1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-16 07:21:47 +00:00
Commit Graph

7722 Commits

Author SHA1 Message Date
Scott Lahteine
445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6 Prevent illegal leveling combinations
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645 another compile error
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
M355 case light improvements (replaces PR #5685)
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee copied file changes from PR #5685
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9 fix compile error
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a Formatting in _draw_heater_status 2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36 Patch lcd_print edge limit code 2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920 User Command (Script) Menu
The menu (commands / scripts) is configurable in `Configuration_adv.h`.

- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037 Edit PROPORTIONAL_FONT_RATIO comment 2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede Fix UBL "Info screen" menu items 2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e Fix LCD print aborted message 2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d Draw on LCD after value has changed 2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43 Rename Feedrate to Velocity to match prior naming 2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5 Patch up LCD Bed Leveling menu 2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3 Show home option in level bed menu 2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293 Patch G29 A and Q arguments to bypass setup 2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e Use NAN for G29 W omitted parameters 2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138 Fix spacing in JSON output 2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd Have G28 do a refresh of the display 2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04 General cleanup of spacing, comments 2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4 Return to Bed Leveling menu when done 2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1 Fix lcd_synchronize with message 2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2 Don't draw progress bar until it has 1% 2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55 Start at Z=0 in manual probing 2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0 Allow lcd_setstatusPGM to reset the alert level 2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c Case light as a toggle menu item 2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8 Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6 Add more options to the Bed Leveling menu 2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf Split up Control > Motion submenu 2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921 Reference op with variable name 2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518 Scrolling status message option 2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57 Prevent bed temperature being set too high 2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62 Fix some compiler warnings 2017-05-28 11:06:33 -05:00
christianh17
f379a326cc enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02 Code style tweak to gcode.h 2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee Updates to language_es.h based on latest updates. (#6871)
Spanish language updates
2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537 Tweak to gcode.h 2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae value check was looking at the code 2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16 Unify M600 and M125 pause features (#6407)
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013 Patch up LCD level bed menus 2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444 Fix PROBE_MANUALLY via G-code 2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391 One fewer EOL in M503 output 2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464 Fix screen change on character display 2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE 2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4 Merge pull request #6848 from thinkyhead/bf_scara_M665
Add M665 for SCARA
2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373 Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
UBL ultralcd.cpp patches
2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113 Use M665 to set SCARA angle offsets 2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724 Apply const in prepare_kinematic_move_to 2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5 Fixes for spindle/laser and SCARA probe bounds 2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df Neater Megatronics 3 pins 2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb Patch for M503 output 2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874 Some cleanup, fixes for ultralcd.cpp UBL code
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507 New GCode Parser - Configuration 2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e One more mesh_index_to_npos update
Followup to #6827
2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d Fix, extend G42 with P (probe) parameter
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2 Merge pull request #6831 from thinkyhead/bf_move_g7
Move G7 to G42
2017-05-23 03:02:57 -05:00
Brian
82ca6248e2 Move G7 to G42
See: #6777
2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3 Use redraw flag for both types of LCD 2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527 Merge pull request #6817 from cbusillo/patch-1
missing enable for M605 for duplication mode
2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd Use new attribute macros in more places 2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e Embed G26/G29 in ubl class, with enhancements 2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889 Apply const float & more 2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c Cleanup some fastio code 2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39 Single user_canceled function in G26 2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49 Clean up whitespace 2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1 Fixes #6828: M428 bug 2017-05-22 17:34:03 -05:00
oldmcg
48f7652143 UBL G29 -P3.1 smart fill (#6823)
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.

* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
Constrain LCD status message rendering
2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44 Misc. Clean Up (#6822)
* Misc. Clean Up

Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.

* Huh???   GitHub Desktop screwed up!

* get the planner object in scope

* Fix out of scope z_fade_height

* Travis timed out...

I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b missing enable for M605 for duplication mode
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5 Show Restore Failsafe item with EEPROM off 2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5 tweaks 2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c Constrain LCD status message rendering 2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c Fix set_lcd_contrast 2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
Cleanup code, organize & document fastio pin mappings
2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613 Update Configuration.h files to better names (#6814)
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49 Formatting, const in G33 2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1 Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade General cleanup to utf_mapper.h 2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775 UBL-related cleanup, spacing, standards
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3 Pins-related cleanup, formatting 2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7 Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
Add "live editing" option to LCD menus
2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9 Add live editing option to LCD menu 2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc Temp-related cosmetic changes 2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4 Use uint16_t for temps 2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88 Access hotend/bed temperatures as float 2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a G33 evolutionary changes 2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a UBL tabs, whitespace, spelling, etc. 2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8 Disable PROBE_MANUALLY for UBL
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian
01f452c37c Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5 Add checking 2017-05-17 19:46:16 -04:00
Brian
13599a73c7 Add G7 gcode command to move between UBL mesh points
- can be augmented in the future to enable for other leveling systems

Quite simple, but did not want to modify `G1` as the additional checking would slow it down.

Tested & working.
2017-05-17 19:05:36 -04:00
Brian
43c24f0027 Fix recent regressions, &c.
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a Patch LCD code for 5th extruder, EEPROM reset 2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6 Some probe_pt error-handling 2017-05-17 15:33:51 -05:00
Brian
3370329751 Fix broken EEPROM save/load 2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411 Ensure Arduino.h and configs are included for serial.cpp 2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294 Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
Implement CRC16, develop mesh allocation table
2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
Spindle / Laser support
2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626 Merge pull request #6752 from jdelahayes/bugfix-1.1.x
Update french language
2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036 SPINDLE/LASER implementation 2017-05-17 04:26:15 -05:00
Scott Lahteine
ffe0e2d19a SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
Scott Lahteine
99c4900a98 SPINDLE/LASER config changes 2017-05-17 04:23:06 -05:00
Scott Lahteine
a3abfeac47 Mark strings needing translation 2017-05-17 03:49:33 -05:00
Scott Lahteine
7f4e4b1212 UBL name/state methods 2017-05-17 03:49:32 -05:00
Brian
7852369987 Implement CRC16, develop mesh allocation table
- Add crc16 utility function
 - Implement CRC16 for config store, remove old checksum, increment layout version
 - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
 - Begin to lay out MAT structure, prototype functions, etc.
 - Rename ubl.state.eeprom_storage_slot to .storage_slot
 - Misc. optimization
 - Cleanup/standardize/improve some messages

This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine
00d358d92d Fix a PROBE_MANUALLY bug in ultralcd.cpp 2017-05-17 03:49:19 -05:00
fixoid
c2321b1cdd Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER 2017-05-16 19:25:17 -05:00
Scott Lahteine
238fb53617 Patch home_all_axes to ignore G28 XYZ parameters 2017-05-16 16:18:38 -05:00
Scott Lahteine
6b6630e11b Clean up trailing whitespace and tabs 2017-05-16 16:06:18 -05:00
Roxy-3D
d30e478f97 Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761) 2017-05-16 15:24:24 -05:00
oldmcg
5a9e52a3e0 Use COPY_XYZE macro to copy exactly 4 elements (#6758)
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
2017-05-16 11:47:51 -05:00
Roxy-3D
8606644343 M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757)
* Fix M48 for Delta's  There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.

* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo
0cd398c25d UBL Menu Updates (#6751)
Things should be pretty stable for a while.   
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Johann Delahayes
a5737cba7c Update french language 2017-05-16 12:27:42 +02:00
Scott Lahteine
0fef9a2983 Remove "ubl." prefix from calls within ubl method 2017-05-16 01:19:45 -05:00
Scott Lahteine
14a4257c7b UBL tabs, whitespace, spelling, etc. 2017-05-16 01:19:45 -05:00
Scott Lahteine
56e2e331ed UBL G29: replace 'O' with 'T'
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine
091f94a6bf Fix up M421 and some comments 2017-05-16 01:14:03 -05:00
Scott Lahteine
4ec4ecff1a Reduce find_closest_mesh_point_of_type a little 2017-05-16 01:14:03 -05:00
Scott Lahteine
f1a1c6873e Patch lcd_implementation_status_screen compiler warning 2017-05-16 00:59:50 -05:00
moebyusDev
2266c0780d fixed spanish lang
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
2017-05-16 00:35:36 -05:00
oldmcg
b213a45efb UBL_DELTA post merge cleanup (#6705)
* UBL_DELTA post merge cleanup:
   fix fade_height, lost during some previous merge
   fix float cx,cy which are not const
   move repeated z_cxcy calc line inside loop
   style fixes and comment fixes/alignment

* Update ubl_motion.cpp

remove unnecessary parentheses

* Update Conditionals_post.h

Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
2017-05-16 00:30:29 -05:00
Roxy-3D
6f86c46fa6 Fix typo that caused scope issues for DELTA (#6750) 2017-05-15 23:13:45 -05:00
Roxy-3D
1fbcbc05f6 UBL no longer flout's the sacred GCode standard (#6745)
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine
c262ea92e0 Merge pull request #6733 from abusca/Euskera
Updated Basque translation
2017-05-15 02:30:11 -05:00
Scott Lahteine
267f77b18b More constraint on axis_unhomed_error 2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a Updated Basque translation
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23 Update the gMax files to display better with Proportional Fonts (#6727)
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87 G26's default behaviour ought to be the entire mesh (#6726)
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.

