PrusaSlicer-NonPlainar/lib/Slic3r/Layer/Region.pm

package Slic3r::Layer::Region;
use Moo;

use List::Util qw(sum first);
use Slic3r::ExtrusionPath ':roles';
use Slic3r::Geometry qw(PI A B scale unscale chained_path points_coincide);
use Slic3r::Geometry::Clipper qw(union_ex diff_ex intersection_ex 
    offset offset2 offset2_ex union_pt traverse_pt diff intersection
    union diff intersection_pl);
use Slic3r::Surface ':types';

has 'layer' => (
    is          => 'ro',
    weak_ref    => 1,
    required    => 1,
    trigger     => 1,
    handles     => [qw(id slice_z print_z height flow config)],
);
has 'region'            => (is => 'ro', required => 1, handles => [qw(extruders)]);
has 'perimeter_flow'    => (is => 'rw');
has 'infill_flow'       => (is => 'rw');
has 'solid_infill_flow' => (is => 'rw');
has 'top_infill_flow'   => (is => 'rw');
has 'infill_area_threshold' => (is => 'lazy');
has 'overhang_width'    => (is => 'lazy');

# collection of surfaces generated by slicing the original geometry
# divided by type top/bottom/internal
has 'slices' => (is => 'rw', default => sub { Slic3r::Surface::Collection->new });

# collection of extrusion paths/loops filling gaps
has 'thin_fills' => (is => 'rw', default => sub { Slic3r::ExtrusionPath::Collection->new });

# collection of surfaces for infill generation
has 'fill_surfaces' => (is => 'rw', default => sub { Slic3r::Surface::Collection->new });

# ordered collection of extrusion paths/loops to build all perimeters
has 'perimeters' => (is => 'rw', default => sub { Slic3r::ExtrusionPath::Collection->new });

# ordered collection of extrusion paths to fill surfaces
has 'fills' => (is => 'rw', default => sub { Slic3r::ExtrusionPath::Collection->new });

sub BUILD {
    my $self = shift;
    $self->_update_flows;
}

sub _trigger_layer {
    my $self = shift;
    $self->_update_flows;
}

sub _update_flows {
    my $self = shift;
    return if !$self->region;
    
    if ($self->id == 0) {
        for (qw(perimeter infill solid_infill top_infill)) {
            my $method = "${_}_flow";
            $self->$method
                ($self->region->first_layer_flows->{$_} || $self->region->flows->{$_});
        } 
    } else {
        $self->perimeter_flow($self->region->flows->{perimeter});
        $self->infill_flow($self->region->flows->{infill});
        $self->solid_infill_flow($self->region->flows->{solid_infill});
        $self->top_infill_flow($self->region->flows->{top_infill});
    }
}

sub _build_overhang_width {
    my $self = shift;
    my $threshold_rad = PI/2 - atan2($self->perimeter_flow->width / $self->height / 2, 1);
    return scale($self->height * ((cos $threshold_rad) / (sin $threshold_rad)));
}

sub _build_infill_area_threshold {
    my $self = shift;
    return $self->solid_infill_flow->scaled_spacing ** 2;
}

# build polylines from lines
sub make_surfaces {
    my $self = shift;
    my ($loops) = @_;
    
    return if !@$loops;
    $self->slices->clear;
    $self->slices->append($self->_merge_loops($loops));
    
    if (0) {
        require "Slic3r/SVG.pm";
        Slic3r::SVG::output("surfaces.svg",
            #polylines         => $loops,
            red_polylines       => [ grep $_->is_counter_clockwise, @$loops ],
            green_polylines     => [ grep !$_->is_counter_clockwise, @$loops ],
            expolygons          => [ map $_->expolygon, @{$self->slices} ],
        );
    }
}

sub _merge_loops {
    my ($self, $loops, $safety_offset) = @_;
    
    # Input loops are not suitable for evenodd nor nonzero fill types, as we might get
    # two consecutive concentric loops having the same winding order - and we have to 
    # respect such order. In that case, evenodd would create wrong inversions, and nonzero
    # would ignore holes inside two concentric contours.
    # So we're ordering loops and collapse consecutive concentric loops having the same 
    # winding order.
    # TODO: find a faster algorithm for this, maybe with some sort of binary search.
    # If we computed a "nesting tree" we could also just remove the consecutive loops
    # having the same winding order, and remove the extra one(s) so that we could just
    # supply everything to offset_ex() instead of performing several union/diff calls.
    
