3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,517 Commits 1 Branch 1 Tag 249 MiB
843a700e96
Commit Graph

1305 Commits

Author SHA1 Message Date
Alessandro Ranellucci
dac168eff0 Do each island completely if avoid_crossing_perimeters is enabled. #278 2013-03-10 16:09:03 +01:00
Alessandro Ranellucci
f10a4787b2 Fix layer ordering when printing objects with different layer heights 2013-03-10 15:36:52 +01:00
Alessandro Ranellucci
f670acb4b1 Slice a single object with multiple layer heights. :-) 2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
d1acc511b3 Refactor ObjectDialog into a tab panel 2013-03-10 12:46:54 +01:00
Alessandro Ranellucci
6a0ba97f0e Move ObjectDialog to a separate file 2013-03-10 12:33:10 +01:00
Alessandro Ranellucci
d2152a53a0 Missing tooltip for extra perimeters 2013-03-10 12:30:43 +01:00
Alessandro Ranellucci
17cbca5e06 Factor out layer height in support material generation 2013-03-10 12:22:40 +01:00
Alessandro Ranellucci
2ab5fa9c72 Factor out layer height from combine_infill() 2013-03-10 12:08:18 +01:00
Alessandro Ranellucci
2275de9f0d Factored out the layer height logic 2013-03-10 11:37:16 +01:00
Alessandro Ranellucci
e9c7460c11 New --bridge-acceleration option 2013-03-09 20:31:09 +01:00
Alessandro Ranellucci
2acda9973e Don't apply acceleration settings to travel moves 2013-03-09 20:28:03 +01:00
Alessandro Ranellucci
b7b89ff7f2 Bugfix: *-acceleration options didn't work in CLI 2013-03-09 20:21:05 +01:00
Alessandro Ranellucci
460e169c67 New option to disable retraction on layer change 2013-03-09 20:05:43 +01:00
Alessandro Ranellucci
e71bf48463 Add a command to lift nozzle in default start G-code 2013-03-09 19:51:09 +01:00
Alessandro Ranellucci
d50e0af548 Make sure the inwards move after last perimeter loop doesn't exceed object boundary 2013-03-09 17:15:45 +01:00
Alessandro Ranellucci
caa79583ff Tiny optimization 2013-03-09 17:08:17 +01:00
Alessandro Ranellucci
fa41e15c68 Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035 2013-03-09 17:07:11 +01:00
Alessandro Ranellucci
a2702082b2 Merge pull request #962 from scottp/issue_885b 
Add defaults into Tooltips from #885
 2013-03-09 07:48:20 -08:00
Alessandro Ranellucci
9247b3e9f4 New --no-plater and --gui-mode options. #604 2013-03-09 16:43:09 +01:00
Alessandro Ranellucci
af50272b3b Refactor simple mode definitions to dedicated SimpleTab classes 2013-03-09 16:27:18 +01:00
Alessandro Ranellucci
5477d66902 Advertise the expert mode in simple mode 2013-03-09 14:55:07 +01:00
Alessandro Ranellucci
46f35e39f6 Some more tweaks 2013-03-08 23:34:57 +01:00
Alessandro Ranellucci
0748e088a0 Reorder options in simple mode 2013-03-08 23:07:14 +01:00
Alessandro Ranellucci
84f4f098ca Fix cooling and load in simple-mode. #1001 2013-03-08 22:58:28 +01:00
Alessandro Ranellucci
b901e1f6c8 Merge branch 'master' into simple-mode 2013-03-08 22:28:13 +01:00
Alessandro Ranellucci
4fc435f0fd Bugfix: retract speed was applied to travel 2013-03-08 17:52:33 +01:00
Alessandro Ranellucci
f494335f77 Bugfix: not all the calls to travel_to() were updated 2013-03-08 13:50:50 +01:00
Alessandro Ranellucci
2f192bddca Make tests happy 2013-03-07 16:24:25 +01:00
Alessandro Ranellucci
97e864699e New top-infill-extrusion-width option 2013-03-07 16:00:58 +01:00
Alessandro Ranellucci
36d24ccb0b Infill refactoring and cleanup complete 2013-03-07 15:47:32 +01:00
Alessandro Ranellucci
d928f005e6 Some incomplete work for cleaner infill logic 2013-03-05 20:03:46 +01:00
Alessandro Ranellucci
a9df56670f Bugfix: internal-bridge regions were not touching perimeters 2013-03-05 19:33:06 +01:00
Alessandro Ranellucci
37810f777f Make only_retract_when_crossing_perimeters work with avoid_crossing_perimeters 2013-03-05 17:30:27 +01:00
Alessandro Ranellucci
72613ae2b4 Enable only_retract_when_crossing_perimeters by default 2013-03-05 15:01:45 +01:00
Alessandro Ranellucci
70092a9cf5 Apply only_retract_when_crossing_perimeters to all infills 2013-03-04 23:37:58 +01:00
Mike Sheldrake
28467b68e0 typo - fix wrong bridge direction #621 
fixes two out of three reported in #621 (but not the first one)
likely the same issue in #706 and #1003
 2013-02-27 15:16:07 -08:00
Alessandro Ranellucci
a6243124a9 Merge pull request #984 from giseburt/origin_master 
Fix for Replicator 1 not finishing builds.
