3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
19,568 Commits 1 Branch 1 Tag 249 MiB
7e77048593
Commit Graph

483 Commits

Author SHA1 Message Date
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
1fb57e439e Defined the +-* operators on Pointf. 
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
 2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66 Unified the creation of paths of debugging output files 
pointing to a predefined output directory.
 2016-10-21 10:18:01 +02:00
bubnikv
9e4edcd8ec Enabled the C++ fillers for all infills, not just the supports. 
Made sure the C++ fillers are instantiated at the worker threads,
where there are being released.
Extended the FillRectilinear2 to calculate the contour / line intersection
with exact arithmetics, improved robustness and added error handling
and error reporting, if the contours to be filled are not correct.
 2016-10-20 17:44:46 +02:00
bubnikv
7d7f093120 C++ supports sketched, but not finalized yet. Slic3r is still using 
the old Perl supports, but this time with the C++ fillers.
 2016-10-16 16:30:56 +02:00
bubnikv
5268574ade Made the sheath around the base support configurable. Without the sheath 
it is easier to remove the support, but the support is more fragile.
 2016-10-04 14:38:13 +02:00
bubnikv
5bb37ad2c4 A new feature "support_material_buildplate_only" implemented. 
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
 2016-10-04 13:54:10 +02:00
bubnikv
b7af7276c9 Instantiate the new C++ filler. It will be used for the supports first. 2016-10-03 16:59:00 +02:00
bubnikv
403329db49 Misc bugfixes. 2016-09-26 13:58:47 +02:00
bubnikv
790b640521 Visualization of fill surfaces. 2016-09-26 13:56:24 +02:00
bubnikv
15c1edd552 Configurable volumetric extrusion rate slope. 2016-09-13 15:02:28 +02:00
bubnikv
b2a6f43923 Documented perl modules. 2016-09-13 11:24:55 +02:00
bubnikv
f518e0675c Initial commit of the new Pressure Equalizer, the EdgeGrid 
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
 2016-09-12 16:25:15 +02:00
bubnikv
9a83d4e8d5 Reverted some now unnecessary changes. Reverted the infill to the original perl implementation. 2016-09-12 13:26:17 +02:00
bubnikv
9fcc8fe9ae Meged with release_candidate_1_3 2016-09-12 11:29:39 +02:00
bubnikv
ca98e2655a New command line option: --dont-arrange 
Don't arrange the objects on the build plate. The model coordinates
define the absolute positions on the build plate.
The option --print-center will be ignored.

Also there is a fix in the command line invocation of --duplicate-grid
so it will run, but still there is something broken there and the results
are not correct.
 2016-09-05 11:32:58 +02:00
Vojtech Bubnik
7649a1df41 Merge branch 'master' of https://github.com/alexrj/Slic3r into release_candidate_1_3 2016-06-03 17:45:05 +02:00
bubnikv
bb9c3dd9ce Fix of git #3293: More efficient GCode export 
This fixes two problems of repeatedly copying data from the C++ layer
to perl, by factoring the copying out of an inner loop.
 2016-06-01 20:58:05 +02:00
Joseph Lenox
f2e8c6f3bd Merge pull request #3262 from hyperair/fix-autospeed-F0-moves 
Don't use equality comparisons for floats
 2016-05-18 22:07:34 -05:00
bubnikv
3a0172888a Adapted to the new infills. 2016-04-15 17:54:47 +02:00
bubnikv
7da68c91a5 Vojtech likes to use Sublime on Windows to get the wheels rolling. 2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
4fad87e438 Fixed float comparison in combine_infill 2016-03-13 12:24:03 +01:00
Chow Loong Jin
5f8eea9adf Don't use equality comparisons for floats 
This fixes an issue where F0 moves arise from 0-width (or 0 layer
height?) support material segments when using autospeed.

