3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,279 Commits 3 Branches 78 Tags 40 MiB
86235259a3
Commit Graph

4064 Commits

Author SHA1 Message Date
Voinea Dragos
6d7d8c7c75 Do not show hidden/system dirs with M20 L 2021-04-19 13:31:30 +03:00
Yuri D'Elia
a5e4df390d Sync before/after setting mesh_bed_leveling_flag/homing_flag 
mesh_bed_leveling_flag and homing_flag should be set only when the
planner is empty as a consequence of #3100, since any operation executed
*while* the mbl/homing flag is set is considered part of the compound
instruction that generated it (G80, G28, G30, G76).

Failure in doing so can result in instructions just prior being lost,
since they're incorrectly discarded (assumed to be redone).

G1  ; lost ..
G80 ; .. if PP happens here
 2021-04-19 06:31:57 +02:00
Yuri D'Elia
23c75da727 Fix Crash/PP recovery position on instructions with comments 
PR #2967 altered the way ``sdpos_atomic`` was set, causing issues in the
crashdetect/powerpanic recovery offset if the instruction being
recovered happens to contain a comment.

Previously ``sdpos`` was assumed to be a single byte prior to the last
read character. sdpos+1 would thus position the index to the next
instruction. With gcode-filtering in place, sdpos is left just before
the comment, while the actual read position is at the newline. This
causes to parser to resume in the middle of the comment.

Change the value returned by cardreader::get_sdpos() to always return
the last read position, as everybody expects (!!).

This avoids the +1, and correctly sets the resume position to the next
valid instruction without overhead.
 2021-04-19 06:30:37 +02:00
D.R.racer
c43688a549 Version changed (3.10.0-RC2 build 4104) 2021-04-16 13:52:36 +02:00
DESKTOP-AFI832L\admin
5a91e1de4d Calibration: fix checking of scan of calibration points 
PFW-1223
 2021-04-14 06:25:18 +02:00
Voinea Dragos
7356cd0811 EEPROM_JOB_ID 2021-04-09 08:09:51 +02:00
DRracer
f9f6284c50
Merge pull request #3100 from wavexx/powerpanic_state_fixes 
Fix PowerPanic and Crash Detection during homing and bed leveling
 2021-04-07 18:19:50 +02:00
Yuri D'Elia
61faa49cbb Fix buffer overflow in buf 
Fix cmd overflow introduced in 186ce0f.

With a precision of %f being .6 and assuming a maximum (theoretical)
acceleration of 99999 we need 47 bytes including terminating byte.

Round it to 48
 2021-04-07 15:57:50 +02:00
Alex Voinea
d31601dcb8 Use correct mfrid for gd25q20c 2021-04-06 10:16:47 +02:00
Alex Voinea
94c1e65d83 Fix MK2.x builds 2021-04-06 10:16:47 +02:00
Alex Voinea
56948157d0 GD25Q40C xflash support 2021-04-06 10:16:47 +02:00
Alex Voinea
07bf4bbe48 Fix gd25120c rd_uid command 2021-04-06 10:16:47 +02:00
Alex Voinea
9454f9d8ec Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
Yuri D'Elia
449d181971 G80: handle power panic 
This is handled in the same way crash detection is handled: homing/mbl
invalidates saved_target _and_ current position.

Fixes PP recovery during MBL and homing.
 2021-04-06 02:20:00 +02:00
Yuri D'Elia
b46a52ffa8 G80: Handle crash detection 
At a higher level, crash detection will repeat the last gcode command.

Some commands such as G28 or G80 need to be repeated in full and require
special handling.

In such cases, do not store the saved target coordinate (which is fake
in such cases) and invalidate the saved position.

This fixes the last coordinate of the first G1 move after recovery.

We also avoid moving from the origin when the saved position is
invalidated, which is not strictly necessary, but saves some time.
 2021-04-06 02:00:47 +02:00
Yuri D'Elia
a5530593fa G80: preserve lcd status and message when aborting 
Restore the old status just before returning, so that the subsequent G80
can restore the first (initial) message correctly.
 2021-04-06 00:31:56 +02:00
Yuri D'Elia
5923276a86 G80: correctly abort during crash detection 
Crash detection is handled at a higher level (which automatically
repeats the current command), however we still need to abort the current
command correctly.

Handle XY crashes by checking the planner status after st_synchronize().
 2021-04-06 00:31:29 +02:00
Yuri D'Elia
5da39df968 G80: Use consistent XY axis feedrate 2021-04-06 00:10:33 +02:00
Yuri D'Elia
ce2e35d14d Move G80 into it's own function 
No actual changes done in the function in this, besides break->return.

