Before it was enabled by default. That means if the constructor fails,
the destructor will complain that the module was not stopped before
deconstructing.
We can't just call stop if module creation fails because the module is
only partially initialized.
* The xworkspaces module should wait for EWMH to become available
Before this change if EWMH wasn't available the xworkspaces module was
permanently disabled. When polybar was started alongside the window
manager e.g. from .xinitrc this caused a race condition between polybar
and the window manager and the xworkspaces module may or may not be
displayed. After this change polybar will wait for EWMH to become
available. This change closes#1915, see that issue for more details.
Curiously this only required the removal of the error condition which
used the be raised when EWMH wasn't available. The xworkspaces module
will show up on the bar as soon as the first EWMH event is processed by
the existing event handling code. I can't argue much about the
correctness of this patch but it seems to work flawlessly in my testing
with xmonad. I didn't test any other window managers. Note that removing
the error condition below which checks that _NET_DESKTOP_VIEWPORT is
available might make this work with pin-workspaces=true. I couldn't test
the effects of that change because I only tested with xmonad and xmonad
doesn't support _NET_DESKTOP_VIEWPORT, so I didn't make that change.
* xworkspaces: Remove check fo _NET_DESKTOP_VIEWPORT
Implementations that don't support it will just return an empty list for
get_desktop_viewports and pin-workspaces won't do anything.
* Update changelog
Fixes#1915
Co-authored-by: Tim Schumacher <tim@timakro.de>
Co-authored-by: patrick96 <p.ziegler96@gmail.com>
* WIP ipc actions
* feat(ipc): Add hook, prev, next and reset actions
Closes: #2464
* ipc: format code
* ipc: fix comparison
* Apply suggestions from code review
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* ipc: make index 0-based
* ipc: add 0-based indexing breaking change to Changelog
* ipc: restore 1-based index for and message
* ipc: fix initial=0 throwing an error
Co-authored-by: Martin Terneborg <martinterneborg@protonmail.com>
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Allow running polybar without BAR argument
The configuration file must declare a single bar to be able to not name
it.
* Check barname not in config and improve error message
* Revert README changes
* Add no bar in config file error detection
* Create default config and install to /etc/polybar
Closes#2405
* Search for config in /etc
We search in XDG_CONFIG_DIRS, /etc/xdg, and /etc but only for config.ini
Closes#2016
* Remove config installation from build.sh
* Remove userconfig cmake file
* Cleanup
* Cleanup default config
* Update CHANGELOG.md
Co-authored-by: dvermd <315743+dvermd@users.noreply.github.com>
* Update src/main.cpp
Co-authored-by: dvermd <315743+dvermd@users.noreply.github.com>
* Add tests for string functions
* Support loading bars from fallbacks in /etc
* Combine duplicate string_util::contains test
Co-authored-by: dvermd <315743+dvermd@users.noreply.github.com>
* config_parser: Improve error messages
This commit adds an additional context with configuration file name and
line number to some error messages in the config_parser.
* config_parser: Add file name and line number to invalid_name_error
* config_parser: Update unit tests to avoid crashes on regressions
The previous CAST_MOD(Impl) for the action_router constructor was
illegal because `this` is not yet of type Impl (because the subclass
constructor has not run yet).
The action_router now accepts std::function for its callbacks.
Fixes#2519
Fixes#1978
* Move tail and non-tail handler to method
Defining them in the constructor is ugly.
* script: Iterate over defined actions instead of fixed list
* Separate running logic and lock m_output
* Include POLYBAR_FLAGS in linker flags
* Stop using m_prev in script_runner
* Join module threads in stop function
Joining in the destructor may lead to UB because the subclass is already
deconstructed but the threads may still require it to be around (e.g.
for calling any functions on the instance)
* Cleanup script module
* Update changelog
* Remove AfterReturn class
* Remove m_stopping from script module
* Fix polybar not reading the entire line from child process.
For every `readline` call we created a new fd_streambuf. This means once
`readline` returns, the streambuf is destructed and and pending data in
its temporary buffer discarded and we never actually read it.
* Remove unused includes
Returns a list of key-value pairs starting with a prefix.
