3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,378 Commits 3 Branches 78 Tags 40 MiB
41f103c28f
Commit Graph

1828 Commits

Author SHA1 Message Date
PavelSindler
7d538cde6c Retrieve settings (M501): initialize each item in feedrate and acceleration arrays separately 2018-11-19 20:05:58 +01:00
PavelSindler
e5dd4d757a progress bar fix 2018-11-16 15:45:55 +01:00
MRprusa3d
ffe906c733 MeshBed Levelling Fail V 2018-11-14 16:45:49 +01:00
PavelSindler
0398c3c26b
Merge pull request #1335 from PavelSindler/T_codes 
version change
 2018-11-13 17:49:26 +01:00
PavelSindler
51c80352e8 version change 2018-11-13 17:48:42 +01:00
PavelSindler
51b4858a87
Merge pull request #1334 from XPila/V3_5 
PFW658 - disable extruder motor while changing filament with mmu2 (pr…
 2018-11-13 16:10:24 +01:00
XPila
c41b045ea7
Merge pull request #1333 from PavelSindler/T_codes 
T-code fix
 2018-11-13 16:09:52 +01:00
Robert Pelnar
bfc343c7c5 PFW658 - disable extruder motor while changing filament with mmu2 (prevents extruder motor overheating) 2018-11-13 16:04:46 +01:00
PavelSindler
15d0b083ed whitespace 2018-11-13 15:58:21 +01:00
PavelSindler
17a1049f23 T-codes fix 2018-11-13 15:56:19 +01:00
PavelSindler
f297e72864
Merge pull request #1332 from XPila/V3_5 
Fix PFW657 - filament runout detection is not working after autoload …
 2018-11-13 14:10:11 +01:00
Robert Pelnar
d886ba1100 Fix PFW657 - filament runout detection is not working after autoload disabled from menu. 2018-11-13 14:05:15 +01:00
XPila
3d97d81734
Merge pull request #1329 from PavelSindler/M600_load_fil_message 
M600 filament load progress bar changes
 2018-11-12 20:52:06 +01:00
PavelSindler
27db32cbd0
Merge pull request #1331 from XPila/V3_5 
M907 fix - value in mA (PFW655)
 2018-11-12 20:49:09 +01:00
Robert Pelnar
41b885c537 M907 fix - value in mA (PFW) 2018-11-12 20:39:25 +01:00
MRprusa3d
5e8e96b5d7 MMU module adjustment 
MMU module conditional compilation adjustment for MMU v1
 2018-11-12 20:09:54 +01:00
PavelSindler
32da5bc039 progress bar time counted from feedrate and E - distance 2018-11-12 19:55:53 +01:00
PavelSindler
f4c1e7924f M600: show progress bar during first filament load 2018-11-12 18:35:06 +01:00
PavelSindler
10a81ea768 version change 2018-11-09 19:16:53 +01:00
PavelSindler
5931d15566 whitespace 2018-11-09 18:31:28 +01:00
PavelSindler
c991c8b314 resume print fix: wait for heater() never disable steppers 2018-11-09 18:29:35 +01:00
XPila
10b79e918b
Merge pull request #1321 from PavelSindler/M600_load_fix 
M600 load messages synchronization fixed
 2018-11-09 15:40:00 +01:00
PavelSindler
22cf2c6b6b M600 load messages synchronization fixed 2018-11-09 15:31:44 +01:00
PavelSindler
7022373885
Merge pull request #1320 from XPila/V3_5 
localization - lang-export.sh + po files + tmc2130_print_currents fixed (M913)
 2018-11-09 15:27:43 +01:00
Robert Pelnar
3afebcc9cc tmc2130_print_currents fixed (for obsolete M913) 2018-11-09 15:20:25 +01:00
PavelSindler
5f166374ab
Merge pull request #1319 from XPila/V3_5 
Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compil…
 2018-11-09 13:10:51 +01:00
Robert Pelnar
6c13225f49 Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compiled on linux arduino 1.8.5 + lto) 2018-11-09 10:45:16 +01:00
PavelSindler
0e7fb26dc5
Merge pull request #1316 from MRprusa3d/PFW-635 
MeshBed Levelling Fail IV
 2018-11-08 10:18:08 +01:00
PavelSindler
6d59f88a8e
Merge pull request #1315 from MRprusa3d/PFW-639 
Bed PowerMonitor III
 2018-11-08 10:08:31 +01:00
MRprusa3d
ccb58ae7c9 Revert "MeshBed Levelling Fail IV" 
This reverts commit bd554df02e.
