3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
17,306 Commits 1 Branch 1 Tag 249 MiB
c8ff0de27e
Commit Graph

420 Commits

Author SHA1 Message Date
rtyr
a2a0a86138
Creality 0.0.13 2021-01-29 10:44:35 +01:00
rtyr
31e7a60494
Creality - bumped up version to 0.0.13 2021-01-29 10:43:34 +01:00
rtyr
3009b314c8
Merge pull request #5908 from pmjdebruijn/creality_4 
creality.ini various improvements
 2021-01-28 23:48:36 +01:00
rtyr
0168fc612a
Updated bed_texture for Anycubic Kossel 2021-01-28 23:38:45 +01:00
rtyr
7b3a06fd05
Updated Anycubic Kossel bed models. 2021-01-28 23:35:38 +01:00
rtyr
c9ebc18a10
Added Anycubic Kossel texture 
from https://github.com/prusa3d/PrusaSlicer/pull/5747
 2021-01-28 23:34:43 +01:00
Pascal de Bruijn
1f9fe92720 creality.ini: hide CR-6 SE until next release 2021-01-28 18:14:19 +01:00
Pascal de Bruijn
ba87613454 creality.ini: update start_gcode/end_gcode comments 2021-01-28 18:13:45 +01:00
Pascal de Bruijn
ba6a40bcce creality.ini: add CR-6 SE 2021-01-27 17:42:32 +01:00
Pascal de Bruijn
f2a624007b creality.ini: enable more filaments by default 2021-01-27 17:34:38 +01:00
Pascal de Bruijn
5fa4880eac creality.ini: add comments 2021-01-27 17:15:43 +01:00
Pascal de Bruijn
ed04eb1f20 creality.ini: remove superfluous printer_variant from ENDER3V2 2021-01-27 17:04:13 +01:00
Pascal de Bruijn
93da13b0a3 creality.ini: set slowabl to 120C to match fastabl 2021-01-25 21:06:50 +01:00
Pascal de Bruijn
c27ab57c18 creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE 
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.

this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
 2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae creality.ini: Move print head further up for low prints 
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
 2021-01-25 17:22:13 +01:00
Pascal de Bruijn
78354ee991 creality.ini: reduce prime line in start_gcode 
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode

the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
 2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c creality.ini: universal end_gcode improvement 
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
 2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959 creality.ini: Ender3 V2 naming consistency 2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08 creality.ini: raise Das Filament PLA bed temp 
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.

So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
 2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1 creality.ini: improve nonabl start_gcode 2021-01-23 19:09:29 +01:00
rtyr
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles. 2021-01-08 10:57:41 +01:00
rtyr
250ef23fd5
Updated 0.0.12 description 2021-01-08 09:44:09 +01:00
rtyr
ecb85b2166
Added Ender 3-V2. 
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702.
 2021-01-08 09:42:01 +01:00
rtyr
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A 2021-01-06 20:35:37 +01:00
rtyr
615356b69c
Ender3V2 thumbnail 2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle 
https://github.com/prusa3d/PrusaSlicer/pull/5582
 2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers 2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro 2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10 
Parameter consistency improvements. Enabled conservative elephant foot compensation.
 2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10 2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469 Creality.ini: default to Generic PLA, and move defaults to common printer section 2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777 creality.ini: enable conservative elefant_foot_compensation 
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.

A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.

