Alessandro Ranellucci
|
537fca47c5
|
Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240
|
2013-03-17 00:42:53 +01:00 |
|
Alessandro Ranellucci
|
700fee14aa
|
Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts
|
2013-03-17 00:24:53 +01:00 |
|
Alessandro Ranellucci
|
c999d0c44f
|
Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users
|
2013-03-17 00:22:53 +01:00 |
|
Alessandro Ranellucci
|
78a4ae4835
|
Use full flow for sparse infill by default
|
2013-03-17 00:21:17 +01:00 |
|
Alessandro Ranellucci
|
35bd5a3423
|
New --solid-infill-extrusion-width option
|
2013-03-17 00:02:31 +01:00 |
|
Alessandro Ranellucci
|
c13d9e9fb3
|
Don't collapse overhangs too early
|
2013-03-16 21:51:38 +01:00 |
|
Alessandro Ranellucci
|
0f5064dd32
|
Untested fix for incomplete honeycomb support material. #1032
|
2013-03-16 21:10:12 +01:00 |
|
Alessandro Ranellucci
|
25554a345f
|
Reorder object copies using a nearest neighbor search
|
2013-03-16 20:56:14 +01:00 |
|
Alessandro Ranellucci
|
cf5adca928
|
New --resolution option to simplify input models
|
2013-03-16 19:58:34 +01:00 |
|
Alessandro Ranellucci
|
10b6bc9d15
|
Removed keep_meshes
|
2013-03-16 19:39:00 +01:00 |
|
Alessandro Ranellucci
|
f4b8185698
|
Fixed typo preventing support material to work with new simplify() syntax
|
2013-03-16 19:11:49 +01:00 |
|
Alessandro Ranellucci
|
db2e76a0df
|
New option to change perimeter order. #534
|
2013-03-16 18:56:49 +01:00 |
|
Alessandro Ranellucci
|
33b40eda18
|
Always fix self-intersecting polygons that Douglas-Peucker might return
|
2013-03-16 18:42:56 +01:00 |
|
Alessandro Ranellucci
|
0f8ca6191a
|
Merge branch 'master' into grow-narrow
|
2013-03-16 16:22:03 +01:00 |
|
Alessandro Ranellucci
|
dc0f706789
|
Bugfix: simplification of support areas could lead to complex polygons with bad orientation, thus causing wrong pattern clipping. #1032
|
2013-03-14 14:27:08 +01:00 |
|
Alessandro Ranellucci
|
f528088d31
|
Merge branch 'master' into grow-narrow
|
2013-03-13 16:39:57 +01:00 |
|
Alessandro Ranellucci
|
9713b9f524
|
Fix narrow fills growing
|
2013-03-13 14:55:58 +01:00 |
|
Alessandro Ranellucci
|
0feef890b1
|
Use Class::XSAccessor
|
2013-03-13 01:29:45 +01:00 |
|
Alessandro Ranellucci
|
cab51d4581
|
One more slight optimization
|
2013-03-13 01:14:47 +01:00 |
|
Alessandro Ranellucci
|
a412291690
|
Little optimization
|
2013-03-13 01:07:06 +01:00 |
|
Alessandro Ranellucci
|
d9b82c79da
|
Grow narrow infill regions into void - to be tested more
|
2013-03-13 01:03:54 +01:00 |
|
Alessandro Ranellucci
|
6058384978
|
Fixed regression causing crash when support material threshold angle was defined. #1048
|
2013-03-12 19:39:43 +01:00 |
|
Alessandro Ranellucci
|
5c1336d2de
|
Clarify that min Z, max Z and layer height are supposed to be expressed in mm
|
2013-03-12 10:28:51 +01:00 |
|
Alessandro Ranellucci
|
a5e6340004
|
Workaround for HideRowLabels() missing in wxWidgets 2.8. #770
|
2013-03-11 20:00:12 +01:00 |
|
Alessandro Ranellucci
|
999af84c54
|
