Commit Graph

142 Commits

Author SHA1 Message Date
Vojtech Bubnik
4620402ab4 WIP: Initial Fuzzy Skin implementaiton #2010
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00
Vojtech Bubnik
5a1a41096b Fix of a crash when slicing an object producing no layers and
elphant foot compensation is enabled.
2021-01-11 12:20:50 +01:00
Lukáš Hejl
181642b85b Fix of #5528 - Request re-slicing when bottom_solid_layers changes and spiral_vase is enabled. 2020-12-21 09:15:33 +01:00
Lukas Matena
8f3baeb1c9 Fix of #5410 (Ironing untick/tick bug)
This is a follow-up of commit b1b7a5a which fixed several similar bugs
2020-12-18 12:44:24 +01:00
Lukáš Hejl
0ca337ac7a Apply avoid crossing perimeters also for supports. 2020-12-15 06:46:44 +01:00
Vojtech Bubnik
a2959ec944 Fix of re-slicing with multiple regions.
This is a fix of a bug, which was in Slic3r forever, where raw slices
were not cached, but recalculated from classified regions, where
merging the regions did not produce the original contour reliably.
Fixes [2.3.0-beta2] Odd bad slicing related to infill (?) percentage #5407
2020-12-11 12:21:07 +01:00
Vojtech Bubnik
364300055e Fix of spiral vase mode with holes in the bottom: Holes in the bottom layers
(non-spiral vase layers) were being closed.
Fixes Bad slicing in vase mode (unexpected bridge and solid infill layers) #3326
Fixes Model with holes in the base does not slice properly in "Vase Mode" #5359
2020-12-09 14:54:26 +01:00
Lukáš Hejl
bb2eecb42c Fix of #4060 - Add check for the case that all ranges of a volume do not contain any Z. 2020-12-09 07:28:18 +01:00
Lukáš Hejl
0ad135ff93 Fix of #4732 - In spiral vase mode, use the number of layers instead of the value of bottom solid layers if a printed object has a smaller number of layers than the value of bottom solid layers. 2020-12-09 07:21:14 +01:00
Lukas Matena
22f93a34a8 Fix horrible complexity of custom seam lookup (#5067)
- polygons are offset individually
- custom areas are kept separately for each PrintObject
- AABB tree is used to get logN lookup complexity
2020-11-27 10:09:20 +01:00
Vojtech Bubnik
62bdc192d8 Fix of [2.3.0-alpha4] Crash - several models cause crash when slicing #5208
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
2020-11-24 16:01:08 +01:00
Vojtech Bubnik
4280fdb5f2 Reworked connection of infill lines to perimeter lines.
Added a new "infill_anchor" parameter.
2020-11-16 10:54:00 +01:00
Vojtech Bubnik
9a4376ddc6 Fix of previous commit 2020-10-22 17:54:32 +02:00
Vojtech Bubnik
b1b7a5ad1b Fix of ironing invalidation. Fixes
Ironing flag ignored on infill rotate #4937
Ironing does not take effect when you change Top Fill Pattern. #4900
Ironing layer not shown in preview when settings are changed #4510
2020-10-22 17:36:51 +02:00
Vojtech Bubnik
6531061d09 Support for naming slicer own threads for debugging.
The following threads are named with this commit:
slic3r_main, slic3r_BackgroundSlicingProcess,
slic3r_tbbpool_xx_yy where xx is a one based index of the TTB thread
and yy is the platform thread ID.
2020-10-22 13:54:15 +02:00
Vojtech Bubnik
95af708171 Removed m_ prefix from public member variables. 2020-10-09 13:09:21 +02:00
Vojtech Bubnik
7fbdda9080 Renamed monotonous infill to monotonic. 2020-10-05 16:38:28 +02:00
Vojtech Bubnik
e0b0a2cdcf Fix of previous commit. 2020-09-24 20:32:52 +02:00
Vojtech Bubnik
7a799be426 DynamicPrintConfig::normalize() renamed to normalize_fdm(),
optimization of Print::apply()
2020-09-24 19:03:33 +02:00
Vojtech Bubnik
54976e29bb New class ModelConfig wrapping DynamicPrintConfig and a timestamp
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.

Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
2020-09-24 15:34:13 +02:00
Vojtech Bubnik
230dbb7394 Adaptive Cubic infill:
1) Fixed a wrong offset when extracting infill lines from the octree.
2) Added a variant for testing triangle in a bounding sphere
   when buildind the octree. Currently not used as the box test
   is more tight.
3) "Bridging infill" regions are now triangulated and used to densify
   the octree as well to support the bridging infill correctly.
2020-09-22 08:53:45 +02:00
Vojtech Bubnik
7e756b20e6 Adaptive infill: Reshuffled the namespaces. 2020-09-18 10:53:50 +02:00
Vojtech Bubnik
37c5fe9923 Refactoring of adaptive cubic / support cubic:
1) Octree is built directly from the triangle mesh by checking
   overlap of a triangle with an octree cell. This shall produce
   a tighter octree with less dense cells.
2) The same method is used for both the adaptive / support cubic infill,
   where for the support cubic infill the non-overhang triangles are
   ignored.
The AABB tree is no more used.
3) Optimized extraction of continuous infill lines in O(1) instead of O(n^2)
2020-09-17 18:39:28 +02:00
Vojtech Bubnik
1eadb6a1a9 Replaced some of Slic3r::RuntimeError exceptions with Slic3r::SlicingError.
Only Slic3r::SlicingError are now displayed by a notification, other
exceptions are shown by a pop-up dialog.
2020-09-14 18:03:22 +02:00
Vojtech Bubnik
067cde85f1 WIP Refactoring of exceptions:
1) All slicer's exceptions are now derived from Slic3r::Exception.
2) New exceptions are defined for slicing errors.
3) Exceptions are propagated to the Plater to show.
It remains to modify the slicing back-end to throw the new SlicingError
exceptions instead of std::runtime_error and to show the other exceptions
by a message dialog instead of a notification.
2020-09-14 18:03:22 +02:00
Lukáš Hejl
137e7a0712 Fix compiler warnings and failing compilation on macOS 2020-09-10 22:57:58 +02:00
Lukáš Hejl
e9a325c9ca Fix rotation in support cubic infill 2020-09-10 22:30:49 +02:00
Lukáš Hejl
f49144a9ef Move support cubic infill to separate class.
Support infill is enabled in the GUI.
2020-09-10 16:53:08 +02:00
Lukáš Hejl
8fb9b290b2 A prototype of adaptive support infill 2020-09-10 14:55:48 +02:00
Lukáš Hejl
c261624999 A simple version of adaptive cubic support, for testing purposes 2020-09-10 14:52:26 +02:00
Lukáš Hejl
70cb67430c Move rotation from building octree to infill generating 2020-09-10 14:52:21 +02:00
Vojtech Bubnik
6a11e7996e Merge branch 'lh_adaptive_infill' 2020-09-09 16:46:43 +02:00
Vojtech Bubnik
7b318e1698 Refactoring of adaptive cubic infill:
Don't create an octree for the infill if it is not needed.
2020-09-09 15:55:06 +02:00
Lukáš Hejl
5633526ecf Enable changing adaptive infill density for different objects 2020-09-09 14:40:14 +02:00
Lukáš Hejl
acedb66cdc Change to using raw_mesh instead of mesh 2020-09-09 14:40:14 +02:00
Lukáš Hejl
d09ac41d2c Octree's first cube depends on model size. 2020-09-09 14:40:14 +02:00
Lukáš Hejl
33121b705a Change in passing octree struct 2020-09-09 14:40:08 +02:00
Lukáš Hejl
9eeb5e4364 Fix wrong data type 2020-09-09 14:37:20 +02:00
Lukáš Hejl
65ba40f044 Fix crash on inconsistent input 2020-09-09 14:37:20 +02:00
Lukáš Hejl
34f38c4a79 Building octree based on distance from mesh 2020-09-09 14:34:04 +02:00
Lukáš Hejl
6c01d537e4 Enable changing adaptive infill density for different objects 2020-09-03 23:15:46 +02:00
Lukáš Hejl
c2af265df8 Change to using raw_mesh instead of mesh 2020-09-03 16:08:40 +02:00
Lukáš Hejl
fd3a31651c Octree's first cube depends on model size. 2020-09-03 08:04:05 +02:00
Lukáš Hejl
5997f2759c Change in passing octree struct 2020-09-02 22:53:10 +02:00
Lukas Matena
9c59b4f930 Custom seam: Model integration, backend invalidation, 3MF loading/saving 2020-09-01 22:35:01 +02:00
Lukáš Hejl
423d1f2f40 Fix wrong data type 2020-08-31 08:49:17 +02:00
Lukáš Hejl
8e6760e033 Fix crash on inconsistent input 2020-08-30 20:38:07 +02:00
Lukáš Hejl
3ac16d9c9c Building octree based on distance from mesh 2020-08-26 18:15:59 +02:00
Lukas Matena
97bc092cce Renamed FacetSupportType to EnforcerBlockerType
So it's not misleading if we use it for seam painting
2020-08-18 12:00:26 +02:00
Lukas Matena
6d4bb10ec5 Fix of custom supports: object offset for Clipper was incorrectly accounted for 2020-08-12 11:28:30 +02:00