And I'd prefer to undercompensate as opposed to overcompensate
as a default.
 2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93 Creality.ini: improve parameter consistency 2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version. 2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5 2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6 2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format. 2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm 2020-12-08 11:12:42 +01:00
rtyr
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys. 2020-12-05 11:29:16 +01:00
rtyr
72a64c200b
Anycubic 0.0.5 Updated end g-code. 2020-12-05 11:23:07 +01:00
rtyr
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys 2020-12-05 11:19:53 +01:00
rtyr
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys 2020-12-05 11:14:27 +01:00
rtyr
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2 2020-12-05 10:21:13 +01:00
rtyr
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code. 2020-12-05 10:18:49 +01:00
rtyr
6716416add
Removed redundant line 2020-12-05 09:58:51 +01:00
rtyr
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values. 2020-12-05 09:55:07 +01:00
rtyr
ee088e219e
Creality 0.0.8 2020-12-05 09:53:05 +01:00
rtyr
c4d97d3d9b
bumped up to 0.0.8 2020-12-05 09:51:38 +01:00
Pascal de Bruijn
e3a0a8878a creality.ini: add Extrudr PLA NX2 spool weight 2020-11-29 19:05:02 +01:00
Pascal de Bruijn
0f03b74261 creality.ini: add 3DJAKE ecoPLA spool weight 2020-11-29 12:47:48 +01:00
Pascal de Bruijn
f86dab9f36 creality.ini: slight end_gcode improvements 
gcode order made more similar to prusa mini
 2020-11-29 12:42:08 +01:00
rtyr
6d27b0f5d0
1.2.0-beta0 2020-11-28 10:35:59 +01:00
rtyr
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials 
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
 2020-11-24 09:53:50 +01:00
rtyr
ee20331ead
1.2.0-alpha0 added filament spool weight 2020-11-21 15:42:38 +01:00
rtyr
9023f092ad
Creality 0.0.7 - updated start g-code 2020-11-21 10:24:54 +01:00
rtyr
a2e763d4ca
Bumped up creality bundle version to 0.0.7 2020-11-21 10:22:57 +01:00
Pascal de Bruijn
32345b9e75 creality.ini: make start_gcode robust for absolute_e 2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator 2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands 2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
2558a98636
fix spurious custom setting in Anycubic Predator profile 2020-11-14 12:27:20 +01:00
rtyr
cd2b502c38
Updated Anycubic thumbnails. 2020-11-13 13:08:09 +01:00
rtyr
2df97edcf5
Updated LulzBot thumbnails. 2020-11-12 19:20:23 +01:00
rtyr
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models. 2020-11-12 18:55:42 +01:00
rtyr
0c78573f5c
Version changed to 0.0.6 2020-11-12 18:52:48 +01:00
rtyr
868ffa21d5
Updated BIBO2 thumbnail. Removed "BETA" label. 2020-11-12 18:47:30 +01:00
Pascal de Bruijn
b9da42eb67 creality.ini: raise remaining PLA bed temperatures to 60 
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.

With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.

Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.

https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
 2020-11-12 18:26:45 +01:00
rtyr
aa32f48c9c
Updated creality thumbnails. Removed "BETA" label. 2020-11-10 17:53:49 +01:00
rtyr
cf339c5f8d
Updated thumbnails. Removed "BETA" sign. 2020-11-10 17:26:42 +01:00
rtyr
21a7a606d2
Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support 
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
 2020-11-10 16:02:34 +01:00
rtyr
1799d263b3
Merge pull request #5118 from trilab3d/master-trilab 
Added thumbnails for new TriLAB printers
 2020-11-10 15:59:49 +01:00
Matej Supik
0259c96287 Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108 2020-11-10 12:02:50 +01:00
Pascal de Bruijn
077cc1e5ff creality.ini: Add Devil Design PLA Galaxy (Glitter) 
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament

It even needs a slightly higher bed temp to prevent warping on
sharp corners
 2020-11-09 19:27:02 +01:00
Pascal de Bruijn
9f2d8299b1 creality.ini: disable pause_print_gcode (#4980) 2020-11-09 18:52:01 +01:00
rtyr
b0252ba607
Merge pull request #5114 from pmjdebruijn/creality_head_bed_first 
creality.ini: introduce slow abl variant start_gcode
 2020-11-09 15:38:43 +01:00
Pascal de Bruijn
90f1cb3414 creality.ini: introduce slow abl variant start_gcode 
printers with a large bed are probably more prone to heat induced
bed warping, there we'll split up our abl start_gcode in fast
and slow variants, where printers with a smaller bed like
the Ender-3 will still use the fast variant, printers with
a large bed like the CR-10 will use the slow variant which
heats up the bed before starting the abl procedure.
 2020-11-09 13:48:01 +01:00
rtyr
006630299b
Fixed predator output filaname format, infill overlap 2020-11-09 11:44:00 +01:00
rtyr
f33f55646c
Bumped up version to 0.0.4 2020-11-09 11:43:02 +01:00
rtyr
71593a487f
Merge pull request #5104 from Tillverka3d/master 
Fix predator output filaname format, infill overlap, and retraction length
 2020-11-09 11:39:39 +01:00
Pascal de Bruijn
72bcd29bc7 creality.ini: add filament_colour per vendor 
this essentially associates filament_colour with a vendor

