Alessandro Ranellucci
3cf5f86ce0
Avoid G92 for Mach3. #220
2012-03-04 11:49:04 +01:00
Alessandro Ranellucci
4a72c77150
Maximize fill/perimeter contact for line infill pattern
2012-03-04 11:45:45 +01:00
Alessandro Ranellucci
be9886eac3
Bugfix: fill escapes perimeters. #139
2012-03-04 11:26:11 +01:00
Alessandro Ranellucci
4a4c4b4e7d
Raise version number
2012-03-03 23:38:41 +01:00
Alessandro Ranellucci
d0807aa807
Allow to use config options in start/end G-code
2012-03-03 23:29:08 +01:00
Alessandro Ranellucci
f2032686da
Ensure fan is turned off at start if disable_fan_first_layers > 0
2012-03-03 23:18:02 +01:00
Alessandro Ranellucci
7892a84408
Refactoring and integrations to the bed temperature handling
2012-03-03 23:14:40 +01:00
Michael Moon
35e7877437
bed temperature handling. TODO: gui elements
2012-03-03 23:08:50 +01:00
Alessandro Ranellucci
8566b4f910
Separate the Slice button a bit
2012-03-03 22:53:12 +01:00
Alessandro Ranellucci
5c79024215
Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)."
...
This reverts commit 266f7799dd
2012-03-03 22:50:08 +01:00
Alessandro Ranellucci
2c16509e8a
Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237
2012-03-03 22:28:44 +01:00
Alessandro Ranellucci
471f015ef4
Add --use-relative-e-distances back to the --help too
2012-03-03 22:25:56 +01:00
Alessandro Ranellucci
06c22c9db3
New --fan-always-on option. #241 #110
2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
c7006fed26
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
2ff3ab1faf
Remove G0 from GUI until a firmware implements it
2012-03-03 21:37:10 +01:00
Alessandro Ranellucci
b5cba48e55
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
e8c64924db
Some GUI fixes after the recent contributions
2012-03-03 21:25:26 +01:00
Alessandro Ranellucci
6b31563b70
Merge pull request #236 from sfcgeorge/improved-ui
...
Made the UI look quite a bit nicer (OS X 10.7 tested).
2012-03-03 12:04:35 -08:00
Simon George
266f7799dd
Made the UI look quite a bit nicer (OS X 10.7 tested).
...
* Added link to website for updates
* Moved 'Slice…' button to the right as this more logically follows the
user's flow through the application
* Moved version information to the middle right under the App name (on
OS X anyway) as it is clearer what the version is referring to
* Added spacing between the buttons
* Removed colon after 'version' as this is the UI convention in about
boxes
* Changed 'Load' to 'Open' as this is the more commonly used term
* Truncated 'Configuration' to 'Config' to save space, and I believe it
is still clear what it means
* Added open and save config to File menu as this is more conventional
location
* Simplified some wording
* Rephrased the tabs to be more succinct, I believe they still make
sense
* Fixed a spelling
* Replaced '…' with proper ellipses character
2012-02-28 23:04:19 +00:00
Alessandro Ranellucci
f0e434f8c1
Fix typo in previous commit and in config options. #234
2012-02-28 22:04:48 +01:00
Alessandro Ranellucci
0520d1645b
Bugfix: retraction wasn't triggered when moving between copies. #232
2012-02-28 21:55:32 +01:00
Alessandro Ranellucci
8cac0f8c87
Merge pull request #227 from henrikbrixandersen/master
...
Fail silently if Growl was stopped after Slic3r was started
2012-02-27 02:55:53 -08:00
Henrik Brix Andersen
ca49965210
Fail silently if Growl was stopped after Slic3r was started
2012-02-26 19:44:15 +01:00
Alessandro Ranellucci
9332319e10
Fail silently if Growl::GNTP fails
2012-02-26 19:29:25 +01:00
Alessandro Ranellucci
f451bb2bd0
Use XML::SAX::PurePerl instead of XML::SAX::ExpatXS for now
2012-02-26 18:17:23 +01:00
Alessandro Ranellucci
b0676b226d
Releasing 0.7.0
2012-02-26 18:01:05 +01:00
Alessandro Ranellucci
b9f30d8378
Bugfix: AMF files with no materials were not successfully parsed
2012-02-26 16:22:45 +01:00
Alessandro Ranellucci
79bc2240fb
Use first layer temperature for M109 too
2012-02-26 15:09:28 +01:00
Alessandro Ranellucci
dccd7d19a9
First layer temperature. #134
2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
f1f0545209
Bugfix: --extrusion-axis didn't accept an argument
2012-02-26 11:33:58 +01:00
Alessandro Ranellucci
554534fcad
Optimization
2012-02-26 11:18:42 +01:00
Alessandro Ranellucci
be0e1a6e0b
Bugfix: fill escapes perimeters. However, we keep it disabled. #139
2012-02-25 22:41:53 +01:00
Alessandro Ranellucci
c98f6734c7
Code optimization
2012-02-25 22:18:07 +01:00
Alessandro Ranellucci
170d29a789
New --cooling option and checkbox to enable/disable fan and cooling control
2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
70e69be60a
Bugfix: support material was generated under most bridges
2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
1d0a852679
Cooling and fan control. #110
2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
f4fde54bf3
Add extrusion multiplier to gcode comments. #222
2012-02-25 19:24:46 +01:00
Alessandro Ranellucci
9f5e48bd2c
Wrong optimization
2012-02-25 17:40:30 +01:00
Alessandro Ranellucci
959230b099
Refactoring: moved Slic3r::STL and Slic3r::AMF to Slic3r::Format::*
2012-02-25 17:35:25 +01:00
Alessandro Ranellucci
2a86932cfe
Slight code optimizations
2012-02-25 17:16:55 +01:00
Alessandro Ranellucci
848bf91244
Multithreaded support material generation
2012-02-25 16:51:08 +01:00
Alessandro Ranellucci
044053a3f7
Bugfix: medial axis was not using new Douglas-Peucker implementation
2012-02-25 16:27:33 +01:00
Alessandro Ranellucci
cc695c6c22
Support material: refactoring
2012-02-25 16:23:41 +01:00
Alessandro Ranellucci
a24ffee2aa
New polygon_is_convex() function
2012-02-25 16:14:59 +01:00
Alessandro Ranellucci
2d130061ed
Increase small holes threshold to holes having a 6.5mm radius
2012-02-25 16:14:28 +01:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
94e673e050
Backwards compatibility for people using relative E distances on RepRap firmwares
2012-02-24 23:12:16 +01:00
Alessandro Ranellucci
ad3834f939
Merge pull request #221 from tjhowse/patch-1
...
Removed the comment about not generating support material...
2012-02-24 11:14:36 -08:00
Alessandro Ranellucci
79aead7c9d
Experimental hole compensation
2012-02-24 20:13:17 +01:00
tjhowse
2fb9f147af
Removed the comment about not generating support material, as it now does have this feature.
2012-02-24 23:49:02 +10:00