 2018-11-08 04:02:32 +01:00
MRprusa3d
bd554df02e MeshBed Levelling Fail IV 2018-11-08 03:54:05 +01:00
MRprusa3d
fd45dd64dc Bed PowerMonitor III 2018-11-08 03:32:00 +01:00
PavelSindler
3cccb125f7
Merge pull request #1313 from MRprusa3d/PFW-639 
Bed PowerMonitor II
 2018-11-07 13:50:50 +01:00
MRprusa3d
4ae857136d Bed PowerMonitor II 2018-11-07 13:38:39 +01:00
PavelSindler
b80a0edac0
Merge pull request #1312 from mkbel/fix_long_press_modal 
Fix long press modal
 2018-11-07 10:28:24 +01:00
PavelSindler
a5bbc75035
Merge pull request #1309 from mkbel/fix_1st_lay_cal 
PFW-634 Move T<nr> code just before extrude code to properly load fil…
 2018-11-07 10:28:13 +01:00
Marek Bel
b4d4bfa667 Do not declare extern class in .cpp file, include appropriate header. 2018-11-06 20:54:53 +01:00
Marek Bel
95b0506284 Make lcd_long_press_active private. 2018-11-06 20:48:28 +01:00
Marek Bel
676434111e Disable long press handler in modal dialogs (LCD update disabled). 2018-11-06 20:43:19 +01:00
Marek Bel
02e31433f4 PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2. 2018-11-06 15:46:37 +01:00
Robert Pelnar
9a68501039 MK2 variants compilable 2018-11-06 14:17:43 +01:00
PavelSindler
c3bdd21fa5
Merge pull request #1308 from MRprusa3d/PFW-635 
MeshBed Leveling Fail II
 2018-11-06 10:47:03 +01:00
MRprusa3d
46b2c93d60 MeshBed Leveling Fail III 2018-11-06 01:44:53 +01:00
MRprusa3d
9953518681 MeshBed Leveling Fail II 2018-11-06 01:28:47 +01:00
PavelSindler
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q 
filament quality measurements disabled
 2018-11-05 19:14:34 +01:00
PavelSindler
0a6ca7ffd0
Merge pull request #1305 from XPila/V3_5 
PFW643 - removed M910-M918, implemented M907
 2018-11-05 19:14:19 +01:00
PavelSindler
89ad02ac8c filament quality measurements disabled 2018-11-05 18:37:36 +01:00
Marek Bel
50f9bf06be Save 74B of flash memory. 2018-11-05 18:02:46 +01:00
Marek Bel
e95c2ad592 Display auto deplete as not available if filament sensor is disabled. 2018-11-05 17:43:07 +01:00
Robert Pelnar
d6b5f5a1c7 PFW643 - removed M910-M918, implemented M907 2018-11-05 16:15:27 +01:00
Marek Bel
ef5be690fb Add autodeplete setting into tune menu. 2018-11-05 13:54:22 +01:00
PavelSindler
7e43b15b54
Merge pull request #1303 from PavelSindler/m600_idler 
M600: move extruder to the left to make space for idler opening
 2018-11-05 10:38:51 +01:00
PavelSindler
78775e2f87
Merge pull request #1302 from PavelSindler/wizard_improvements 
Wizard improvements
 2018-11-05 10:38:41 +01:00
PavelSindler
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs 
lang update
 2018-11-05 10:38:29 +01:00
PavelSindler
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements 
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
 2018-11-05 10:38:05 +01:00
PavelSindler
2619c6f7a1
Merge pull request #1283 from PavelSindler/crashdet_cancel 