It is more natural for the unsophisticated user to just do the entire mesh (bed).   We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0 Setup FolgerTech-i3-2020 files better for the user (#6724)
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine.  But we want it 'Right'.

Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332 Update M665 comment, fix M665 code_value code. 2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5 Fix prepare_move_to_destination_cartesian for UBL 2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d Use GRID_MAX_POINTS. Some formatting 2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db Merge pull request #6699 from mtowara/patch-1
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7 Fix #6691 - redundant line in M665 2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a Bugfix PRINTER_EVENT_LEDS
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0 Add disclaimer for verboten parameters 2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470 Cleanups to UBL_DELTA 2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522 M421 tweaks, just to use const 2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6 Define GRID_MAX_POINTS 2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd Apply const in Marlin_main.cpp 2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906 Add some GCodes to the header of Marlin_main.cpp 2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c Tweak M80/M81 descriptions 2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3 Adjust G26 arguments 2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73 Fix a spelling boo 2017-05-12 01:32:33 -05:00
oldmcg
91841d75c9 UBL_DELTA (#6695)
UBL on Delta's....     Should be close!    Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort
445003dbb8 Merge pull request #6694 from bgort/g29p2b
UBL:  Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian
5a5dba6fc8 UBL: Minor improvement to G29 P2
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian
ae676490c9 M421: Add 'adjust closest point' capability
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456 Merge pull request #6682 from thinkyhead/bf_M80_s_arg
"M80 S" to report the state of the PSU pin
2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309 M421 Mesh Point Offset and misc. UBL clean up (#6685)
* M421 Mesh Point Offset and misc. UBL clean up

Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.

* Better error checking for M421

* Fix M421 Y index bug

I just noticed....  We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31 "M80 S" to report the state of the PSU pin 2017-05-10 17:58:58 -05:00
bgort
df42428281 Merge pull request #6665 from bgort/font
Add proportional font adjustment ratio
2017-05-10 17:30:51 -04:00
Brian
2604742191 Add proportional font adjustment ratio
- update example configs
2017-05-10 17:19:03 -04:00
bgort
b3407a371b Merge pull request #6676 from bgort/g26zhop
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 17:12:05 -04:00
bgort
c33d99c5b2 Merge pull request #6680 from bgort/g26repeat
G26:  Add 'Repeat' Option
2017-05-10 17:11:34 -04:00
Bob-the-Kuhn
7325035aac Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
UBL Menu System 1.1
2017-05-10 15:54:48 -05:00
Brian
f7a201b0d0 G26: Add 'Repeat' Option
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
2017-05-10 16:52:08 -04:00
Brian
9c5957fc77 G26: Add 0.5mm Z-bump between circles to minimize pattern scraping 2017-05-10 16:11:59 -04:00
Brian
4da14b14f4 UBL Cleanup/Bugfix
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
2017-05-10 13:56:17 -04:00
Tannoo
66db6c3acc UBL Menu System 1.1
/**
     * UBL System submenu
     *
     *  Prepare
     * - Unified Bed Leveling
     *   - Activate UBL
     *   - Deactivate UBL
     *   - Mesh Storage
     *       Memory Slot:
     *       Load Bed Mesh
     *       Save Bed Mesh
     *   - Output Map
     *       Map Type:
     *       Output Bed Mesh Host / Output Bed Mesh CSV
     *   - UBL Tools
     *     - Build Mesh
     *         Build PLA Mesh
     *         Build ABS Mesh
     *       - Build Custom Mesh
     *           Hotend Temp:
     *           Bed Temp:
     *           Build Custom Mesh
     *         Info Screen
     *       - Build Cold Mesh
     *       - Fill-in Mesh
     *           Fill-in Mesh
     *           Smart Fill-in
     *           Manual Fill-in
     *           Info Screen
     *         Continue Bed Mesh
     *         Invalidate All
     *         Invalidate Closest
     *     - Validate Mesh
     *         PLA Mesh Validation
     *         ABS Mesh Validation
     *       - Custom Mesh Validation
     *           Hotend Temp:
     *           Bed Temp:
     *           Validate Mesh
     *         Info Screen
     *     - Edit Mesh
     *         Fine Tune All
     *         Fine Tune Closest
     *       - Adjust Mesh Height
     *           Height Amount:
     *           Adjust Mesh Height
     *         Info Screen
     *     - Mesh Leveling
     *         3-Point Mesh Leveling
     *       - Grid Mesh Leveling
     *           Side points:
     *           Level Mesh
     *         Info Screen
     *   - Output UBL Info
     */
2017-05-10 12:14:43 -05:00
Brian
3b0127cf8e Fix compiler complaint related to M100 2017-05-09 21:45:44 -04:00
Scott Lahteine
11104f177b Apply const in BABYSTEPPING 2017-05-09 12:37:23 -05:00
Scott Lahteine
081bf1f879 Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
Scott Lahteine
a9487c9443 Reduce redundancy in BLTOUCH conditionals 2017-05-09 11:52:24 -05:00
Scott Lahteine
8d961b51cc Eliminate M100 compiler warnings? 2017-05-09 11:32:15 -05:00
bgort
efb9ce24d9 Merge pull request #6645 from tcm0116/bltouch_config
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-09 09:49:16 -04:00
bgort
e2f07917ab Merge pull request #6644 from tcm0116/bltouch_menu
Move BLTouch LCD menu from Main to Main/Control
2017-05-09 09:49:02 -04:00
Florian Heilmann
fe96376a73 Fix FWRetract with positive z-moves during retracted state 2017-05-09 13:54:57 +02:00
Scott Lahteine
47cae2929f Patch platformio.ini to fix build error in DevIoT
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
911a87e006 Disable SCARA feedrate scaling by default 2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3 Cleanups following recent commits 2017-05-08 14:23:01 -05:00
Scott Lahteine
dca48f0e63 Move platformio.ini back to Marlin folder - it works there 2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e Small reduction in error code size 2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2 Cleanup to software PWM variables 2017-05-08 13:51:45 -05:00
Thomas Moore
a20d0794e6 Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch 2017-05-08 16:28:44 +00:00
Thomas Moore
3279337f47 Move BLTouch LCD menu from Main to Main/Control 2017-05-08 15:21:01 +00:00
Brian
6cb0fa4128 Cleanup previous implementation of new quiet probing
Saves a few lines of code.
2017-05-08 08:13:46 -04:00
bgort
4b7f8ad9c6 Merge pull request #6610 from bgort/pio-improvements2
PlatformIO-related changes
2017-05-08 07:52:42 -04:00
Scott Lahteine
56ca47ab9d Patch configuration temp units 2017-05-07 21:32:01 -05:00
Scott Lahteine
421dd62800 Adjust spacing of "spaces" 2017-05-07 21:28:54 -05:00
Scott Lahteine
26dba44cd3 Patch redundant lcd settings 2017-05-07 21:28:54 -05:00
Scott Lahteine
34b5041576 Spacing adjustment, ubl_G29 2017-05-07 21:28:54 -05:00
Scott Lahteine
1c4ed8b106 Note 5 extruders in config comments 2017-05-07 21:28:54 -05:00
Scott Lahteine
6e4a5cc8c6 Patch missing const in temp_abs 2017-05-07 21:13:44 -05:00
bgort
d35e2fda10 Merge pull request #6622 from bgort/silentprobing
Improve BLTOUCH_HEATERS_OFF functionality
2017-05-07 21:33:44 -04:00
Scott Lahteine
6ed52fb765 Adjust spacing in LSF 2017-05-07 19:11:52 -05:00
Roxy-3D
110afff415 More misc UBL fixes and update gMax examples (#6632)
I think I forgot to Sync before I committed last time.   Some UBL
changes did not stick.

Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
2017-05-07 19:02:24 -05:00
Roxy-3D
d92fa40c62 misc. UBL fixes (#6631)
* Restore LSF functionality

Some of the typo's persisted...   Hopefully this gets them all fixed.

