| .. |
|
variants
|
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
|
2018-05-08 21:54:11 +02:00 |
|
adc.c
|
Removed debug messages from serial comunication (octoprint...).
|
2017-12-27 20:29:24 +01:00 |
|
adc.h
|
new module adc (analog2digital)
|
2017-12-20 13:42:20 +01:00 |
|
BlinkM.cpp
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
|
BlinkM.h
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
|
boards.h
|
MK3 configuration files, renamed EINY to EINSY
|
2018-02-01 17:10:41 +01:00 |
|
cardreader.cpp
|
correction in M27 message
|
2018-04-26 11:50:48 +02:00 |
|
cardreader.h
|
SD speed test (DEBUG)
|
2018-02-20 18:50:20 +01:00 |
|
cmdqueue.cpp
|
show message that printer is not connected to monitoring on printer start
|
2018-03-14 15:35:39 +01:00 |
|
cmdqueue.h
|
Minimize risk of stepper routine interrupt blocking by reorganizing
|
2018-01-20 14:37:22 +01:00 |
|
config.h
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
Configuration.h
|
version change
|
2018-04-27 19:59:22 +02:00 |
|
Configuration_adv.h
|
Removed unused files (ST7565R-dogm, digipot)
|
2018-03-29 23:01:13 +02:00 |
|
ConfigurationStore.cpp
|
Merge remote-tracking branch 'upstream/MK25' into MK25
|
2018-03-06 15:11:50 +01:00 |
|
ConfigurationStore.h
|
Inform user that hardcoded default settings were loaded (EEPROM version change)
|
2018-01-30 11:31:44 +01:00 |
|
Dcodes.cpp
|
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
|
2018-04-03 12:30:35 +02:00 |
|
Dcodes.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
|
fastio.h
|
WRITE_NC macro for non-critical (non-synchronized) access to
|
2018-01-12 20:15:59 +01:00 |
|
Firmware.ino
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
Firmware.ino.rambo.hex
|
build 143e
|
2018-01-04 18:08:22 +01:00 |
|
fsensor.cpp
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
fsensor.h
|
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
|
2017-12-20 13:33:45 +01:00 |
|
langtool.php
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
langtool.pl
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_all.cpp
|
Show full screen blocking notification message after heater turning off by safety timer.
|
2018-04-27 16:23:20 +02:00 |
|
language_all.h
|
Show full screen blocking notification message after heater turning off by safety timer.
|
2018-04-27 16:23:20 +02:00 |
|
language_common.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_cz.h
|
Show full screen blocking notification message after heater turning off by safety timer.
|
2018-04-27 16:23:20 +02:00 |
|
language_de.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_en.h
|
Show full screen blocking notification message after heater turning off by safety timer.
|
2018-04-27 16:23:20 +02:00 |
|
language_es.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_it.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
language_pl.h
|
M115 update
|
2018-04-25 20:39:10 +02:00 |
|
le.sh
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
LiquidCrystal_Prusa.cpp
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
LiquidCrystal_Prusa.h
|
LiquidCrystal class renamed to LiquidCrystal_Prusa
|
2018-03-29 17:50:43 +02:00 |
|
Marlin.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
Marlin_main.cpp
|
Do not disable bed heating, when the print is paused.
|
2018-05-04 15:21:22 +02:00 |
|
MarlinSerial.cpp
|
Optimized the MarlinSerial class by declaring all methods static.
|
2018-02-02 20:25:19 +01:00 |
|
MarlinSerial.h
|
Optimized the MarlinSerial class by declaring all methods static.
|
2018-02-02 20:25:19 +01:00 |
|
MenuStack.cpp
|
fixed possible feedmultiply change cause by entering main menu with negative encoder position
|
2018-04-13 10:27:55 +02:00 |
|
MenuStack.h
|
fixed possible feedmultiply change cause by entering main menu with negative encoder position
|
2018-04-13 10:27:55 +02:00 |
|
mesh_bed_calibration.cpp
|
Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested.
