Pascal de Bruijn
a8872a9211
Creality.ini: Add alternative nozzle support
2022-07-31 16:05:46 +02:00
Lukáš Hejl
394494b3ac
Fix of #8530 : Pressure equalizer unintentionally decelerates before ironing.
...
This is the follow-up to: 39404be75a
2022-07-28 11:42:57 +02:00
Lukáš Hejl
9168b60463
Prevented the pressure equalizer from emitting G-code settings feed rate when there are no G-code lines that will be affected (empty block of G-code lines with set feed rate).
2022-07-28 11:42:53 +02:00
Merill
72aba9a5be
Little fix: back() isn't front()
2022-07-28 03:02:29 +02:00
Lukáš Hejl
77f5973c25
Fix of #8446 : Non-planar Voronoi diagram.
...
This is the follow-up to 63c66f4f18
2022-07-26 13:47:40 +02:00
YuSanka
e0031018a7
Manually merged PR #8544 - Add 2.5.0 translate for zh_CN language
2022-07-22 16:53:11 +02:00
Lukáš Hejl
dd6096bf0b
Fix of #8457 and #8461 : Made pressure equalizer to modify only GCode lines that are inside the block tags _EXTRUDE_SET_SPEED and _EXTRUDE_END.
...
The previous approach could modify all GCode lines, even custom GCode or tool change GCode, which was unintentional.
2022-07-22 11:32:37 +02:00
Lukáš Hejl
decfa80bfd
Test case for issue when Arachne produce closed ExtrusionLine that have different the first and the last point.
2022-07-22 08:33:27 +02:00
Lukáš Hejl
e14da6224a
Fixed an issue when an open perimeter containing part of an overhang perimeter was split into two parts and wasn't extruded as continuous extrusion.
2022-07-22 08:33:27 +02:00
Lukáš Hejl
2a865919a0
Prevented gap fill and Arachne from creating tiny gaps in extrusions in specific cases.
2022-07-22 08:33:27 +02:00
YuSanka
1150639306
Gallery: Update for recycling symbols
2022-07-21 10:44:09 +02:00
Lukáš Hejl
63c66f4f18
Fix of #8474 and #8514 : Voronoi generator sometimes produced a non-planar Voronoi diagram.
...
We introduced detecting for those degeneration cases. When degenerated Voronoi diagram is detected, then the input polygons are rotated, and the Voronoi diagram is recomputed. Usually, rotation of input data solves issues like this.
2022-07-21 08:47:48 +02:00
enricoturri1966
9690919028
Fixed GLGizmoBase::render_input_window() to properly require for an extra frame the first time an imgui window is shown
2022-07-19 13:12:13 +02:00
Lukas Matena
a965956cba
Removed extra member qualification in declaration (does not build with /permissive-)
2022-07-19 10:53:41 +02:00
enricoturri1966
76562d1e75
SPE-1252 - Fixed update of contours in Cut Gizmo when modifying the orientation or the scale of a part of a multipart object
2022-07-18 15:38:56 +02:00
Lukas Matena
38f10da566
Bumped up version to 2.5.0-alpha3
2022-07-15 14:06:23 +02:00
Lukas Matena
edc0aa4bce
Mentioned CuraEngine in the CopyrightsDialog
2022-07-15 13:58:17 +02:00
Lukas Matena
04555862b0
Merge branch 'pm_seam_curling_fix_250' into master_250
2022-07-14 18:07:39 +02:00
Pavel Mikus
70677858a1
Use resampling only with smooth surfaces generated by Arachne
2022-07-14 18:00:59 +02:00
Pavel Mikus
2e437d1761
curling improvements
2022-07-14 11:47:29 +02:00
Pavel Mikus
d5d1633e2b
Bugfix: seam enforcers and blockers not respected on different nozzle widths -
...
now flow width is used instead of fixed distance param
2022-07-14 10:15:05 +02:00
Pavel Mikus
f5efb0d0aa
remove global angle computation, wrong results
2022-07-14 10:15:05 +02:00
Pavel Mikus
4a9f9aa89b
oversample smooth surfaces, which reduces curling on those surfaces, because the shortest path down is better defined
2022-07-14 10:15:05 +02:00
Pavel Mikus
40408c2178
increase snapping angle
2022-07-14 10:15:05 +02:00
PavelMikus
768bfd5c7f
reduce curling
2022-07-14 10:15:05 +02:00
PavelMikus
c65e22e6bb
refactored find_seam_string func
2022-07-14 10:15:05 +02:00
PavelMikus
4d8e8afb10
Count seam string weight and try mutiple strings; choose highest weight
2022-07-14 10:15:05 +02:00
Pavel Mikus
f31865a627
increase weight of central seam enforcers
2022-07-14 10:15:05 +02:00
Pavel Mikus
232517fe77
choose seam string with lower variance weighted by visibility
2022-07-14 10:15:05 +02:00
Pavel Mikus
feeb9b2b1b
bug fixes in the linear regression
2022-07-14 10:15:05 +02:00
PavelMikus
fec3afa490
cubic spline segment size based on the length of string
2022-07-14 10:15:05 +02:00
PavelMikus
1e05d09324
search points based on updated linear regression model (line), make search raidus dynamic based on layer thickenss
2022-07-14 10:15:05 +02:00
Lukáš Hejl
39404be75a
Fix of #8471 - Pressure equalizer caused unintentional deceleration before ironing and acceleration after ironing.
