Alessandro Ranellucci
83065b0789
Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value
2013-03-17 01:10:40 +01:00
Alessandro Ranellucci
04c0caad0b
Fix honeycomb infill overlap with perimeters
2013-03-17 00:57:58 +01:00
Alessandro Ranellucci
0f5064dd32
Untested fix for incomplete honeycomb support material. #1032
2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
090e3b1fe3
Rename shortest_path to chained_path, which reflects its algorithm more correctly
2013-02-05 17:27:45 +01:00
Alessandro Ranellucci
2963e54d21
Use the faster polygon_multi_linestring_intersection()
2013-01-28 00:32:19 +01:00
Alessandro Ranellucci
1774143011
Bugfix: PlanePath fill patterns were not working anymore. #880
2012-12-31 14:11:36 +01:00
Alessandro Ranellucci
aff0898f35
Typo
2012-11-16 18:24:09 +01:00
Alessandro Ranellucci
86f5cb8654
Previous commit about bridge spacing was incomplete
2012-11-16 18:10:09 +01:00
Alessandro Ranellucci
cb4ede7f9e
Do not pass the Print object to SVG::output anymore
2012-11-01 11:34:53 +01:00
Alessandro Ranellucci
cec7bf815c
Get rid of the ExtrusionLoop objects in concentric filler
2012-10-30 15:29:13 +01:00
Alessandro Ranellucci
20e73face2
Get rid of max_print_dimension in filler objects
2012-10-30 15:09:54 +01:00
Alessandro Ranellucci
6c97e588b1
Don't require the print object in filler objects
2012-10-30 14:34:41 +01:00
Alessandro Ranellucci
5943114574
Only take layer_id instead of layer in filler objects
2012-10-30 14:25:48 +01:00
Alessandro Ranellucci
61047f0df5
Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate
2012-10-30 14:21:59 +01:00
Alessandro Ranellucci
610862a97f
Use the actual flow spacing for clipping concentric loops
2012-10-30 14:17:30 +01:00
Alessandro Ranellucci
0a5016a509
Cleaner usage of the PI constant
2012-10-30 14:15:48 +01:00
Alessandro Ranellucci
be7e211bb6
Make flow_spacing required for ExtrusionPath objects
2012-10-30 14:07:01 +01:00
Alessandro Ranellucci
f2389682b6
Factor out some hard-coded settings
2012-10-29 00:23:33 +01:00
Alessandro Ranellucci
6beaf5e597
New faster algorithm for filling gaps, while we work on a new medial axis implementation
2012-10-24 16:17:09 +02:00
Alessandro Ranellucci
0990a9418c
Bugfix: honeycomb infill was overlapping too much with perimeters. #732
2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
bbe0a45b58
Optimization: cache scaled flow width and spacing
2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
e0d5f4e528
Replace 'scale epsilon' with 'scaled_epsilon'
2012-09-12 15:22:43 +02:00
Alessandro Ranellucci
bb5f00cf0c
Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666
2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
ba58e0733f
Avoid backwards moves when doing honeycomb infill. #492
2012-08-24 19:19:45 +02:00
Alessandro Ranellucci
5281b101f9
Some infill paths were still disconnected, causing unnecessary retractions
2012-08-24 18:59:23 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
9e77e6e8b6
Removed comment about the shortest path search for honeycomb not being useful: it is. #512
2012-07-04 10:02:45 +02:00
Mark Hindess
35ecd65e77
Implement nearest point index and split at index to avoid search for point.
2012-07-02 20:26:56 +01:00
Alessandro Ranellucci
0372d06247
Releasing 0.8.4
2012-06-24 16:50:09 +02:00
Alessandro Ranellucci
f88f516c30
Optimize honeycomb travels
2012-06-24 16:09:24 +02:00
Alessandro Ranellucci
bf1aba3d08
New --support-material-pattern and --support-material-angle options
2012-06-23 22:43:23 +02:00
Alessandro Ranellucci
53d24bc580
Bugfix: some infill paths were not connected. #477
2012-06-23 20:27:28 +02:00
Alessandro Ranellucci
be8970b497
Fixed regression causing infill lines not being always connected near perimeters
2012-06-19 18:49:46 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
74c00cdb7a
Yes, recent memory optimizations broke concentric infill too
2012-05-19 23:47:36 +02:00
Alessandro Ranellucci
b360b2bcea
Fixed regression causing side gaps in solid infill
2012-05-19 21:57:47 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
4b7e9fc284
Fixed regression causing poor adhesion of rectilinear infill to perimeters
2012-05-04 20:51:09 +02:00
Alessandro Ranellucci
84d9368bf6
Bugfix: error on Honeycomb infill
2012-04-30 17:55:32 +02:00
Alessandro Ranellucci
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
17a4426358
Fixed regression throwing fatal error with honeycomb infill
2012-04-29 18:05:23 +02:00
Alessandro Ranellucci
fc0fa0c738
Remove Rectilinear2 infill
2012-04-16 14:06:52 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
fc76104aa7
Merge branch 'boost-geometry'
2012-04-10 15:52:44 +02:00
Alessandro Ranellucci
a8adff53ca
New implementation of support material
2012-04-09 22:06:30 +02:00
Alessandro Ranellucci
5bfe19a8b9
Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes ( #305 ).
2012-04-09 11:04:32 +02:00
Alessandro Ranellucci
965a4e1bfd
Make sure all concentric fill loops are extruded ccw. #298
2012-04-03 14:11:12 +02:00