If you have in config:
```
env-FOO = bar
env-CAT = dog
```
then `get_with_prefix("env-")` will return
`[{"FOO", "bar"}, {"CAT", "dog"}]`
* Remove DEBUG_SHADED
Was disabled by default AND behind an #if 0
* Make TimerHandle expose more libuv functions
* Prepare for moving double clicks into eventloop
* Make eventloop available to bar
* Remove bar mutex
Everything in the bar is now in the same thread
* Move double-click handling to eventloop
* Extract double click deferred function into method
* Stop throttling clicks
* Increase double click interval to 400 and add option
double-click-interval in the bar section
Closes#1441
* Implement dimming using timer handles
* Remove taskqueue
* Remove unused dependencies
* Cleanup & Comments
* feat(ramp) Implement ramp weights
*Add test for ramp weights
*[drawtypes/ramp] Implement ramp weights
Simply clone `label_t` weight no. of times in the icon list
This helps us not to change any of the calculations.
*Fix silly bug
Forgot to add a hyphen for the `weight` parameter.
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
*doc: add #1750 to CHANGELOG
* Fix compile error in ramp test
Use std::make_shared.
The eventloop no longer uses them. libuv will coalesces multiple
uv_async_send if they happen one after another and this also leads to
coalescing of updates.
This is needed because the handle's lifetime has to be at least the
lifetime of the eventloop since the eventloop requires the handle's
memory during shutdown (for closing the handles).
* feat:add tokens to display memory in MiB when GiB val <= 1.0 (#2472)
* fix: correct swap_used calculation
* fix: pass variable by reference rather than by value
* fix: add precision arguments to filesize_gib_mib(); better condition
* doc: add #2472 to CHANGELOG
* fix: missing default argument values
* Apply suggestions from code review
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
This adds the 'send' action to the ipc module that can be used to send arbitrary text to the module:
polybar-msg action "#ipc.send.%{F#4444ff}hello%{F-}"
* feat(ipc): allow receiving arbitrary text on IPC socket
Instead of just allowing hook numbers to be executed, the user can
send arbitrary text and the IPC module will put it in the bar. The IPC
payload format is extended to accept an arbitrary string if the first
character after the module name is ':'.
polybar-msg hook test :'%{F#4444ff}hello%{F-}'
Fix#2455
* Use actions for sending data to ipc module
* ipc: Don't use exceptions when no hooks are defined
* Update src/modules/ipc.cpp
Co-authored-by: patrick96 <p.ziegler96@gmail.com>
* Add toggle_visible action
* Add set_visible and set_invisible actions
* Rename toggle_visible method to match
`action_toggle_visible` -> `action_toggle_visibility`
Matches with `EVENT_TOGGLE_VISIBILITY`
* Update CHANGELOG
* Revert #2320 IPC commands
IPC commands are no longer necessary now that the actions are
implemented. Changed some method permissions as well to reflect this.
* Add logging and change action names
- `module_toggle`
- `module_show`
- `module_hide`
Delineate common actions to all modules with a `module_` prefix (for
future actions too)
* Update documentation
While it shouldn't happen with compliant WMs, it was possibe to crash
polybar with _NET_CURRENT_DESKTOP >= _NET_NUMBER_OF_DESKTOPS and this
should not be possible.
Includes polybar/xpp#31
Fixes#2398
When `pin-workspaces` is set to true using `show-urgent` will show
urgent workspaces on the bar even when the workspace is not associated
with the current monitor.
The renderer now only stores the positions of the actions because that
is specific to the renderer and because the actual position can only be
finalized after all the rendering is done because intitially the
positions are relative to the alignment and not the bar.
The variables storing the current colors, attribute activations and font
were only used in a single place and can easily also be read from the
context.
This allows us to remove a lot of the state of the renderer.
* add reverse-scroll option for xworkspaces module
* move use of reverse-scroll option to when producing scroll action
* documented xworkspaces reverse-scroll option in changelog
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Also:
- Add documentation about the escape character to polybar(5) manpage
- Add info about the escape character to changelog
- Add testcases for ParseLineKeyTest
- Add new test ParseEscapedValueTest
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add escape character documentation to manpages
Add information about the escape character to the polybar(5) manpage.