In G28, simply call the new function instead of using goto, making the
code more readable.

Also remove the senseless comments in G28 about command queuing (dating
back to when G80 was queued instead of being executed).
 2021-04-05 23:35:17 +02:00
Yuri D'Elia
d2be40491b PP recovery: clamp initial position to software endstops 
As done when initializing the printer from a cold start, we need to
clamp the starting position to software endstops before setting the
planner position since 0,0 is frequently out-of-bounds.

This avoids an useless move during recovery that can cause a crash:

- Initial X is set to be 0
- G1 performed by homing will clamp X>=0, resulting in a positive shift
- If X is already at max X (extruder being parked due to PP), this will
  slam at X+, causing an immediate crash.
 2021-04-05 22:11:06 +02:00
Yuri D'Elia
3276320a06 Hide tmc2130_sg_change behind DEBUG_CRASHDET_COUNTERS 
tmc2130_sg_change is only used for debugging purposes.
Hide definition and usage behind the required define.
 2021-04-05 20:07:03 +02:00
Yuri D'Elia
6a61c26955 Removed unused crashdet_stop_and_save_print2 2021-04-05 20:04:50 +02:00
3d-gussner
b74e1d6062 Update RepRap url for M123 2021-04-01 19:48:14 +02:00
3d-gussner
e12c1dde5c Updated RepRap Wiki and removed the @todos 2021-04-01 19:06:31 +02:00
3d-gussner
3b431bcbc1 Fix output "Y distance from min" by removing ":" so translations can use 20 chars 2021-03-31 08:54:16 +02:00
3d-gussner
d864a5cfdb Define #MSG_PRINTER_IP c=18 2021-03-31 08:46:17 +02:00
3d-gussner
9922774fa7 Cleanup some comments ////c= 2021-03-31 08:11:19 +02:00
3d-gussner
8e74cbce58 Remove r=1 and some minor fixes 2021-03-31 08:07:42 +02:00
3d-gussner
fb691b44b4 Update #MSG_INFO_SENSORS c=18 2021-03-31 07:51:22 +02:00
3d-gussner
3fb90be46f Define #MSG_SELECT c=18 2021-03-31 07:50:18 +02:00
3d-gussner
9a0e67c1d7 Define #MSG_RENAME c=18 2021-03-31 07:43:48 +02:00
3d-gussner
15919a0f09 Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9 2021-03-31 07:41:21 +02:00
3d-gussner
cdfc40fb62 Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3 2021-03-31 07:38:41 +02:00
3d-gussner
c0869efc76 Define #MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4, #MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4 2021-03-31 07:36:26 +02:00
3d-gussner
268d4020cf Define #MSG_FINDA c=5 and update #MSG_PINDA c=5 2021-03-31 07:32:43 +02:00
3d-gussner
c0b8eef6cd Define #MSG_FALSE_TRIGGERING c=20 2021-03-31 07:29:42 +02:00
3d-gussner
1ca443f1f4 Define #MSG_CHECKS c=18 2021-03-31 07:28:18 +02:00
3d-gussner
5e049283be Define #MSG_UNKNOWN c=13 2021-03-31 07:24:41 +02:00
3d-gussner
982153fee1 Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19 2021-03-31 07:16:36 +02:00
3d-gussner
7a88ce89e4 Update MSG_TEMPERATURE c=18 2021-03-31 07:11:01 +02:00
3d-gussner
c0df79d39a Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4 2021-03-31 07:10:03 +02:00
