Vojtech Bubnik
2eb0417018
Further Perl eradication
2022-10-27 20:01:55 +02:00
Vojtech Bubnik
57db091612
Removed Surface and SurfaceCollection from Perl bindings.
2022-10-27 19:43:56 +02:00
Vojtech Bubnik
d041fa6c0c
Refactored PerimeterGenerator to output out_fill_surfaces as ExPolygons,
...
not SurfaceCollection.
Reworked combineinfill.t, 07_extrusionpath.t, 08_extrusionloop.t to c++.
Removed Layer / ExtrusionPath / ExtrusionLoop / ExtrusionEntityCollection
from Perl bindings.
2022-10-27 19:08:43 +02:00
Vojtech Bubnik
d4b8d4d0f3
Further Perl unit test porting to C++ and Perl interface reduction:
...
Ported cooling, gap fill, thin walls and polyline unit tests.
2022-05-05 17:57:57 +02:00
Vojtech Bubnik
aa3231e2c5
Further slimming of Perl bindings.
2022-05-04 19:10:34 +02:00
Vojtech Bubnik
576c167bd5
Ported "avoid crossing perimeters" and bridging unit tests from Perl
...
to C++.
Further reduced Perl bindings.
Got rid of the ExPolygonCollection wrapper, replaced with ExPolygons.
2022-05-04 18:21:08 +02:00
Vojtech Bubnik
a627614b58
Perl unit tests for perimeters and multi-material were rewritten to C++.
...
Perl binding was slimmed down, namely Clipper is no more linked by Perl.
2022-05-04 15:06:04 +02:00
Vojtech Bubnik
33b2478b69
Ported Infill unit tests from Perl to C++.
2022-05-02 14:34:50 +02:00
Vojtech Bubnik
8e27e355c2
Fixing unit tests.
2021-03-15 09:55:56 +01:00
Vojtech Bubnik
4280fdb5f2
Reworked connection of infill lines to perimeter lines.
...
Added a new "infill_anchor" parameter.
2020-11-16 10:54:00 +01:00
bubnikv
0235f1a821
Merged with dev
2018-09-12 11:59:02 +02:00
bubnikv
ac72cd779f
Replaced Point3 with Eigen Vec3crd, removed Point3 from the Perl binding.
2018-08-21 22:14:47 +02:00
Enrico Turri
455076231b
Layers editing shader moved to c++
2018-05-25 14:05:08 +02:00
Enrico Turri
5024fc4be7
OpenGL to c++ 1st installment - WIP
2018-05-09 10:47:04 +02:00
bubnikv
32c4cddb91
Ported the AboutDialog to C++, thanks @alexrj for the work.
...
New "configuration" menu over the snapshots, user preferences etc.
2018-04-09 17:03:37 +02:00
bubnikv
e931f75010
Work in progress: Good bye, Perl Threads!
2018-03-23 11:41:20 +01:00
bubnikv
39100068c1
Removed the Perl Tab & BedDialog as they were replaced by their C++
...
counterparts.
2018-02-15 18:16:19 +01:00
bubnikv
09c9f6bdc3
Added TabIface C++ wrapper for GUI::Tab C++ class,
...
exported the TabIface to Perl.
2018-01-23 11:37:19 +01:00
bubnikv
9a0100d6de
Initial definition of PresetHints C++ class and Perl binding, ported the cooling logic hints to C++.
...
Removed Perl Flow::new_from_spacing bindings.
Some Fill C++11 beautification.
Fix of a support_material_1st_layer_flow, brim_flow and skirt_flow logic to use the extrusion_width if both first_layer_extrusion_width and support_material_extrusion_width are undefined.
Documented the extrusion width logic in the config tooltips, including the default values.
2017-11-09 10:48:06 +01:00
bubnikv
d9d6d996e9
Utility functions to pass wxWidgets pointers from Perl to C++ code.
...
C++ var_dir / set_var_dir() interface to access the UI resources
from the C++ code.
2017-10-17 20:00:15 +02:00
bubnikv
473233019c
Initial partial implementation of presets in C++.
2017-09-19 13:55:48 +02:00
bubnikv
0454cc95f9
Ported the cooling changes from @alexrj: Don't slow down the external
...
perimeters if not necessary, don't take the bridging time into account
when slowing down the print.