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Fix parse_escaped_value
Add more test cases for ParseLineKeyTest
Update CHANGELOG.md
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Adress review
- Adjust documentation
- Small code changes
Improve parse_escaped_value
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Add more test cases for ParseLineKeyTest
Adress review
- Adjust documentation
- Small code changes
Remove duplicate testcase from ParseLineKeyTest
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Remove duplicate testcase from ParseLineKeyTest
Because we passed a temporary as the logger, it gets destroyed after the
config_parser constructor returns and when the logger is called in
config_parser it operates on a dangling reference.
Ref: https://stackoverflow.com/q/35770357/5363071
* build: Add -Wsuggest-override
We should always use the override specifier when overriding virtual
functions. This helps prevent errors when a subclass tries to create a
function with the same name as a virtual function in a super-class but
with a different purpose.
* clang-format
* Upload logs on failure
* Add override to unsupported.hpp
* cmake: Make -Wsuggest-override flag conditional
* module: Implement proof of concept action router
Action implementation inside module becomes much cleaner because each
module just registers action names together with a callback (pointer to
member function) and the action router does the rest.
* Make input function final
This forces all modules to use the action router
* modules: Catch exceptions in action handlers
* Use action router for all modules
* Use action_ prefix for function names
The mpd module's 'stop' action overwrote the base module's stop function
which caused difficult to debug behavior.
To prevent this in the future we now prefix each function that is
responsible for an action with 'action_'
* Cleanup
* actions: Throw exception when re-registering action
Action names are unique inside modules. Unfortunately there is no way to
ensure this statically, the next best thing is to crash the module and
let the user know that this is a bug.
* Formatting
* actions: Ignore data for actions without data
This is the same behavior as before.
* action_router: Write tests
Modules can now also be shown and hidden using ipc commands:
$ polybar-msg [-p PID] cmd hide.mymodule # Hides module mymodule
$ polybar-msg [-p PID] cmd show.mymodule # Shows module mymodule
$ polybar-msg [-p PID] cmd toggle.mymodule # Toggles visibility of mymodule
* Hopefully implement visibility checking
* Implement hide command
* Implement `show` and `toggle` commands
* Refactor and add some logging
* Run style checks and update CHANGELOG
* Get around unused parameter warnings
* Change `set_visible` to return nothing
* Make errors more informative
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update bar when changing module visibility
- Called in the module to maintain dependence on the signal emitter
- Update CHANGELOG to make changes more verbose
* wrong var
* Update include/modules/unsupported.hpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Each major target of polybar can now be enabled/disabled while
configuring (even polybar itself).
The cmake code specific to each target will only run if the target is
enabled.
This allows us to for example just build the documentation without
having to run all the cmake code related to compilation or having the
polybar dependencies installed (other than sphinx).
They were required before, but could technically be deactived (the
compilation would fail, but configuration was possible).
The WITH_XRANDR and WITH_XCOMPOSITE now no longer appear in the cmake
part. It still appears in the source code, but is always set to 1
Fixes#1536
A window can have the urgent hint set while being in a focused tag if that
window is not in focus. As a result, the urgent state should overrule the
focused state.
I also added a pretty truth table.
Don't get the socket path from cmake or from an environment variable. Instead,
get it from the polybar config. If it's not specified, the default is
/tmp/dwm.sock which is default for the IPC patch.
This way is easier for the user to configure.
To keep consistency, use functions to update all labels. Since the labels have
tokens that have to be replaced, if this needed to be changed, or if the label
updating code needed to be changed, it could easily be done in one place without
having to scour the code for all places where the label is updated. It improves
refactorability.
This decouples the token replacement of labels from other functions and keeps
that code contained to the update label functions.
Since functions like update_title_label and update_floating_label already exist,
it makes sense to stick with this pattern of using functions to update the
labels. For updating the labels in different ways, overloaded functions can
simply be used.
This label is visible when the currently focused client is in floating mode and
detached from the layout. It uses the focused_state_change_event as well as the
focused_client_change_event to check if the focused client is floating and
updates m_is_floating accordingly which will enable/disbale the floating label
in the final output.
update_floating_label is called when the floating state of the client is not
known. The function queries dwm for the properties of the focused client and
sets m_is_floating accordingly.
