circular, convex, concave) and performs efficient collision detection agains these build
volumes. As of now, collision detection is performed against a convex
hull of a concave build volume for efficency.
GCodeProcessor::Result renamed out of GCodeProcessor to GCodeProcessorResult,
so it could be forward declared.
Plater newly exports BuildVolume, not Bed3D. Bed3D is a rendering class,
while BuildVolume is a purely geometric class.
Reduced usage of global wxGetApp, the Bed3D is passed as a parameter
to View3D/Preview/GLCanvas.
Convex hull code was extracted from Geometry.cpp/hpp to Geometry/ConvexHulll.cpp,hpp.
New test inside_convex_polygon().
New efficent point inside polygon test: Decompose convex hull
to bottom / top parts and use the decomposition to detect point inside
a convex polygon in O(log n). decompose_convex_polygon_top_bottom(),
inside_convex_polygon().
New Circle constructing functions: circle_ransac() and circle_taubin_newton().
New polygon_is_convex() test with unit tests.
did not change compared to the preceding value creating empty "G1" lines.
The empty "G1" lines are now removed.
Improves Features fail with extra G1 moves when above a certain layer height and Detect Thin Walls is enabled #5176
Improves Thin wall detection causes miniature loops to be added, and emits empty G1 commands #3058
for offset2() with clear meaning.
New ClipperUtils functions: expand(), shrink() as an alternative
for offset() with clear meaning.
All offset values for the new functions are positive.
Various offsetting ClipperUtils (offset, offset2, offset2_ex) working
over Polygons were marked as unsafe, sometimes producing invalid output
if called for more than one polygon. These functions were reworked
to offset polygons one by one. The new functions working over Polygons
shall work the same way as the old safe ones working over ExPolygons,
but working with Polygons shall be computationally more efficient.
Improvements in FDM support generator:
1) For both grid and snug supports: Don't filter out supports for which
the contacts are completely reduced by support / object XY separation.
2) Rounding / merging of supports using the closing radius parameter is
now smoother, it does not produce sharp corners.
3) Snug supports: When calculating support interfaces, expand the projected
support contact areas to produce wider, printable and more stable interfaces.
4) Don't reduce support interfaces for snug supports for steep overhangs,
that would normally not need them. Snug supports often produce very
narrow support interface regions and turning them off makes the support
interfaces disappear.
This is a regression wrt. PrusaSlicer 2.4.0-alpha1 due to the G-code
processing optimization and parallelization.
Related to GCode Viewer changes files modified date in windows #5079
TriangleMesh newly only holds indexed_triangle_set and
TriangleMeshStats. TriangleMeshStats contains an excerpt of stl_stats.
TriangleMeshStats are updated when initializing with indexed_triangle_set.
Admesh triangle mesh fixing is newly only used when loading an STL.
AMF / 3MF / OBJ file formats are already indexed triangle sets, thus
they are no more converted to admesh stl_file format, nor fixed
through admesh repair machinery. When importing AMF / 3MF / OBJ files,
volume is calculated and if negative, all faces are flipped. Also
a bounding box and number of open edges is calculated.
Implemented its_number_of_patches(), its_num_open_edges()
Optimized its_split(), its_is_splittable() using a visitor pattern.
Reworked QHull integration into TriangleMesh:
1) Face normals were not right.
2) Indexed triangle set is newly emitted instead of duplicating
vertices for each face.
Fixed cut_mesh(): Orient the triangulated faces correctly.
WIP to G-code export parallelization through pipelining:
Decoupled CoolingBuffer from GCode / GCodeWriter, ready to be
pipelined on a different thread.
WIP to G-code export parallelization through pipelining:
GCodeProcessor is called during the G-code export,
the G-code is no more reopened and re-read, but it is pipelined
from the G-code generator.
GCodeViewer no more parses G-code just to extract line end positions.
Removed start_mapping_gcode_window(), void stop_mapping_gcode_window(),
they are no more needed.
1) Starting with this commit, configuration block exported into G-code
is delimited by "; prusaslicer_config = begin" and "; prusaslicer_config = end".
These delimiters look like any other key / value configuration pairs
on purpose to be compatible with older PrusaSlicer config parsing from G-code.
2) Config parser from G-code newly searches for "; generated by ..."
comment over the complete G-code, thus it is compatible with various
post processing scripts extending the G-code at the start.
3) Config parser from G-code parses PrusaSlicer version from
the "; generated by PrusaSlicer ...." header and if the G-code was
generated by PrusaSlicer 2.4.0-alpha0 and newer, it expects that
the G-code already contains the "; prusaslicer_config = begin / end"
tags and it relies on these tags to extract configuration.
4) A new simple and robust parser was written for reading project configuration
from 3MF / AMF, while a heuristic parser to read config from G-code located
at the end of the G-code file was used before.