the colour codes were taking from each of the vendors websites
 2020-11-08 19:36:36 +01:00
Pascal de Bruijn
3b63b0eca0 creality.ini: lower Creality PLA temp 
Based on test-dog.gcode on the SD card included with the Enter 3 Pro

M190 S50.000000
M109 S200.000000

I also did a temperature tower test with the sample filament spool included
with my Ender 3 Pro, which I still hadn't opened.

And at all temps 190-215C I've seen fairly poor bridging, with 190C being the
least worst. I still have to test, but it'll likely perform well at 185C.

The semitranslucent white PLA included with my Ender 3 Pro, probably has a
matting agent in it, which explains why it's very flowy, and very similar
in performance to another Matte PLA filament I have, which also exhibits
poor bridging at even moderate temperatures.

For the time being, let's stick with Creality's own sample settings.
 2020-11-08 19:17:24 +01:00
Pascal de Bruijn
1025e01a9d creality.ini: slightly raise temp for Generic PLA 2020-11-08 19:14:17 +01:00
Pascal de Bruijn
39c5a5cc12 creality.ini: Add AzureFilm PLA filament 
Based on temperature tower
 2020-11-08 19:13:12 +01:00
Nicolas North [norðurljósahviða]
f843e1034d
Revert retract_lenght for Predator until further testing 2020-11-08 17:07:42 +01:00
Nicolas North [norðurljósahviða]
3a0b0913e3
Fix retraction lenght for predator 2020-11-07 23:50:59 +01:00
Nicolas North [norðurljósahviða]
c518ec8abd
Fix predator output filaname format and infill overlap 2020-11-07 22:20:01 +01:00
rtyr
e01b3f4759
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. 2020-11-06 10:55:50 +01:00
rtyr
98b7ce405c
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. 
https://github.com/prusa3d/PrusaSlicer/pull/5092
 2020-11-06 10:54:34 +01:00
rtyr
3da92257d2
Anycubic 0.0.3 2020-11-05 10:42:08 +01:00
rtyr
94c54d0538
Bumped up version to 0.0.3 2020-11-05 10:40:35 +01:00
Nicolas North [norðurljósahviða]
69fd5c1074
fix infill_overlap, start_gcode, end_gcode for anycubic predator 2020-11-05 03:24:51 +01:00
rtyr
729304c129
Creality - Prusament PLA temp adjust 2020-11-03 22:15:39 +01:00
Pascal de Bruijn
893475d7ed creality.ini: fix first_layer_bed_temperature for Generic PLA 2020-11-03 19:39:45 +01:00
Pascal de Bruijn
f119bc9872 creality.ini: optimize Generic PLA 
with some exceptions most regular PLAs seem to print well
around 200C, which is most likely due to the limited
effectiveness of the part cooling fan design on most
Creality printers
 2020-11-03 19:32:00 +01:00
Pascal de Bruijn
eb0534b7b5 creality.ini: add 123-3D Jupiter PLA filament 
print temperature based on a temperature tower test

190C seems to produce some inconsistencies
200C seems like the best tradeoff
210C has noticably worse bridging/overhangs

Offical pricing from the vendor is 19.50EUR per 1KG roll
 2020-11-03 19:28:01 +01:00
Pascal de Bruijn
590ea85de5 creality.ini: add 3DJAKE ecoPLA filament 
print temperature based on a temperature tower test

going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 210C

Offical pricing from the vendor is 21.99EUR per 1KG roll
 2020-11-03 17:45:44 +01:00
Pascal de Bruijn
f4203e6509 creality.ini: add Velleman PLA filament 
print temperature based on a temperature tower test