Don't make internal bridges when fill_density == 1. #1045
|
2013-03-11 18:41:12 +01:00 |
|
Alessandro Ranellucci
|
0df8398a39
|
Use concentric infill for internal bridges. #240
|
2013-03-11 18:38:32 +01:00 |
|
Alessandro Ranellucci
|
0eecf33198
|
Bugfix: narrow solid shells were collapsed when spacing was added before generating infill, so we grow them
|
2013-03-11 18:37:01 +01:00 |
|
Alessandro Ranellucci
|
b73c301c55
|
Bugfix: double lift at toolchange. #953
|
2013-03-11 17:06:05 +01:00 |
|
Alessandro Ranellucci
|
0326962d11
|
Merge branch 'new-extra-perimeters'
|
2013-03-11 14:24:02 +01:00 |
|
Alessandro Ranellucci
|
e809a5bdcc
|
Added support for expolygons in Slic3r::SVG
|
2013-03-11 14:23:45 +01:00 |
|
Alessandro Ranellucci
|
b7945ac790
|
Finished new extra perimeters implementation
|
2013-03-11 14:23:16 +01:00 |
|
Alessandro Ranellucci
|
428cd7867d
|
Missing bit
|
2013-03-11 12:47:27 +01:00 |
|
Alessandro Ranellucci
|
74e21d7a04
|
New implementation of extra perimeters - to test
|
2013-03-10 19:08:36 +01:00 |
|
Alessandro Ranellucci
|
964accb588
|
Typo
|
2013-03-10 19:07:41 +01:00 |
|
Alessandro Ranellucci
|
2942485a94
|
New option to make infill before perimeters. #1039
|
2013-03-10 18:15:44 +01:00 |
|
Alessandro Ranellucci
|
ab3d1ac820
|
Give priority to infill extruder if it was used last. #940
|
2013-03-10 17:40:19 +01:00 |
|
Alessandro Ranellucci
|
107f48d894
|
Reduce toolchanges by giving priority to last extruder on layer change. #940
|
2013-03-10 17:28:03 +01:00 |
|
Alessandro Ranellucci
|
dac168eff0
|
Do each island completely if avoid_crossing_perimeters is enabled. #278
|
2013-03-10 16:09:03 +01:00 |
|
Alessandro Ranellucci
|
f10a4787b2
|
Fix layer ordering when printing objects with different layer heights
|
2013-03-10 15:36:52 +01:00 |
|
Alessandro Ranellucci
|
f670acb4b1
|
Slice a single object with multiple layer heights. :-)
|
2013-03-10 14:58:49 +01:00 |
|
Alessandro Ranellucci
|
d1acc511b3
|
Refactor ObjectDialog into a tab panel
|
2013-03-10 12:46:54 +01:00 |
|
Alessandro Ranellucci
|
6a0ba97f0e
|
Move ObjectDialog to a separate file
|
2013-03-10 12:33:10 +01:00 |
|
Alessandro Ranellucci
|
d2152a53a0
|
Missing tooltip for extra perimeters
|
2013-03-10 12:30:43 +01:00 |
|
Alessandro Ranellucci
|
17cbca5e06
|
Factor out layer height in support material generation
|
2013-03-10 12:22:40 +01:00 |
|
Alessandro Ranellucci
|
2ab5fa9c72
|
Factor out layer height from combine_infill()
|
2013-03-10 12:08:18 +01:00 |
|
Alessandro Ranellucci
|
2275de9f0d
|
Factored out the layer height logic
|
2013-03-10 11:37:16 +01:00 |
|
Alessandro Ranellucci
|
e9c7460c11
|
New --bridge-acceleration option
|
2013-03-09 20:31:09 +01:00 |
|
Alessandro Ranellucci
|
2acda9973e
|
Don't apply acceleration settings to travel moves
|
2013-03-09 20:28:03 +01:00 |
|
Alessandro Ranellucci
|
b7b89ff7f2
|
Bugfix: *-acceleration options didn't work in CLI
|
2013-03-09 20:21:05 +01:00 |
|
Alessandro Ranellucci
|
460e169c67
|
New option to disable retraction on layer change