canceling print after crash detection sets saved_priting flag to false
 2018-11-05 10:37:51 +01:00
PavelSindler
aeeb2af0a4 whitespace 2018-11-05 00:15:36 +01:00
PavelSindler
b058ec7120 whitespace 2018-11-05 00:14:16 +01:00
PavelSindler
934b76ade3 wait message added 2018-11-05 00:12:46 +01:00
PavelSindler
3d24f5437c leave Z move menu (hotfix) 2018-11-04 23:44:29 +01:00
PavelSindler
daef0eeb67
Merge pull request #1297 from MRprusa3d/PFW-635 
MeshBed Leveling Fail
 2018-11-04 23:33:29 +01:00
mkbel
e177c2b669
Merge pull request #1295 from PavelSindler/feedrate_change 
choosing filament from T? menu changes feedrate fixed
 2018-11-04 23:13:03 +01:00
PavelSindler
515f2723d7
Merge pull request #1301 from XPila/V3_5 
PFW644 + PFW638
 2018-11-04 23:10:10 +01:00
PavelSindler
8afb83406e Wizard for assembled printers (contains more steps now) 2018-11-04 23:08:23 +01:00
Robert Pelnar
33a29cd416 Fix PFW638 - remaining/elapsed time >100h displayed in hours 2018-11-04 20:27:09 +01:00
PavelSindler
e2d2fb58aa Z calibraion: always ask user to clean nozzle 2018-11-04 18:47:08 +01:00
XPila
35fae8be1c
Merge pull request #1294 from PavelSindler/manage_response_heating 
mmu manage response: possibility to resume saved nozzle temperature
 2018-11-04 18:31:47 +01:00
Robert Pelnar
1e05e1189d Fix PFW644 - MK25 reports stopped, arduino 1.8.5. 2018-11-03 22:44:42 +01:00
MRprusa3d
73794b56cf MeshBed Leveling Fail 
Z-leveling after MeshBed leveling failing
 2018-11-02 23:03:14 +01:00
PavelSindler
e304319e15 choosing filament from T? menu changes feedrate fixed 2018-11-02 20:25:24 +01:00
PavelSindler
d18013e5a2 manage response now contains showing nozzle temperature and possibility to resume saved nozzle temperature 2018-11-02 19:31:10 +01:00
MRprusa3d
18a8ae5b8f Bed PowerMonitor 
bed power monitoring correction
 2018-11-01 20:55:42 +01:00
PavelSindler
aaf65051f9 M600: "is color clear?" menu synchronization 2018-11-01 18:28:52 +01:00
PavelSindler
1342c312a0 use feedrate 200mm/min for final feed (faster and better filament sensor function), show default welcome message when load is finished 2018-11-01 16:51:18 +01:00
PavelSindler
96ce324b7c load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc. 2018-11-01 16:29:09 +01:00
Robert Pelnar
a0e4acead3 lang - removed unused code and some service messages changed to "not translated" 2018-11-01 14:07:16 +01:00
PavelSindler
e80af46503 load to nozzle and Tx and Tc codes: intial version 2018-10-31 21:48:05 +01:00
PavelSindler
f445b6018e canceling print after crash detection sets saved_priting flag to false 2018-10-28 11:06:10 +01:00
PavelSindler
4ecc00e4e3 M600: move extruder 100mm to the left to make space for opening idler 2018-10-26 18:19:00 +02:00
PavelSindler
6a82af487e
Merge pull request #1278 from XPila/MK3-new_bs 
New lang - fixed french langcode and comparsion in lang-clean script