    # we sort by area assuming that the outermost loops have larger area;
    # the previous sorting method, based on $b->contains_point($a->[0]), failed to nest
    # loops correctly in some edge cases when original model had overlapping facets
    my @abs_area = map abs($_), my @area = map $_->area, @$loops;
    my @sorted = sort { $abs_area[$b] <=> $abs_area[$a] } 0..$#$loops;  # outer first
    
    # we don't perform a safety offset now because it might reverse cw loops
    my $slices = [];
    for my $i (@sorted) {
        # we rely on the already computed area to determine the winding order
        # of the loops, since the Orientation() function provided by Clipper
        # would do the same, thus repeating the calculation
        $slices = ($area[$i] >= 0)
            ? [ $loops->[$i], @$slices ]
            : diff($slices, [$loops->[$i]]);
    }
    
    # perform a safety offset to merge very close facets (TODO: find test case for this)
    $safety_offset //= scale 0.0499;
    $slices = offset2_ex($slices, +$safety_offset, -$safety_offset);
    
    Slic3r::debugf "Layer %d (slice_z = %.2f, print_z = %.2f): %d surface(s) having %d holes detected from %d polylines\n",
        $self->id, $self->slice_z, $self->print_z,
        scalar(@$slices), scalar(map @{$_->holes}, @$slices), scalar(@$loops)
        if $Slic3r::debug;
    
    return map Slic3r::Surface->new(expolygon => $_, surface_type => S_TYPE_INTERNAL), @$slices;
}

sub make_perimeters {
    my $self = shift;
    
    my $pwidth              = $self->perimeter_flow->scaled_width;
    my $pspacing            = $self->perimeter_flow->scaled_spacing;
    my $ispacing            = $self->solid_infill_flow->scaled_spacing;
    my $gap_area_threshold  = $self->perimeter_flow->scaled_width ** 2;
    
    $self->perimeters->clear;
    $self->fill_surfaces->clear;
    $self->thin_fills->clear;
    
    my @contours    = ();    # array of Polygons with ccw orientation
    my @holes       = ();    # array of Polygons with cw orientation
    my @thin_walls  = ();    # array of ExPolygons
    my @gaps        = ();    # array of ExPolygons
    
    # we need to process each island separately because we might have different
    # extra perimeters for each one
    foreach my $surface (@{$self->slices}) {
        # detect how many perimeters must be generated for this island
        my $loop_number = $self->config->perimeters + ($surface->extra_perimeters || 0);
        
        my @last = @{$surface->expolygon};
        my @last_gaps = ();
        for my $i (1 .. $loop_number) {  # outer loop is 1
            my @offsets = ();
            if ($i == 1) {
                # the minimum thickness of a single loop is:
                # width/2 + spacing/2 + spacing/2 + width/2
                @offsets = @{offset2(\@last, -(0.5*$pwidth + 0.5*$pspacing - 1), +(0.5*$pspacing - 1))};
                
                # look for thin walls
                if ($self->config->thin_walls) {
                    my $diff = diff_ex(
                        \@last,
                        offset(\@offsets, +0.5*$pwidth),
                    );
                    push @thin_walls, grep abs($_->area) >= $gap_area_threshold, @$diff;
                }
            } else {
                @offsets = @{offset2(\@last, -(1.5*$pspacing - 1), +(0.5*$pspacing - 1))};
                
                # look for gaps
                if ($Slic3r::Config->gap_fill_speed > 0 && $self->config->fill_density > 0) {
                    my $diff = diff_ex(
                        offset(\@last, -0.5*$pspacing),
                        offset(\@offsets, +0.5*$pspacing),
                    );
                    push @gaps, @last_gaps = grep abs($_->area) >= $gap_area_threshold, @$diff;
                }
            }
            
            last if !@offsets;
            # clone polygons because these ExPolygons will go out of scope very soon
            @last = @offsets;
            foreach my $polygon (@offsets) {
                if ($polygon->is_counter_clockwise) {
                    push @contours, $polygon;
                } else {
                    push @holes, $polygon;
                }
            }
        }
        