|
2018-05-08 21:54:11 +02:00 |
|
mesh_bed_calibration.h
|
Update documentation of mesh_bed_calibration.cpp.
|
2018-04-25 12:21:20 +02:00 |
|
mesh_bed_leveling.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
mesh_bed_leveling.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
pat9125.cpp
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
pat9125.h
|
Optimization of the filament sensor.
|
2018-01-23 16:47:42 +01:00 |
|
pins.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
pins_Einsy_1_0.h
|
use defines for adc pins, temp table for PIDNA update
|
2018-03-16 11:01:06 +01:00 |
|
pins_Rambo_1_0.h
|
Rambo 1.0 support (MK25, MK2)
|
2018-04-27 17:04:55 +02:00 |
|
pins_Rambo_1_3.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
planner.cpp
|
Merge remote-tracking branch 'upstream/MK25' into MK25
|
2018-03-06 15:11:50 +01:00 |
|
planner.h
|
Merge remote-tracking branch 'remotes/origin/M221_fix' into MK3_fast_dbg
|
2018-03-05 19:13:07 +01:00 |
|
printers.h
|
whitespace
|
2018-02-22 00:11:17 +01:00 |
|
qr_solve.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
qr_solve.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Sd2Card.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2Card.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2PinMap.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdBaseFile.cpp
|
first working version
|
2017-11-27 06:20:51 +01:00 |
|
SdBaseFile.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFatConfig.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatStructs.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatUtil.cpp
|
3.0.10 sync
|
2017-03-24 19:47:50 +01:00 |
|
SdFatUtil.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdInfo.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
sm4.c
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
sm4.h
|
New XYZ calibration with image processing
|
2018-03-13 12:55:35 +01:00 |
|
speed_lookuptable.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
spi.c
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
spi.h
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
stepper.cpp
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
|
stepper.h
|
Removed unused files (ST7565R-dogm, digipot)
|
2018-03-29 23:01:13 +02:00 |
|
swi2c.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swi2c.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
temperature.cpp
|
fan error synchronization with planner
|
2018-05-02 16:16:48 +02:00 |
|
temperature.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
|
thermistortables.h
|
new ambient thermistor table
|
2017-12-12 22:49:47 +01:00 |
|
Timer.cpp
|
Return from Autoload filament and Load filament menu item to parent menu.
|
2018-04-25 16:51:35 +02:00 |
|
Timer.h
|
Safety timer (disable heaters after 15min idle)
|
2018-03-12 23:45:10 +01:00 |
|
tmc2130.cpp
|
Z-axis stealth mode
|
2018-04-03 18:26:39 +02:00 |
|
tmc2130.h
|
Z-axis stealth mode
|
2018-04-03 18:26:39 +02:00 |
|
ultralcd.cpp
|
Set calibration status to calibrated also by using live adjust Z.
|
2018-05-03 22:03:38 +02:00 |
|
ultralcd.h
|
Merge branch 'MK3' into MK3
|
2018-04-25 19:15:36 +00:00 |
|
ultralcd_implementation_hitachi_HD44780.h
|
FSensor PAT9125 - i2c ACK check + two attempts in init function (PFW).
|
2018-04-11 16:03:54 +02:00 |
|
uni_avr_rpi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
util.cpp
|
EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers
|
2018-04-18 14:17:28 +02:00 |
|
util.h
|
force selftest if user upgraded from 3.1.2-RC1 or older fw version
|
2018-02-27 17:52:13 +01:00 |
|
vector_3.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
vector_3.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
xyzcal.cpp
|
XYZcal - findpointcenter starting Z coordinate down by 50um
|
2018-04-26 18:41:56 +02:00 |
|
xyzcal.h
|
XYZ calibration - accuracy improvement
|
2018-03-27 17:27:41 +02:00 |