* Restore user's expectations of how G28 should behave

* Allow Nozzle size control with ornery host programs
2017-05-07 18:23:48 -05:00
Brian
faa270071d Improve BLTOUCH_HEATERS_OFF functionality
- rename to PROBING_HEATERS_OFF
 - move heater pausing functionality into thermalManager
   - add variables, pause(), ispaused(), other functions
 - add fan pausing functionality -> PROBING_FANS_OFF
 - add probing_pause() wrapper
 - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
 - example configs
2017-05-07 16:22:08 -04:00
lrpirlet
d66e9efac5 G29 P1 stops reporting Invalid location with this patch 2017-05-07 15:07:26 +02:00
Scott Lahteine
ce507deb9f Support temperature units in M503 2017-05-06 20:24:51 -05:00
bgort
a59066bca9 Various improvements - mostly UBL-related (#6607)
UBL Clean up.
2017-05-06 18:59:16 -05:00
Brian
0446dd3ad8 PlatformIO-related changes
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
  - facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
Scott Lahteine
77769e284f Edit configuration comments 2017-05-05 13:32:31 -05:00
Scott Lahteine
6876e79d42 Tweak command index increment 2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424 Minor fix in K8200 readme 2017-05-05 11:25:11 -05:00
Max Matveev
267f3a03d9 Fixed USE_CONTROLLER_FAN #define usage 2017-05-04 23:38:29 +02:00
bgort
ae7c602031 fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F (#6584)
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
2017-05-04 16:09:45 -05:00
Scott Lahteine
3cd9af2409 bugfix-1.1.x ReadMe, Version, helper scripts 2017-05-04 07:17:10 -05:00
Florian Heilmann
15268770f5 Fix broken fwretract recovery extruder feedrate
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering. 
Performing the two moves separately from each other ensures a correct recovery feedrate.
2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19 Merge pull request #6568 from thinkyhead/rc_bilinear_extension
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling 2017-05-04 00:19:07 -05:00
Scott Lahteine
6834e36871 Merge pull request #6567 from thinkyhead/rc_sdcard_stop
Shutdown heaters, autotemp on SD Cancel
2017-05-03 23:54:29 -05:00
Scott Lahteine
399efd66ed Click to resume 2017-05-03 22:26:06 -05:00
Scott Lahteine
1196e3ca59 SDCard print completion can use "M0" 2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22 Shut down autotemp in disable_all_heaters 2017-05-03 20:54:26 -05:00
Thomas Moore
acec237092 Shutdown heaters and fan after canceling a print from the SD card 2017-05-03 20:43:09 -05:00
Scott Lahteine
11b6a3cbb6 Fix regression in least_squares_fit.cpp 2017-05-03 19:21:44 -05:00
Scott Lahteine
e1b85ff67b Merge pull request #6559 from thinkyhead/rc_more_optimal
Compact smart_fill_mesh slightly
2017-05-03 19:07:36 -05:00
Scott Lahteine
9890141f7b M100 tweak 2017-05-03 17:28:09 -05:00
Scott Lahteine
2658cc707a Treat temperature as integer, when possible 2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a Make G26 compatible with inches and thermal unit modes 2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65 Dress up Bilinear Leveling code 2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4 Patch issue in gcode_M900
Noted in #6550
2017-05-03 15:26:00 -05:00
Scott Lahteine
de5e485ed7 Explicit upward angle solution 2017-05-03 01:19:44 -05:00
Scott Lahteine
ecdf68735f Compact smart_fill_mesh slightly 2017-05-03 01:06:58 -05:00
Scott Lahteine
628391304f Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9 Merge pull request #6556 from thinkyhead/rc_use_controller_fan
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73 Drop extra parens from address-of operator 2017-05-02 22:22:23 -05:00
Scott Lahteine
0bf5add075 Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits 2017-05-02 22:22:23 -05:00
Scott Lahteine
b8ba3b7647 Use 'sq' macro where possible 2017-05-02 22:22:23 -05:00
Scott Lahteine
66eba3346b Remove G29 lcd control debugging 2017-05-02 22:22:23 -05:00
Scott Lahteine
3517154135 Reduce code size, fix bug in smart_fill_mesh 2017-05-02 22:22:23 -05:00
Scott Lahteine
c4e34adcf1 Apply formatting, coding standards to UBL 2017-05-02 22:22:23 -05:00
Scott Lahteine
f4239e62b1 Merge pull request #6557 from thinkyhead/rc_hotend_status_item
Keep refreshing LCD if hotend status is on-screen
2017-05-02 22:04:21 -05:00
Scott Lahteine
fc857c5b78 Merge pull request #6549 from thinkyhead/rc_bltouch_refix
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 21:53:09 -05:00
Thomas Moore
b39f634252 Continuously update LCD when hotend status is displayed in Filament Change screens 2017-05-02 21:49:40 -05:00
Scott Lahteine
2c13922c46 Implement USE_CONTROLLER_FAN as a feature 2017-05-02 20:18:52 -05:00
Scott Lahteine
492bc536bf Modify debug methods to take PSTR 2017-05-02 17:53:40 -05:00
Bob-the-Kuhn
e5a27d9f36 G29 P2 & P4 bug fixes & improvements 2017-05-02 17:53:40 -05:00
Scott Lahteine
b93be716cf Remove trailing whitespace 2017-05-02 17:53:40 -05:00
Scott Lahteine
76eca9732d Fix mis-named language string define in Dutch 2017-05-02 16:08:09 -05:00
Scott Lahteine
806f670092 Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
UBL: G26 minor improvements
2017-05-02 16:06:22 -05:00
Scott Lahteine
0803c9d997 Merge pull request #6533 from thinkyhead/rc_autocal_patches
General cleanup of G33
2017-05-02 16:01:02 -05:00
Brian
ff5fed137f Fix BLTOUCH_HEATERS_OFF bug 2017-05-02 15:53:52 -05:00
Scott Lahteine
ca1dd739a3 Organize ubl.h defines by the files they serve 2017-05-02 15:47:06 -05:00
Scott Lahteine
0449f69179 Cleanup patch to recent merge 2017-05-02 15:47:06 -05:00
LVD-AC
da2abad636 Various cleanups of G33
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
2017-05-02 15:47:06 -05:00
Bob-the-Kuhn
7ce613db0a Fix Conditionals test for endstop plug used by Z2 or probe. 2017-05-02 15:41:47 -05:00
Scott Lahteine
ef750ae86b Towards supporting Z2 in Endstops::report_state 2017-05-02 15:39:32 -05:00
Scott Lahteine
c03c623951 Sanity-check Z2 endstop assigned to a nonexistent pin. 2017-05-02 15:39:00 -05:00
Scott Lahteine
70f31b6c76 Throw an error if no E stepper is free for X2, Y2, Z2 2017-05-02 15:13:47 -05:00
Scott Lahteine
ac69eca586 Merge pull request #6538 from bgort/ubl_gridlbls
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1 Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c Fix Horizontal and Vertical UBL optimization bug. (#6540)
* Fix Horizontal and Vertical optimization bug.

And drastically reduce the debug code foot print....

* Yeah Baby!

The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367 Patches for leveling reactivation in G28 / M48 2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2 Fix, cleanup, prettify G29 O output 2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7 Tweak set_bed_leveling_enabled 2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3 Adjust leveling conditionals 2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce Clean up G26 external references, private vars 2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788 Add a function to home all axes (i.e., gcode_G28) 2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01 Merge pull request #6530 from thinkyhead/rc_cleanups_2
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938 Fixes for DUAL_NOZZLE_DUPLICATION_MODE 2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966 Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
4803a4322e Revert "Fix for Meshpositions if printer has negative endstop positions" 2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4 Patch for BLTOUCH_HEATERS_OFF 2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29 Patch for missing DELTA_HEIGHT 2017-05-01 11:05:35 -05:00
Scott Lahteine
d814e468d2 Fix set_heaters_for_bltouch and usage
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a Various fixes for compiler warnings
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749 Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59 cardreader.cpp spacing tweak 2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f Cleanup spacing in pinsDebug.h 2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717 Remove things that aren't pins from pinsDebug_list.h 2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08 Resolve compiler complaint about memset volatile * 2017-04-30 22:24:03 -05:00
Scott Lahteine
0b421e97c9 Rename some (unused) OMCA pins 2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e Patch newly-introduced bug in IS_Z2_OR_PROBE 2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d Cleanups to pins debugging 2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f Use new serial spacing function to save PROGMEM 2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7 Cleanups to UBL code 2017-04-30 20:14:42 -05:00
Bob-the-Kuhn
ce87c7803e implement G26 changes per review 2017-04-30 19:05:25 -05:00
jaysonkelly
769817ce5e Need to define this for Rigidboard V2
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b Merge pull request #6416 from SkyNet3D/negative-mesh-fix
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a Merge pull request #6509 from thinkyhead/rc_config_patches
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE 2017-04-30 16:01:01 -05:00
Bob-the-Kuhn
dcde202157 Add startup notice & update host temperatures while waiting
Right now G26 doesn't send a notice to the host that it's running.  It's
not until the heaters are at temperature that you know for sure if it's
running or not.

Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
2017-04-30 15:51:58 -05:00
Scott Lahteine
54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6 Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1 Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507) 2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604 Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc Merge pull request #6508 from bgort/pio_improvements
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8 little oops 2017-04-30 22:17:49 +03:00
Brian
627730948d Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168 change G26 default nozzle size to 0.4, consistent with instructions (#6506) 2017-04-30 13:23:46 -05:00
LVD-AC
471a321624 leaner code for probe routine 2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1 allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505) 2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a Correct over optimization of pre-initialized variables (#6500)
* Correct over optimization of pre-initialized variables

NEAR_ZERO() works most of the time...  But it leaves corner cases
uncovered.  We need to explicitly check if these variables are +/-
infinity.

* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617 Initial patches to G33 2017-04-29 15:29:49 +03:00
Scott Lahteine
12ce051b55 Add a function to output spaces to serial 2017-04-29 15:29:49 +03:00
Scott Lahteine
42f4c53254 Starting on G33 rewrite 2017-04-29 15:29:49 +03:00
Scott Lahteine
baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
emartinez167
27cd165adf Last three Spanish language strings
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine
2cc9774f34 Apply bltouch_menu
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine
1a111180de Clean up set_heaters_for_bltouch 2017-04-28 18:32:39 -05:00
Scott Lahteine
7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Scott Lahteine
8bf3a3fcdb Remove inaccurate comments from ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine
47557d5a19 Fix up formatting in ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine
0a8e09c723 Clean up excess whitespace, comment formatting 2017-04-28 18:32:38 -05:00
Scott Lahteine
a35c681453 Clean up least_squares_fit 2017-04-28 17:33:28 -05:00
Bob-the-Kuhn
40089249c3 add PIN_EXISTS to HAS_xyz_MIN macro 2017-04-28 16:47:59 -05:00
Scott Lahteine
8020069371 Apply coding standards for indentation 2017-04-28 15:43:06 -05:00
Scott Lahteine
dabca83742 Merge pull request #6437 from Kaibob2/patch-1
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai
3d0a4c4ea9 Update language_de.h 2017-04-28 21:09:10 +02:00
Silvio
6bf1d50188 Added missing translations (#6458) 2017-04-28 13:49:16 -05:00
Mehmet Sutas
404f767d44 Update language_tr.h (#6463) 2017-04-28 13:48:31 -05:00
Petr Zahradnik
5e701524f8 Update language_cz.h for new translations (#6465)
* Update language_cz.h for new translations

* Correction translate

* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b
0a92ce7a98 Completed french translation (#6475) 2017-04-28 13:46:09 -05:00
Ernesto Martinez
ff4fb42e7d Add new strings as per recent changes in RCBugFix (#6482)
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus
67d1fc5556 Update language_nl.h (#6478)
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye
8c6b4537a6 Fix issue in itostr4sign with numbers <100 (#6487)
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC
4ea8d0f89b Solved "The Travis CI build failed " 2017-04-28 19:55:21 +03:00
LVD-AC
ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
LVD-AC
7a6a1ef583 M666 normalize positive values to <=0
M666

+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a Shut down heaters during BL-Touch probe event
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users.   This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.

Because this code is messing with the heaters, it is written in a
paranoid manner.  It only turns the heaters back on if everything is
EXACTLY as it expects things to be.  The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.

This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC
d8102aeca8 Cn negative : no tower angle calibration
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)

EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D
3601f08e87 Better tuned FolgerTech i3-2020 example file 2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581 Better tuned Example file for FolgerTech i3-2020
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai
bf2fe46062 Update language_de.h 2017-04-27 10:13:02 +02:00
Kai
11d34be060 Update language_de.h 2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4 Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af Get example files fully into compliance
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc z_offset change
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e Add my two 'Nice' machines as example configurations
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592 Fix stuck "Print Aborted" LCD message
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102 Minor optimization of FILAMENT_WIDTH_SENSOR 2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Kai
38ae7f4238 Added more translation strings
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1 Bootscreen delay after clear, then set chars
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c Only set Compare Mode for channel A
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679 Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
Also...   The memory corruption issue may be fixed.   The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a Fix up XYZ_CONSTS_FROM_CONFIG macro 2017-04-24 14:05:11 -05:00
Kai
03c2f756b9 Update language_de.h 2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Brian
f41fb2b635 Numerous UBL-related changes:
* relocated ubl state to config. store:
 * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
 * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
 * removed pre_initialized state, saving 64 bytes of SRAM;
 * removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Brian
f1a4758cef use progmem instead of sram for mesh_index_to_x/ypos array;
fix maximum mesh_index_ array size at 16 (15+1);
2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a Optimize number-to-string functions, no-fan display 2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13 Spend some SRAM to optimize bilinear leveling 2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960 bed_level_grid => z_values (also *_virt array) 2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3 Add a method to refresh bilinear bed level after a change 2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5 Fix a pair of compiler complaints 2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
android444
77aa16005d Polish font
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e Delta probe height bug solved 2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d Fix for Meshpositions if printer has negative endstop positions 2017-04-22 00:16:16 +02:00
benlye
3ed737425d Fix typo in new SET_COM macro 2017-04-21 15:08:18 -05:00
Brian
88649b06a6 use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height 2017-04-21 09:09:09 -05:00
LVD-AC
004928148c Tower angles
Adding '7-point' tower angle correction calibration
2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80 Adding upto 7*7 probe grids
- adding Cn 5, 6 and 7
2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200 Delete 'expert level'
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's)
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8 Clean up trailing whitespace 2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5 Fix compiler type conversion errors after LCD changes 2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610 Merge pull request #6367 from thinkyhead/rc_cleanup_followup
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91 Merge pull request #6382 from MagoKimbra/fix_configuration_store
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae Replace c_assert hack with static_assert 2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790 Clear up G29 compiler warnings 2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0 Apply const, spacing to Marlin_main.cpp 2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1 Cleanup of pins testing code 2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c Cleanup after some direct commits
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e Add hex routine to print an address 2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e Fix broken TOGGLE macro in fastio.h 2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14 Fix double definition in configuration_store 2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d Clean up and organize ultralcd.cpp 2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f MSG_VOLUMETRIC => MSG_FILAMENT 2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545 Add Linear Advance values to EEPROM and enable configuration of K via LCD 2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae Add M905 R for setting the E/D ratio directly 2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84 Use code_value_linear_units for known-linear axes 2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b Show M503 report with current linear units 2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb Merge pull request #6373 from mtowara/mt_makefile_fix
Fix Makefile build
2017-04-17 16:16:37 -05:00
towara
150b15c311 fix compiler errors generated by more stringent flags in Makefile:
- use volatile for registers
- avoid implicit casts
2017-04-17 11:59:47 +02:00
towara
f6095c9325 fix missing serial.cpp in Makefile 2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c Tweak headings in EEPROM structure 2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a Merge pull request #6362 from tcm0116/babystepping
Only queue babysteps if axis is in a known position
2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68 Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly. 2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461 Only queue babysteps if axis is in a known position 2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f Setup to find data corruption and general clean up
This data corruption problem is very difficult.  Just changing the code
a little bit changes whether the problem even happens and what is
affected.  I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.

Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected.   M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953 Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680 Show Cancel/Continue screen for ABL "Level Bed" 2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8 Merge pull request #6353 from thinkyhead/rc_endstop_coolness
Clean up endstop triggering code
2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990 Merge pull request #6342 from benlye/benlye-fix-softspi
Fix softspi variant conditional for 1284p
2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18 Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68 Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined 2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4 Make spi.h inclusion conditional
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592 minor improvements
Configuration_store.cpp - changed a couple of print statements so the
values were printed.  The old method resulted in the formula being
printed.

ubl_G29
1) added support for R option to P4.  Now probes all points unless R is
present and the number is greater than 0.

2) P2 - moved map print statement so it showed the point that was
currently being probed,  The old location did this only for the first
point.

3) P4 - Moved the map print for the same reason.

ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061 Improve motion-based endstop triggering code 2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825 Fix compiler warning about z-offset callback 2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26 Reverse bools on prepare_move sub-functions 2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806 Extra logging of Dual X modes 2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92 Cleanup, extend TMC2130 implementation 2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378 Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02 fix 1 bug, add error messages
===============================================

make changes requested by reviewers

===============================================

add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873 Implement delta auto-calibration and delta_height 2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046 Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9 Allow faux leveling 2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11 Merge pull request #6346 from thinkyhead/rc_broken_abl_test
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7 Reorder Conditionals_post.h and add comments 2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0 Patch to init W with RGBW_LED 2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0 Never define SLED_PIN 2017-04-14 16:36:32 -05:00
benlye
1a447d0047 Fix variant conditional for 1284p 2017-04-14 18:46:09 +01:00
benlye
1f9ee42750 Fix lcd_babystep_zoffset()
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a CORExx endstop detection fixes
1. The CORExx printers were checking more endstop axis than needed.

2. Removed all the CORE_xx_NOT logic.  The motor_direction(xx) routine
always returns the correct data so it is not needed.  It was actually
cause the wrong direction to be checked in some cases.

3. Made the logic/defines for X, Y & Z axis all the same.  The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.

4. Added a check for zero steps before the X, Y & Z axis.  Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92 M100 Fixes and Features
All the memory accesses need to be unsigned char in  order to avoid
false errors being detected.   Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916 Movement/adjustment should be reverse of probe offset change 2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389 Merge pull request #6330 from thinkyhead/rc_improvements
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0 Sanity check per-axis settings for size 2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9 Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0 Merge pull request #6325 from thinkyhead/rc_M20_with_size
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa simplified M20 with size 2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db Merge pull request #6315 from thinkyhead/rc_unify_M421
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354 Merge pull request #6306 from thinkyhead/cleanup_after_6302
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651 Unify M421 2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31 Merge pull request #6240 from thinkyhead/rebuild_rgb_led
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c theTarget => target_temp 2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade Add HAS_RESUME_CONTINUE shorthand macro 2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37 2 is DXC_DUPLICATION_MODE 2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54 Use multiply for delta probe constraint 2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a Merge pull request #6313 from Kaibob2/patch-10
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255 Allow 10mm Movements for Z-Axis
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044 Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371 Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a Have M109 / M190 do nothing with no parameters 2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6 Only lcd_synchronize needs no_reentry 2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10 Merge pull request #6297 from Kaibob2/patch-9
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0 Fix M100 Free Memory Checker
M100 had numerious changes and quit working.   Part of the problem is
the overloading of the SERIAL_PROTOCOL functions.   Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number.     M100 is working again.   Let's keep it that way!

