3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,163 Commits 1 Branch 1 Tag 249 MiB
ccb49a8439
Commit Graph

1049 Commits

Author SHA1 Message Date
Alessandro Ranellucci
ab7697ec1c New option to force a solid layer every given number of layers. #617 2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639 2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73 Output an error if user tries to use 100% density with a non-solid fill pattern. #691 2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4 Do not call srand for each layer, to get better randomization of starting points. #694 2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd use remove_coinciding_points before convex_hull 
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
 2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916 $parallel_degrees_limit decreased, 3 to 0.1, #704 
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
 2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683 Increase scale factor for Clipper::offset 
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700, #702 and #703. There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
 2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
fd74577eae Fix typo in previous commit 2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
d8c192ae05 Fix fatal error caused by recent refactorings 2012-09-23 18:07:44 +02:00
Alessandro Ranellucci
1f4706f02f [print_preset] and others were erroneously renamed to [print] etc. #675 2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
77625894ff New command to combine multiple STL files into a single multi-material AMF file 2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
bbe0a45b58 Optimization: cache scaled flow width and spacing 2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db Rename materials to regions 2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8 Assign extruders and flows to materials 2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb Fix positioning and other things 2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243 More work (breaks centering and internal surfaces detection) 2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613 Large refactoring to allow processing multimaterial files 2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b Refactoring: move the 'copies' property to each Print::Object 2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
82ac4722d2 Refactoring, new size_3D function 2012-09-22 16:12:54 +02:00
Alessandro Ranellucci
b5672de3ca Refactoring, new bounding_box_3D function 2012-09-22 16:10:24 +02:00
Alessandro Ranellucci
35e449e891 Make new plater compatible with threaded perls 2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
037be34b7b Bugfix: removed fatal error when generating SVG support material in some circumstances. #673 2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
c6c7dd12da Silently ignore threads > 1 on non-threaded perls 2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
27b71d8885 Little regressions after recent merge 2012-09-21 16:08:22 +02:00
Alessandro Ranellucci
392309a369 Little cleanup 2012-09-21 15:58:44 +02:00
Alessandro Ranellucci
46cbdcdc4e Merge branch 'master' into dynamic-flow 2012-09-21 15:36:33 +02:00
Alessandro Ranellucci
f638558167 Preserve position when splitting objects in plater 2012-09-21 15:35:32 +02:00
Alessandro Ranellucci
e40f32995f Finish GUI decoupling 2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
8382eeef0a Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
f659dcf088 Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
757515ba17 New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
4fbb8ffb9d Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
87912cb3b0 Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
f314cedd8f Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
d848e2d4c9 Warn the user when Slic3r is being run under 5.16 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
e89f64e9d3 More unfinished work 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
6adf98edaf Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
37ae2e1e2d Use support material extruder for brim. #653 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
3b38e392ad Consider single walls as external perimeters. #661 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
47c5d410ea Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
152c714b87 Bump version number 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
d7e801fd32 Releasing 0.9.2 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
202bfa91c8 Adjust M-codes for temperature handling for Teacup. #539 2012-09-21 15:04:12 +02:00
Alessandro Ranellucci
94a096f1d2 Support legacy config files not containing first_layer_height #631 2012-09-21 15:04:11 +02:00
Alessandro Ranellucci
1cedb00f20 Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/ExPolygon.pm
 2012-09-12 16:05:06 +02:00
Alessandro Ranellucci
2a51cad0c3 Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-12 15:58:01 +02:00
Alessandro Ranellucci
f4260ae93d Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-12 15:53:24 +02:00
Alessandro Ranellucci
7a5071f66c New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-12 15:29:44 +02:00
Alessandro Ranellucci
e0d5f4e528 Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-12 15:22:43 +02:00
Alessandro Ranellucci
9934f8957f Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-12 15:20:37 +02:00
Alessandro Ranellucci
bb5f00cf0c Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
36796645cb Warn the user when Slic3r is being run under 5.16 2012-09-11 16:02:26 +02:00
Alessandro Ranellucci
628cc52338 Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-06 11:28:24 +02:00
Alessandro Ranellucci
f41a6af343 Use support material extruder for brim. #653 2012-09-06 11:01:44 +02:00
Alessandro Ranellucci
1053947c19 Consider single walls as external perimeters. #661 2012-09-06 10:56:42 +02:00
Alessandro Ranellucci
e0a96c00b3 Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-06 10:44:48 +02:00
Alessandro Ranellucci
8d7b781473 Bump version number 2012-08-31 00:12:13 +02:00
Alessandro Ranellucci
25f647a60c Releasing 0.9.2 2012-08-30 23:15:42 +02:00
Alessandro Ranellucci
5017f17171 Adjust M-codes for temperature handling for Teacup. #539 2012-08-30 23:13:28 +02:00
Alessandro Ranellucci
b37af86bef Support legacy config files not containing first_layer_height #631 2012-08-30 23:04:56 +02:00
Alessandro Ranellucci
191de5d078 Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage) 2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
f29d455319 Refactor the AMF parser so that it popolates a Model object directly. Also read constellations 2012-08-29 18:23:34 +02:00
Alessandro Ranellucci
23f6842bd4 Export plates as AMF constellations 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
f90520ed06 Refactoring: new Slic3r::Model class to represent files 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
9bd1b0f6ba Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637 
This reverts commit 08270022dd.