|
2013-03-09 20:05:43 +01:00 |
|
Alessandro Ranellucci
|
e71bf48463
|
Add a command to lift nozzle in default start G-code
|
2013-03-09 19:51:09 +01:00 |
|
Alessandro Ranellucci
|
d50e0af548
|
Make sure the inwards move after last perimeter loop doesn't exceed object boundary
|
2013-03-09 17:15:45 +01:00 |
|
Alessandro Ranellucci
|
caa79583ff
|
Tiny optimization
|
2013-03-09 17:08:17 +01:00 |
|
Alessandro Ranellucci
|
fa41e15c68
|
Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035
|
2013-03-09 17:07:11 +01:00 |
|
Alessandro Ranellucci
|
a2702082b2
|
Merge pull request #962 from scottp/issue_885b
Add defaults into Tooltips from #885
|
2013-03-09 07:48:20 -08:00 |
|
Alessandro Ranellucci
|
9247b3e9f4
|
New --no-plater and --gui-mode options. #604
|
2013-03-09 16:43:09 +01:00 |
|
Alessandro Ranellucci
|
af50272b3b
|
Refactor simple mode definitions to dedicated SimpleTab classes
|
2013-03-09 16:27:18 +01:00 |
|
Alessandro Ranellucci
|
5477d66902
|
Advertise the expert mode in simple mode
|
2013-03-09 14:55:07 +01:00 |
|
Alessandro Ranellucci
|
46f35e39f6
|
Some more tweaks
|
2013-03-08 23:34:57 +01:00 |
|
Alessandro Ranellucci
|
0748e088a0
|
Reorder options in simple mode
|
2013-03-08 23:07:14 +01:00 |
|
Alessandro Ranellucci
|
84f4f098ca
|
Fix cooling and load in simple-mode. #1001
|
2013-03-08 22:58:28 +01:00 |
|
Alessandro Ranellucci
|
b901e1f6c8
|
Merge branch 'master' into simple-mode
|
2013-03-08 22:28:13 +01:00 |
|
Alessandro Ranellucci
|
4fc435f0fd
|
Bugfix: retract speed was applied to travel
|
2013-03-08 17:52:33 +01:00 |
|
Alessandro Ranellucci
|
f494335f77
|
Bugfix: not all the calls to travel_to() were updated
|
2013-03-08 13:50:50 +01:00 |
|
Alessandro Ranellucci
|
2f192bddca
|
Make tests happy
|
2013-03-07 16:24:25 +01:00 |
|
Alessandro Ranellucci
|
97e864699e
|
New top-infill-extrusion-width option
|
2013-03-07 16:00:58 +01:00 |
|
Alessandro Ranellucci
|
36d24ccb0b
|
Infill refactoring and cleanup complete
|
2013-03-07 15:47:32 +01:00 |
|
Alessandro Ranellucci
|
d928f005e6
|
Some incomplete work for cleaner infill logic
|
2013-03-05 20:03:46 +01:00 |
|
Alessandro Ranellucci
|
a9df56670f
|
Bugfix: internal-bridge regions were not touching perimeters
|
2013-03-05 19:33:06 +01:00 |
|
Alessandro Ranellucci
|
37810f777f
|
Make only_retract_when_crossing_perimeters work with avoid_crossing_perimeters
|
2013-03-05 17:30:27 +01:00 |
|
Alessandro Ranellucci
|
72613ae2b4
|
Enable only_retract_when_crossing_perimeters by default
|
2013-03-05 15:01:45 +01:00 |
|
Alessandro Ranellucci
|
70092a9cf5
|
Apply only_retract_when_crossing_perimeters to all infills
|
2013-03-04 23:37:58 +01:00 |
|
Mike Sheldrake
|
28467b68e0
|
typo - fix wrong bridge direction #621
fixes two out of three reported in #621 (but not the first one)
likely the same issue in #706 and #1003
|
2013-02-27 15:16:07 -08:00 |
|
Alessandro Ranellucci
|
a6243124a9
|
Merge pull request #984 from giseburt/origin_master
Fix for Replicator 1 not finishing builds.