This fixes issue #2.
Instead of defining the event name for each event, define the command name that
is to be called for that event. This simplifies the code since many events call
the same command. It is already clear from the cmd function which event is being
registered, so it is more clear to see the association between the command and
the event in the code this way.
Rename settings and allow more flexible configuration by allowing the user to
enable click handlers for the tags and the layout label separately.
Add a scroll handler for the layout label so the user can scroll through the
available layouts. Enabling layout-scroll-wrap allows wrapping back to the
beginning/end of the array of available layouts.
next_layout and prev_layout take the address of a layout and returns the
next/previous layout in the m_layouts array if possible, wrapping if specified,
otherwise returns the same layout. This is used to for the layout scroll
handlers to cycle through layouts.
secondary-layout-symbol is the symbol of the layout to switch to when the layout
symbol is left-clicked. This symbol is used to look up the memory address of the
layout to set. The default is the monocle layout.
setlayoutsafe is the dwm command name for setting layouts. The argument is the
layout memory address. Left-clicking switches to the layout represented by
secondary-layout-symbol, and right-clicking switches to the previous layout
(specified by an argument of 0).
To keep track of the different layouts, the layouts are retrieved in the
constructor if the layout label is included and stored in m_layouts.
m_current_layout is updated with the address of the current layout.
m_default_layout is updated in the constructor to the first layout in the array
which is the default layout in dwm. m_secondary_layout is updated to the address
of the layout identified by secondary-layout-symbol.
The builder adds click handlers (if layout label is included) to the layout
symbol as described above. Left-clicking toggles between the secondary layout
and the default layout. Right-clicking toggles between the previous layout and
the current layout.
find_layout are a pair of functions for finding a layout by address or symbol
from the m_layouts array.
build_cmd simplifies building a command string and helps avoid typo errors when
adding new commands since most commands follow the same format.
Rename EVENT_LCLICK and EVENT_RCLICK and to EVENT_TAG_LCLICK and
EVENT_TAG_RCLICK for clarity and to allow specifying multiple click commands in
the future without confusion.
Also remove std:: from vector since it is not needed.
If pin-tags is set, there is no format defined for tags that are not occupied.
However defining a format for unoccupied tags makes the pin-tags setting
redundant since then the label can just be set to empty to not show unoccupied
tags.
Following the above reasoning, the pin tags setting is removed, and
state_t::NONE is renamed to state_t::EMPTY. This way if a user wants to display
empty tags, they can specify the format, otherwise they can simply set the label
to an empty string.
The command strings were not updated since the event variable formats changed.
Also, the EVENT_PREFIX already contained a dash, so an extra character would be
erased when adding 1.
Don't move the cmd string into the check_send_cmd function since if the first
event doesn't match, the cmd string would have been modified when passed to
the function again to check if the second event matches.
Remove EVENT_SCROLL_{UP_DOWN} since it is not being used.
Change EVENT_PREFIX to include dash and event names to be just the name without
the prefix, for simplified parsing. Use check_send_cmd function to parse the
cmd, using the event name as the IPC command name, and the section after the
event name to be the argument. The format of a cmd would be "dwm-<event
name>-<arg>", so the cmd can easily be translated into an IPC command.
Call member functions for all dwmipc events for better organization and to avoid
cluttering the constructor. The dwmipc event functions are now just assigned to
a lambda that calls a member function.
Add update_tag_labels function for updating the tag labels based on their state
since this code is repetetive.
Add update_title_labels function since that code is also somewhat repetetive.
Move reconnect code to reconnect_dwm for better organization.
Use pointers to m_monitors array elements instead of holding onto indices, since
most of the time, a member of the Monitor element will need to be accessed.
These variables should always hold a valid address starting in the constructor,
so checks for nullptr should not be necessary. A monitor will always be active
and the bar will always be mapped onto a monitor.
Add some comments where needed.
Reorganize the constructor into a more logical format
Only subscribe to events if their labels are included in the default format.
Follow clang-tidy warnings and use trailing return types.
Move m_ipc->get_monitors to update_monitor_ref since in most cases where the
monitor references would need to be updated using geometry, m_ipc->get_monitors
would need to be called.
