| .. |
|
variants
|
_MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define)
|
2018-05-21 23:28:28 +02:00 |
|
adc.c
|
Removed debug messages from serial comunication (octoprint...).
|
2017-12-27 20:29:24 +01:00 |
|
adc.h
|
new module adc (analog2digital)
|
2017-12-20 13:42:20 +01:00 |
|
BlinkM.cpp
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
|
BlinkM.h
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
|
boards.h
|
MK3 configuration files, renamed EINY to EINSY
|
2018-02-01 17:10:41 +01:00 |
|
cardreader.cpp
|
correction in M27 message
|
2018-04-26 11:50:48 +02:00 |
|
cardreader.h
|
SD speed test (DEBUG)
|
2018-02-20 18:50:20 +01:00 |
|
cmdqueue.cpp
|
show message that printer is not connected to monitoring on printer start
|
2018-03-14 15:35:39 +01:00 |
|
cmdqueue.h
|
New localization - includes fixed
|
2018-05-09 16:55:41 +02:00 |
|
config.h
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
Configuration_adv.h
|
Removed unused files (ST7565R-dogm, digipot)
|
2018-03-29 23:01:13 +02:00 |
|
Configuration.h
|
version changed
|
2018-05-18 14:42:35 +02:00 |
|
ConfigurationStore.cpp
|
Merge remote-tracking branch 'upstream/MK25' into MK25
|
2018-03-06 15:11:50 +01:00 |
|
ConfigurationStore.h
|
Inform user that hardcoded default settings were loaded (EEPROM version change)
|
2018-01-30 11:31:44 +01:00 |
|
Dcodes.cpp
|
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
|
2018-04-03 12:30:35 +02:00 |
|
Dcodes.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
|
fastio.h
|
WRITE_NC macro for non-critical (non-synchronized) access to
|
2018-01-12 20:15:59 +01:00 |
|
Firmware.ino
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
Firmware.ino.rambo.hex
|
build 143e
|
2018-01-04 18:08:22 +01:00 |
|
fsensor.cpp
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
fsensor.h
|
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
|
2017-12-20 13:33:45 +01:00 |
|
langtool.php
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
langtool.pl
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_all.cpp
|
Merge branch 'MK3' into read_xyz_cal
|
2018-05-10 18:31:31 +02:00 |
|
language_all.h
|
Merge branch 'MK3' into read_xyz_cal
|
2018-05-10 18:31:31 +02:00 |
|
language_common.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_cz.h
|
Show full screen blocking notification message after heater turning off by safety timer.
|
2018-04-27 16:23:20 +02:00 |
|
language_de.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_en.h
|
Merge branch 'MK3' into read_xyz_cal
|
2018-05-10 18:31:31 +02:00 |
|
language_es.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_it.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_pl.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
le.sh
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
LiquidCrystal_Prusa.cpp
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
LiquidCrystal_Prusa.h
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
Marlin_main.cpp
|
Merge branch 'MK3' into read_xyz_cal
|
2018-05-10 18:31:31 +02:00 |
|
Marlin.h
|
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
|
2018-04-26 16:36:02 +02:00 |
|
MarlinSerial.cpp
|
Optimized the MarlinSerial class by declaring all methods static.
|
2018-02-02 20:25:19 +01:00 |
|
MarlinSerial.h
|
Optimized the MarlinSerial class by declaring all methods static.
|
2018-02-02 20:25:19 +01:00 |
|
MenuStack.cpp
|
fixed possible feedmultiply change cause by entering main menu with negative encoder position
|
2018-04-13 10:27:55 +02:00 |
|
MenuStack.h
|
fixed possible feedmultiply change cause by entering main menu with negative encoder position
|
2018-04-13 10:27:55 +02:00 |
|
mesh_bed_calibration.cpp
|
Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang
|
2018-05-20 13:24:52 +02:00 |
|
mesh_bed_calibration.h
|
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
|
2018-05-10 18:24:49 +02:00 |
|
mesh_bed_leveling.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
mesh_bed_leveling.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
pat9125.cpp
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
pat9125.h
|
Optimization of the filament sensor.
|
2018-01-23 16:47:42 +01:00 |
|
pins_Einsy_1_0.h
|
use defines for adc pins, temp table for PIDNA update
|
2018-03-16 11:01:06 +01:00 |
|
pins_Rambo_1_0.h
|
Rambo 1.0 support (MK25, MK2)
|
2018-04-27 17:04:55 +02:00 |
|
pins_Rambo_1_3.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
pins.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
planner.cpp
|
Merge remote-tracking branch 'upstream/MK25' into MK25
|
2018-03-06 15:11:50 +01:00 |
|
planner.h
|
Merge remote-tracking branch 'remotes/origin/M221_fix' into MK3_fast_dbg
|
2018-03-05 19:13:07 +01:00 |
|
printers.h
|
whitespace
|
2018-02-22 00:11:17 +01:00 |
|
qr_solve.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
qr_solve.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Sd2Card.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2Card.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2PinMap.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdBaseFile.cpp
|
first working version
|
2017-11-27 06:20:51 +01:00 |
|
SdBaseFile.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFatConfig.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatStructs.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatUtil.cpp
|
3.0.10 sync
|
2017-03-24 19:47:50 +01:00 |
|
SdFatUtil.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdInfo.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
sm4.c
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
sm4.h
|
New XYZ calibration with image processing
|
2018-03-13 12:55:35 +01:00 |
|
speed_lookuptable.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
spi.c
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
spi.h
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
stepper.cpp
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
stepper.h
|
Removed unused files (ST7565R-dogm, digipot)
|
2018-03-29 23:01:13 +02:00 |
|
swi2c.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swi2c.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
temperature.cpp
|
fan error synchronization with planner
|
2018-05-02 16:16:48 +02:00 |
|
temperature.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
|
thermistortables.h
|
new ambient thermistor table
|
2017-12-12 22:49:47 +01:00 |
|
Timer.cpp
|
Return from Autoload filament and Load filament menu item to parent menu.
|
2018-04-25 16:51:35 +02:00 |
|
Timer.h
|
Safety timer (disable heaters after 15min idle)
|
2018-03-12 23:45:10 +01:00 |
|
tmc2130.cpp
|
New localization - macro declarations fixed
|
2018-05-20 13:15:46 +02:00 |
|
tmc2130.h
|
Z-axis stealth mode
|
2018-04-03 18:26:39 +02:00 |
|
ultralcd_implementation_hitachi_HD44780.h
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
ultralcd.cpp
|
wizard fix: don't reset calibration status when repeating first layer cal.
|
2018-05-15 23:19:23 +02:00 |
|
ultralcd.h
|
Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.
|
2018-04-26 16:36:02 +02:00 |
|
uni_avr_rpi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
util.cpp
|
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
|
2018-04-18 14:17:28 +02:00 |
|
util.h
|
force selftest if user upgraded from 3.1.2-RC1 or older fw version
|
2018-02-27 17:52:13 +01:00 |
|
vector_3.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
vector_3.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
xyzcal.cpp
|
New localization - macro declarations fixed
|
2018-05-20 13:15:46 +02:00 |
|
xyzcal.h
|
XYZ calibration - accuracy improvement
|
2018-03-27 17:27:41 +02:00 |
