017-12-05 18:37:03 +01:00
Robert Pelnar
0de584c213
bugfix UVLO - extruder position from stepper
2017-11-29 02:08:15 +01:00
Robert Pelnar
9413eca52c
UVLO recover E absolute mode
...
build number 119
2017-11-28 23:41:58 +01:00
XPila
1da1eaea01
Merge pull request #117 from PavelSindler/m600
...
M600: wait for user before unloading filament
2017-11-28 22:45:57 +01:00
Robert Pelnar
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
PavelSindler
020a7ec257
unload filament can be repeated
2017-11-28 19:04:43 +01:00
PavelSindler
c0112f05e1
M600: wait for user before unloading filament
2017-11-28 18:28:53 +01:00
PavelSindler
211725c946
dont show temp cal message, dont save uvlo flag to eeprom if printing from USB
2017-11-27 18:30:16 +01:00
Robert Pelnar
7c8de94778
filament unload - initial
...
lower currents for power panic
2017-11-27 15:54:36 +01:00
Robert Pelnar
533418d63e
opravene nezadouci resetovani watchdogem
...
powerpanic Z shift = 0.64mm (misto 1.92mm)
teplotni kompenzace default = ON
2017-11-27 14:43:56 +01:00
XPila
60930beb52
Merge pull request #108 from PavelSindler/power_panic
...
Power panic works with folders
2017-11-27 07:27:17 +01:00
Robert Pelnar
1113124bde
PINDA calibration and precalibrated characteristics.
2017-11-27 07:09:53 +01:00
PavelSindler
42b533b5d8
first working version
2017-11-27 06:20:51 +01:00
PavelSindler
a40c759ee7
First run: show calibration status messages in case that user refused to use wizard
2017-11-27 02:03:42 +01:00
PavelSindler
5a77113fb5
init
2017-11-27 01:59:47 +01:00
PavelSindler
7de187d813
if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom
2017-11-27 00:17:45 +01:00
PavelSindler
4c7cc5520e
"confirm nozzle clean" message re-added
2017-11-26 21:26:36 +01:00
Robert Pelnar
e5fee387db
Fixed bug - unload filament restarts the printer.
2017-11-26 17:14:39 +01:00
Robert Pelnar
f2e9bdef24
Fsensor synchronization and triggering improved
...
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
2017-11-24 21:53:35 +01:00
Robert Pelnar
213ee43cc9
Merge usptream
...
Crashdetection fixed
pl language removed (because of low flash capacity)
build number = 110
2017-11-22 08:41:52 +01:00
PavelSindler
ae6a0b4d29
Initial message changed. Needs to be updated in bootlader.
2017-11-21 14:16:55 +01:00
Robert Pelnar
b8525f8043
Print class printf function (experimental, disabled by default)
...
LiquidCrystal VT100 escape codes (EraseScreen, CursorHome, ...)
Stream support for lcd and uart, fprintf and printf (stdout=uartout)
Dcodes enabled, code reduced, printf used
Splash screen with esc codes
2017-11-20 20:09:54 +01:00
Robert Pelnar
aee62750e7
Build 109
2017-11-16 22:03:36 +01:00
XPila
279ea79bf6
Merge pull request #86 from PavelSindler/keepalive_messages
...
host keep alive messages
2017-11-16 20:53:09 +01:00
XPila
2a85de48ea
Merge pull request #88 from XPila/MK3
...
Mk3
2017-11-16 20:52:46 +01:00
Robert Pelnar
ee2f927148
Build Number = 108
...
FSensor log can be enabled with D9125L1
Selftest menu
PINDA D codes
2017-11-16 20:51:50 +01:00
PavelSindler
16a7adfe33
merging with upstream
2017-11-15 15:45:26 +01:00
PavelSindler
91d125369e
keepalive messages initial version
2017-11-15 15:09:29 +01:00
PavelSindler
19d89b37b5
Merge pull request #83 from PavelSindler/lin_adv_fix
...
Lin adv. fix from MK2 fw
2017-11-15 11:53:39 +01:00
PavelSindler
9e2533ecdf
Support menu translated and fixes, snmm M600 long beep fix
2017-11-14 16:10:10 +01:00
PavelSindler
4d9780a3c6
Merged lin adv. fix from MK2
2017-11-14 13:57:32 +01:00
XPila
dfe3541d2b
Merge branch 'MK3' into MK3
2017-11-13 18:48:19 +01:00
Robert Pelnar
01de834e0d
SG_THR_X = 2, holding currents == running currents
...