3d-gussner
7268f6a824 Define #MSG_SELECT_FILAMENT c=20 2021-03-31 07:08:09 +02:00
3d-gussner
2e43234d3f Update #MSG_SUPPORT c=18 2021-03-31 07:06:46 +02:00
3d-gussner
ba38262109 Update #MSG_STATISTICS c=18 2021-03-31 07:05:28 +02:00
3d-gussner
960ebac02d Update #MSG_SPEED c=15 2021-03-31 07:04:47 +02:00
3d-gussner
b52d87e9a5 Define #MSG_Z-LEVELING_ENFORCED c=20 r=4 2021-03-31 07:02:42 +02:00
3d-gussner
acbdc2ac8d Define #MSG_RUNOUTS c=7 2021-03-31 06:59:16 +02:00
3d-gussner
09f4850a8a Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13 2021-03-31 06:53:04 +02:00
3d-gussner
4749dd1750 Define #MSG_CHECK_IR_CONNECTION c=20 r=4 2021-03-31 06:46:43 +02:00
3d-gussner
bd8ab39b39 Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4 2021-03-31 06:45:33 +02:00
3d-gussner
5280a89fba Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6 2021-03-31 06:43:21 +02:00
3d-gussner
0d48a32e87 Define #MSG_RESUME_NOZZLE_TEMP c=20 r=4 2021-03-31 06:41:17 +02:00
3d-gussner
4f394c8c5a Update #MSG_TUNE c=18, #MSG_PREHEAT c=18 2021-03-31 06:38:50 +02:00
3d-gussner
fbecae1707 Update MSG_PREHEAT c=18 2021-03-31 06:38:06 +02:00
3d-gussner
ac810bf03a Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3 2021-03-31 06:36:28 +02:00
3d-gussner
00b100bf26 Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10 2021-03-31 06:30:00 +02:00
3d-gussner
baf231b0f1 Update MSG_NO_CARD c=18 2021-03-31 06:23:18 +02:00
3d-gussner
1c09e8411d Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes 2021-03-30 19:30:26 +02:00
3d-gussner
6a266d497b Define #MSG_REMOVE_TEST_PRINT c=20 r=4 2021-03-30 19:19:43 +02:00
3d-gussner
5fcc731be1 Define #MSG_INSERT_FIL c=20 r=6 2021-03-30 19:17:48 +02:00
3d-gussner
243fa68745 Define #MSG_LIN_CORRECTION c=18 2021-03-30 19:16:11 +02:00
3d-gussner
44f7be134d Define #MSG_FS_VERIFIED c=20 r=3 2021-03-30 19:13:31 +02:00
3d-gussner
bcdaecb46d Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20 2021-03-30 19:10:56 +02:00
3d-gussner
de9697b913 Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20 2021-03-30 19:06:46 +02:00
3d-gussner
d601355d40 Define #MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5, #MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8 2021-03-30 19:01:24 +02:00
3d-gussner
669ab0f7f7 Define #MSG_GCODE_DIFF_CONTINUE c=20 r=4, #MSG_GCODE_DIFF_CANCELLED c=20 r=7 2021-03-30 18:58:04 +02:00
3d-gussner
e9750a7312 Update #MSG_FIL_FAILD c=20 r=5 2021-03-30 18:52:58 +02:00
3d-gussner
4a5d7bc6b7 Define #MSG_Y_DIST_FROM_MIN c=20 2021-03-30 18:51:04 +02:00
3d-gussner
2abdfeb4c5 Update #MSG_YES c=3 2021-03-30 18:48:14 +02:00
3d-gussner
7f3fe6740b Update #MSG_NO_MOVE c=20 2021-03-30 18:46:56 +02:00
3d-gussner
1a1a1d88a7 Update MSG_MOVE_X/Y/Z c=18 2021-03-30 18:13:49 +02:00
3d-gussner
c1f22a5239 Update #MSG_MOVE_AXIS c=18 2021-03-30 18:12:03 +02:00
3d-gussner
99893d5066 Define #MSG_MMU_CONNECTED c=18 2021-03-30 18:11:22 +02:00
3d-gussner