This fixes issue mihirlad55/polybar-dwm-module#4 where the title would not
update if the title of the currently focused window changed. The
focused_title_change_event is raised exactly when the focused window's
title changes, so this should automatically update the title using the callback
when necessary.
The module is currently working, but not fully stable. All tags specified in
config.cmake for internal/dwm are supported. This was implemented following the
i3 and bspwm modules. There is still some cleaning/refactoring to do to polish
the module up.
Include dwmipcpp as a library in cmake and config files, so it can be built
automatically. The configuration of dwmicpp was added to match that of i3 and
bspwm to maintain the same cmake workflow and style.
* Add variant support to xkeyboard layout label
Solves #316
* Run style checks, I guess?
* Add comment
* Return nothing if there is no variant
* Update CHANGELOG
* refactor(color): Use enum class for color type
* Add testcases for tag parser
* Make tag parser a pull-style parser
Being able to parse single elements at a time gives us more fine-grained
error messages, we can also parse as much as possible and only stop
after an exception.
* fix(color): Parser did not check for invalid chars
* tag parser: First full implementation
* tag parser: Fix remaining failing tests
* tag parser: Replace old parser
* tag parser: Treat alignment as formatting tag
Makes the structure less complex and the alignment tags really are
formatting tags, they are structurally no different from the %{R} tag.
* tag parser: Cleanup type definitions
All type definitions for tags now live in tags/types.hpp, the parser.hpp
only contains the definitions necessary for actually calling the parser,
this shouldn't be included in many places (only places that actually do
parsing). But many places need the definitions for the tags themselves.
* Rename components/parser to tags/dispatch
* tag parser: Cleanup
* Add changelog
The change in #2270 accidentally broke how we access module types.
module<Impl>::TYPE always points to the module superclass and it thus
accesses its empty TYPE field.
This mainly broke legacy action handling.
Ref #2270
Since the forked processes are still our children, we need to wait on
them, otherwise they become zombie processes.
We now fork twice, let the first fork immediately return and wait on it.
This reparents the second fork, which runs the actual code, to the init
process which then collects it.
Ref #770
For some reason when passing some non-const strings to convert, the
convert(T&& arg) method was used instead of the one specialized for
strings.
This caused an error in clang because you can't pass objects with
non-trivial types to varargs functions.
The best solution I found was to just add a specialized function for
non-const strings.
If two WM events arrive withing 25ms of one-another, the second one does
not trigger a bar update.
The module state is still correct, it is just not reflected in the bar.
This somehow caused updates being swallowed in fluxbox, but only after
PR #882 was merged, even though that 25ms restriction existed long
before that.
Fixes#2272
Since 3.5.0, we use m_interval for a modulo operation, this crashes the
bar if the interval is 0. A non-positive interval shouldn't be allowed
anyway, so we now throw an exception in that case.
Fixes#2273
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* Added WARN state for cpu module
* Implement WARN state for CPU, Memory modules, working on fs module
* Implement WARN state for fs module
* Simplify WARN state implementation for cpu and memory
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
* implement warn state on battery module, standardize the implementation on other modules
* minor fixes
* fix annoying error
* use more intuitive param name
* Fix percentage with borders bug
* Make requested changes
Hide the effect of warn states when unused
* Backward Compat: use no format instead of fallback label
* Reformat
* Refactor
* Reformat
* Reformat: convert tabs to spaces
* Reformat
It was not quite clear how try_apply_alpha should behave if the given
color was not ALPHA_ONLY. The implementation just returned 'this'.
However, the build relied on it returning the given color.
This broke all bg and fg settings in the entire bar.
To clear this up, we switch this around take the alpha channel of 'this'
and also return 'this' if it isn't ALPHA_ONLY.
Fixes#2255
New config option `speed-unit = B/s` will be used to suffix the upload and download speeds.
* mod::network: udspeed-unit to set network speed unit suffix
* Changed udspeed-unit to speed-unit
Shell commands triggered from action tags used to block polybar until
they finished.
Since we are not actually interested in the output of the commands, it
makes sense to run them completely detached from polybar and have
polybar not block when executing these commands.
Now the spawned child processes no longer get killed when polybar
exits. This is fine because polybar is not responsible for these
processes since they were explicitly started by the user through click
commands.