        # make sure we don't infill narrow parts that are already gap-filled
        # (we only consider this surface's gaps to reduce the diff() complexity)
        @last = @{diff(\@last, \@last_gaps)};
        
        # create one more offset to be used as boundary for fill
        # we offset by half the perimeter spacing (to get to the actual infill boundary)
        # and then we offset back and forth by half the infill spacing to only consider the
        # non-collapsing regions
        $self->fill_surfaces->append(
            @{offset2_ex(
                [ map @{$_->simplify_p(&Slic3r::SCALED_RESOLUTION)}, @{union_ex(\@last)} ],
                -($pspacing/2 + $ispacing/2),
                +$ispacing/2,
            )}
        );
    }
    
    # find nesting hierarchies separately for contours and holes
    my $contours_pt = union_pt(\@contours);
    my $holes_pt    = union_pt(\@holes);
    
    # prepare a coderef for traversing the PolyTree object
    # external contours are root items of $contours_pt
    # internal contours are the ones next to external
    my $traverse;
    $traverse = sub {
        my ($polynodes, $depth, $is_contour) = @_;
        
        # use a nearest neighbor search to order these children
        # TODO: supply second argument to chained_path() too?
        my @ordering_points = map { ($_->{outer} // $_->{hole})->first_point } @$polynodes;
        my @nodes = @$polynodes[@{chained_path(\@ordering_points)}];
        
        my @loops = ();
        foreach my $polynode (@nodes) {
            push @loops, $traverse->($polynode->{children}, $depth+1, $is_contour);
            
            # return ccw contours and cw holes
            # GCode.pm will convert all of them to ccw, but it needs to know
            # what the holes are in order to compute the correct inwards move
            
            my $polygon = ($polynode->{outer} // $polynode->{hole})->clone;
            $polygon->reverse if defined $polynode->{hole};
            $polygon->reverse if !$is_contour;
            
            my $role = EXTR_ROLE_PERIMETER;
            if ($is_contour ? $depth == 0 : !@{ $polynode->{children} }) {
                # external perimeters are root level in case of contours
                # and items with no children in case of holes
                $role = EXTR_ROLE_EXTERNAL_PERIMETER;
            } elsif ($depth == 1 && $is_contour) {
                $role = EXTR_ROLE_CONTOUR_INTERNAL_PERIMETER;
            }
            
            push @loops, Slic3r::ExtrusionLoop->new(
                polygon         => $polygon,
                role            => $role,
                flow_spacing    => $self->perimeter_flow->spacing,
            );
        }
        return @loops;
    };
    
    # order loops from inner to outer (in terms of object slices)
    my @loops = (
        (reverse $traverse->($holes_pt, 0)),
        $traverse->($contours_pt, 0, 1),
    );
    
    # if brim will be printed, reverse the order of perimeters so that
    # we continue inwards after having finished the brim
    # TODO: add test for perimeter order
    @loops = reverse @loops
        if $Slic3r::Config->external_perimeters_first
            || ($self->layer->id == 0 && $Slic3r::Config->brim_width > 0);
    
    # append perimeters
    $self->perimeters->append(@loops);
    
    # detect thin walls by offsetting slices by half extrusion inwards
    # and add them as perimeters
    if (@thin_walls) {
        my @p = map $_->medial_axis($pspacing), @thin_walls;
        my @paths = ();
        for my $p (@p) {
            next if $p->length <= $pspacing * 2;
            my %params = (
                role            => EXTR_ROLE_EXTERNAL_PERIMETER,
                flow_spacing    => $self->perimeter_flow->spacing,
            );
            push @paths, $p->isa('Slic3r::Polygon')
                ? Slic3r::ExtrusionLoop->new(polygon  => $p, %params)
                : Slic3r::ExtrusionPath->new(polyline => $p, %params);
        }
        
        $self->perimeters->append(
            map $_->clone, @{Slic3r::ExtrusionPath::Collection->new(@paths)->chained_path(0)}
        );
        Slic3r::debugf "  %d thin walls detected\n", scalar(@paths) if $Slic3r::debug;
    }
    
    $self->_fill_gaps(\@gaps);
}

sub _fill_gaps {
    my $self = shift;
    my ($gaps) = @_;
    
    return unless @$gaps;
    
    my $filler = $self->layer->object->fill_maker->filler('rectilinear');
    $filler->layer_id($self->layer->id);
    
    # we should probably use this code to handle thin walls and remove that logic from
    # make_surfaces(), but we need to enable dynamic extrusion width before as we can't
    # use zigzag for thin walls.
    
