bubnikv
acce8dbff6
A workaround of the dreaded Intel HD Graphics driver issue at least
...
on the laptop of @roesel.
fixes https://github.com/prusa3d/Slic3r/issues/672
The Intel HD Graphics hangs on the glFinish() call for some reason
with one particular graphics driver revision. Also the glFinish() call
was superfluous and it only may have had negative effect over the performance.
Both glFinish() and glFlush() were removed for performance reasons
where they were not needed, see
https://www.khronos.org/opengl/wiki/Common_Mistakes
2018-02-22 18:56:37 +01:00
bubnikv
ed46cfa19d
Simplified the code base by requiring wxWidgets >= 3.0
2017-08-03 17:47:18 +02:00
bubnikv
81823fe7df
Reduced the content of Geometry.pm, removed unused Perl subroutines.
...
Reduced the use Slic3r::Geometry and use Slic3r::Geometry::Clipper
clauses to only reference used subroutines.
2017-07-19 10:45:39 +02:00
bubnikv
dabcff1c07
When testing for a key press, rather check for the modifier keys
...
(alt, ctrl) always. Also if a key event is not processed, pass it
for further processing.
2017-06-06 19:14:52 +02:00
bubnikv
ed2ee2f6f3
Merged support_fills with support_interface_fills.
...
When extruding supports, the support is interleaved with interface
if possible (when extruded with the same extruder).
Otherwise the base is extruded first.
2017-04-07 17:37:30 +02:00
bubnikv
e016c4e423
New extrusion class: ExtrusionMultiPath
...
This is similar to an ExtrusionLoop, but it is open.
It may contain multiple chained paths with differing parameters.
This allows one to have a hierarchy of paths, where the ExtrusionEntityCollection
will be chained by the G-code generator, but ExtrusionMultiPath will not.
2017-01-19 13:35:55 +01:00
bubnikv
e15b5f4587
Fix of https://github.com/prusa3d/Slic3r/issues/16
...
Crashes while switching in preview through layers with arrow keys
Also added a check box to visualize a single layer only
in the 3D path view. The check box may be toggled with a 'S' key.
Added shift+U / shift+D buttons in the 3D path view to show a single
layer only.
2016-11-08 17:13:16 +01:00
bubnikv
4c67230436
Documented the purpose of various perl modules.
2016-09-14 11:22:41 +02:00
bubnikv
9fcc8fe9ae
Meged with release_candidate_1_3
2016-09-12 11:29:39 +02:00
bubnikv
ab9e3b718c
Support multi sampled anti-aliasing with wxWidgets 3.0.3.
2016-05-27 23:38:45 +02:00
bubnikv
3ba625da22
Revert incorrect checkins.
2016-04-11 17:34:15 +02:00
bubnikv
7da68c91a5
Vojtech likes to use Sublime on Windows to get the wheels rolling.
2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
c65c9d876e
Bugfix: zooming in empty layers preview (because of disabled background processing) crashed
2015-07-04 15:26:11 +02:00
Alessandro Ranellucci
455a1062ef
Fix minor rendering glitch in 2D toolpaths preview
2015-06-17 00:34:05 +02:00
Alessandro Ranellucci
42ae8347df
Zoom around mouse location in 2D toolpaths preview
2015-05-24 23:29:53 +02:00
Alessandro Ranellucci
36ba2eb5d6
Improved zoom/pan for toolpaths preview
2015-05-17 21:29:57 +02:00
Alessandro Ranellucci
80b169aa75
Pan & zoom for toolpaths preview
2015-05-16 00:33:22 +02:00
Alessandro Ranellucci
25cddfe446
Bugfix: layers view was not resized when inactive. #2608
2015-03-09 15:30:19 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
2f255620c6
Fix toolpath preview after recent change of semantics of LayerRegion::perimeters
2015-01-08 15:41:17 +01:00
Alessandro Ranellucci
4c3fa999f5
Only draw the slices in toolpath preview for the current selected layer
2014-12-25 19:35:51 +01:00
Alessandro Ranellucci
9dd228df01
Enable the GLU tesselator on MSW if we have a recent OpenGL module
2014-12-24 11:49:27 +01:00
Alessandro Ranellucci
ea40c4d1b0
Fixed rendering of multiple interlaced layers in toolpaths preview
2014-12-24 01:34:35 +01:00
Alessandro Ranellucci
faed500520
Refresh slider when reloading print in toolpath preview canvas
2014-12-22 18:56:16 +01:00
Alessandro Ranellucci
38ecce0ce9
Disable the GLU tesselator on MSW
2014-12-17 14:41:58 +01:00
Alessandro Ranellucci
34a49086e5
Added code for potential antialiasing
2014-12-17 14:28:25 +01:00
Alessandro Ranellucci
a34cd24fa1
Overlay object slices in toolpaths preview
2014-12-15 12:42:11 +01:00
Alessandro Ranellucci
baf070a36d
Bugfix: workaround for MSW wxWidgets not drawing the slider
2014-12-12 12:34:40 +01:00
Alessandro Ranellucci
04bcb410a9
Minor GUI improvements to toolpaths preview
2014-12-01 00:10:32 +01:00
Alessandro Ranellucci
98c67007d5
Finished bb103122065cddf8f8ea63f5e4fce954142c4d4c
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
e8f242ee3f
Move toolpaths preview to the plater dialog
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
380dd8adfc
Ported some methods to XS
2014-08-03 18:41:09 +02:00
Alessandro Ranellucci
86bad17abb
Display skirt and brim in toolpaths preview. Also take support material margin into account when sizing the window. #2169
2014-07-24 18:32:07 +02:00
Alessandro Ranellucci
f0a57a83fd
Proper handling of interlaced layers in toolpaths preview
2014-07-04 01:04:07 +02:00
Alessandro Ranellucci
2632b2b30e
Include support material in toolpaths preview
2014-07-04 01:04:07 +02:00
Alessandro Ranellucci
16281cc0c3
Fix toolpaths preview when objects have distinct layer heights
2014-07-04 01:04:07 +02:00
Alessandro Ranellucci
907de1011f
Toolpaths preview
2014-07-03 09:24:19 +02:00