M100 has been expanded to now have a function  int
free_memory_is_corrupted()  that can be called from other code to see if
the free space is still contiguous.  It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted()  is doing the right thing
and what it found at various points when it was called.     A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9 Missing semicolon in ultralcd.cpp
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867 Fix mbl_mesh_report 2017-04-10 20:50:19 +02:00
Kai
afeb0452ef Fix EPROM -> EEPROM
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0 Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24 Convert config code to a static class 2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78 Added z_fade_height to EEPROM-Settings
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6 Merge pull request #6284 from thinkyhead/rc_wt150_rebase
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b Fixed comparison of float values to NaN 2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530 Patch a display issue with LCD_DECIMAL_SMALL_XY
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090 Merge pull request #6213 from thinkyhead/rc_gitattributes
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5 Toggle with XOR 2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00 Init bed_level_virt_interpolate on EEPROM load 2017-04-09 07:04:20 -05:00
MD
20dd5376b8 Cheaptronic V2
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6 Allow boards without a thermistor 2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66 Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors. 2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7 Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller 2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18 Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE 2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1 Add software spi support for max6675 2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f Add digipot i2c control for MCP4018 2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb Update TinyBoy2 configurations 2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b Macros to print floats, hiding imprecision 2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239 Merge pull request #6278 from thinkyhead/pr_delta_angles
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586 Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351 Cleanup following Pins Debug update 2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b Formatting / cleanup 2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257 Support 5 extruder auto fans 2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd General comment cleanup 2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839 Drop extraneous calls to lcd_update 2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03 patch "step_remaining" 2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187 Use LCD_MESSAGEPGM over lcd_setstatuspgm 2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e Set and check main parameter values, report all errors 2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1 These items were removed from the UBL Command Parsing
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee Patches to UBL 2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8 Getting setup for debugging 2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3 Finish name change
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2 Implementation changes to support 5 extruders 2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0 Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1 Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1 Fix HOTEND_STATUS_ITEM for graphical display 2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2 Merge pull request #6258 from benlye/benlye-bilinearfix2
Better fix for bilinear Z offset and G29 Z (update to #6251)
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5 eleminate bootscreen.h 2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e Update ubl.h 2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b get synchronized to current file names 2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf UBL's Grid Based Leveling code
Pretty much...  The code is in place.  Still more work to do.    But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2 Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
Another BLTouch retry place (replaces PR #6108)
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12 Merge pull request #5676 from Bob-the-Kuhn/configuration.h
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6 # This is a combination of 2 commits.
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1 add BLTouch retry to a second place & add/update delays
=================================================

implement requested changes

=================================================

remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9 Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
M43 - add Toggle utility and Z servo utility (replaces PR #5864)
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09 improved wording, consolidation of info, BLTouch warning
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0 pinsDebug with more features, uses less RAM
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.

Includes support for 1284 & 1286 families.

Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
.           without   52576
.           with new  64592
.           with old  62826
.           new-out   12016
.           old-out   10250
.           new-old   1766
.
RAM
.           without   2807
.           with new  2875
.           with old  3545
.           new-out   68
.           old-out   738
.           new-old   -670

==================================================================

minor changes - mostly formatting

1) added newline to end of teensyduino file

2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE.  Got warnings
about redefining TEENSYDUINO

3) removed some trailing spaces

reduce PROGMEM size & update pin list

Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function

This required creating two arrays of address pointers for the PWM
registers.

==================================================================

update with new M3, M4, M5 pin names

==================================================================

report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b Adjust indentation in ubl.h 2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5 Rename all UBL files with a ubl_ prefix 2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c add Z servo test and toggle pins to M43 2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7 pinsDebug with more features, uses less RAM
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.

Includes support for 1284 & 1286 families.

Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
.           without   52576
.           with new  64592
.           with old  62826
.           new-out   12016
.           old-out   10250
.           new-old   1766
.
RAM
.           without   2807
.           with new  2875
.           with old  3545
.           new-out   68
.           old-out   738
.           new-old   -670

==================================================================

minor changes - mostly formatting

1) added newline to end of teensyduino file

2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE.  Got warnings
about redefining TEENSYDUINO

3) removed some trailing spaces

reduce PROGMEM size & update pin list

Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function

This required creating two arrays of address pointers for the PWM
registers.

==================================================================

update with new M3, M4, M5 pin names

==================================================================

report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a Adjust indentation in ubl.h 2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771 Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc Fixing bilinear Z offset and G29 Z
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling.  This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d Add hidden option to output Bilinear grids in JSON 2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd Reduce M420 code for UBL slightly 2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03 Add LEVELING_DATA as a capability 2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486 Fix bilinear levelling z offset
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce Fix broken M206/M428/G92 offsets 2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5 Fix spelling mistake when UBL's mesh is Inactive 2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42 Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc Merge pull request #6209 from thinkyhead/rc_psu_zero
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f Fix problem described in issue # 6175
As it turns out...   an unsigned int can not go to less than 0,  so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844 Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b Fix line-endings in UBL_G29 2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2 Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9 Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962 Fix LCD preheat menus 2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3 Prevent a warning on echo_command 2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e Fix formatting, order for a UBL change 2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad Power Supply 0 as "General" 2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70 can wstring be removed? 2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73 Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46 Indent MarlinSerial code 2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5 status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228 Use PSTR versions of lcd_status... to save SRAM 2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b Apply const args, clean up find_closest_circle_to_print 2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce Minor spelling patch 2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c Remove extraneous check of UBL_G26_MESH_EDITING 2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0 Fix logic of UBL::fade_scaling_factor_for_z 2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac Revert behavior of enqueue_and_echo_commands_P 2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1 Syntax cleanup 2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37 Revert some changes to UBL 2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787 add delays to allow stop & kill messages to get out 2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146 Update description of PINS_DEBUGGING 2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d Implement LCD_BED_LEVELING for PROBE_MANUALLY 2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a Implement the "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878 Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f Within applied to UBL 2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae Additional UBL fixes, optimizations 2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea Have run_probe() return probe Z, not nozzle Z 2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56 Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb MBL fiddle 2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1 Clean up code, remove _now command function 2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81 Add example configuration for TinyBoy L10/L16
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba Make G26 compatible with G92 and M206 2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95 More data in UBL class, make it a static class
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5 Further repairs to UBL, comments, spacing 2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337 Reduce UBL RAM usage by making G26/G29 optional 2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7 Make MBL a static class, use lookup for index-to-point conversion 2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3 Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802 Merge pull request #5908 from thinkyhead/rc_fix_slowdown
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb Cleanup to planner.cpp 2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c Marlin: Slight cleanup to Marlin_main.cpp 2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1 Marlin: Temperature soft-PWM cleanup 2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61 Merge pull request #5994 from StefanBruens/fix_Makefile_errors
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03 Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1 Show filament width sensor values in LCD constantly if SD card support is not enabled. 2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178 Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f Tweak "can not" => "can't" in RUMBA pins 2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b Dynamic feedrate on SCARA, converting target mm/s to deg/s 2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546 Get G29's P1 (Automated Probing) working again.
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93 Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e Use safe_delay to ensure watchdog reset 2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7 Make G29 What command print reliably and fix G29 P1 bug Waldo found 2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73 Map clean up of UBL
UBL's maps are cleaner.   And with a 1 value, G29 O 1  will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin 2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a Start of process to get UBL running again.
The wait_for_user change totally broke UBL.   But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f Merge pull request #6111 from benlye/benlye-patch-echo_command
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35 Fix type conversion issue with echo_command
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'".  This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39 Adjust bilinear grid in M851 2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73 Merge pull request #6074 from thinkyhead/rc_immediate_shove
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881 Add SOFT_PWM_DITHER to other configurations 2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78 Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b Use "& 0x3F" instead of "% 64" 2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967 SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1 soft_pwm: avoid useless refetches of pwm_count
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757 SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.

This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955 temperature: Fix SOFT_PWM off by one
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2 Patches to bring UBL closer to compliance 2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604 Apply some general cleanup to code 2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a Reduce STEP_PULSE_CYCLES code slightly 2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05 Adjust vector_3 code with const, some optimization 2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb The hex nibble routine can print again!
The code to print a hex nibble got broke.   SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b Get UBL up and running again
All the changes to get the code into compliance with Marlin coding
standards made UBL sick.   This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option 2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956 Merge pull request #6088 from rafaljot/patch-3
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9 Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic 2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97 G38 optional double touch
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c UBL patch from Bob-the-Kuhn 2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447 Protect Babystepping against other ISRs
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc Add MINIMUM_STEPPER_PULSE ability to babystepping 2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0 Update Marlin_main.cpp
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66 Make G29's Interactive Mesh Editor Work 2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f Get G29's Interactive Mesh Editor running
G29 P4 R O  should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec Spelling fix 2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05 Merge pull request #6052 from thinkyhead/rc_lift_on_pause
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91 Immediate commands take precedence 2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2 Allow FWRETRACT with UBL Enabled
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.