going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 215C

There is no reference pricing from the Belgian vendor,
however 20,99 per 0.75KG roll seems common
 2020-11-03 17:38:01 +01:00
rtyr
51bd0b733e
Added 0.15mm print profile. 2020-11-03 08:35:46 +01:00
rtyr
47b854e0c0
New filament profiles. 
https://github.com/prusa3d/PrusaSlicer/pull/5061
 2020-11-03 08:27:31 +01:00
rtyr
36527cbaf2
Added Ender 5 thumbnail 2020-11-02 21:13:21 +01:00
Pascal de Bruijn
e6f6c59dae creality.ini: fix Ender-5 end_gcode comments 2020-11-02 17:17:28 +01:00
Pascal de Bruijn
9ca5de8bdf creality.ini: end_gcode improvement 2020-11-02 17:12:30 +01:00
Pascal de Bruijn
7b10e467cd creality.ini: add Ender-5 2020-11-02 17:11:26 +01:00
Pascal de Bruijn
925900f235 creality.ini: fix Ender-5 Plus bed_shape 2020-11-02 17:02:24 +01:00
rtyr
e8ec21ea45
Updated new thumbnails 2020-11-01 19:49:41 +01:00
rtyr
803d9af832
Merge pull request #5049 from pmjdebruijn/creality_printers 
creality.ini: add CR-10/20 family and Ender-5 Plus
 2020-11-01 18:41:50 +01:00
rtyr
77b8789a29
New Creality thumbnails 2020-11-01 18:39:20 +01:00
rtyr
05cd599bfb
Delete CR10_thumbnail.png 2020-11-01 18:38:06 +01:00
rtyr
11339a888a
Delete CR10BLTOUCH_thumbnail.png 2020-11-01 18:37:53 +01:00
Pascal de Bruijn
7f330ad9ca creality.ini: fix CR-10 Mini X/Y bed dimension swap 2020-11-01 14:19:58 +01:00
Pascal de Bruijn
4807824d96 creality.ini: add CR-10/20 family and Ender-5 Plus 2020-11-01 13:07:46 +01:00
rtyr
fcc8f6615a
Ender3 bed shape improvement. 
https://github.com/prusa3d/PrusaSlicer/pull/5032
 2020-10-31 23:21:19 +01:00
rtyr
497fc0833c
Removed deprecated keys. 2020-10-31 23:10:59 +01:00
rtyr
1f8695b477
Added CR-10. General improvements. 
Based on https://github.com/prusa3d/PrusaSlicer/pull/5030
 2020-10-31 23:07:32 +01:00
rtyr
07f5aafca9
CR-10 bed model and thumbnails 2020-10-31 22:59:33 +01:00
rtyr
6e4f4f9adf
Merge pull request #5033 from pmjdebruijn/ender2_bed 
creality: ender2 improved bed model
 2020-10-30 16:22:00 +01:00
Pascal de Bruijn
cf8c07bd8a creality: ender2 improved bed model 2020-10-30 13:25:34 +01:00
rtyr
3397dc87a8
Removed deprecated keys 2020-10-29 15:01:48 +01:00
rtyr
26d8cf2bd8
Removed deprecated keys. 2020-10-29 14:56:23 +01:00
rtyr
d053939994
Updated to 1.1.10 2020-10-29 10:04:40 +01:00
rtyr
3502f256fa
Merge pull request #4481 from pmjdebruijn/ender3_bed 
ender3_bed.stl: Ender3 improved bed model
 2020-10-29 00:16:30 +01:00
rtyr
30fb77b8d4
Removed invalid keys from print settings. 2020-10-27 00:50:46 +01:00
rtyr
ba4afc9378
Added Anycubic Predator 2020-10-26 14:27:19 +01:00
rtyr
4fb4a9a188
Added Anycubic Predator 
based on https://github.com/prusa3d/PrusaSlicer/pull/4960
 2020-10-26 14:25:37 +01:00
rtyr
03e09ef8ca
Anycubic Predator thumbnail 2020-10-26 14:23:01 +01:00
Vojtěch Bubník
c59db4e7fe
Merge pull request #4213 from onovy/https 
Use https in config update URLs
 2020-10-17 21:13:43 +02:00
rtyr
570f7b648e
Updated version to 0.0.2 2020-10-16 17:02:01 +02:00
rtyr
8524a71a23
Version changed to 0.0.2. 2020-10-16 17:01:11 +02:00
rtyr
7e6f35047d
