Alessandro Ranellucci
3e3cc4171c
TODO about bridges and support material
2014-04-29 23:40:52 +02:00
Alessandro Ranellucci
ef2296dc8d
Make sure interface and base generation honor the gap between support material and object
2014-04-29 23:29:52 +02:00
Alessandro Ranellucci
ed1c6d1aaa
Removed debugging line
2014-04-29 23:17:01 +02:00
Alessandro Ranellucci
98e40d3fe4
Store width and height in ExtrusionEntity objects for debugging purposes
2014-04-29 23:16:16 +02:00
Petr Ledvina
78a08e0665
Commented out test (breakpoint) line
2014-04-29 22:55:10 +02:00
Alessandro Ranellucci
a31b2e6ca2
Stricter implementation of the overhang detection. Includes unit tests
2014-04-29 19:58:58 +02:00
Alessandro Ranellucci
caf7b3f97e
Prune bridge angles
2014-04-29 18:36:50 +02:00
Alessandro Ranellucci
7a9dec3720
One more change to multi-value placeholders: indices start from 0. #1899
2014-04-29 17:12:00 +02:00
Alessandro Ranellucci
a4b6075600
Fixed regression and ambiguity about multiple-value placeholders like [first_layer_temperature_1]. Includes several unit tests covering regression. #1899
2014-04-29 17:06:31 +02:00
Alessandro Ranellucci
913ab54a2b
Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907
2014-04-29 15:25:14 +02:00
Alessandro Ranellucci
0b0ec7be37
Fixed regression causing bad loading of multi-extruder values in GUI. #1984
2014-04-28 22:31:29 +02:00
Alessandro Ranellucci
f7421053cc
Improvements to bridge angle detection: use coverage test for all cases (including two-sided bridges and C-shaped bridges) and check for all angles equal to directions of bridge sides
2014-04-28 22:15:40 +02:00
Alessandro Ranellucci
24571612c7
Some minor changes to the newly-ported Extruder class
2014-04-28 22:02:34 +02:00
Alessandro Ranellucci
4c330b6c59
Merge pull request #1968 from sapir/extrudercpp
...
Translate Extruder class to C++
2014-04-28 21:45:53 +02:00
Alessandro Ranellucci
2720000a17
New get_trapezoids() implementation. Maybe heavier but it doesn't fail with some versions of GCC like the one provided by Boost.Polygon. #1965
2014-04-28 20:14:20 +02:00
Y. Sapir
ad03a88733
Add xsp wrapper for Pointf class.
2014-04-28 01:13:50 +03:00
Y. Sapir
e005ff32c4
Replace Extruder::config accessor with Perl wrapper, with C++ option accessors.
2014-04-28 00:49:05 +03:00
Y. Sapir
2565d80679
Replace multitude of Extruder fields with querying a PrintConfig object by id.
2014-04-27 23:43:44 +03:00
Y. Sapir
66d23a2416
Convert Extruder object (mostly) to C++ with lots of fields.
2014-04-27 23:42:59 +03:00
Alessandro Ranellucci
2738a304e8
Update credits. Mention Gary Hodgson, Petr Ledvinap, Y. Sapir
2014-04-27 20:04:02 +02:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
148c773319
Exclude support from bridged areas
2014-04-26 16:07:43 +02:00
Alessandro Ranellucci
073b7fca1f
One more fix after recent fix to default extrusion width
2014-04-25 20:19:02 +02:00
Alessandro Ranellucci
9ee3868f92
Removed debugging line left
2014-04-25 20:05:08 +02:00
Alessandro Ranellucci
6780e930cb
Update the [timestamp] placeholder(s) at every G-code export. #1957
2014-04-25 19:47:13 +02:00
Alessandro Ranellucci
7ac0095018
Fix regression causing default extrusion width to be ignored. #1958
2014-04-25 19:39:27 +02:00
Alessandro Ranellucci
f6897a346a
Fix islands not being ordered efficiently with the logic that completes each of them before moving to the next one (which is now the default behavior). #1137
2014-04-25 19:11:17 +02:00
Alessandro Ranellucci
2a2ba15665
Use a slider for the cutting GUI
2014-04-25 18:36:08 +02:00
Alessandro Ranellucci
8db4913b04
New option for rotating the lower part resulting from the cut so that the flat surface lies on the print bed
2014-04-25 17:50:03 +02:00
Alessandro Ranellucci
4f17c2b7d1
First working implementation of a GUI for cutting
2014-04-25 17:14:39 +02:00
Alessandro Ranellucci
882a98ed44
Initial work for a GUI for the cut feature
2014-04-25 14:54:08 +02:00
Alessandro Ranellucci
fe1691c151
New --cut feature
2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
6201aacf88
New coverage detection for bridges. Includes implementation of ExPolygon::get_trapezoids()
2014-04-24 13:44:39 +02:00
Petr Ledvina
802ebfb0d6
Fix bridge detector
...
