Alessandro Ranellucci
|
0afb5ad9dd
|
Bugfix: some holes were filled. #291
|
2012-04-02 11:40:12 +02:00 |
|
Alessandro Ranellucci
|
d791315b4a
|
Bugfix: fatal error when generating skirt for layers having only two-point thin walls. #295
|
2012-03-31 18:32:53 +02:00 |
|
Alessandro Ranellucci
|
1355833cbf
|
Use M109 for Makerbot bed control. #294
|
2012-03-31 18:24:12 +02:00 |
|
Alessandro Ranellucci
|
2aa786c95f
|
Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect)
|
2012-03-26 19:47:21 +02:00 |
|
Alessandro Ranellucci
|
69942d2076
|
Bugfix: certain values of first layer height ratio caused slicing errors
|
2012-03-11 16:31:39 +01:00 |
|
Alessandro Ranellucci
|
d0807aa807
|
Allow to use config options in start/end G-code
|
2012-03-03 23:29:08 +01:00 |
|
Alessandro Ranellucci
|
f2032686da
|
Ensure fan is turned off at start if disable_fan_first_layers > 0
|
2012-03-03 23:18:02 +01:00 |
|
Michael Moon
|
35e7877437
|
bed temperature handling. TODO: gui elements
|
2012-03-03 23:08:50 +01:00 |
|
Alessandro Ranellucci
|
2c16509e8a
|
Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237
|
2012-03-03 22:28:44 +01:00 |
|
Alessandro Ranellucci
|
06c22c9db3
|
New --fan-always-on option. #241 #110
|
2012-03-03 22:21:30 +01:00 |
|
Alessandro Ranellucci
|
c7006fed26
|
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
|
2012-03-03 22:16:38 +01:00 |
|
Alessandro Ranellucci
|
b5cba48e55
|
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
|
2012-03-03 21:27:33 +01:00 |
|
Alessandro Ranellucci
|
f0e434f8c1
|
Fix typo in previous commit and in config options. #234
|
2012-02-28 22:04:48 +01:00 |
|
Alessandro Ranellucci
|
0520d1645b
|
Bugfix: retraction wasn't triggered when moving between copies. #232
|
2012-02-28 21:55:32 +01:00 |
|
Alessandro Ranellucci
|
79bc2240fb
|
Use first layer temperature for M109 too
|
2012-02-26 15:09:28 +01:00 |
|
Alessandro Ranellucci
|
dccd7d19a9
|
First layer temperature. #134
|
2012-02-26 14:54:38 +01:00 |
|
Alessandro Ranellucci
|
170d29a789
|
New --cooling option and checkbox to enable/disable fan and cooling control
|
2012-02-25 21:56:36 +01:00 |
|
Alessandro Ranellucci
|
70e69be60a
|
Bugfix: support material was generated under most bridges
|
2012-02-25 21:39:01 +01:00 |
|
Alessandro Ranellucci
|
1d0a852679
|
Cooling and fan control. #110
|
2012-02-25 21:01:00 +01:00 |
|
Alessandro Ranellucci
|
f4fde54bf3
|
Add extrusion multiplier to gcode comments. #222
|
2012-02-25 19:24:46 +01:00 |
|
Alessandro Ranellucci
|
848bf91244
|
Multithreaded support material generation
|
2012-02-25 16:51:08 +01:00 |
|
Alessandro Ranellucci
|
cc695c6c22
|
Support material: refactoring
|
2012-02-25 16:23:41 +01:00 |
|
Alessandro Ranellucci
|
eba7c10018
|
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
|
2012-02-25 14:46:21 +01:00 |
|
Alessandro Ranellucci
|
94e673e050
|
Backwards compatibility for people using relative E distances on RepRap firmwares
|
2012-02-24 23:12:16 +01:00 |
|
Alessandro Ranellucci
|
555c23069d
|
New --post-process option. Includes some cleaning of the STDOUT messages
|
2012-02-20 12:50:05 +01:00 |
|
Alessandro Ranellucci
|
ae35df716f
|
Little refactoring, new TriangleMesh->align_to_origin method
|
2012-02-20 11:47:21 +01:00 |
|
Alessandro Ranellucci
|
615bcb27dd
|
New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158
|
2012-02-20 11:44:30 +01:00 |
|
Alessandro Ranellucci
|
94a2585b97
|
Dual extruder for support material
|
2012-02-19 17:02:49 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
e0e2023a5a
|
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
|
2012-02-19 10:48:58 +01:00 |
|
Alessandro Ranellucci
|
a9e7204fc6
|
New slicing algorithm based on a topological approach rather than numeric. It should be much more robust
|
2012-02-18 20:36:14 +01:00 |
|
Alessandro Ranellucci
|
f814ccf062
|
Refactoring: use indexed vertices
|
2012-02-17 13:56:17 +01:00 |
|
Alessandro Ranellucci
|
68f001a7de
|
Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled
|
2012-02-14 21:57:53 +01:00 |
|
Alessandro Ranellucci
|
74c71b4ef2
|
Acceleration control. #185
|
2012-02-10 14:53:44 +01:00 |
|
Alessandro Ranellucci
|
ad8c9d4ea1
|
Bugfix: model with rounded walls had small useless infill regions. #177
|
2012-02-10 14:42:54 +01:00 |
|
Henrik Brix Andersen
|
121895d3fc
|
Add support for notes field in configuration profiles. #130
|
2012-02-05 20:55:17 +01:00 |
|
Alessandro Ranellucci
|
4a9672bd88
|
Use about 40% less memory
|
2012-01-28 21:52:31 +01:00 |
|
Alessandro Ranellucci
|
a4194554c9
|
Write single wall width (extrusion width) to the G-code file
|
2012-01-21 17:02:55 +01:00 |
|
Alessandro Ranellucci
|
a0ebee2ca3
|
Warn if no layers were detected
|
2012-01-21 11:34:03 +01:00 |
|
Alessandro Ranellucci
|
92cdaf2f2d
|
Retract at end of print
|
2012-01-20 14:48:51 +01:00 |
|
Alessandro Ranellucci
|
bba91fc0a5
|
Some better debug messages and a note about self-intersecting polygons. #160
|
2012-01-18 18:59:34 +01:00 |
|
Alessandro Ranellucci
|
0184b0f205
|
Fixed many little things that were not updated along with recent large refactoring. #157 #144
|
2012-01-11 20:13:26 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
4b2bd7f779
|
Bugfix: wrong month number in output
|
2011-12-30 18:57:58 +01:00 |
|
Alessandro Ranellucci
|
f08ebe97b2
|
Bugfix: fatal error for some models and thin walls not considered for skirt
|
2011-12-30 18:51:48 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
55045e0437
|
Limit skirt height to the print height. #128
|
2011-12-22 11:57:26 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|