Ref: #770
Ref: #1680
The intent is for every color to be stored in a rgba instance
The rgba class now stores the color in a 32 bit integer to save space
This also removes the unused class rgb and moves everything else into a
cpp file.
Many functions also had weird template parameters. For example
alpha_channel<unsigned short int> would give a 2 byte number with the
alpha channel byte in both bytes.
color_util::hex would return a hex string with alpha channel if unsigned
short int was given and without if unsigned char was given. Even more
curiously those parameters were passed to *_channel and the result
nevertheless truncated to 8bits.
Only modules can now be action handlers.
This also slightly simplifies the controller because we don't need to
keep track of input handlers, we can just use the module list.
All modules now expose their actions as public static constants
Issues: The menu module no longer closes when an item is clicked (before
it would intercept any executed command and look if it matches one of
its exec commands)
This allows us to identify module by their type and it is also better to
store the module type as part of the module instead of having it
hardcoded in factory.hpp
Action strings now have the form '#MODULE#ACTION'
For example to trigger the action 'toggle' in the 'module/date' module
one would now use '%{A1:#date#toggle:}'
With this action strings can now be uniquely assigned to one module.
Fixes#1172
ramp-0 is used for everything <= base-temperature and ramp-N is used for everything >= warn-temperature
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
Any timer_module based module would sleep for the set interval and then
continue running. Depending on the start time of polybar this
sleep pattern might not be aligned, which causes such modules to always
update in a shifted manner.
Consider the date module as an example. If the update interval is set to
60 seconds and polybar was started at 13:37:37, polybar would update the
clock at 13:38:37, 13:39:37 and so on.
To make matters worse, if a module would perform lengthy checks this
interval might drift over time, causing even more inconsistent updating.
This patch extends the base module with a sleep_until method that calls
the corresponding function on the sleephandler. Additionally the
timer_module is extended to compute the remaining time until the next
interval passes and sleep accordingly.
Closes#2064
Co-developed-by: Dominik Töllner <dominik.toellner@stud.uni-hannover.de>
Co-authored-by: Malte Bargholz <malte@screenri.de>
If an input is enqueued as a response to an input, the new input will be
swallowed because it will likely be enqueued less than 30ms after the
original event.
This is not something that is an issue right now but it is required to
finish #1907 where, in order to close the menu after a click, the menu
module gets an exec action that closes the menu and adds a command to
the event queue.
The setting also isn't too useful since it will just break polybar input
handling if inputs arrive too fast instead of (possibly) slowing down
the bar.
Before the module would just try to evenly distribute desktops
(workspaces) among the viewports.
But since `_NET_DESKTOP_VIEWPORT` actually maps desktops to viewports,
we can use that information to assign workspaces to the right viewport.
Fixes#1849Fixes#1764
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
Before it would only reload if the size changed and even that was
reliable since the method relied on the order of the monitor list.
Now if the monitor list differs in any way (pos, dimension, primary,
output, name) a reload is issued
Because of how monitors are removed inside the loop and depending on the
monitor order a cloned monitor may be assigned a width of 0 but is never
actually removed resulting in polybar saying the bar is out of bounds
Fixes#1794
Premature optimization that tried to cache monitors but the cache did
not take into account the parameter values.
The call `get_monitors(..., ..., false, true);` would get all connected
and unconncected monitors a subsequent call
`get_monitors(..., ..., true, false);` would get back the same list of
monitors even though it requested only connected monitors.
Additionally `get_monitors` is never called periodically so the
optimization really didn't help much.
The github module only authenticate by query string, and this method is deprecated:
https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/#authenticating-using-query-parameters
There is no reason to remove it before the method stop working, so I've made possible to the user choose which authentication method he will use:
* The parameter token remain unchanged.
* If the parameter user is passed then the module will use the not deprecated method, passing user and token on the body of the requisition. Otherwise the module will use the deprecated method.
Co-authored-by: Lucas <araujo.lucasvale@gmail.com>
Fixes#2002
Adds `format-offline` and `label-offline`
* feat(github): offline label & fixes
* Clear label if there are no notifications and empty-notifications = false
* clang-format
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