 2018-10-26 13:18:48 +02:00
mkbel
16c2f6fe8e
Merge pull request #1279 from PavelSindler/turn_on_FINDA 
mmu2: filament senor (FINDA) menu fix
 2018-10-25 21:53:11 +02:00
PavelSindler
a9317b4d36 upstream/MK3 merge 2018-10-25 21:46:32 +02:00
mkbel
cdb06c65f3
Merge pull request #1275 from PavelSindler/3_4_2_branch_merging 
3_4_2 branch merging into MK3
 2018-10-25 21:45:51 +02:00
PavelSindler
0e0dbad871 #ifdef __cplusplus added to allow including to .c file 2018-10-25 21:06:37 +02:00
PavelSindler
01529f18d2 upstream/MK3 merge 2018-10-25 20:57:27 +02:00
PavelSindler
a6a81c6ea6 mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state 2018-10-25 18:26:26 +02:00
Robert Pelnar
d301aa0e8c New lang - fixed french langcode and comparsion in lang-clean script 2018-10-25 18:16:36 +02:00
Robert Pelnar
7e9eaf0f4b New lang, arduino 1.8.5 - disable multilanguage support by default 2018-10-23 17:32:52 +02:00
PavelSindler
bd8ca8d652 removed redefinition of functions in fsensor.cpp 2018-10-22 20:51:44 +02:00
PavelSindler
d1de9fff60 mmu_loop: missing return added 2018-10-22 20:38:32 +02:00
PavelSindler
d005005e22 Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging 2018-10-22 20:33:38 +02:00
PavelSindler
940f436a5f merge MK3_dev into MK3 2018-10-22 20:25:29 +02:00
PavelSindler
bc247ca02c MK2.5 sw reset at setup function 2018-10-19 17:54:48 +02:00
Robert Pelnar
ac18eb67c0 New lang, arduino 1.8.5 - boot_app debug output 
+ variable _uartout linkage fix
+ DEBUG_DCODE5
 2018-10-18 16:20:14 +02:00
Robert Pelnar
563052d015 New lang, arduino 1.8.5 - language.c - DEBUG_SEC_LANG fix 2018-10-18 15:39:08 +02:00
Robert Pelnar
868c79e835 New lang, arduino 1.8.5 - language.h - section names, messages.h - extern "C" added 2018-10-18 14:41:32 +02:00
PavelSindler
b8f92fdfa9 MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers 2018-10-18 02:44:16 +02:00
mkbel
0d9b502937
Merge pull request #1246 from PavelSindler/variants_max 
MK3: default max feedrate for x and y changed to 100mm/s
 2018-10-10 16:46:34 +02:00
PavelSindler
bbd4f70f41
Merge pull request #1221 from XPila/MK3 
Update fsensor in Manage_inactivity instead of main loop.
 2018-10-10 13:12:12 +02:00
PavelSindler
866d6758c3
Merge pull request #1243 from mkbel/simplify_EEPROM_M500 
Simplify eeprom m500
 2018-10-10 13:11:17 +02:00
Marek Bel
9dff6431e6 Format fsensor documentation. 2018-10-09 22:33:54 +02:00
PavelSindler
809ae5a5f0 default max feedrate for x and y changed to 100mm/s 2018-10-09 20:03:28 +02:00
Marek Bel
9cae0c378a Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules." 2018-10-08 20:24:56 +02:00
PavelSindler
c91c878408
Merge pull request #1202 from MRprusa3d/PFW-573 
preHeatError
 2018-10-08 16:12:33 +02:00
Marek Bel
1585dc66b0 Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 
Known limitation: Unable to compile.