77a7a92a42 Define MSG_MMU_LOAD_FAILED c=20 2021-03-30 18:08:13 +02:00
3d-gussner
4d9dffb042 Define #MSG_MEASURED_SKEW c=13 2021-03-30 18:06:43 +02:00
3d-gussner
1e2dde9a52 Update #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3 2021-03-30 18:02:27 +02:00
3d-gussner
afb7c82e26 Update #MSG_LOAD_TO_NOZZLE c=18 2021-03-30 18:00:20 +02:00
3d-gussner
2408bc9f2e Update MSG_LOADING_COLOR c=20 2021-03-30 17:58:51 +02:00
3d-gussner
62ecbb3ae3 Update #MSG_BABYSTEP_Z c=18 2021-03-30 17:57:50 +02:00
3d-gussner
50e69fcca8 Update #MSG_NO c=3 2021-03-30 17:53:58 +02:00
3d-gussner
75c0de741b Update #MSG_AUTO_DEPLETE c=13 2021-03-30 17:52:59 +02:00
3d-gussner
ddf47a3cac Update #MSG_NA c=3, #MSG_OFF c=3, #MSG_ON c=3 2021-03-30 17:51:31 +02:00
3d-gussner
d1813890a8 Update #MSG_STOPPED c=20 2021-03-30 17:49:02 +02:00
3d-gussner
a9ed513979 Update #MSG_STOP_PRINT c=18 2021-03-30 17:48:06 +02:00
3d-gussner
46367c2a33 Update #MSG_STEALTH c=7, #MSG_SILENT c=7, #MSG_NORMAL c=7 2021-03-30 17:46:37 +02:00
3d-gussner
3d848328ed Update #MSG_AUTO_POWER c=10 2021-03-30 17:42:33 +02:00
3d-gussner
8771519880 Update #MSG_HIGH_POWER c=10 2021-03-30 17:41:51 +02:00
3d-gussner
afabfa789d Update #MSG_MODE c=6 2021-03-30 17:41:09 +02:00
3d-gussner
dc56b74263 Update #MSG_MODE c=9 2021-03-30 17:39:43 +02:00
3d-gussner
2a08a6e441 Update #MSG_SELFTEST_WIRINGERROR c=17 2021-03-30 17:37:50 +02:00
3d-gussner
e6ea843e62 Update #MSG_SELFTEST_MOTOR c=18 2021-03-30 17:36:39 +02:00
3d-gussner
35b000faea Update MSG_RESUMING_PRINT c=20 2021-03-30 17:34:36 +02:00
3d-gussner
557486ee0b Update MSG_REFRESH c=18 2021-03-30 17:34:00 +02:00
3d-gussner
54f594238b Update #MSG_NOZZLE c=12 2021-03-30 17:33:15 +02:00
3d-gussner
a878056be3 Update MSG_BACK c=18 2021-03-30 17:32:04 +02:00
3d-gussner
610ba9bc45 Update #MSG_CARD_MENU c=18 2021-03-30 17:31:18 +02:00
3d-gussner
5eb14dc433 Update #MSG_MAGNETS_COMP c=13 2021-03-30 17:29:56 +02:00
3d-gussner
12372d6525 Update #MSG_Z_PROBE_NR c=14 2021-03-30 17:28:43 +02:00
3d-gussner
7e2c272839 Update #MSG_MESH c=12 2021-03-30 17:27:02 +02:00
3d-gussner
bc8a23a0c6 Update #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8 2021-03-30 17:25:35 +02:00
3d-gussner
3367d7f8fa Update #MSG_SD_CARD c=8 2021-03-30 17:24:45 +02:00
3d-gussner
e8c3ba89dc Update #MSG_MMU_MODE c=8 2021-03-30 17:23:29 +02:00
3d-gussner
532c7438d8 Update #MSG_NOZZLE_DIAMETER c=10, MSG_GCODE c=8 2021-03-30 17:19:00 +02:00
3d-gussner
0a634f7d48 Update #MSG_FIRMWARE c=8 2021-03-30 17:16:31 +02:00
3d-gussner
39b8a35f3a Update #MSG_MODEL c=8 2021-03-30 17:15:48 +02:00
3d-gussner
5b843c3a4d Update #MSG_STRICT c=8 2021-03-30 17:14:49 +02:00
3d-gussner
f60ba6de87 Update #MSG_WARN c=8 2021-03-30 17:13:56 +02:00
3d-gussner
b465c96327 Update #MSG_NONE c=8 2021-03-30 17:13:09 +02:00
D.R.racer
cdcc06f376 SDFile - fix errorneous offset computation 
... my fault, I was originally too optimistic about the overflow