All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47 Allow G29 P1 R to generate the mesh
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7 PARK_HEAD_ON_PAUSE implementation 2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d Add PARK_HEAD_ON_PAUSE feature 2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3 Use XYZE rather than NUM_AXIS 2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a Add disable_e_steppers function 2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6 Patch filament change options and beep code 2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b Merge pull request #6066 from thinkyhead/rc_felix_fix
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e Update Felix config for UBL 2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373 Merge pull request #6057 from thinkyhead/rc_followup_6054
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89 Fix Kelvin conversion
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329 Remove Roxy's personal configurations 2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15 Move Allen Key probe definition to the top 2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3 Move menu selection past static items in 1 screen 2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c Merge pull request #6054 from thinkyhead/rc_ubl_renewal
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1 Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148 Patches to work around "register spill" compiler bug 2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382 Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31 Fix single-char echo and pinMode usage 2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736 UBL implementation 2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3 UBL core and support files 2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925 Univeral Bed Leveling - configuration 2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb Merge pull request #6053 from thinkyhead/rc_clean
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924 Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32 Can't use Z fade height with DELTA 2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269 Remove delta interpolation concept 2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5 Remove kinematic optimizations 2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4 _lcd_level_bed_position => manual_probe_index 2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085 Implement soft_endstops_enabled for clamping 2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044 Add HAS_SOFTWARE_ENDSTOPS macro 2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681 Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133 Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42 Remove some extraneous spaces 2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e Improved solution to tool-change bug 2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f Fix stuck CHDK pin as suggested in #6041 2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82 Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629 Simplify some sanity checks with static_assert 2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439 M114 - wait for move completion before reporting position 2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492 Message for every KILL and STOP
No more mystery halts & resets

Moved messages to language.h

Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
Kai
13b44d019b Update language_de.h
Addition of missing strings to match language_en.h
2017-03-15 16:06:52 +01:00
Bob-the-Kuhn
685ed5393a Bug Fix: Switching extruder tool change leaves Z in wrong position
The tool_change function saves the current_position to the destination
array soon after starting.  Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down.  A later
section of tool_change moves the head back to the “original location”
using the destination array.  This later section assumes that the
destination array hasn’t been modified.

The fix is to save the destination Z position and then restore it after
the Z movements have completed.

Going back to using the current_position array for the switching
extruder Z axis moves (and  leaving the destination array untouched)
doesn’t fix the problem.

This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4 which was merged on 10
Oct 2016 as part of PR 4982.

This bug was discovered in Issue 5966.
2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea Merge pull request #6000 from trivalik/NoWorkspaceWarning
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9 Fix BUG set_position_mm
Set postion must have axis and not E_AXIS + active_extruder.
2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42 prevent warning with define of NO_WORKSPACE_OFFSETS 2017-03-09 23:49:57 +01:00
Stefan Brüns
9ba6c051a1 Makefile: add nozzle.cpp too CXXSRC list
The file is required by the optional NOZZLE_PARK_FEATURE.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 03:08:49 +01:00
Stefan Brüns
9cc8d495b8 Makefile: remove no longer existing search paths
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:46:47 +01:00
Stefan Brüns
bf563e62c1 Makefile: add printcounter.cpp too CXXSRC list
The file is required by the optional PRINTCOUNTER feature.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:54 +01:00
Stefan Brüns
ddecc1441d Makefile: Fix linker error
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.

Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
	undefined reference to `__cxa_guard_acquire'
	undefined reference to `__cxa_guard_release'

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:38 +01:00
MagoKimbra
37a26dfc09 Fix delta_angles 2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748 Use SET_INPUT_PULLUP where appropriate 2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878 Use arrays for delta tower parameters 2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb Apply updated changes for delta_tower_angle_trim 2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79 Added support for delta tower angle corrections. 2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a Apply TMC2130 to example configurations 2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833 TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344 Merge pull request #5973 from thinkyhead/rc_circle_pattern
Add circle pattern to nozzle clean
2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483 Merge pull request #5959 from benlye/benlye-fixm48
Remove extra carriage return in M48 V1 output
2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295 Merge pull request #5972 from thinkyhead/rc_cooldown_before
Fix preheat menu formatting
2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9 Patch and clean up "flsun" kossel. Followup to #5911. 2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e Apply prior nozzle clean update 2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea Added circle pattern for nozzle cleaning feature 2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6 Merge pull request #5911 from aphex3k/flsun_kossel_mini
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852 Apply NO_WORKSPACE_OFFSETS to lcd menu 2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d Fix preheat menu formatting 2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f Endstop and temp-isr general cleanup 2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780 Compact some macro substitutions 2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9 Merge pull request #5970 from thinkyhead/rc_cooldown_before
Preheat Hotend Only menu items
2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18 Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
Stepper indirection fix tmc driver
2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c Menu item to preheat only the hotend 2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae Move Change Filament above Cooldown 2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e Move Cooldown above Preheat 2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a Merge pull request #5971 from thinkyhead/rc_fix_e_factors
Patch DISTINCT_E_FACTORS bug
2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573 Patch DISTINCT_E_FACTORS bug 2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674 Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
New option: NO_WORKSPACE_OFFSETS
2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7 Document PROTOCOL_VERSION 2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd Use a macro for array copies 2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f Optimize coordinate transformation
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b Implement NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9 New option: NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32 Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
Display a message for EEPROM version mismatch
2017-03-04 17:15:07 -06:00
benlye
dead89062a Update Marlin_main.cpp
Remove unnecessary line break from M48 V1 output.
2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6 Stepper indirection fix tmc driver 2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995 Display a message for EEPROM version mismatch 2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6 Merge pull request #5953 from thinkyhead/fix_fc_e_index
Fix submenu hotend status display
2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c Fix submenu hotend status display 2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51 Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
Fix MAKRPANEL assignments
2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919 Merge pull request #5951 from thinkyhead/rc_print_2d_array
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905 Fix MAKRPANEL assignments
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca General cleanup, const usage, var naming 2017-03-03 20:57:49 -06:00
jes
369bfc8a1e Reduce code size (40b, or 166b with bilinear subdivision) 2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105 Fix "Heating..." message 2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023 Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
divendres
75ad82baab Update Catalan language 2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4 Babysteps code tweak
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29 Reduce E_D_ratio code 2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f Add option to fix E/D ratio
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f Remove BEEPER_PIN override in pins_RIGIDBOARD.h
Resolves #5926. This override is no longer needed since the RAMPS LCD controller pins were fixed.
2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84 Merge pull request #5887 from Roxy-3D/RCBugFix
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a Merge pull request #5933 from teemuatlut/lcd_days_hours
Fix formatting of SD print time hours above one day
2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3 Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
Fix CoreYX / YZ / ZX endstop logic
2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660 Fix formatting of print time hours above one day 2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f Extend Core endstop commentary 2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761 CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.

In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.

In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.

----

Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca Make LCD_TIMEOUT_TO_STATUS configurable
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES 2017-02-27 20:42:49 -08:00
Michael Henke
330b981912 created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun 2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765 Add MAPPER_C2C3 to French language 2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb Better comments on DOUBLE_CLICK_TIME_WINDOW 2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104 Use PSTR for MSG_HEATING 2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02 fixup the indentation 2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9 Fix scoping issues for double click to Z-Babystepping 2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09 Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796 Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6 Add status_printf to print messages to the lcd status line.
Also add a hotend indicator to the heating message displayed on the lcd status line.
2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823 Merge pull request #5862 from thinkyhead/rc_fix_a_thing
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4 Finish reducing of ABL_BILINEAR_SUBDIVISION 2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632 Apply DISTINCT_E_FACTORS to sync_from_steppers
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b Merge pull request #5854 from thinkyhead/rc_fixup_m600
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6 Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08 Optimize M600 heater status LCD items 2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd Commentary / style in gcode_M600 2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f Tweak config ordering for M600 2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da Remove some old code comments 2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a Fix steps_to_mm for active extruders 2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe Pause the print job timer while in M600 2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794 Simplify filament_change_beep function 2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316 Use a short name for the filament "endstop" 2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87 Spacing, coding standards 2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679 Apply M600 updates to all configs 2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9 Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c Fix for broken MBL
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb Parenthesize some menu defines for safety 2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6 Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381 Reduce / optimize LIN_ADVANCE code 2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341 Prevent re-entering of temperature ISR
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb Cleanup position_float
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d Merge pull request #5815 from thinkyhead/rc_pulses_per_step
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605 Merge pull request #5814 from thinkyhead/hotend_loop_always
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5 Merge pull request #5811 from thinkyhead/fix_two_strings
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly 2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8 Give encoder pulse/steps conditionals their own block 2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d Make HOTEND_LOOP more consistent, let compiler optimize it 2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06 No space after X: or A: in M114 output 2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6 Fix SD_CHECK_AND_RETRY condition
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq()
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1 guaranteed BLTouch detection
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915 Fix typo in language_uk
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1 Merge pull request #5792 from thinkyhead/rc_default_dac_vals
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3 Merge pull request #5713 from gege2b/RCBF-French
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8 pinsDebug for 644/1284 & USB646/1286 families
added conditional compilation for PWMs 1C & 3C

add Teensyduino compatibility

==========================================

changes per review - minor formatting changes

1) remove non-printable character at the end of line 687

2) split a really long comment into two lines

3) got rid of some trailing spaces

============================================

Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.