 2018-10-08 15:58:49 +02:00
Marek Bel
c77672bf0f PFW-608 Decrease wear of mass erase EEPROM and do it faster. 2018-10-05 18:11:26 +02:00
PavelSindler
436f5b5728 changed version 2018-10-04 17:40:38 +02:00
PavelSindler
d2aa13d333
Merge pull request #1199 from mkbel/document_gcodes1 
Documentation: Put scattered and unscattered Gcode documentation toge…
 2018-10-04 16:29:39 +02:00
Robert Pelnar
9960c80bf7 Additional check always with enabled oq_meassure 
+ variant files
 2018-10-04 16:12:41 +02:00
Robert Pelnar
f9d8c46802 Enable/disable optical quality meassurement in settings menu 2018-10-04 15:48:28 +02:00
Robert Pelnar
ced74b7ec2 Merge remote-tracking branch 'upstream/MK3' into MK3 2018-10-04 13:53:00 +02:00
Robert Pelnar
7882b3c975 Update fsensor in Manage_inactivity instead of main loop. 2018-10-03 17:29:24 +02:00
PavelSindler
3a58489c6a
Merge pull request #1169 from mkbel/remove_duplicate_debouncing_4 
Remove duplicate debouncing 4
 2018-10-02 11:21:17 +02:00
PavelSindler
bba1ffdb65 version change 2018-09-27 21:13:06 +02:00
PavelSindler
aefb4e5c09
Merge pull request #1200 from XPila/MK3 
Filament sensor - fix invalid calculation of fsensor_counter in LA st…
 2018-09-27 21:05:33 +02:00
Robert Pelnar
e50025cc7d static_assert - portable solution compatible with C++98 2018-09-27 19:59:29 +02:00
PavelSindler
7e9220ada2
Merge pull request #1198 from PavelSindler/communication_timeouts 
communication timeouts fix
 2018-09-27 11:23:58 +02:00
MRprusa3d
0184f06dcf preHeatError 
correction of preHeatError detection
 2018-09-27 04:23:00 +02:00
Robert Pelnar
c2f535b619 Filament sensor - fix invalid calculation of fsensor_counter in LA stepper. 
+decreased additional check sensitivity/sctrictness
 2018-09-26 18:59:07 +02:00
Marek Bel
0e33db0064 Documentation: Put scattered and unscattered Gcode documentation together in process_commands documentation. Mention at least existence of all implemented commands. Document T<n> and T? commands. 2018-09-26 18:55:31 +02:00
PavelSindler
e6a00b8f53 send busy messages when checking for filament presence 2018-09-25 19:14:57 +02:00
Marek Bel
4151e19781 Remove attribute packed. It is not needed on 8-bit platform. Change of platform would be detected by static_assert (sizeof(M500_conf) == 188). 2018-09-25 16:27:20 +02:00
Marek Bel
d80fcab66c Disable filament sensor response quality check. 2018-09-25 15:50:50 +02:00
Marek Bel
19c1ba6274 Remove duplicate condition. This condition was already in if(mmu_enabled) {} else branch. 2018-09-25 14:25:03 +02:00
Marek Bel
ccfcc6f989 Document. 2018-09-24 18:32:01 +02:00
Marek Bel
3662f60f8f if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values; 2018-09-24 18:13:20 +02:00
Marek Bel
c38fef281d Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore. 2018-09-24 17:33:58 +02:00
Marek Bel
ca179a2d18 Use cs.filament_size from ConfigurationStore. 2018-09-24 17:29:02 +02:00
Marek Bel
e225e9cab0 Use cs.volumetric_enabled from ConfigurationStore. 2018-09-24 17:12:16 +02:00
Marek Bel
a201128b20 Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore. 2018-09-24 17:10:25 +02:00
Marek Bel
7e593e6922 Use cs.autoretract_enabled from ConfigurationStore. 2018-09-24 17:03:10 +02:00
Marek Bel
20ba2b1c79 Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore. 2018-09-24 16:57:48 +02:00
Marek Bel
54bcc8aa52 Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore. 2018-09-24 16:54:50 +02:00
Marek Bel
f2ae3fb1f7 Use cs.zprobe_zoffset from ConfigurationStore. 2018-09-24 16:47:57 +02:00
Marek Bel
959d0069fa Use cs.add_homing from ConfigurationStore. 2018-09-24 16:42:28 +02:00
Marek Bel
ac7c062161 Use cs.max_jerk from ConfigurationStore. 2018-09-24 16:35:33 +02:00
Marek Bel
bb66bfe6a7 Use cs.minsegmenttime from ConfigurationStore. 2018-09-24 16:22:50 +02:00
mkbel
0e7afc67ca
Merge pull request #1175 from PavelSindler/eeprom_version 
M500 EEPROM version update and M500 EEPROM block size check