 2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd Refactoring: initialize all layers at once and avoid duplication of slicing height math 2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
a1a4d97f9f Remove useless subroutines 2012-08-25 20:14:52 +02:00
Alessandro Ranellucci
a1ac866b84 Refactoring: turn x_length and y_length in size 2012-08-25 20:14:01 +02:00
Alessandro Ranellucci
896641cb7e Fixed regression causing some bridges not to be detected correctly. #629 2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
fe6c8fabdb Make Josef Prusa and Petr Ledvinka happy while we figure out how to handle localized Windows file paths 2012-08-25 19:06:14 +02:00
Alessandro Ranellucci
873ea93832 Fix missing module inclusion preventing the recently introduced option from working 2012-08-25 17:18:12 +02:00
Alessandro Ranellucci
0c22250740 New option to disable retraction when moving between infill paths inside the same island. #29 2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
af1b64a086 Added unit testing to prevent regression about disconnected infill paths 2012-08-25 14:59:34 +02:00
Alessandro Ranellucci
0aa224ffad Dynamic extrusion width for better gap filling 2012-08-25 14:23:46 +02:00
Alessandro Ranellucci
65b11fa850 Minor refactoring for better readability of perimeter generation logic 2012-08-24 21:58:51 +02:00
Alessandro Ranellucci
92518d28fc New option to configure the threshold for enforcing solid infill. #224 2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
ba58e0733f Avoid backwards moves when doing honeycomb infill. #492 2012-08-24 19:19:45 +02:00
Alessandro Ranellucci
5281b101f9 Some infill paths were still disconnected, causing unnecessary retractions 2012-08-24 18:59:23 +02:00
Alessandro Ranellucci
ee41345ab0 Remove useless Point->id method 2012-08-23 15:46:55 +02:00
Alessandro Ranellucci
d278998f11 Accept newline as separator for post-processing scripts in GUI. #615 2012-08-22 21:27:49 +02:00
Alessandro Ranellucci
b35c41c1a3 Bugfix: retraction was still not working correctly at tool change 2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
edfdf236da Fix for the recent commit about the new retraction settings 2012-08-22 19:47:59 +02:00
Alessandro Ranellucci
4bddb66513 Always emit T0 at the beginning of a multi-extruder print 2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
9e682924c7 New separate options for retraction length to be used when switching tools 2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
075213c731 Refactoring: make 'retracted' an attribute of the Extruder object 2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
97c3756034 Don't force automatic unretraction after tool change 2012-08-22 18:06:50 +02:00
Alessandro Ranellucci
3c2464abf9 Bugfix: crazy temperatures were written when using sequential printing. #625 2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c Bugfix: brim was positioned incorrectly if no skirt was enabled. #627 2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
d6b06e08bc Bump version number 2012-08-19 09:49:43 +02:00
Nicolas Dandrimont
a147530d2a Explicitly avoid passing arguments to remove when called from the event handler 
Wx passes some objects to the callbacks, and we want to ignore those.
 2012-08-11 16:05:17 +02:00
Nicolas Dandrimont
7b0d4cb4e1 Revert "Dereference the Wx object id when removing an object in the plater." 
This reverts commit 4979029cd2.
 2012-08-11 16:00:41 +02:00
Nicolas Dandrimont
4979029cd2 Dereference the Wx object id when removing an object in the plater. 2012-08-11 15:49:06 +02:00
Alessandro Ranellucci
0833b4e021 Releasing 0.9.1 2012-08-10 16:14:35 +02:00
Alessandro Ranellucci
624e16b7e2 Unexpected results splitting objects with threaded perls. #610 2012-08-10 16:05:16 +02:00
Henrik Brix Andersen
2576e3b00a Remove XXX debug output 2012-08-09 23:37:15 +02:00
Alessandro Ranellucci
8289692160 Handle configuration files saved while there was no extruder_offset control for the first extruder 2012-08-09 19:57:49 +02:00
Alessandro Ranellucci
d02012e4a3 Accept multiple --load arguments for GUI too 2012-08-09 00:59:41 +02:00
Alessandro Ranellucci
db8bb8c3d8 Revert "Hide extruder offset settings for the primary extruder" 
This reverts commit 713d87b4c6.
 2012-08-09 00:51:53 +02:00
Alessandro Ranellucci
2bf219a637 Bugfix: random failure to load presets. #600 2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
927b7ce937 Bugfix: skirt height and other options shouldn't be limited to 100. #597 2012-08-08 23:51:40 +02:00