Fixes: #3261
 2016-03-08 08:28:30 +08:00
Alessandro Ranellucci
a32937cef2 Refactoring: new Layer::make_fill() method 2016-02-20 20:51:07 +01:00
Alessandro Ranellucci
1a286fc906 Fixes and improvements to MotionPlanner, much smarter now 2015-12-21 14:46:35 +01:00
Alessandro Ranellucci
9dc0514844 Use bridge flow and speed for solid_infill_every_layers 2015-12-19 12:48:48 +01:00
Alessandro Ranellucci
3c862836f2 Refactored the Config XS bindings 2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
37ecc61d06 Two fixes for --debug 2015-11-08 09:12:59 +01:00
Alessandro Ranellucci
9f9b5afedb Merge branch 'master' into sender 2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
198dc7d3bd When background processing fails because of an error, display it in an explicit dialog 2015-11-04 19:28:25 +01:00
Alessandro Ranellucci
a25757a66d Fixed regression causing empty prints to hang. #3107 2015-11-04 19:20:34 +01:00
Alessandro Ranellucci
9b21ac877a Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r.pm
	xs/MANIFEST
	xs/src/libslic3r/PrintConfig.hpp
 2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
2811af349a Added a new grid infill pattern 2015-11-01 19:03:11 +01:00
Alessandro Ranellucci
9fcec10737 Finished porting LayerRegion to C++ 2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
440af2c81c Bugfix: bridge anchors were shortened under rare circumstances 2015-07-03 23:38:41 +02:00
Alessandro Ranellucci
3e739b87da Finished porting Slic3r::GCode to XS (speed boost!) 2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
fbd640fdc5 Ported GCode::extrude_path() to XS (speed boost!) 2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
801f629fdc Ported Slic3r::GCode storage to XS 2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7 Ported Slic3r::GCode::OozePrevention storage to XS 2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
bf9cd1b8e6 Ported Slic3r::GCode::AvoidCrossingPerimeters to XS 2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
580d28d071 Finished porting PlaceholderParser to XS 2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
52d3a047a0 One more raft issue causing extra layers. #2723 2015-06-03 09:39:10 +02:00
Alessandro Ranellucci
6018dafc46 Removed debugging statement 2015-06-02 20:03:57 +02:00
Alessandro Ranellucci
5ce4d8cfb0 Bugfix: extra thin layers added to raft. #2723 2015-06-02 19:58:36 +02:00
Alessandro Ranellucci
ee66392e11 Fix numerical issues causing incomplete raft under certain circumstances. Includes a minor refactoring of raft layer logic. #2723 2015-06-02 19:44:29 +02:00
Alessandro Ranellucci
8613e174e7 Fix error in autospeed. #2810 2015-06-02 11:48:56 +02:00
Alessandro Ranellucci
1875825f45 Minor fix to previous commit 2015-05-31 22:09:58 +02:00
Alessandro Ranellucci
7f70da97b4 New experimental autospeed feature. #2810 2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
13b7316807 Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r/GUI/MainFrame.pm
 2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
f010354201 Bugfix: skirt was not exported to G-code when raft_layers > 0. #2843 2015-05-24 16:28:04 +02:00
Alessandro Ranellucci
73e32dfe5d Use unique continuous numbering for layer numbers in case of support material layers. #2634 2015-05-03 20:18:34 +02:00
Alessandro Ranellucci
1f8ef2a63c Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761 2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
92b980b10e Bugfix: superfluous and harmful travel moves between objects when using sequential printing with Avoid crossing perimeters. #2691 2015-03-23 21:38:57 +01:00
Alessandro Ranellucci
13b63d06ed Use thick raft layers as we do for support material layers. #2723 2015-03-09 20:00:55 +01:00
Alessandro Ranellucci
8654537e55 Use support material layer height for raft layer instead of object layer height. #2723 2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5 Limit first object layer height correctly when using a larger support material extruder. #2722 2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
d2172b4383 Merge branch 'master' into sender 2015-03-06 22:15:43 +01:00
Alessandro Ranellucci
c2009af1c6 Remove ;_WIPE marks in G-code which were left between objects in sequential printing 2015-03-06 10:25:31 +01:00
Alessandro Ranellucci
722e94513c Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled 2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
a3b843b24e Bugfix: temperature was not set correctly when using sequential printing. Includes regression test. #2702 2015-03-02 23:56:38 +01:00
Alessandro Ranellucci
bb3feedc31 Bugfix: too many skirt layers were printed when using tall skirts and support material. #2695 2015-02-27 19:59:43 +01:00
Alessandro Ranellucci
70ace8c76f Bugfix: use proper spacing for first support layer instead of trying to align it to upper layers. #2662 2015-02-27 18:43:15 +01:00
Alessandro Ranellucci
45c91b2ae9 Don't trigger extra perimeters when less than 30% of the upper loops would benefit from it. #2664. Also fixes #2610 2015-02-24 00:34:43 +01:00
Alessandro Ranellucci
e88cf466fe A couple notes about infill_only_where_needed 2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816 Better and more robust implementation of infill_only_where_needed 2015-02-23 00:44:51 +01:00
Chow Loong Jin
073681a50a Get first_layer_extrusion_width from PrintConfig instead of PrintObjectConfig 
This fixes an issue where the support material doesn't honour a custom first
layer extrusion width.