Fixes #3077

PFW-1233
 2021-03-30 11:33:42 +02:00
DRracer
a251dcc14e
Merge pull request #3064 from 3d-gussner/PFW-1222 
PFW-1222: Disable M120 M121
 2021-03-30 10:09:47 +02:00
DRracer
e76b0c40a8
Merge pull request #3066 from espr14/PFW-1223 
Calibration: detect biased PINDA and retry calibration PFW-1223
 2021-03-30 10:08:16 +02:00
3d-gussner
c4f80642b3 Update #MSG_MAIN c=18 2021-03-30 09:52:52 +02:00
3d-gussner
4417deb9ea Update #MSG_SOUND_BLIND c=7, #MSG_SOUND_LOUD c=7, MSG_SOUND_ONCE c=7 2021-03-30 09:50:21 +02:00
3d-gussner
e4ed1ffc17 Update #MSG_SOUND c=9 2021-03-30 09:46:20 +02:00
3d-gussner
2ce5d3a840 Update #MSG_RPI_PORT c=13 2021-03-30 09:44:13 +02:00
3d-gussner
2ca8a23e4a Update #MSG_SORT_ALPHA c=8 #MSG_SORT_TIME c=8 2021-03-30 09:42:53 +02:00
3d-gussner
c85ebb4aa3 Update #MSG_SORT c=7 2021-03-30 09:40:26 +02:00
3d-gussner
440ec49a36 Update #MSG_SETTINGS c=18 2021-03-30 09:38:33 +02:00
3d-gussner
6900c206cd Define #MSG_SEL_PREHEAT_TEMP c=20 r=6 2021-03-30 09:36:32 +02:00
3d-gussner
12dc48ff1a Update #MSG_BELTTEST c=18 2021-03-30 09:34:41 +02:00
3d-gussner
b697117654 Update #MSG_SELFTEST c=18 2021-03-30 09:33:49 +02:00
3d-gussner
9bc702ae0a Update #MSG_SELFTEST_OK c=20 2021-03-30 09:32:27 +02:00
3d-gussner
00fedbb08a Update MSG_LANGUAGE_SELECT c=18 2021-03-30 09:30:04 +02:00
3d-gussner
164226c739 Define #MSG_RIGHT c=10 2021-03-30 09:29:07 +02:00
3d-gussner
2daf1d9114 Define #MSG_LEFT c=10 2021-03-30 09:26:50 +02:00
3d-gussner
169f8983b6 Define #MSG_ADDITIONAL_SHEETS c=20 r=9 2021-03-30 09:23:35 +02:00
3d-gussner
a82ca3def4 Update #MSG_WATCH c=18 2021-03-30 09:21:50 +02:00
3d-gussner
0139bb5a5e Update #MSG_CHANGE_SUCCESS c=20 2021-03-30 09:20:57 +02:00
3d-gussner
0e86ab88fd Update #MSG_FILAMENTCHANGE c=18 2021-03-30 09:20:01 +02:00
3d-gussner
9c0300df66 Update #MSG_HEATING c=20 2021-03-30 09:18:11 +02:00
3d-gussner
280a3c4d3a Update #MSG_PRUSA3D_HOWTO c=18 2021-03-30 09:16:14 +02:00
3d-gussner
12bd2f1a09 Update #MSG_PRUSA3D c=18 2021-03-30 09:15:21 +02:00
3d-gussner
4e4fb7a59f Update #MSG_PRUSA3D_FORUM c=18 2021-03-30 09:14:20 +02:00
3d-gussner
10c586b577 Update #MSG_FLOW c=15 2021-03-30 09:13:09 +02:00
3d-gussner
db07d55c29 Define #MSG_MMU_FIX_ISSUE c=20 r=4 2021-03-30 09:11:19 +02:00
3d-gussner
7c9891d85e Update #MSG_FSENSOR c=12 2021-03-30 09:09:11 +02:00
3d-gussner
7a99f63ffd Define #MSG_FAIL_STATS c=18 2021-03-30 09:06:59 +02:00
3d-gussner
d427563e2b Define #MSG_MMU_FAIL_STATS c=18 2021-03-30 09:05:18 +02:00
3d-gussner
1b4241f031 Update #MSG_ERROR c=10 2021-03-30 09:03:38 +02:00
3d-gussner
1b8ca77b0c Define #MSG_MMU_CUTTING_FIL c=18 2021-03-30 09:01:58 +02:00
3d-gussner
b6031c02a8 Update #MSG_DISABLE_STEPPERS c=18 2021-03-30 08:59:27 +02:00
3d-gussner
69b9acdfc1 Define #MSG_CRASH_RESUME c=20 r=3 2021-03-30 08:57:42 +02:00
3d-gussner
411caddc55 Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7 2021-03-30 08:14:46 +02:00
3d-gussner
2d2dc23e81 Define #MSG_CALIBRATING_HOME c=20 2021-03-30 08:12:20 +02:00
3d-gussner
c8af50d344 Define #MSG_COPY_SEL_LANG c=20 r=3 2021-03-30 08:09:08 +02:00
3d-gussner
71638b49fc Update #MSG_COOLDOWN c=18 2021-03-30 08:05:54 +02:00
3d-gussner
5f9b66a23a Update #MSG_NOT_COLOR c=19 2021-03-30 08:04:39 +02:00
3d-gussner
02ff05639b Define MSG_CHECKING_FILE c=17 2021-03-30 08:01:26 +02:00
3d-gussner
f2298b1a46 Update #MSG_SD_REMOVED c=20 2021-03-30 07:57:42 +02:00
3d-gussner
1e2f5c8323 Update #MSG_MENU_CALIBRATION c=18 2021-03-30 07:55:19 +02:00
3d-gussner
3733c42d38 Update #MSG_HOMEYZ_DONE c=20 2021-03-30 07:54:11 +02:00
3d-gussner
79aa6b198d Update #MSG_HOMEYZ c=18 2021-03-30 07:52:24 +02:00
3d-gussner
fa0382fd3e Update #MSG_CALIBRATE_BED c=18 2021-03-30 07:50:54 +02:00