|
2013-02-27 02:37:45 -08:00 |
|
Alessandro Ranellucci
|
fafad0fd81
|
Code for memory usage statistics
|
2013-02-27 11:26:52 +01:00 |
|
Alessandro Ranellucci
|
bb83f070ae
|
Load threads::shared before Wx. #1018
|
2013-02-27 11:08:08 +01:00 |
|
Alessandro Ranellucci
|
919d1131f8
|
Use nearest-neighbor search for internal perimeters too. #1025
|
2013-02-27 11:04:14 +01:00 |
|
Alessandro Ranellucci
|
c3d90a1ff8
|
Rename $layer to $layerm in Slic3r::Fill too for consistency
|
2013-02-27 10:44:42 +01:00 |
|
Alessandro Ranellucci
|
a9090688f9
|
Refactor bridge flow to Slic3r::Flow::Bridge class
|
2013-02-27 10:43:50 +01:00 |
|
Alessandro Ranellucci
|
d00c2882c4
|
Remove debug line slipped into last commit
|
2013-02-27 10:30:05 +01:00 |
|
Alessandro Ranellucci
|
bf9fe1b505
|
Bugfix: internal bridge surfaces were incorrectly merged with other internal solid surfaces, causing suboptimal results
|
2013-02-27 01:30:32 +01:00 |
|
Alessandro Ranellucci
|
8ce7b13db5
|
Fixed regression in is_printable() - needs unit test
|
2013-02-26 20:54:40 +01:00 |
|
Alessandro Ranellucci
|
37be4f7319
|
Some cleanup for detect_surfaces_type()
|
2013-02-26 20:52:13 +01:00 |
|
Alessandro Ranellucci
|
f4e8cdbf36
|
Better logic for extra perimeters
|
2013-02-26 20:00:05 +01:00 |
|
Alessandro Ranellucci
|
038737abe6
|
Bugfix: minimum flow for low layer heights was still too low
|
2013-02-26 14:15:05 +01:00 |
|
Alessandro Ranellucci
|
7412d4a687
|
Bugfix: manifoldness error triggered with multi-volume AMF files. #1019
|
2013-02-24 18:17:08 +01:00 |
|
Alessandro Ranellucci
|
bd76e7677c
|
Adjust extra perimeters
|
2013-02-24 17:04:19 +01:00 |
|
Alessandro Ranellucci
|
c3dde74776
|
Fix brim and extra perimeters after recent changes to ->slices
|
2013-02-24 16:40:14 +01:00 |
|
Alessandro Ranellucci
|
de0c2febd9
|
Remove useless lines
|
2013-02-23 23:50:46 +01:00 |
|
Alessandro Ranellucci
|
08a72c0824
|
Use bridge math for the first solid infill layer above sparse infill. #240
|
2013-02-23 21:39:13 +01:00 |
|
Alessandro Ranellucci
|
3b1e921171
|
Slight changes to the defaults
|
2013-02-23 19:14:41 +01:00 |
|
Alessandro Ranellucci
|
0634437364
|
Keep the full geometries in $layer->slices, including thin walls
|
2013-02-23 18:21:29 +01:00 |
|
Alessandro Ranellucci
|
504962712b
|
Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013
|
2013-02-23 17:40:38 +01:00 |
|
Alessandro Ranellucci
|
3eedd4bbed
|
Fixed regression in support material after recent flow refactoring. #1012
|
2013-02-23 16:08:29 +01:00 |
|
Alessandro Ranellucci
|
72df796185
|
Bugfix: failure in launching on Windows with non-ASCII characters in username. #1011
|
2013-02-22 18:40:00 +01:00 |
|
Alessandro Ranellucci
|
28638019ae
|
Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994
|
2013-02-22 18:23:23 +01:00 |
|
Alessandro Ranellucci
|
bec2371604
|
Fix regression introduced in 91bcfc8a74
|
2013-02-22 16:56:43 +01:00 |
|
Alessandro Ranellucci
|
5eade0f9e1
|
Don't validate the number of layers for infill combination, just limit it automatically. #993
|
2013-02-22 16:24:24 +01:00 |
|
Alessandro Ranellucci
|
91bcfc8a74
|
Remove $Slic3r::flow and $Slic3r::first_layer_flow
|
2013-02-22 16:08:11 +01:00 |
|
Alessandro Ranellucci
|
b9c84490b8
|
Get rid of most calls to $Slic3r::flow
|
2013-02-19 12:37:26 +01:00 |
|