Fixes: #2662
 2015-02-17 13:59:46 +08:00
Alessandro Ranellucci
c0f453f83e Simpler and more robust implementation of extra perimeters. #2395 2015-02-15 21:58:14 +01:00
Alessandro Ranellucci
ba6ae12635 Change end_program() to postamble() 2015-02-15 17:09:17 +01:00
Alessandro Ranellucci
1180a6d83f Merge pull request #2508 from strahlex/machinekit-gcode 
added support Machinekit flavour GCode
 2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
6eb1fa36ed Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656 2015-02-14 12:47:33 +01:00
Alexander Rössler
cc83e9f06d using end_program() function in GCode output 2015-02-07 12:37:00 +01:00
Alessandro Ranellucci
3ae6f2630e Merge branch 'master' into sender 
Conflicts:
	Build.PL
 2015-02-01 14:07:32 +01:00
Alessandro Ranellucci
059b00a829 New --before-layer-change option and new layer_z placeholder. #2602 2015-01-30 20:08:00 +01:00
Alessandro Ranellucci
8605969dc5 Don't output slic3r:z attribute in SVG for raft layers 2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
fe4f79ba90 Fixed regression causing random loss of infill because of corrupt thin polygons returned by Clipper. #2539 2015-01-30 10:12:31 +01:00
Alessandro Ranellucci
1d204af6f4 Fixed regression causing rectilinear infill to be misaligned across layers. #2566 2015-01-28 19:49:56 +01:00
Alessandro Ranellucci
229039d3b8 Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103 2015-01-19 15:31:12 +01:00
Alessandro Ranellucci
7b980c1dc9 New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703 2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
ba4325411b Bugfix: the downwards move in sequential printing was performed in the wrong spot. #2524 2015-01-18 22:08:43 +01:00
Alessandro Ranellucci
9f0283f808 Minor issue when dealing with files with empty layers at bottom. #2553 2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
bf02062a67 Bugfix: random but frequent crashes after recent perimeter code refactoring 2015-01-14 22:55:11 +01:00
Alessandro Ranellucci
04aa240265 Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way) 2015-01-13 20:55:20 +01:00
Alessandro Ranellucci
9ec7b43ca1 Merge branch 'master' into sender 
Conflicts:
	lib/Slic3r/GUI/Tab.pm
 2015-01-08 22:47:43 +01:00
Alessandro Ranellucci
406d045ced The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253 2015-01-08 15:22:13 +01:00
Alessandro Ranellucci
f0de57cbe4 Minor cleanup of the init_external_mp() call 2015-01-06 15:04:09 +01:00
Alessandro Ranellucci
2562070232 Refactored the travel/retract/avoid_crossing_perimeters logic. Several edge cases are now handled correctly. #2498 2015-01-06 14:52:03 +01:00
Alessandro Ranellucci
0f7933c4f9 Bugfix: pressure regulation accumulated too much retraction and didn't discharge at the end of print. Includes regression test. #2470 2015-01-06 00:35:39 +01:00
Alessandro Ranellucci
2c0d216c1a More work on print controller 2015-01-03 23:25:55 +01:00
Alessandro Ranellucci
d38503bf44 Bugfix: downwards interface detection might cause a crash 2014-12-29 14:29:21 +01:00
Alessandro Ranellucci
e8dc981774 Fixes to Ooze Prevention 2014-12-29 00:51:27 +01:00
Alessandro Ranellucci
4848cb7606 Ported PrintObject::bridge_over_infill() to XS 2014-12-24 10:20:55 +01:00
Alessandro Ranellucci
5d3cd792eb Make infill_only_where_needed idempotent. #2198 2014-12-24 01:29:36 +01:00
Alessandro Ranellucci
af446dc7d4 Apply contact distance to first support layer above object's top surfaces too. #1939 2014-12-23 22:18:43 +01:00
Alessandro Ranellucci
473802ce8c Use support material interface extruder for layers above object's top surfaces too. #1939 2014-12-23 01:04:25 +01:00
Alessandro Ranellucci
795c85d30e Apply a true double-ended nearest-neightbor search to thin fills in order to minimize travel moves between them. #2213 2014-12-20 22:40:43 +01:00
Alessandro Ranellucci
c00061678b Use perimeter extruder for brim. #618 2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618 2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
d9cffeca4a Bugfix: adjust skirt flow according to each layer's height. #2307 2014-12-16 18:55:16 +01:00
Alessandro Ranellucci
99deffef62 Bugfix: use the external motion planner when extruding skirt and brim. #2412 2014-12-16 18:13:38 +01:00
Alessandro Ranellucci
e9166a8fe6 Use a semaphore to synchronize threads instead of blocking with join(). Lock threads array in order to ensure all of them are signalled. #2394 2014-12-13 15:01:53 +01:00