Removed Extruder & GCodeWriter Perl bindings.
Improved Extruder for constness.
Refactored GCode::m_elapsed_time to struct ElapsedTime.
2017-06-22 12:59:23 +02:00
bubnikv
e90279c513
Ported the G-code generator from Perl to C++.
...
Removed GCode.pm
Removed the Perl bindigns for AvoidCrossingPerimeters, OozePrevention, SpiralVase, Wipe
Changed the std::set of extruder IDs to vector of IDs.
Removed some MSVC compiler warnings, removed obnoxious compiler warnings when compiling the Perl bindings.
2017-05-03 18:28:22 +02:00
bubnikv
045de596e2
Use OpenGL 2.0 shaders for the layer height rendering.
...
Use OpenGL 2.0 shaders for the print path rendering for performance reasons.
2017-03-20 12:05:20 +01:00
bubnikv
e6fddd364d
Volume rewritten from Perl to C++,
...
generation of vertex arrays from paths rewritten from Perl to C++,
parallelized.
2017-03-13 16:02:17 +01:00
bubnikv
08351b5e48
Fix of ExtrusionMultiPath binding to Perl & G-code generator.
2017-01-20 15:17:32 +01:00
bubnikv
e016c4e423
New extrusion class: ExtrusionMultiPath
...
This is similar to an ExtrusionLoop, but it is open.
It may contain multiple chained paths with differing parameters.
This allows one to have a hierarchy of paths, where the ExtrusionEntityCollection
will be chained by the G-code generator, but ExtrusionMultiPath will not.
2017-01-19 13:35:55 +01:00
bubnikv
4e66ed81d2
Fixed the fill density for rectilinear, triangular and cubic infills.
...
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
2016-10-27 17:03:57 +02:00
bubnikv
7d7f093120
C++ supports sketched, but not finalized yet. Slic3r is still using
...
the old Perl supports, but this time with the C++ fillers.
2016-10-16 16:30:56 +02:00
bubnikv
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
bubnikv
7da68c91a5
Vojtech likes to use Sublime on Windows to get the wheels rolling.
2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
3c862836f2
Refactored the Config XS bindings
2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
801f629fdc
Ported Slic3r::GCode storage to XS
2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7
Ported Slic3r::GCode::OozePrevention storage to XS
2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766
Ported Slic3r::GCode::Wipe storage to XS
2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6
Ported Slic3r::GCode::AvoidCrossingPerimeters to XS
2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
a5c0ffe963
Faster loading of 3D preview and much less memory used
2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
18e815d032
More efficient 3D preview of slices
2015-01-15 18:49:07 +01:00
Alessandro Ranellucci
9264db7ecd
Removed useless thing added in e79aa2e81c
2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
fcfb3b98bc
3D object positioning
2014-12-16 01:12:56 +01:00
Alessandro Ranellucci
379cde30e2
Ported Slic3r::BridgeDetector to XS
2014-11-15 22:41:22 +01:00
Alessandro Ranellucci
ee3fb7caa2
Ported GCodeWriter to XS (faster G-code export!)
2014-11-09 19:02:45 +01:00
Alessandro Ranellucci
b69caff93c
Ported LayerRegion::make_slices() to XS
2014-11-09 16:24:07 +01:00
Alessandro Ranellucci
5435d88924
Bugfix: wrong arguments supplied to Flow constructor (rarely used case)
2014-08-08 02:56:25 +02:00
Alessandro Ranellucci
f462af20f9
Visual preview for bed shape dialog
2014-08-03 00:20:55 +02:00
Y. Sapir
d06c300926
Add ::Ref classes for every missing C++ class (going by REGISTER_CLASS calls).
2014-05-24 23:50:44 +03:00
Y. Sapir
8da0bded1d
Move Print object storage to C++. (along with its subobjects)
2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
6e207d3830
Merge branch 'sapir-modelcpp'
2014-05-08 11:13:21 +02:00
Alessandro Ranellucci
c37ef2f18b
New semantics for ExtrusionLoop objects. Early processing of perimeter overhangs for paralellizing such work and making G-code export lighter. Lots of refactoring. This should fix a number of minor bugs, including reversals of perimeter overhangs.
2014-05-08 11:07:37 +02:00