Farm preheat menu
dcode D5 - read/write/erase FLASH
dcode D6 - bootloader update test (for new stk500-prusa)
_NO_ASM - MINGW simulator support
fixed bug - "Fil. sensor [on/off]" menu
Build number = 107
2017-11-13 18:45:11 +01:00
PavelSindler
eda0c6bd39
english version of xyz: place/remove steel sheet; wait for cooling down removed,
2017-11-13 17:09:26 +01:00
PavelSindler
5707f8b14e
Merge remote-tracking branch 'upstream/MK3' into wizard
2017-11-13 14:39:14 +01:00
PavelSindler
fbbcc27f1a
X max lowered to 250, XYZ/Z calibration: Z top coordinate changed, changes in xyz cal. because of stell sheet, still not final version
2017-11-12 11:30:06 +01:00
XPila
55325a5a32
Merge branch 'MK3' into MK3
2017-11-07 17:15:27 +01:00
PavelSindler
2e68770e62
initial version - messages missing (will not compile)
2017-11-07 16:49:04 +01:00
PavelSindler
c36b7be90c
SUPPORT_VERBOSITY initial version
2017-11-07 11:36:41 +01:00
PavelSindler
461675b806
Merge pull request #78 from PavelSindler/4point_xyz_cal
...
4point xyz cal.
2017-11-07 10:02:32 +01:00
michalprusa
967594edf0
Added G-CODE "PRUSA FAN" to report RPM of both fans
2017-11-03 20:27:52 +01:00
Robert Pelnar
877c8a3978
TMC2130 configuration in eeprom (not finished).
...
Extruder and Z holding currents same as running currents.
M600 filament unload speed = 3500 (PFW-22).
FSensor - algorithm changed (reset error couter instead of decrement)
build number = 106
2017-10-30 15:45:29 +01:00
PavelSindler
1ee6016fa0
Merge remote-tracking branch 'upstream/MK3' into 4point_xyz_cal
2017-10-30 11:48:45 +01:00
Robert Pelnar
bd7c3d08f3
Marlin_main - lineending CRLF -> LF
2017-10-27 17:07:02 +02:00
PavelSindler
c4d7b801b9
Initial version. XYZ cal works, but bed ref. points coordinates must be checked.
2017-10-27 16:12:37 +02:00
PavelSindler
d37c925bc0
Merge branch 'MK3' into print_fan_speed
2017-10-26 18:04:38 +02:00
PavelSindler
f4d5d891df
measuring pulse width: initial version
2017-10-26 17:42:27 +02:00
Robert Pelnar
cddb0eafb8
PAT9125 - sampled only Y value, new debug code D9125.
...
FSensor - synchronous sampling and new algorithm
build number = 103
2017-10-24 19:45:15 +02:00
Robert Pelnar
8734961e0e
M114 now reports also actual extruder position,
...
PAT9125 HWI2C (Wire) support,
fsensor implementation into separate file
build number = 102
2017-10-22 22:42:45 +02:00
michalprusa
c3585bc696
Automatic recovery typo fix
...
Failures statistics in eeprom
2017-09-26 14:14:17 +01:00
michalprusa
5ff28682be
Automatic recovery after crash is detected
2017-09-26 11:48:46 +01:00
Robert Pelnar
b475d11bdb
Maker Faire brainstorm 2.0 (2)
...
Automatic recover after short power loss (according to heatbed temperature drop)
Adjusted crashdetection - TMC2130_TCOOLTHRS_X and TMC2130_TCOOLTHRS_Y = 450 to be enabled at low speed
!!!ALL FEATURES TESTED AT THIS POINT!!!
2017-09-26 06:11:42 +02:00
Robert Pelnar
89121e6e34
Maker Faire brainstorm 2.0
...
Added filament sensor and crash detection to EEPROM
Added crash-detection counters display disable directive
Added Restore/Save print directive
Added crash detection and filament sensor settings to Tune menu
2017-09-26 04:30:10 +02:00
Robert Pelnar
73cc1c9c8a
initial state of crash detect and filament sensor is ON
...
slowed down return speed from crash detect after home
Added babystep apply after return from crash detect (don’t know if it’s accurate)
Added D10 to set machine to XYZ correctly calibrated
Added resume debug directive to mask additional menu item
2017-09-26 03:21:33 +02:00
Robert Pelnar
39f6e746dc
Crashdetection tunning.
2017-09-26 01:43:56 +02:00
bubnikv
c6e9896257
Changed the homing routine to avoid crashing into the right end stop.
2017-09-25 15:20:39 +02:00