Added G92 E0 to before_layer_gcode. 2020-10-16 09:56:56 +02:00
Pascal de Bruijn
4f71bbfff4 creality.ini: remove bed_shape from common printer section 2020-10-14 17:57:54 +02:00
Pascal de Bruijn
3a49eb5a65 creality.ini: fix default_print_profile 2020-10-14 17:56:44 +02:00
Pascal de Bruijn
92f8995e51 creality.ini: fix default_filament_profile 2020-10-14 17:55:39 +02:00
Pascal de Bruijn
298cd61455 creality.ini: partially revert z height for nonbltouch 2020-10-13 17:12:19 +02:00
Pascal de Bruijn
17dcff5374 creality.ini: add model specific notes for ENDER2 2020-10-12 18:18:56 +02:00
Pascal de Bruijn
6e7672940a creality.ini: add PRINTER_HAS_BOWDEN for future use 2020-10-12 18:13:29 +02:00
Pascal de Bruijn
cf3f031107 creality.ini: increase hotend wait for temp z height 2020-10-12 17:36:00 +02:00
Pascal de Bruijn
5dc0994cbc creality.ini: fix printer section case 2020-10-12 17:34:05 +02:00
Pascal de Bruijn
19a2fd1651 creality.ini: add family 2020-10-12 17:31:01 +02:00
Vojtěch Bubník
a38c00ef6b
Merge pull request #4854 from pmjdebruijn/creality_start_gcode 
creality.ini: start_gcode fix
 2020-10-12 09:00:33 +02:00
Pascal de Bruijn
9ea17d022d creality.ini: reduce excessive extrusion of second prime line due to absolute coordinates 2020-10-09 19:15:05 +02:00
Pascal de Bruijn
2a86339d79 creality.ini: remove unused common start_gcode/end_gcode 2020-10-09 19:13:48 +02:00
Pascal de Bruijn
d6af9cfe76 creality.ini: refactor print settings commonalities 2020-10-09 19:07:05 +02:00
Pascal de Bruijn
81e46505cf creality.ini: add 0.10mm and 0.15mm print settings 2020-10-09 18:56:14 +02:00
Vojtech Bubnik
ecff5893d6 Updates of Anycubic and Creality profiles by @rtyr 2020-10-08 10:39:58 +02:00
bubnikv
82b86d2c65 New 3rd party printer profiles, prepared by @rtyr 
Anycubic (5 printers from 3 contributors)
https://github.com/prusa3d/PrusaSlicer/pull/4057
https://github.com/prusa3d/PrusaSlicer/pull/4220
https://github.com/prusa3d/PrusaSlicer/pull/4619
TriLAB
https://github.com/prusa3d/PrusaSlicer-settings/pull/100
Creality
based on https://github.com/prusa3d/PrusaSlicer/pull/4485
https://github.com/prusa3d/PrusaSlicer/pull/4748
 2020-09-29 18:07:18 +02:00
Pascal de Bruijn
7e926e36ea ender3_bed.stl: Ender3 improved bed model 
Simpler bed model, with a modeled front lip, which is a clear visual
indicator which side of the bed is the front of the printer.
 2020-07-05 14:22:52 +02:00
Ondřej Nový
cb73dd2ca6 Use https in config update URLs 
http://files.prusa3d.com/* always redirects to HTTPS so use https scheme
directly.
 2020-05-07 20:37:23 +02:00
Vojtěch Bubník
3d11f216b0
Merge pull request #3910 from photodude/BIBO2-Print-Profile-Corrections 
BIBO2 printer general print profile improvements.
 2020-04-10 07:39:06 +02:00
probonopd
5e134b5f30
Add max_print_height 2020-04-08 17:04:39 +00:00
probonopd
b9c397ccb9
Creality Ender-2 2020-04-06 17:14:53 +00:00
photodude
2ad9a0c995 General print quality improvements. 
After reviewing many test prints, these changes to print speeds and to line widths seem to have a positive improvement on print quality with BIBO2 printers.