    # medial axis-based gap fill should benefit from detection of larger gaps too, so 
    # we could try with 1.5*$w for example, but that doesn't work well for zigzag fill
    # because it tends to create very sparse points along the gap when the infill direction
    # is not parallel to the gap (1.5*$w thus may only work well with a straight line)
    my $w = $self->perimeter_flow->width;
    my @widths = ($w, 0.4 * $w);  # worth trying 0.2 too?
    foreach my $width (@widths) {
        my $flow = $self->perimeter_flow->clone(width => $width);
        
        # extract the gaps having this width
        my @this_width = map @{$_->offset_ex(+0.5*$flow->scaled_width)},
            map @{$_->noncollapsing_offset_ex(-0.5*$flow->scaled_width)},
            @$gaps;
        
        if (0) {  # remember to re-enable t/dynamic.t
            # fill gaps using dynamic extrusion width, by treating them like thin polygons,
            # thus generating the skeleton and using it to fill them
            my %path_args = (
                role            => EXTR_ROLE_SOLIDFILL,
                flow_spacing    => $flow->spacing,
            );
            $self->thin_fills->append(map {
                $_->isa('Slic3r::Polygon')
                    ? Slic3r::ExtrusionLoop->new(polygon => $_, %path_args)->split_at_first_point  # we should keep these as loops
                    : Slic3r::ExtrusionPath->new(polyline => $_, %path_args),
            } map $_->medial_axis($flow->scaled_width), @this_width);
        
            Slic3r::debugf "  %d gaps filled with extrusion width = %s\n", scalar @this_width, $width
                if @{ $self->thin_fills };
            
        } else {
            # fill gaps using zigzag infill
            
            # since this is infill, we have to offset by half-extrusion width inwards
            my @infill = map @{$_->offset_ex(-0.5*$flow->scaled_width)}, @this_width;
            
            foreach my $expolygon (@infill) {
                my ($params, @paths) = $filler->fill_surface(
                    Slic3r::Surface->new(expolygon => $expolygon, surface_type => S_TYPE_INTERNALSOLID),
                    density         => 1,
                    flow_spacing    => $flow->spacing,
                );
                
                # Split polylines into lines so that the chained_path() search
                # at the final stage has more freedom and will choose starting
                # points closer than last positions. OTOH, this will make such
                # search slower. Probably, ExtrusionPath objects should support
                # splitting nearby a given position so that we can choose the right
                # entry point even in the middle of the path without needing a 
                # complex, slow, chained_path() search on all segments. TODO.
                # Such logic will also avoid all the small travel moves that this 
                # line-splitting causes, and it will be applicable to other things
                # too.
                my @lines = map @{Slic3r::Polyline->new(@$_)->lines}, @paths;
                
                @paths = map Slic3r::ExtrusionPath->new(
                    polyline        => Slic3r::Polyline->new(@$_),
                    role            => EXTR_ROLE_GAPFILL,
                    height          => $self->height,
                    flow_spacing    => $params->{flow_spacing},
                ), @lines;
                $_->simplify($flow->scaled_width/3) for @paths;
                
                $self->thin_fills->append(@paths);
            }
        }
        
        # check what's left
        @$gaps = @{diff_ex(
            [ map @$_, @$gaps ],
            [ map @$_, @this_width ],
        )};
    }
}

sub prepare_fill_surfaces {
    my $self = shift;
    
    # if no solid layers are requested, turn top/bottom surfaces to internal
    if ($self->config->top_solid_layers == 0) {
        $_->surface_type(S_TYPE_INTERNAL) for @{$self->fill_surfaces->filter_by_type(S_TYPE_TOP)};
    }
    if ($self->config->bottom_solid_layers == 0) {
        $_->surface_type(S_TYPE_INTERNAL) for @{$self->fill_surfaces->filter_by_type(S_TYPE_BOTTOM)};
    }
        