The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71 French translation : Added missing strings as well as missing accents 2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default
Allow enabling volumetric filament on config load
2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974 Fix M110 without leading N
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8 Merge pull request #5683 from emartinez167/EMartinez-Changes
Updates to some incorrectly ended strings in the Spanish translation
2017-01-12 07:49:15 -08:00
Kai
25dae3bccc Update language_de.h
Small corrections
2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e Fix for some wrong strings
On last commit, some strings were ended with the incorrect character.
This fixes it.
2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76 Merge pull request #5682 from thinkyhead/rc_spanish_jan
Updates to Spanish language
2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
Reset watchdog in SD init to prevent reboot
2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8 Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
From "microseconds" to "milliseconds"
2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0 Updates to Spanish language
Add missing Spanish language definitions.
2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc Reset watchdog in SD init to prevent reboot
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608 Merge pull request #5680 from thinkyhead/rc_configs_puhlease
code_value_float tweak
2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf Merge pull request #5619 from Ocarthon/RCBugFix
Disable SD Detect for K8400
2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66 Move MOSFET changes above #include for RIGIDBOARD
Correction to #5629
2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c Fix lcd_wait_for_homing causing menu to block
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a Remove error causing break command
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj
d38e335272 From "microseconds" to "milliseconds"
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e Merge pull request #5572 from Kaibob2/patch-5
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836 Merge pull request #5567 from AnHardt/fix5194
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai
ade72535c4 Update language_de.h
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7 Fix 5194
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj
60515ff700 Update Japanese translation
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa Change "+mm" to "mm" in most languages
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8 Merge pull request #5563 from akaJes/m600
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien
4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0 Allow negative retract values in the LCD
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6 Optimize handling of block_buffer_runtime()
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542 Fix size
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9 Merge pull request #5505 from android444/patch-4
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
d486361c69 Fix for commented section of Config_RetrieveSettings() 2016-12-16 04:34:47 +09:00
esenapaj
88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf Update Japanese translation
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde Add symbol-string to _de
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444
3363d2c937 Update for translations language_pl.h 2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16 tag the utf-8 strings 2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b Merge pull request #5478 from AnHardt/stepspermm
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37 Merge pull request #5492 from thinkyhead/rc_fix_language_es
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7 fix multiple definitions of message macros in the language-es.h 2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499 Merge pull request #5490 from jbrazio/update-bqhp2
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475 Merge pull request #5475 from AnHardt/utf-mapper-tr
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3 Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048 Patch fade_factor compiler warning 2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2 Add negative temperatures for Thermistor 1
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b Expose delta_clip_start_height for use by others 2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d Update Aragonese translation 2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d Replace ftostr62sign with ftostr62rj
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt
795541f87e utf8-mapper for Turkish
The non utf8 version of turkish is a bit unhandy.

Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900 Merge pull request #5471 from thinkyhead/rc_planner_report_m503
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472 Patch to show E factors in M503 2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022 Merge pull request #5447 from thinkyhead/rc_update_dutch
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731 Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30 Merge pull request #5448 from thinkyhead/rc_eeprom_bump
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f New Dutch terms 2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7 Compile less code with EEPROM off 2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04 Add e-stepper count to EEPROM (for planner vars) 2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6 Only write to EEPROM when a byte changes 2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf volatile_block_buffer_runtime_us
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40 Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a Update french translation (LIGHTS str) 2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3 Prettify LIN_ADVANCE code with the positive condition 2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15 Add const to some variables 2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520 Pretty up ADVANCE code 2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c Pretty up coast / reverse jerk code 2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8 Slightly shrink code for jerk-based reduction of safe_speed 2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5 Simplify long_move()
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d Merge pull request #5432 from Kaibob2/patch-2
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263 Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c Merge pull request #5438 from AnHardt/patch-long_move
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt
706b240251 Patch long_move()
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj
a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Kai
390a6d976a Update language_de.h
#define MSG_ENDSTOP_ABORT  doesn't fit in Display 
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634 Suppress warnings, etc
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514 Merge pull request #5413 from MagoKimbra/rc_fix_mesh
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1 Merge pull request #5410 from thinkyhead/rc_polish_update
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28 Fix Mesh without Fade Height 2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452 Merge pull request #5406 from Rigid3D/RCBugFix
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249 Remove filament-change empty lines from languages 2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e Save space by not defining unused filament change message lines 2016-12-07 00:53:03 -06:00
android444
9b1f4b514b Update Polish language
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04 Updates to Croatian language 2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b README and Version for 1.1.0-RCBugFix
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677 Update language_tr_utf8.h 2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e Update language_tr.h 2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1 Ignore homing button when SD printing
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472 Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
Fix Croatian spacing, extra #endif
2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea Fix Croatian spacing, extra #endif 2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1 Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
Subdivide Bilinear Grid with Catmull Rom Splines
2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad Merge pull request #5394 from thinkyhead/rc_drop_board_99
Remove mystery-board 99
2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355 Remove mystery-board 99 2016-12-05 20:16:50 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa Merge pull request #5389 from thinkyhead/distribute_screen_updates
Distribute GLCD screen updates in time
2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d Fix auto_report_temperatures()
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8 Distribute GLCD screen updates in time
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine
b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine
449d9cbf60 Add placeholders for Polish translatable strings 2016-12-05 10:37:00 -06:00
c64pl
643dc4b64e Update language_pl.h
Fixed translations
2016-12-05 10:37:00 -06:00
Scott Lahteine
0974b75fb6 Merge pull request #5386 from thinkyhead/rc_galician_update
Galician language update.
2016-12-05 10:36:26 -06:00
Rafa Couto
2b9115330d Galician language update. 2016-12-05 10:11:28 -06:00
Scott Lahteine
1f3e2440bc Merge pull request #5175 from thinkyhead/rc_dualx_homing
Unpark when using Z_SAFE_HOMING with Dual X
2016-12-05 10:02:56 -06:00
Scott Lahteine
d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Guthenberg
bfb8d3b53e Show more decimals in Display, if possible
_123, -123, _-12, __-1  plus  1234, 12.3, -1.2
2016-12-05 09:05:46 -06:00
Scott Lahteine
1e30d1da47 Simplify itostr4sign
- This function becomes obsolete if ftostr4sign is re-written.
2016-12-05 09:05:46 -06:00
Scott Lahteine
82a187acae Merge pull request #5359 from AnHardt/update-de
Add missing translations to lang-de
2016-12-05 07:31:28 -06:00
Scott Lahteine
4bafdf4b66 Support DISTINCT_E_FACTORS in LCD Motion Menu 2016-12-05 07:26:18 -06:00
Scott Lahteine
3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine
0dfe95eaba Adjust formatting in Planner 2016-12-05 07:26:17 -06:00
Scott Lahteine
09587f7c0d Fix rows error in DOGM 2016-12-05 07:14:11 -06:00
Scott Lahteine
c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine
4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine
b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine
ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine
0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine
54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine
fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine
41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine
053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine
ee50928eee Make LOGICAL and RAW position macros ternary-compatible 2016-12-05 06:43:26 -06:00
Scott Lahteine
56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine
200cf3e9f9 Merge pull request #5381 from thinkyhead/rc_fix_fade_factor
Properly apply fade_factor to MBL
2016-12-05 06:06:13 -06:00
Scott Lahteine
84ff78c1e3 Pass the fade factor to mbl.get_z 2016-12-05 03:01:51 -06:00
Scott Lahteine
85c2b96685 Apply const to MBL class methods 2016-12-05 02:50:59 -06:00
Scott Lahteine
c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine
818f8b93d3 Merge pull request #5378 from thinkyhead/rc_duration_rj
Better alignment of elapsed print time
2016-12-04 22:42:23 -06:00
Scott Lahteine
9d88a61d52 Better alignment of elapsed print time 2016-12-04 21:30:49 -06:00
Scott Lahteine
0b53d78046 Tweak editable items for debugging 2016-12-04 03:51:10 -06:00
Scott Lahteine
fccc97de6d Save PROGMEM with string changes
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
2016-12-03 19:21:46 -06:00
AnHardt
e7fc353f08 Add missing translations to lang-de 2016-12-03 20:51:49 +01:00
Scott Lahteine
3f2cb376e0 Add placeholders for Bulgarian translation 2016-12-03 12:14:02 -06:00
Scott Lahteine
b22d37ba52 Merge pull request #5364 from thinkyhead/rc_croatian_update
Update Croatian to include missing strings
2016-12-03 11:37:42 -06:00
Robert Marko
b796a687ca Update Croatian to include missing strings
Added all missing strings according to English
2016-12-03 11:15:41 -06:00
Scott Lahteine
255ed80164 Fix hotend offset report in M503 2016-12-03 10:17:35 -06:00
Petr Zahradník
c66f3ed34b
Update Czech 2016-12-03 10:32:34 +01:00
Scott Lahteine
cbf208ea1f Merge pull request #5348 from Kaibob2/patch-1
Update language_de.h
2016-12-03 01:53:24 -06:00
Scott Lahteine
a2660cf688 Merge pull request #5347 from tnw513/fix-italian
Added missing translations
2016-12-03 01:52:45 -06:00
Scott Lahteine
27dd5acc22 Fix set_led_color for BLINKM
Follow-up to #5330
2016-12-03 01:51:11 -06:00
Kai
8530c32309 Update language_de.h
Grammar corrections
2016-12-02 19:40:36 +01:00
Silvio Didonna
f1d5ffa211 Added missing translations 2016-12-02 18:49:39 +01:00
Scott Lahteine
b0361ebe4f Merge pull request #5343 from thinkyhead/rc_invert_case_light
Allow case light pin to be active low
2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
3f4c02e42f Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
Allow UART ISRs inside the stepper ISR
2016-12-01 23:17:42 -06:00
Scott Lahteine
d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine
47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine
8d14420331 Fix compile without ENABLE_LEVELING_FADE_HEIGHT 2016-12-01 11:37:24 -06:00
Scott Lahteine
415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support)
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine
e00b380489 Merge pull request #5323 from akaJes/lang-ua
Adding ukrainian language support
2016-11-30 01:10:40 -06:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
esenapaj
3047f3c85c Suppress warning 2016-11-30 00:32:56 +09:00
jes
f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
jes
c90191faaf adding ukrainian laguage support 2016-11-29 14:49:45 +02:00
Sebastianv650
912704a0d8 Enable ISRs inside temperature ISR
to capture chars at UART at 250000 baud.
2016-11-28 20:08:50 +01:00
Sebastianv650
f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
e9e4208ff1 Merge pull request #5274 from Sebastianv650/improve_smooth_moves
Improvement for ENSURE_SMOOTH_MOVES
2016-11-28 02:22:08 -06:00
Scott Lahteine
c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine
a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine
59fafb93b2 Merge pull request #5304 from AnHardt/pixel-shifting
MENU_HOLLOW_FRAME for the menu screens
2016-11-28 01:41:47 -06:00
Scott Lahteine
0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822 MENU_HOLLOW_FRAME for the menu screens
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
AnHardt
24ca1a6289 Not more then 4 stripes for u8g-devices
To optimise speed.
Costs well invested 128Byte of RAM.
2016-11-26 19:08:33 +01:00
Scott Lahteine
aee71c543e Minor formatting in language.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
05d8d189f6 Adjust spacing in utf_mapper.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine
71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine
b1abd7edef Optimize graphical display with selective rendering 2016-11-26 06:53:52 -06:00
AnHardt
b91fab2d7d Fix USE_BIG_EDIT_FONT 2016-11-26 13:50:25 +01:00
Scott Lahteine
4cd73e183d Hide hidden files and folders 2016-11-26 06:26:28 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
AnHardt
75fdcc14b7 Activate font and mapper for el-gr 2016-11-26 02:30:37 +01:00
AnHardt
a0004e7cd3 Change font decent to -1 for tt and gr
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
2016-11-26 02:29:23 +01:00
Scott Lahteine
307f263f89 Merge pull request #5292 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-25 16:56:49 -06:00
esenapaj
7070143042 Update Japanese translation
・Add new translation
2016-11-24 21:10:40 +09:00
esenapaj
ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine
2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine
2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine
f60321d3e3 Merge pull request #5284 from thinkyhead/rc_turkish_update
Turkish update (squashed)
2016-11-23 14:57:52 -06:00
Mehmet Sutas
a26668b10c Add UTF8 Turkish Translation 2016-11-23 14:19:16 -06:00
Mehmet Sutas
61aa796307 Added Human Readable Comments 2016-11-23 14:19:16 -06:00
Mehmet Sutas
6fb9c6fe07 Follow-up for #5167 Turkish Language
Add check for Turkish Font before setting better font for graphic displays
2016-11-23 14:19:15 -06:00
Scott Lahteine
d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai
e9b42f4f47 Update language_de.h 2016-11-23 19:29:19 +01:00
Kai
0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine
38466b1d2f Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
2016-11-21 13:55:56 -06:00
Scott Lahteine
9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Sebastianv650
8190483eeb Improvement for ENSURE_SMOOTH_MOVES
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
2016-11-21 17:58:24 +01:00
esenapaj
da67037550 Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
・Fix memory leak
2016-11-21 22:31:01 +09:00
Scott Lahteine
0f891e848b Merge pull request #5268 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-21 03:18:36 -06:00
esenapaj
190a04c467 Update Japanese translation
・Change translation for 16 width LCD
2016-11-21 17:51:43 +09:00
esenapaj
7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Scott Lahteine
3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine
644fac5d34 Reduce all stepper_indirection init code with macros 2016-11-21 00:52:18 -06:00
Scott Lahteine
4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine
127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Sebastianv650
50059690e0 Allow UART ISRs inside the stepper ISR
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.