Additionally several items were made more consistant especially with the external_perimeter_speed values.
 2020-03-24 19:12:51 -06:00
bubnikv
707bc09be5 Changed PrusaResearch extruder clearance 2020-03-15 09:04:00 +01:00
bubnikv
2e1aef87a1 The import of system profiles was improved to not inherit 
the "renamed_from" field as it is specific to a concrete profile.

Prusa Research system profile was annotated with "renamed_from"
to indicate that the PETG profiles were renamed from PET somewhere
after PrusaSlicer 2.2.1 release.
 2020-03-15 08:38:17 +01:00
bubnikv
f71d3e63f2 Changed location of vendor specific thumbnail images of printers: 
These images are newly stored inside the resources/profiles/VENDOR_NAME/,
they should be named by the printer_model identifier suffixed with
"_thumbnail.png"

All the existing printer thumbnails were moved and renamed,
thumbnails for the 3rd party printers were added, marked as Beta.
 2020-03-12 14:13:08 +01:00
photodude
6744c108b8 BIBO2 configs use the same printer model 
All BIBO2 printer configurations use the same printer model. Lets be consistant
 2020-03-11 16:14:18 -06:00
photodude
e72b5b9937 Improve compatible_printers_condition 
beter restriction for compatible_printers_condition for cases which previously used the printer model
 2020-03-11 16:11:54 -06:00
photodude
c4837cf6aa Add printer notes to Ditto printing options 
Ditto printing options should have their own printer notes as they are specialized use cases.
Add and comment out the bed model and bed texture due to an issue
 2020-03-11 15:53:42 -06:00
bubnikv
bbf212d5f6 Fixes to the BIBO profile. 2020-03-11 18:13:13 +01:00
bubnikv
a4a6ef3c72 BIBO2 profile: 
Removed compatible_printers_condition = printer_family=="BIBO2"
printer_family variable is not supported, though it is a good idea.
Fortunately it was not needed for the BIBO2 printer as of now.
 2020-03-11 16:35:21 +01:00
bubnikv
04d1fc0633 BIBO2 Touch profile updates by @rtyr 2020-03-11 15:29:15 +01:00
photodude
afe8a8bd99 remove "present print" from end gcode. 
Although the "present print" code works, it really seems more like a gimick than a useful tool. removed to simplify end gcode.
 2020-03-09 17:18:12 -06:00
photodude
9f9b139450 Create Draft BIBO2 vendor config bundle 2020-03-09 11:41:21 -06:00
bubnikv
6723b5f3cd Vojtech's adjustments to Lutzbot config, now it installs. 2020-03-07 16:33:03 +01:00
bubnikv
cbf5459f5d Initial Lutzbot printer definition by Mikolas Zuza 2020-03-07 16:31:46 +01:00
bubnikv
192bdffb3f Updated printer profiles, bumped up version to 2.2.0-rc. 2020-02-29 10:53:18 +01:00
bubnikv
a28c373d22 Updated bundled profiles. 2020-02-21 18:43:26 +01:00
bubnikv
76433da64c Printer profiles were updated by @rtyr 2020-02-08 22:11:44 +01:00
bubnikv
d590d5cad8 Created Creality.idx 
bumped up the version number for Creality.ini
 2020-01-30 13:00:26 +01:00
bubnikv
a0e6afcee8 Update of PrusaSlicer.idx to force the users of PrusaSlicer 2.2.0-alpha3 
and newer to update the profiles to 1.1.1-alpha3 and newer,
so they will see the print bed.
 2020-01-23 16:52:24 +01:00
bubnikv
8bf53370c1 Bumped up version number 2.2.0-alpha3, 
so that the updated bundled profiles may require this version
(2.2.0-alpha3) or newer.
This change is needed for the clients to be forced to update
the configurations to see the print bed, as the print bed model and
image are no more hard coded, but they are referenced from