    # turn too small internal regions into solid regions according to the user setting
    if ($self->config->fill_density > 0) {
        my $min_area = scale scale $self->config->solid_infill_below_area; # scaling an area requires two calls!
        $_->surface_type(S_TYPE_INTERNALSOLID)
            for grep { $_->area <= $min_area } @{$self->fill_surfaces->filter_by_type(S_TYPE_INTERNAL)};
    }
}

sub process_external_surfaces {
    my ($self, $lower_layer) = @_;
    
    my @surfaces = @{$self->fill_surfaces};
    my $margin = scale &Slic3r::EXTERNAL_INFILL_MARGIN;
    
    my @bottom = ();
    foreach my $surface (grep $_->surface_type == S_TYPE_BOTTOM, @surfaces) {
        my $grown = $surface->expolygon->offset_ex(+$margin);
        
        # detect bridge direction before merging grown surfaces otherwise adjacent bridges
        # would get merged into a single one while they need different directions
        # also, supply the original expolygon instead of the grown one, because in case
        # of very thin (but still working) anchors, the grown expolygon would go beyond them
        my $angle = $lower_layer
            ? $self->_detect_bridge_direction($surface->expolygon, $lower_layer)
            : undef;
        
        push @bottom, map $surface->clone(expolygon => $_, bridge_angle => $angle), @$grown;
    }
    
    my @top = ();
    foreach my $surface (grep $_->surface_type == S_TYPE_TOP, @surfaces) {
        # give priority to bottom surfaces
        my $grown = diff_ex(
            $surface->expolygon->offset(+$margin),
            [ map $_->p, @bottom ],
        );
        push @top, map $surface->clone(expolygon => $_), @$grown;
    }
    
    # if we're slicing with no infill, we can't extend external surfaces
    # over non-existent infill
    my @fill_boundaries = $self->config->fill_density > 0
        ? @surfaces
        : grep $_->surface_type != S_TYPE_INTERNAL, @surfaces;
    
    # intersect the grown surfaces with the actual fill boundaries
    my @new_surfaces = ();
    foreach my $group (@{Slic3r::Surface::Collection->new(@top, @bottom)->group}) {
        push @new_surfaces,
            map $group->[0]->clone(expolygon => $_),
            @{intersection_ex(
                [ map $_->p, @$group ],
                [ map $_->p, @fill_boundaries ],
                1,  # to ensure adjacent expolygons are unified
            )};
    }
    
    # subtract the new top surfaces from the other non-top surfaces and re-add them
    my @other = grep $_->surface_type != S_TYPE_TOP && $_->surface_type != S_TYPE_BOTTOM, @surfaces;
    foreach my $group (@{Slic3r::Surface::Collection->new(@other)->group}) {
        push @new_surfaces, map $group->[0]->clone(expolygon => $_), @{diff_ex(
            [ map $_->p, @$group ],
            [ map $_->p, @new_surfaces ],
        )};
    }
    $self->fill_surfaces->clear;
    $self->fill_surfaces->append(@new_surfaces);
}

sub _detect_bridge_direction {
    my ($self, $expolygon, $lower_layer) = @_;
    
    my $grown = $expolygon->offset_ex(+$self->perimeter_flow->scaled_width);
    my @lower = @{$lower_layer->slices};       # expolygons
    
    # detect what edges lie on lower slices
    my @edges = (); # polylines
    foreach my $lower (@lower) {
        # turn bridge contour and holes into polylines and then clip them
        # with each lower slice's contour
        my @clipped = @{intersection_pl([ map $_->split_at_first_point, map @$_, @$grown ], [$lower->contour])};
        if (@clipped == 2) {
            # If the split_at_first_point() call above happens to split the polygon inside the clipping area
            # we would get two consecutive polylines instead of a single one, so we use this ugly hack to 
            # recombine them back into a single one in order to trigger the @edges == 2 logic below.
            # This needs to be replaced with something way better.
            if (points_coincide($clipped[0][0], $clipped[-1][-1])) {
                @clipped = (Slic3r::Polyline->new(@{$clipped[-1]}, @{$clipped[0]}));
            }
            if (points_coincide($clipped[-1][0], $clipped[0][-1])) {
                @clipped = (Slic3r::Polyline->new(@{$clipped[0]}, @{$clipped[1]}));
            }
        }
        push @edges, @clipped;
    }
    