3d-gussner
2985c6bd6b Update #MSG_BED c=13 2021-03-30 07:49:37 +02:00
3d-gussner
7c906dd0b1 Update #MSG_BED_CORRECTION_MENU c=18 2021-03-30 07:44:16 +02:00
3d-gussner
4d464b79f4 Update MSG_BED_HEATING c=20 2021-03-20 17:30:44 +01:00
3d-gussner
3ee23af7b7 Update MSG_BED_DONE c=20 2021-03-20 16:04:52 +01:00
3d-gussner
ba0f2b2501 Update MSG_LOOSE_PULLEY c=20 2021-03-20 07:11:41 +01:00
3d-gussner
3fcc81ebdb Update MSG_SELFTEST_ENDSTOP c=16 2021-03-20 07:11:07 +01:00
3d-gussner
17df4e1c8d Update MSG_SELFTEST_ENDSTOPS c=20 2021-03-20 07:10:09 +01:00
3d-gussner
4a6c53daf8 Update MSG_SELFTEST_PLEASECHECK c=20 2021-03-20 07:09:33 +01:00
3d-gussner
b3d3feef4d Update MSG_SELFTEST_ERROR c=20 2021-03-20 07:08:48 +01:00
3d-gussner
5d167ce813 Update MSG_SELFTEST_NOTCONNECTED c=20 2021-03-20 07:08:20 +01:00
3d-gussner
625604d704 Update MSG_SELFTEST_HEATERTHERMISTOR c=20 2021-03-20 07:07:14 +01:00
3d-gussner
b86ad11b68 Update MSG_SELFTEST_BEDHEATER c=20 2021-03-20 07:06:37 +01:00
3d-gussner
b3b062e4ba Update MSG_SELFTEST_SWAPPED c=16 2021-03-20 07:05:47 +01:00
3d-gussner
b6684f6114 Update MSG_SELFTEST_AXIS c=16 2021-03-20 07:05:03 +01:00
3d-gussner
bc9f6b6ae6 Update MSG_SELFTEST_AXIS_LENGTH c=20 2021-03-20 07:03:47 +01:00
3d-gussner
83cbfda113 Update MSG_AUTO_HOME c=18 2021-03-20 07:02:43 +01:00
3d-gussner
fe1b4e50be Update MSG_AMBIENT c=14 2021-03-20 06:59:54 +01:00
3d-gussner
178fe36dc7 Create MSG_CANCEL c=9 
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
 2021-03-20 06:30:26 +01:00
3d-gussner
1c965cd988 Update MSG_MEASURED_OFFSET c=20 2021-03-20 06:18:41 +01:00
3d-gussner
92acac453f Update MSG_MMU_POWER_FAILS c=15 2021-03-20 06:16:11 +01:00
3d-gussner
2a848923ea Update MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6 
as Dutch translation is longer
 2021-03-19 18:50:29 +01:00
3d-gussner
baabc0bd1e Fix typo "didnt" to "didn't" 2021-03-19 18:49:13 +01:00
3d-gussner
b806c017cb Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6 
as Polish translation is longer
 2021-03-19 18:47:58 +01:00
3d-gussner
542ff58529 Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6 
as Polish translation is longer
 2021-03-19 18:47:09 +01:00
3d-gussner
147fddd060 Update MSG_CALIBRATE_BED_RESET c=18 2021-03-19 18:41:01 +01:00
3d-gussner
6300211268 Update MSG_PLACE_STEEL_SHEET c=20 r=5 
as Italian translation is longer
 2021-03-19 18:37:23 +01:00
3d-gussner
79a148bb14 Update #MSG_DEFAULT_SETTINGS_LOADED c=20 r=6 
as Italian translation is longer
 2021-03-19 18:34:39 +01:00
3d-gussner
9e60953d44 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." 
as French translation is longer
 2021-03-19 18:14:03 +01:00
3d-gussner
a09f2c2f2d Update "G-code sliced for a newer firmware. Continue?" 
as French translation is longer
 2021-03-19 18:12:16 +01:00
3d-gussner
41022d7d60 Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." 
as French translation is longer
 2021-03-19 18:07:04 +01:00
3d-gussner
813aabab56 Update "Select nozzle preheat temperature which matches your material." c=20 r=6 
as Spanish translation is longer
 2021-03-19 18:03:06 +01:00
3d-gussner
d52a7326be Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6 
as German translation is longer
 2021-03-19 17:55:03 +01:00
3d-gussner
cc29a9485e Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c=20 r=9 
as German translation is longer
 2021-03-19 17:52:54 +01:00
3d-gussner
03a13ace5a Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9 
as French translation is longer
 2021-03-19 17:47:35 +01:00
3d-gussner
17c015f5c0 Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5 2021-03-19 17:44:07 +01:00
3d-gussner