 2013-02-27 02:37:45 -08:00
Alessandro Ranellucci
fafad0fd81 Code for memory usage statistics 2013-02-27 11:26:52 +01:00
Alessandro Ranellucci
919d1131f8 Use nearest-neighbor search for internal perimeters too. #1025 2013-02-27 11:04:14 +01:00
Alessandro Ranellucci
c3d90a1ff8 Rename $layer to $layerm in Slic3r::Fill too for consistency 2013-02-27 10:44:42 +01:00
Alessandro Ranellucci
a9090688f9 Refactor bridge flow to Slic3r::Flow::Bridge class 2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
d00c2882c4 Remove debug line slipped into last commit 2013-02-27 10:30:05 +01:00
Alessandro Ranellucci
bf9fe1b505 Bugfix: internal bridge surfaces were incorrectly merged with other internal solid surfaces, causing suboptimal results 2013-02-27 01:30:32 +01:00
Alessandro Ranellucci
8ce7b13db5 Fixed regression in is_printable() - needs unit test 2013-02-26 20:54:40 +01:00
Alessandro Ranellucci
37be4f7319 Some cleanup for detect_surfaces_type() 2013-02-26 20:52:13 +01:00
Alessandro Ranellucci
f4e8cdbf36 Better logic for extra perimeters 2013-02-26 20:00:05 +01:00
Alessandro Ranellucci
038737abe6 Bugfix: minimum flow for low layer heights was still too low 2013-02-26 14:15:05 +01:00
Alessandro Ranellucci
7412d4a687 Bugfix: manifoldness error triggered with multi-volume AMF files. #1019 2013-02-24 18:17:08 +01:00
Alessandro Ranellucci
bd76e7677c Adjust extra perimeters 2013-02-24 17:04:19 +01:00
Alessandro Ranellucci
c3dde74776 Fix brim and extra perimeters after recent changes to ->slices 2013-02-24 16:40:14 +01:00
Alessandro Ranellucci
de0c2febd9 Remove useless lines 2013-02-23 23:50:46 +01:00
Alessandro Ranellucci
08a72c0824 Use bridge math for the first solid infill layer above sparse infill. #240 2013-02-23 21:39:13 +01:00
Alessandro Ranellucci
3b1e921171 Slight changes to the defaults 2013-02-23 19:14:41 +01:00
Alessandro Ranellucci
0634437364 Keep the full geometries in $layer->slices, including thin walls 2013-02-23 18:21:29 +01:00
Alessandro Ranellucci
504962712b Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013 2013-02-23 17:40:38 +01:00
Alessandro Ranellucci
3eedd4bbed Fixed regression in support material after recent flow refactoring. #1012 2013-02-23 16:08:29 +01:00
Alessandro Ranellucci
72df796185 Bugfix: failure in launching on Windows with non-ASCII characters in username. #1011 2013-02-22 18:40:00 +01:00
Alessandro Ranellucci
28638019ae Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994 2013-02-22 18:23:23 +01:00
Alessandro Ranellucci
bec2371604 Fix regression introduced in 91bcfc8a74 2013-02-22 16:56:43 +01:00
Alessandro Ranellucci
5eade0f9e1 Don't validate the number of layers for infill combination, just limit it automatically. #993 2013-02-22 16:24:24 +01:00
Alessandro Ranellucci
91bcfc8a74 Remove $Slic3r::flow and $Slic3r::first_layer_flow 2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
b9c84490b8 Get rid of most calls to $Slic3r::flow 2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
6dc62d3cf2 Disable extra perimeters if fill density is zero as they wouldn't be supported by anything and would just float inside the object. infill_only_where_needed should be the method of choice for hollow objects 2013-02-19 12:37:26 +01:00
Mike Sheldrake
c2f04f2861 avoid overlap of single layer and multilayer fill 
A single-layer rectilinear or honeycomb fill under a low slope
wall/ceiling or extra perimeter will stick out from under the
overhang, because those fills get extended beyond their fill_surface
boundaries to purposely overlap perimeters. This causes interference
with multil-layer fills. This commit clips the single layer fill
boundaries a bit more where they interface with multi-layer fill
boundaries, to avoid overlap.
 2013-02-18 07:26:19 -08:00
Mike Sheldrake
9a86edc70c account for extrusion width when clearing layers for combined infill 
Otherwise you get extraneous fill up against sloped walls in regions
of layers that should not have fill, like in #834.