    Slic3r::debugf "Found bridge on layer %d with %d support(s)\n", $self->id, scalar(@edges);
    return undef if !@edges;
    
    my $bridge_angle = undef;
    
    if (0) {
        require "Slic3r/SVG.pm";
        Slic3r::SVG::output("bridge_$expolygon.svg",
            expolygons      => [ $expolygon ],
            red_expolygons  => [ @lower ],
            polylines       => [ @edges ],
        );
    }
    
    if (@edges == 2) {
        my @chords = map Slic3r::Line->new($_->[0], $_->[-1]), @edges;
        my @midpoints = map $_->midpoint, @chords;
        my $line_between_midpoints = Slic3r::Line->new(@midpoints);
        $bridge_angle = Slic3r::Geometry::rad2deg_dir($line_between_midpoints->direction);
    } elsif (@edges == 1) {
        # TODO: this case includes both U-shaped bridges and plain overhangs;
        # we need a trapezoidation algorithm to detect the actual bridged area
        # and separate it from the overhang area.
        # in the mean time, we're treating as overhangs all cases where
        # our supporting edge is a straight line
        if (@{$edges[0]} > 2) {
            my $line = Slic3r::Line->new($edges[0]->[0], $edges[0]->[-1]);
            $bridge_angle = Slic3r::Geometry::rad2deg_dir($line->direction);
        }
    } elsif (@edges) {
        # inset the bridge expolygon; we'll use this one to clip our test lines
        my $inset = $expolygon->offset_ex($self->infill_flow->scaled_width);
        
        # detect anchors as intersection between our bridge expolygon and the lower slices
        my $anchors = intersection_ex(
            [ @$grown ],
            [ map @$_, @lower ],
            1,  # safety offset required to avoid Clipper from detecting empty intersection while Boost actually found some @edges
        );
        
        # we'll now try several directions using a rudimentary visibility check:
        # bridge in several directions and then sum the length of lines having both
        # endpoints within anchors
        my %directions = ();  # angle => score
        my $angle_increment = PI/36; # 5°
        my $line_increment = $self->infill_flow->scaled_width;
        for (my $angle = 0; $angle <= PI; $angle += $angle_increment) {
            # rotate everything - the center point doesn't matter
            $_->rotate($angle, [0,0]) for @$inset, @$anchors;
            
            # generate lines in this direction
            my $bounding_box = Slic3r::Geometry::BoundingBox->new_from_points([ map @$_, map @$_, @$anchors ]);
            
            my @lines = ();
            for (my $x = $bounding_box->x_min; $x <= $bounding_box->x_max; $x += $line_increment) {
                push @lines, Slic3r::Polyline->new([$x, $bounding_box->y_min], [$x, $bounding_box->y_max]);
            }
            
            my @clipped_lines = map Slic3r::Line->new(@$_), @{ intersection_pl(\@lines, [ map @$_, @$inset ]) };
            
            # remove any line not having both endpoints within anchors
            # NOTE: these calls to contains_point() probably need to check whether the point 
            # is on the anchor boundaries too
            @clipped_lines = grep {
                my $line = $_;
                !(first { $_->contains_point($line->a) } @$anchors)
                    && !(first { $_->contains_point($line->b) } @$anchors);
            } @clipped_lines;
            
            # sum length of bridged lines
            $directions{-$angle} = sum(map $_->length, @clipped_lines) // 0;
        }
        
        # this could be slightly optimized with a max search instead of the sort
        my @sorted_directions = sort { $directions{$a} <=> $directions{$b} } keys %directions;
        
        # the best direction is the one causing most lines to be bridged
        $bridge_angle = Slic3r::Geometry::rad2deg_dir($sorted_directions[-1]);
    }
    
    Slic3r::debugf "  Optimal infill angle of bridge on layer %d is %d degrees\n",
        $self->id, $bridge_angle if defined $bridge_angle;
    
    return $bridge_angle;
}

1;