ba9e26f444 Update #MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8 2021-03-19 17:37:24 +01:00
3d-gussner
1bba2255c1 Update MSG_WAITING_TEMP c=20 r=4 2021-03-19 17:34:15 +01:00
3d-gussner
bab4994b89 Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=2 2021-03-19 16:52:24 +01:00
3d-gussner
6a54196862 Update "Now remove the test print from steel sheet." c=20 r=4 2021-03-19 16:42:21 +01:00
3d-gussner
8cbf0b3318 Update "Crash detected. Resume print?" c=20 r=2 2021-03-19 16:38:53 +01:00
3d-gussner
891861d475 Update "G-code sliced for a different level. Continue?" c= r= values 2021-03-19 16:35:53 +01:00
3d-gussner
f9a92e2277 Update "Y distance from min" c=20 2021-03-19 16:32:13 +01:00
3d-gussner
1f6834204f Update "Select filament:" c= value 2021-03-19 16:30:04 +01:00
3d-gussner
cbe2a4d301 Update MSG_CHECK_IDLER c=20 r=5 2021-03-19 16:22:05 +01:00
3d-gussner
4dc99d970d Update "MMU needs user attention." c= r= values 2021-03-19 16:17:26 +01:00
3d-gussner
0928c3d133 Update "Lin. correction" c=18 2021-03-19 16:14:16 +01:00
3d-gussner
ce42f2c2a5 Update MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4 2021-03-19 16:11:42 +01:00
3d-gussner
5f9d6a0401 Update "Fail stats" c=18 2021-03-19 16:08:57 +01:00
3d-gussner
878200ecae Update "Fail stats MMU" c=18 2021-03-19 16:06:54 +01:00
3d-gussner
5cbb5b0e17 Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values 2021-03-19 15:53:36 +01:00
3d-gussner
c39b22724d Update "G-code sliced for a different level. Please re-slice the model again. Print cancelled." c= r= values 2021-03-19 15:51:10 +01:00
3d-gussner
5a36b49cee Update "Select temperature which matches your material." c= r= values 2021-03-19 15:45:32 +01:00
3d-gussner
41db8eed30 Update "Select nozzle preheat temperature which matches your material." c= r= values 2021-03-19 15:42:17 +01:00
3d-gussner
f319dede23 Update "Please insert filament into the first tube of the MMU, then press the knob to load it." c= r= values 2021-03-19 15:39:57 +01:00
3d-gussner
286c1931a5 Update #MSG_WIZARD_LOAD_FILAMENT c=20 r=5 2021-03-19 15:33:13 +01:00
3d-gussner
6a267e5a9a Update "Press the knob to resume nozzle temperature." c= r= values 2021-03-19 15:30:13 +01:00
3d-gussner
b001eaec8d Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c= r= values 2021-03-19 15:24:28 +01:00
3d-gussner
18a58c504d Update #MSG_BED_HEATING_SAFETY_DISABLED c=20 r=3 2021-03-19 15:21:42 +01:00
3d-gussner
ee8c9227cf Update #MSG_SELFTEST_FANS c=20 2021-03-19 15:16:23 +01:00
3d-gussner
ba73d14511 Update "Fix the issue and then press button on MMU unit." c= r= values 2021-03-19 15:13:56 +01:00
3d-gussner
0c18ddcb10 Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." c= r= values 2021-03-19 15:10:18 +01:00
3d-gussner
89900a5109 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." c= r= values 2021-03-19 15:07:14 +01:00
3d-gussner
49e8f84916 Update "G-code sliced for a newer firmware. Continue?" c= r= values 2021-03-19 15:02:53 +01:00
3d-gussner
fd7aa82dce Update MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6 2021-03-19 15:00:00 +01:00
3d-gussner
1ed7d8fc4b Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=5 2021-03-19 14:42:17 +01:00
3d-gussner
dbec06086c Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5 2021-03-19 14:40:04 +01:00
3d-gussner
37ec18596b Update #MSG_USERWAIT c= value 2021-03-19 14:29:15 +01:00
3d-gussner
dd4c02aa15 Update "Heating disabled by safety timer." c= r= values 2021-03-19 14:23:46 +01:00
3d-gussner
9a719fd0b9 Update "Calibrating home" c= value 2021-03-19 14:17:30 +01:00
DRracer
8ac1d5b95e
Attempt to workaround the M73 C0|D0 visual issue (#3067) 
Attempt to workaround the M73 C0|D0 visual issue