2022-07-14 09:30:37 +02:00
Lukáš Hejl
b4ff9b72a9
Fix of #8455 - Incorrect scale in ExtrusionLine::simplify() prevented removing vertices between collinear and nearly collinear lines.
2022-07-14 09:10:25 +02:00
Lukáš Hejl
e2e1272003
Fix of #8455 - Fixed the incorrect computation of the threshold for grouping ExtrusionPaths with the same extrusion width in thick_polyline_to_extrusion_paths() that was affecting Arachne and gap fill.
...
The previous behavior didn't merge two ExtrusionPaths with the same extrusion width, and it also could merge two ExtrusionPaths with different widths, which was unintentional, and it could also possibly create visible artifacts in some cases.
Because simplification of ExtrusionLoop in GCode::extrude_loop is working on ExtrusionPath and not on whole ExtrusionLoop, so previous incorrect behavior was preventing simplification and removing small extrusions like in #8455 .
2022-07-14 09:10:22 +02:00
YuSanka
200ab7441b
Added notification about "Lightning infill" + localization for this line
2022-07-13 11:11:32 +02:00
YuSanka
bd077ae401
Search: Fix of the wrong search, when print technology was changed, but search line wasn't inputted.
...
Partially reverted a248490507#8376 - SEARCH {CTRL-F}
2022-07-13 10:14:07 +02:00
Lukáš Hejl
22255822a2
Fix of #8488 - Infinite loop in the lightning infill.
2022-07-12 18:59:48 +02:00
YuSanka
92f874cdea
Fix for #8450 - Tip Of The Day - configuration snapshots shortcut not work in the language Portuguese Brazil
...
Note: This bug was related not just for the language Portuguese Brazil but for all another dictionaries, where
for "&MenuItem" and "MenuItem" are used "&LocalMenuItem1" and "LocalMenuItem2" instead of "&LocalMenuItem" and "LocalMenuItem"
2022-07-12 14:57:11 +02:00
YuSanka
1afc6fb57c
Fix for #8459 - Tooltip on "Retract amount before wipe" setting for retractions
2022-07-12 14:17:37 +02:00
Lukáš Hejl
7860cf8811
Follow-up to e86463a369: Forgot to remove useless asserts.
2022-07-12 13:52:02 +02:00
Lukáš Hejl
e86463a369
Fix of #8463 - Crash in SkeletalTrapezoidation::computePointCellRange() when a cell point didn't fit into Vec2i64 because it was too far away.
2022-07-12 13:36:26 +02:00
Lukas Matena
f41d72d656
Fixed empty 'G1' lines generated by the wipe tower:
...
They are not nice and trigger assertions in CoolingBuffer
2022-07-12 10:59:24 +02:00
Lukáš Hejl
d02a0ec1b2
Fix of #8447 - Zero spacing when Clipper Z-coordinate (line width) equaled zero because the resulting path after clipping had vertices from a clipping polygon (which has Z-coordinate equal to zero).
2022-07-11 11:31:59 +02:00
Lukáš Hejl
38ca763c36
Fix of #8437 - Very tiny unprintable polygons caused InfillFailedException in the lightning infill.
2022-07-11 10:50:01 +02:00
Lukas Matena
c7640bb650
Update year in the copyright notice
2022-07-08 16:37:06 +02:00
Lukas Matena
2e8721d86b
Merge branch 'lm_portuguese' into master_250
2022-07-07 15:54:46 +02:00
YuSanka
3bab1543dc
localization: Updated pt_BR/PrusaSlicer.mo
2022-07-07 15:53:38 +02:00
Lukas Matena
7bfb161474
Fixed typos in pt_BR translation
2022-07-07 15:42:38 +02:00
Valter F.C
acfc43986b
Updated pt_BR translation ( #8449 )
2022-07-07 15:42:38 +02:00