- The optional output_name file might contain the .pp suffix.
- In case the file contains just filename, prepend it with the
output dir. We don't want to save to current workdir.
1) New environment variable SLIC3R_PP_HOST contains one of
"File", "PrusaLink", "Repetier", "SL1Host", "OctoPrint", "FlashAir", "Duet", "AstroBox" ...
2) New environment variable SLIC3R_PP_OUTPUT_NAME contains the name
of the G-code file including path (for SLIC3R_PP_HOST == "File")
or a name of the file after upload to the host (PrusaLink, Octoprint ...)
3) The post-processing script may suggest a new output file name
(likely based on SLIC3R_PP_OUTPUT_NAME) by saving it as a single line
into a new "output name" temp file. The "output name" file name is
created by suffixing the input G-code file name with ".output_name".
Please note that the G-code viewer visualizes G-code before post-processing.
Fixes Broken PostProcessing when script changes out-filename #6042
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
Renamed its_create_neighbors_index() / its_create_neighbors_index_par() to its_face_neighbors() / its_face_neighbors_par().
New variant of its_face_edge_ids() to create edge IDs from face neighbors.
Fixed some incorrect use of _NDEBUG, it should be NDEBUG.
PrintObject::slice_support_volumes() returns newly Polygons, which are cheaper than ExPolygons.
Updated SeamPlacer and SupportMaterial to use regions defined as Polygons, not ExPolygons.
TriangleSelector::get_facets_strict() returning a patch with T-joints retriangulated.
New slice_mesh_slabs() - slicing projections of a triangle patch into top / bottom layers of slices, for MMU top / bottom segmentation.
TriangleMeshSlicer - use 64 mutexes instead of one when scattering sliced triangles into layers. This makes a big difference on modern many core desktop computers.
When applying MM segmented regions to input regions, the split regions are now re-merged with 10x higher positive offset epsilon to avoid creating gaps.
When testing for existence of paint-on supports or seam, use a more efficient has_facets() test, which does not deserialize into the expensive TriangleSelector tree structure.
GLIndexedVertexArray newly uses Eigen::AlignedBox<float, 3> for efficiency instead of our double based BoundingBoxf3.
Improved MMU painting refresh speed by optimizing generation of the vertex buffers.
Refactored MMU segmentation - projection of painted surfaces from top / bottom.
1) Parallelized.
2) Using the new slice_mesh_slabs() instead of projecting one triangle by the other and merging them with Clipper.
from the background slicing thread, that supports cancellation.
The generic mechanism is used for generating thumbnails into G-code and
Fixes Fix deadlock when canceling the slicing while gcode is creating thumbnails #6476
Thanks @supermerill for pointing out the issue.
1) Using boost::preprocessor to reduce code duplicities when defining
new configuration values.
2) Implemented static hash() and operator== on StaticPrintConfig derived
classes to support hash tables of instances thereof.
the code more readable and to highlight where PrintObject::region_volumes
are actually set and consumed.
2) Replaced Slic3r::clamp() with std::clamp(). They differ in the order
of their parameters, thus hopefully no new bugs were introduced.
3) Some refactoring of MultiMaterialSegmentation for efficiency.
When was set use_external_mp_once to true then after first calling the avoid crossing perimeters this flag was reset which cases that on the second call of the avoid crossing perimeters the travel move didn't process as external.
Reworked skirt generator to only generate skirt at non-empty layers
(layers that actually extruder object or support) and to respect minimum
layer height. Skirt generator stops at the first layer where those both
conditions cannot be met.
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
Squashed commit of the following:
commit 4e13a8fe19abcc9aae39a9bc4c7953a743196504
Merge: 6ae766409 6f89da1f3
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 11:19:35 2021 +0100
Merge remote-tracking branch 'remotes/origin/master' into vb_edgegrid_open_lines
commit 6ae76640942269993c942861f0444088843e3fa1
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 11:14:48 2021 +0100
EdgeGrid enhancement to accept both the open and closed lines.
commit 36a5efcd558bd5fd5f46b5f561387a2c73221553
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 10:52:14 2021 +0100
EdgeGrid improvements: Documentation, one bug fix after recent refactoring.
commit 6f89da1f39
Author: tamasmeszaros <meszaros.q@gmail.com>
Date: Thu Feb 4 20:31:50 2021 +0100
Disable libicu for boost-regex
Should have been disabled from the beginning
commit ffc77b1a72a0be9b5622fd33defeebb24bf07b34
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Thu Feb 4 18:40:33 2021 +0100
EdgeGrid: Annotated those methods that do not work with open contours.
commit 8039a645b4bf0c46c99b90a9c34e7189d7442f86
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Thu Feb 4 18:28:21 2021 +0100
Refactoring of EdgeGrid structure to support both closed and open lines.