This is an attempt to enable alternation of time to print finish and time
to color change even in the last minute of time to color change, i.e. be
able to print "0:00C".

The proposed solution leverages the capability of the current FW to read
float values from the C|D parameter. This could have the raw benefit of
being able still to alternate this time on the LCD as "0:00C" (or
"<1min") if the slicer sends a non-zero but <1 time right before the
color change.

Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: 3d-gussner <3d.gussner@gmail.com>
 2021-03-19 10:18:28 +01:00
D.R.racer
f31189e5be Version changed (3.10.0-RC1 build 4078) 2021-03-17 12:30:54 +01:00
espr14
99206884b5 Calibration: detect biased PINDA and retry calibration 
PFW-1223
 2021-03-12 05:04:49 +01:00
3d-gussner
6355458052 Add def M120_M121_ENABLED to Configuration_adv.h 2021-03-11 15:00:49 +01:00
3d-gussner
832e881955 Disable M120 M121 2021-03-10 17:46:19 +01:00
espr14
eb4cf1a77f Calibration: return XY back after Z search 
PFW-1217
 2021-03-10 10:27:57 +01:00
awenelo
9b21ebd376 Fix numbering for custum sheet hex values 2021-03-07 12:14:03 -05:00
awenelo
09b3632d43 Final changes + cleanup 2021-03-07 09:44:33 -05:00
awenelo
144fc197a5 Fix index number 2021-03-06 14:20:06 -05:00
awenelo
c777199d34 Simplify sheet numbering 2021-03-06 13:26:28 -05:00
DRracer
6489c6f17f
Merge pull request #3036 from wavexx/remove_is_buffer_empty 
Remove duplicate function is_buffer_empty()
 2021-03-05 08:28:40 +01:00
awenelo
53a3772f09 Add satin sheet 2021-03-04 10:14:29 -05:00
Alex Voinea
f0eedf301d
optiboot: check boot_app_magic as well before early exit 2021-03-03 16:31:55 +02:00
Alex Voinea
c951bea627
Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
Alex Voinea
c95d2fcbd7
Use avr-libc wdt library 2021-03-03 16:31:06 +02:00
DRracer
073cbe0339
Merge pull request #3048 from DRracer/bootappflags-bad-addr 
Fix flashing languages with inline wdr instructions
 2021-03-03 13:46:08 +01:00
Alex Voinea
8ced0579d6
Move SerialHead declaration outside of loops 2021-03-03 14:35:37 +02:00
DRracer
c1849f5cc2
Merge pull request #2405 from leptun/MK3_NEW_SD_COMPILATION 
⚡️New SD menu
 2021-03-03 11:45:04 +01:00
Alex Voinea
026145b78b
Fix CFM message end pointer 2021-03-03 12:31:14 +02:00
D.R.racer
3922bf2877 Fix flashing languages with inline wdr instructions 
A fairly mysterious situation happened recently in the MK3 branch.
After merging #3033 (change watchdogReset() into a single inline wdr instruction)
we were unable to flash languages.

Since it looked similarly suspicious like issue #2954 we started investigating deeply.
The problem was in the code as described in the comment in this PR.
 2021-03-03 11:19:39 +01:00
3d-gussner
7fa93dfa1b Fix back from submenu Community made to Select language after factory reset 2021-03-01 09:18:47 +01:00
3d-gussner
fbcbba78a3 Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 2021-03-01 09:04:10 +01:00
DRracer
e9c3becb2c
Merge pull request #2572 from wavexx/fwretract_plan_sync 
Always sync before manipulating the planner position in FWRETRACT
 2021-03-01 08:26:57 +01:00
3d-gussner
6d7d9089f7 Add defines and templates for community languages 
Add `Community made` submenu to `Select language`
 2021-03-01 08:22:43 +01:00
3d-gussner
d0d4298249 Update EEPROM documentation for Service prep 2021-02-28 18:18:06 +01:00
3d-gussner
3e06a17810 Fix LCD output 2021-02-28 18:04:07 +01:00
Alex Voinea
28f21c8630
Fix bubblesort sorting speed. ShellSort is probably broken 2021-02-26 19:17:14 +02:00
Alex Voinea
6e0ecf5cd2
Remove redundant click sound in factory reset (MK3 merge issue) 2021-02-26 18:22:32 +02:00