 2013-02-16 07:53:47 -08:00
Alessandro Ranellucci
c9b506fa02 New simpler and more robust implementation of infill every 'n' layers 2013-02-10 12:40:43 +01:00
Alessandro Ranellucci
cac79c0575 New option to only infill where strictly needed for supporting ceilings 2013-02-09 23:36:32 +01:00
Alessandro Ranellucci
cf8cfc1380 Bugfix: angle threshold was considered even when enforcing support 2013-02-09 21:49:00 +01:00
Robert Giseburt
6c12bd32ad Fix for Replicator 1 not finishing builds. 
If the progress reaches 100% before last layer, the firmware erroneously stops reading the file.
 2013-02-06 22:32:37 -06:00
Alessandro Ranellucci
26a3cd5542 Refactor chained_path(), add chained_path_items() and chained_path_points() 2013-02-06 12:03:53 +01:00
Alessandro Ranellucci
e593a30fc7 Skip support material for one-layer objects 2013-02-06 10:40:08 +01:00
Alessandro Ranellucci
4f91bed904 Optimize cycling in get_layer_range() 2013-02-05 21:59:18 +01:00
Alessandro Ranellucci
73a661e6c1 shortest_path() in MotionPlanner was actually correctly named shortest_path() 2013-02-05 19:41:56 +01:00
Alessandro Ranellucci
090e3b1fe3 Rename shortest_path to chained_path, which reflects its algorithm more correctly 2013-02-05 17:27:45 +01:00
Alessandro Ranellucci
11637d527a Bugfix: avoid-crossing-perimeters was failing on layers only containing single walls. #978 2013-02-04 19:33:30 +01:00
Alessandro Ranellucci
8efe46e58d New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint 2013-02-04 15:48:57 +01:00
Alessandro Ranellucci
c8100ed099 Disable randomize starting points by default 2013-02-04 15:05:56 +01:00
Alessandro Ranellucci
7d08796b0a Remove sporadic duplicate useless lines. #772 2013-02-04 14:27:23 +01:00
Alessandro Ranellucci
9222526e03 Customizable number of interface layers for support material and raft 2013-02-03 17:23:50 +01:00
Alessandro Ranellucci
acada05068 Merge branch 'raft' 2013-02-02 16:17:05 +01:00
Alessandro Ranellucci
c7b4d99d7e Generate raft automatically even when support material is disabled 2013-02-02 16:16:43 +01:00
Alessandro Ranellucci
02c0f3658f Use 50% density for support base flange 2013-02-02 15:37:09 +01:00
Alessandro Ranellucci
d3727a1699 Add ability to have cross-hatched rectilinear support material. #509 2013-02-02 00:14:45 +01:00
Alessandro Ranellucci
547dfb857d Workaround for Boost clipping not being idempotent and causing lack of support material 2013-02-01 23:45:46 +01:00
Alessandro Ranellucci
eae1e7adc2 Make a solid base below support material on first layer 2013-02-01 22:13:12 +01:00
Alessandro Ranellucci
1de0169910 Multithreaded perimeter generation. #154 2013-01-31 15:44:55 +01:00
Scott Penrose
9d086f027a Add defaults into Tooltips from #885 2013-01-30 09:53:22 +11:00
Alessandro Ranellucci
177f1a9bf0 New raft_layers option. #123 2013-01-28 14:12:01 +01:00
Alessandro Ranellucci
a016a06fa6 Merge branch 'avoid-crossing-perimeters' 
Conflicts:
	lib/Slic3r/GCode.pm
 2013-01-28 10:43:58 +01:00
Alessandro Ranellucci
e8cb1f4528 Slight addition to avoid_crossing_perimeters tooltip 2013-01-28 10:42:24 +01:00
Alessandro Ranellucci
2963e54d21 Use the faster polygon_multi_linestring_intersection() 2013-01-28 00:32:19 +01:00
Alessandro Ranellucci
ae201c8f41 Optimization: avoid calculating square roots if not needed 2013-01-28 00:18:55 +01:00
Alessandro Ranellucci
6cb891f2db Use Boost::Geometry::Utils for Douglas-Peucker 2013-01-28 00:09:19 +01:00
Alessandro Ranellucci
4c8c725eec Add a wkt() method to ExPolygon 2013-01-28 00:02:34 +01:00
Alessandro Ranellucci
ddaeaa7591 Fix last_pos shifting and add unit test 2013-01-27 13:08:13 +01:00
Alessandro Ranellucci
50526dea5a Fix last_pos shifting and add unit test 2013-01-27 13:06:45 +01:00
Alessandro Ranellucci
ad48fdc7f9 Fix external motionplanner too 2013-01-27 12:48:16 +01:00
Alessandro Ranellucci
f1230312e3 Fixes for merge issues 2013-01-26 23:55:47 +01:00
Alessandro Ranellucci
61b164b539 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
 2013-01-26 21:45:17 +01:00
Alessandro Ranellucci
4c62c1b570 Support .gco extension too. #957 2013-01-26 21:40:20 +01:00