 2018-09-24 16:19:55 +02:00
Marek Bel
10428b30d9 Use cs.mintravelfeedrate from ConfigurationStore. 2018-09-24 16:01:58 +02:00
PavelSindler
cd438c5c00 whitespace 2018-09-24 16:01:31 +02:00
PavelSindler
740e922b87 EEPROM M500 block size check for reading stored data added 2018-09-24 16:00:23 +02:00
Marek Bel
26e2fd1c76 Use cs.minimumfeedrate from ConfigurationStore. 2018-09-24 15:57:24 +02:00
Marek Bel
b8fefceb4d Use cs.retract_acceleration from ConfigurationStore. 2018-09-24 15:53:35 +02:00
Marek Bel
7dbe0afdc4 Use cs.acceleration from ConfigurationStore. 2018-09-24 15:47:36 +02:00
Marek Bel
cee51cf9c3 Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore. 2018-09-24 15:40:35 +02:00
Marek Bel
02becb5e6a Use cs.max_feedrate_normal from ConfigurationStore. 2018-09-24 15:09:19 +02:00
PavelSindler
053b94b711 remove "start" duplicity in setup 2018-09-24 14:57:46 +02:00
Marek Bel
3f28632443 Use cs.axis_steps_per_unit from ConfigurationStore. 2018-09-24 14:54:41 +02:00
Marek Bel
d611cad087 Temporary hide M500_conf cs to allow automated renaming. 2018-09-24 14:42:01 +02:00
Marek Bel
e94dc1341a Use M500_conf cs in Config_ StoreSettings, RetrieveSettings and ResetDefault. 2018-09-24 14:34:43 +02:00
Marek Bel
991db0e71d Finish default_conf. 2018-09-23 23:36:01 +02:00
Marek Bel
d9e2dcc736 Incomplete. 2018-09-23 22:21:28 +02:00
Marek Bel
58af1ae4c4 Add configuration store struct. 2018-09-21 20:52:44 +02:00
PavelSindler
d8dc2eef7a if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values; eeprom_version changed back to V2 2018-09-21 15:42:28 +02:00
PavelSindler
1c33b673c0 comment update 2018-09-19 18:43:27 +02:00
PavelSindler
3d57d504ba
Merge pull request #1174 from mkbel/fix_runout_resume 
Fix runout resume
 2018-09-19 18:29:32 +02:00
Marek Bel
2607a0c4ed Update documentation. 2018-09-19 17:22:06 +02:00
Marek Bel
b92b307ee8 Make variables constant. 2018-09-19 17:21:45 +02:00
Marek Bel
cce8131070 Add missing s for seconds of print time. 2018-09-19 17:20:41 +02:00
Marek Bel
b5bb40474d Fix print time overflow. 2018-09-19 17:17:32 +02:00
PavelSindler
0a5394a20e defines moved to eeprom.h 2018-09-19 15:10:10 +02:00
PavelSindler
752aec37fb M500 EEPROM version changed; if EEPROM_M500_SIZE is not updated, data are not stored 2018-09-19 14:36:26 +02:00
Marek Bel
9868dd766e Fix print not recovered when filament sensor is disabled during filament change initiated by filament run out. 2018-09-19 14:22:08 +02:00
Marek Bel
a5a7b1f1d6 Move functions definitions behind variable definitions. (No change in functionality.) 2018-09-19 14:08:31 +02:00
Marek Bel
05d3b7032d Update documentation. 2018-09-18 17:48:11 +02:00
Marek Bel
a7fdfdd258 Put repetitive code into separate function. No change in functionality. 2018-09-18 17:15:13 +02:00
Marek Bel
6ee97468ee Remove lcd_buttons_update() call from all other places than interrupt. There is no known reason, why lcd_buttons_update() should be called from multiple places and multiple contexts. Remove mutex, which is not needed anymore, and wasn't implemented properly anyway (Operation was not atomic.). 2018-09-18 16:05:49 +02:00
Marek Bel
f532da4b17 Remove duplicate button debouncing code. Save 254B flash. 2018-09-18 14:39:01 +02:00
Marek Bel
90a10a692a Enable button debouncing also in modal mode (!lcd_update_enabled). In lcd_clicked() consume click event immediately. 2018-09-18 14:38:50 +02:00
Marek Bel
ab2d350ed1 Don't enable lcd update in lcd_show_fullscreen_message_and_wait_P(). Don't show menu in wizard when ejecting filament. 2018-09-17 21:23:13 +02:00
Marek Bel
a687b8e64a Don't enable lcd update inside mmu_eject_filament(). 2018-09-17 17:12:36 +02:00
Marek Bel
f496076508 Remove redundant code. No change in functionality. 2018-09-14 18:33:03 +02:00
Marek Bel
635a1b4cd8 Add possibility to to select preheat temperature when unloading filament in first layer calibration wizard. 