Test line direction is changed to reflect 0=east angle system
Test patern rotation direction is reversed - $angle represents infill direction
Angle test is changed to avoid returning negative value (this does happen otherwise - adding increments to $angle
creates ~ 1e-15 rounding error)
2014-04-23 11:35:58 +02:00
Alessandro Ranellucci
3a49dccf69
Bugfix: version check caused crash
2014-04-22 11:59:01 +02:00
Alessandro Ranellucci
9989ebaabd
Refactored the BridgeDetector class to expose a cleaner API and make it stateful
2014-04-22 00:59:14 +02:00
Alessandro Ranellucci
bc101bd93e
Assume bridge angle is stored in radians in infill generation. #1917
2014-04-21 23:21:15 +02:00
Alessandro Ranellucci
f7e8a99078
More tests and related fixes to bridge detection. #1917
2014-04-21 20:44:21 +02:00
Alessandro Ranellucci
7041ebdd22
Workaround for upstream module bug causing command line option parsing for multi-boolean options like retract-layer-change and wipe
2014-04-19 19:14:41 +02:00
Alessandro Ranellucci
5d10ef514f
Workaround wxWidgets not allowing SetValue() inside a EVT_COMBOBOX handler on Windows. #1865
2014-04-19 18:42:52 +02:00
Alessandro Ranellucci
a49e786b04
Handle EVT_TEXT on wxSpinCtrl too
2014-04-19 18:29:40 +02:00
Alessandro Ranellucci
6e6fb427fb
Fixes for the last commit about kill focus. #1873
2014-04-19 18:16:34 +02:00
Alessandro Ranellucci
10a5a061d4
Bugfix: wxWidgets on Windows needs Skip() on kill focus to prevent nasty focus bugs. #1873
2014-04-19 18:05:01 +02:00
Alessandro Ranellucci
a248c98192
Fixed regression when concentric infill was used as solid infill. Includes regression test. #1650
2014-04-19 16:53:37 +02:00
Alessandro Ranellucci
c3bb8a69db
Bugfix: crash when extending an array option by 2+ positions. #1908
2014-04-19 16:38:28 +02:00
Alessandro Ranellucci
f6e99f1467
Bugfix: [filament_preset] was not replaced in filename when using Quick Slice. #1870
2014-04-19 12:10:15 +02:00
Alessandro Ranellucci
1e5dcd8154
Always do one island at time instead of doing that only when avoid_crossing_perimeters is enabled. #1907
2014-04-19 11:57:01 +02:00
Alessandro Ranellucci
f51921a11a
Default extruder wasn't applied to perimeter extruder. Includes regression test. #1868
2014-04-19 11:43:41 +02:00
Alessandro Ranellucci
0c50ab5323
Removed duplicated method added to Slic3r::Line in caf20664cd. #1945
2014-04-19 10:52:12 +02:00
Alessandro Ranellucci
caf20664cd
Bugfix: ExPolygon::contains_line() was called with a Polyline object but didn't throw any error. Thanks ledvinap #1945
2014-04-19 01:26:21 +02:00