With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
2016-11-20 13:09:12 +01:00
Moshen Chan
29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
AnHardt
88b38eafd8 Endstop interrupt refinement
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
2016-11-19 13:30:49 +01:00
Scott Lahteine
79c8591192 Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
Ensure smooth print moves even with LCD enabled
2016-11-19 01:38:41 -06:00
Scott Lahteine
0215cacb30 Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-19 01:32:40 -06:00
Scott Lahteine
2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Scott Lahteine
072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Sebastianv650
de89dc9f04 Ensure smooth print moves even with LCD enabled
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Scott Lahteine
87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine
0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine
181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine
25d0c167bd More detailed static_assert messages 2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64 K8200: Example configuration back in sync
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
esenapaj
5db3738fe7 Re-follow the PR #4634 (Set language display charset in language.h) 2016-11-18 17:44:49 +09:00
Scott Lahteine
6eb6f12c64 Patch up some language formatting 2016-11-18 01:16:58 -06:00
Bo Herrmannsen
8cffa60cc5 Update to Danish language 10/11-2016 2016-11-18 01:16:57 -06:00
Scott Lahteine
98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e Add autotemp capabilities to M104
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00
Sebastianv650
c11b2bb777 Bugfix LIN_ADV
Advance has nothing todo with Z_AXIS, strange copy&paste error?
2016-11-17 11:28:19 -06:00
Scott Lahteine
ee0765e872 Merge pull request #5233 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-17 03:38:19 -06:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
esenapaj
b278b7a395 Update Japanese translation
Only adjust spacing
2016-11-17 09:05:51 +09:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine
d63230d73e Merge pull request #5192 from Kaibob2/patch-7
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-16 00:16:36 -06:00
Scott Lahteine
548b45026d Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
Save some cycle inside the planner
2016-11-16 00:06:55 -06:00
Scott Lahteine
5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 19:12:01 -06:00
Scott Lahteine
db47aa983d Merge pull request #5226 from mtowara/RCBugFix
bump -std in Makefile to c++11
2016-11-15 16:13:32 -06:00
Scott Lahteine
99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Markus Towara
23a675f621 reduce binary size of .hex
still a few bytes bigger than with arduino but nothing major
2016-11-15 21:57:15 +01:00
Markus Towara
5b6e2cecf5 bump c/c++ standard to gnu11
needed for constexpr
2016-11-15 21:54:12 +01:00
Scott Lahteine
410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596 Introduce endstop interrupts
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
Sebastianv650
e3ffb58fbd Save some cycle inside the planner
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?

planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
2016-11-13 13:34:12 +01:00
Scott Lahteine
665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster
Store mix factors as reciprocals and multiply
2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support
Extended host support: M155 Auto temp report, M115 capabilities
2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine
ea3c08d249 Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
Follow up the PR #5167 (Add Turkish Language) again, etc
2016-11-12 13:11:54 -06:00
Scott Lahteine
c488378532 Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
Remove useless line from stepper ISR
2016-11-12 12:43:07 -06:00
Michael Neumann
8bdf303da0 Update pins_MEGATRONICS_3.h 2016-11-12 12:26:07 +01:00
Michael Neumann
3890366c83 Update pins.h 2016-11-12 12:25:45 +01:00
Michael Neumann
c0d45ca7f2 Update boards.h 2016-11-12 12:24:47 +01:00
Sebastianv650
cdc18f8c22 Remove useless line from stepper ISR
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
2016-11-11 19:35:03 +01:00
Kai
8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine
b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b46fb2c9 Allow send to i2c address 0 (broadcast) 2016-11-08 17:54:55 -06:00
Scott Lahteine
75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj
2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine
06f2282f82 Merge pull request #5176 from thinkyhead/rc_filchange_feedback
Give instant feedback for filament change
2016-11-07 12:11:54 -06:00
Scott Lahteine
dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine
7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
esenapaj
24e3f7abe7 Update Turkish translation
・Add new translation
2016-11-07 04:59:18 +09:00
esenapaj
be48792e9c Follow up the PR #5167 (Add Turkish Language), etc
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
2016-11-06 23:59:02 +09:00
Scott Lahteine
1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Scott Lahteine
e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D
2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Nikolay Zinov
dea00bbcf1 improve G30 probing
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine
00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
Scott Lahteine
b23d255491 Move macros above Stepper::babystep 2016-11-03 23:31:45 -05:00
Scott Lahteine
cc57d46158 Fix set_position for CoreYZ 2016-11-03 23:31:45 -05:00
Scott Lahteine
0269347682 Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
OLD_SLOWDOWN does nothing, so remove it
2016-11-03 23:30:43 -05:00
Scott Lahteine
e92e2b2446 Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
Account for wipe moves
2016-11-03 23:19:25 -05:00
Scott Lahteine
176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Sebastianv650
d448500643 Account for moves with negative E movements
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
2016-11-03 17:01:17 +01:00
Scott Lahteine
236853df22 Corrections to bilinear_line_to_destination
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00