Alessandro Ranellucci
0118c7257f
Update test according to the new Fill/Base.pm syntax
2013-04-25 12:01:40 +02:00
Alessandro Ranellucci
24fd152ce4
Bugfix: cooling buffer was broken. #1149
2013-04-24 11:19:08 +02:00
Miro Hrončok
55c413627f
Bugfix: configuration wizard crash 2 #1077
2013-04-23 16:17:43 +03:00
Mark Hindess
8c26f0da30
Avoid memory leaks by breaking reference cycle: Print -> Fill -> Print
2013-04-18 22:49:43 +01:00
Mark Hindess
aac2c45450
Avoid merging meshes when there is only one mesh to merge.
...
When slicing yoda.stl it reduces peak memory usage by 5% and speeds up
slicing by 13%.
Further optimization using a simple proxy to implement the two methods
(size/extends) needed on the merge meshes is also possible and
undoubtedly worthwhile.
2013-04-18 19:50:05 +01:00
Mark Hindess
407de02fe4
Use binary search for get_layer_range.
...
Gives a 13% speed up on Teethy_Tiki.stl (thing:49334) with default settings
on my laptop.
When $self->layers->[0]->slice_z == $min_z the returned $min_layer value is
0 rather than the (incorrect?) -1 returned by the old code.
2013-04-18 19:29:05 +01:00
Mark Hindess
51d140d7d7
Fix dependencies to require Math::Clipper 1.18.
...
To avoid error "Undefined subroutine &Math::Clipper::int_offset ...".
2013-04-18 18:56:55 +01:00
Alessandro Ranellucci
4e6c58f749
TYpo
2013-04-18 19:49:02 +02:00
Alessandro Ranellucci
17f76c4951
Move bridge detection to its own method
2013-04-18 18:43:46 +02:00
Alessandro Ranellucci
e088d9b3f7
Cache Slic3r::Fill object
2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
312bb285a0
Fix initialization of Rectilinear filler
2013-04-18 18:37:46 +02:00
Alessandro Ranellucci
c46bfc71b4
Merge branch 'master' into boost-optimizations
2013-04-18 17:48:46 +02:00
Alessandro Ranellucci
01bd9040f5
Fix syntax for ex_int_offset2()
2013-04-18 17:46:13 +02:00
Alessandro Ranellucci
b160feacfd
Merge branch 'master' into clipper-optimizations
2013-04-18 17:36:42 +02:00
Alessandro Ranellucci
850690cf79
Minor optimization
2013-04-18 17:36:06 +02:00
Alessandro Ranellucci
430c825918
Align rectilinear and line infill across layers (new implementation). #712
2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
c723c07f8c
Update unit test after recent conversion of Boost::Geometry::Utils to double coordinates
2013-04-15 19:03:02 +02:00
Alessandro Ranellucci
bd3384525e
Revert "Align rectilinear and line infill across layers. #712 "
...
This reverts commit a0a54ea706
2013-04-15 11:33:24 +02:00
Alessandro Ranellucci
a0a54ea706
Align rectilinear and line infill across layers. #712
2013-04-11 19:36:49 +02:00
Alessandro Ranellucci
c2aa119c09
Require Boost::Geometry::Utils 0.08
2013-04-09 14:03:24 +02:00
Alessandro Ranellucci
8030eaaa04
Remove debugging statements
2013-04-09 14:02:49 +02:00
Alessandro Ranellucci
94ed6cd239
Always move Z at travel speed. #1093
2013-04-08 22:23:51 +02:00
Alessandro Ranellucci
6b989203b4
Merge pull request #1107 from obra/nearest_point_index_perf_part_2
...
Nearest point index perf work part 2
2013-04-08 12:09:49 -07:00
Jesse Vincent
7ec6332141
split apart the math in nearest_point_index and short-circuit if we know the candidate is no good
2013-04-07 19:53:15 -04:00
Jesse Vincent
e8ca1e59a6
no functional change. only return from one place for clarity
2013-04-07 19:44:32 -04:00
Jesse Vincent
da0e67a891
Only look up $point's X and Y once, rather than once on every pass through the loop.
...
(Those lookups are expensive)
2013-04-07 18:28:08 -04:00
Jesse Vincent
3e8c5804fe
Inline comparable_distance_between_points
...
It was called on an incredibly hot codepath from a single place. At 12313276 calls
on my test .stl, the sub call overhead alone was a significant perf hit.
2013-04-07 18:13:40 -04:00
Jesse Vincent
060d2da7fe
Small optimization on an incredibly hot codepath.
2013-04-07 18:01:15 -04:00
Alessandro Ranellucci
7e51cbcf69
Allow 0.1mm slots. #959 #1056
2013-04-04 01:24:40 +02:00
Alessandro Ranellucci
b4be61b703
Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071
2013-04-04 01:17:44 +02:00
Alessandro Ranellucci
a563801304
Merge branch 'master' of github.com:alexrj/Slic3r
2013-04-04 01:15:46 +02:00
Alessandro Ranellucci
3afeb5c7b5
Second layer commands were written multiple times
2013-04-04 00:52:11 +02:00
Alessandro Ranellucci
b725847a51
Bugfix: configuration wizard led to crash with simple mode. #1077
2013-04-03 19:26:59 +02:00
Alessandro Ranellucci
88e70a59c7
Don't wipe if option is disabled
2013-04-03 19:08:12 +02:00
Alessandro Ranellucci
d089d2b2d4
Bugfix: crash introduced by wipe
2013-04-03 19:06:33 +02:00
Alessandro Ranellucci
44f91cb805
Merge pull request #1085 from fehknt/master
...
fix for issue 1076
2013-04-03 07:25:21 -07:00
Devin Grady
e602aad998
inspired by f5e48a3, a seems to work to fix 1076
2013-04-01 22:12:51 -05:00
Alessandro Ranellucci
bf809d1fd0
Use linestring_length() from Boost
2013-03-31 19:50:22 +02:00
Alessandro Ranellucci
1187f4846d
Some Clipper optimizations
2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
0d6ff22e19
Merge branch 'wipe'
2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
0e6d80d33c
Bump version number
2013-03-31 11:24:33 +02:00
Alessandro Ranellucci
01e86c2615
Releasing 0.9.9
2013-03-30 15:59:17 +01:00
Alessandro Ranellucci
04d2231901
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
7f23e72a10
Display preview for small files too. #929
2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d
better handling of too-small and too-short models #929 .
...
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
ac2356f66a
Don't crash at the end of empty prints. #1042
2013-03-30 00:36:14 +01:00
Alessandro Ranellucci
7b7c9f6330
Launch even if config is corrupted. #1067
2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
f5e48a306d
Bugfix: support material and brim didn't work correctly. Includes unit test. #1074
2013-03-30 00:21:09 +01:00
Alessandro Ranellucci
d4119b0eb1
Better bridge direction detection. #1068
2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
5beb2187d3
Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068
2013-03-29 19:24:08 +01:00