the vendor specific Preset Bundle.
 2020-01-23 16:40:25 +01:00
Enrico Turri
e8d52cfba1 Fixed conflicts after merge with master 2020-01-17 14:16:12 +01:00
YuSanka
536514ff03 Added default filament(resin) in wizard for selected printers 
Added default_materials field to "Vendor".ini
 2020-01-15 09:34:21 +01:00
Enrico Turri
051fcd4e24 Configurable system printers bed textures and models 2020-01-09 10:27:42 +01:00
bubnikv
e2fd540815 Updated PrusaResearch.idx, so our in house customer will get updated profiles. 2019-12-22 13:52:47 +01:00
bubnikv
9128ba766b Bumped up the PrusaSlicer.ini version number, so that our in house 
customers will get an update.
 2019-12-22 11:12:15 +01:00
bubnikv
74d6c23ba8 Updated Prusa3D config - elephant foot compensation 0.2mm 
allowed for all profiles but 0.25mm dmr nozzles.
 2019-12-18 15:30:00 +01:00
YuSanka
85645a1253 Fixed crash on ConfigWizard opening after a language change 
+ updated Creality.ini and PrusaResearch.ini
 2019-12-09 13:02:48 +01:00
YuSanka
ef29b13c5e Updated Creality.ini 2019-12-04 14:11:42 +01:00
bubnikv
75a2e0e3f9 Profiles for PrusaSlicer-2.2.0-alpha0 2019-12-04 11:47:08 +01:00
YuSanka
a3ff1b4282 Added updated profiles INI files 2019-11-28 10:54:29 +01:00
YuSanka
cb395460c4 Implemented aliases for filaments 2019-11-21 13:12:06 +01:00
bubnikv
b2a6a07d72 Make the .gcode and .sl1 thumbnails configurable through printer profile. 2019-11-15 17:33:31 +01:00
YuSanka
840c59cd3d Added new PrusaResearch.ini (with MINI and aliases) 2019-11-15 08:34:55 +01:00
YuSanka
8c22b0cd4f Added MINI and Creality Ender to ConfigWizard 2019-11-14 14:04:02 +01:00
Vojtech Kral
270008a3fd Add material_type config option for SLA materials, use in Wizard 2019-09-17 13:20:06 +02:00
Vojtech Kral
34b3548102 Filaments and materials selection/installation 2019-09-17 13:20:06 +02:00
bubnikv
e0ecd283ef Updated Prusa3D profiles, bumped up the version number. 2019-09-13 15:24:13 +02:00
bubnikv
a48ba21f40 Updated PrusaResearch.idx 2019-09-04 14:56:34 +02:00
bubnikv
a09bb3802b Updated the bundled Prusa Research profiles. 
Bumped up the version number to 2.0.0-rc.
Changed the location of profiles from PrusaSlicer-beta to PrusaSlicer
(that is the location for the released software).
 2019-09-04 12:50:43 +02:00
bubnikv
1096dff0f6 Bumped up the version number to beta2, updated Prusa3D printer profiles. 2019-08-25 09:16:46 +02:00
bubnikv
29a51bc46f Updated bundled Prusa3d profiles 
Bumped up the version to 2.1.0-beta, changed the user configs directory
to PrusaSlicer-beta.
 2019-08-23 16:15:03 +02:00
bubnikv
576643c7ed Bumped up the version to 2.1.0-alpha0. 
Updated the bundled profiles to integrate retract overrides
for PET and FLEX materials.
 2019-08-01 11:53:22 +02:00
bubnikv
bb604242aa Updated the Prusa3D profiles. 2019-07-23 14:04:10 +02:00
bubnikv
f0ac0fbd09 Updated profiles for the final release. 2019-05-20 16:25:51 +02:00
bubnikv
c225644961 Updated PrusaResearch profiles 2019-05-17 16:31:40 +02:00
bubnikv
e58d530afe Bumped up slicer version, updated bundled profiles 2019-05-14 19:06:52 +02:00
bubnikv
a97d99b336 Updated profiles. 2019-05-14 18:16:04 +02:00
Vojtech Kral
6c5bdeadc3 Updating: Add localized links 2019-05-14 13:30:55 +02:00
bubnikv
e3153fc8fe Updated Prusa3D print profiles 2019-03-16 19:13:30 +01:00
Vojtech Kral
0e1e87e0ad Update preset bundle 2019-02-22 17:26:25 +01:00
Vojtech Kral
59300b61c5 Update profiles 2019-02-15 15:38:41 +01:00