Known limitations:
During filament eject, menu is shown for some moment.
 2018-09-14 18:29:14 +02:00
Marek Bel
fe30e58fb5 Add possibility to unload filament from wizard before first layer calibration, if it is not PLA. 
Known limitations:
Preheat temperature other than PLA can not be selected.
During filament eject, menu is shown for some moment.
 2018-09-14 16:06:25 +02:00
Marek Bel
d14822b22f Give wizard states human readable names. Use uint8_t as underlying type - saves 20B of FLASH memory. 2018-09-13 16:37:41 +02:00
Marek Bel
8235f0f869 Merge branch 'MK3_dev' into add_cancel 2018-09-12 19:38:26 +02:00
Marek Bel
7bc46323e2 Update pause print documentation. 2018-09-12 18:35:26 +02:00
Marek Bel
de2100ac7b Merge branch 'MK3' into MK3_dev 2018-09-12 15:22:12 +02:00
PavelSindler
0d4f4fe933
Merge pull request #1143 from PavelSindler/lang2 
lang fix
 2018-09-12 09:38:18 +02:00
PavelSindler
45066ebddc lang fix 2018-09-12 09:37:16 +02:00
PavelSindler
30d54be9de
Merge pull request #1142 from PavelSindler/lang2 
changed version
 2018-09-12 09:20:32 +02:00
PavelSindler
298950e601 changed version 2018-09-12 09:19:23 +02:00
Robert Pelnar
3e84bf6341 Lang update (translation + increased reserved space) 2018-09-12 02:45:13 +02:00
Marek Bel
13b67f0e0a Add Cancel item into PLA filament selection menu initiated by first layer calibration with MMU. 2018-09-11 22:33:13 +02:00
Marek Bel
ada7cffd32 Open menu to select filament before first layer calibration if MMU unit is present. 2018-09-11 19:53:29 +02:00
PavelSindler
96aada9061 load filament messages, czech language missing translation readded 2018-09-11 18:25:38 +02:00
Marek Bel
5649d6c3c0 Precede active filament on status screen with letter F. 2018-09-11 17:27:10 +02:00
Marek Bel
98264808dc Change gcode "T?" question from "Choose extruder:" to "Choose filament" and answers from "Extruder 1" .. "Extruder 5" to "Filament 1" .. "Filament 5". 2018-09-11 17:16:13 +02:00
Marek Bel
46df46f482 Add possibility to use other filaments in LCD_COMMAND_V2_CAL. 2018-09-11 17:03:20 +02:00
Marek Bel
19a1ccdc76 Rename choose_extruder_menu() to choose_menu_P(), add parameters to make it reusable. 2018-09-11 16:51:00 +02:00
Marek Bel
6c6354b2cb Do not preheat nozzle before loading filament to MMU in first layer calibration wizard. 
Show insert PLA filament to the first tube of MMU instead of "to the extruder".

First layer calibration wizard with MMU is now functional. But there is no option to unload filament from wizard.
 2018-09-11 16:03:46 +02:00
Marek Bel
0fcd2cf2a1 Merge branch 'MK3_dev' into fix_mmu_1st_lay_cal 2018-09-11 15:26:35 +02:00
PavelSindler
d9a2fe70ec missing declaration fix 2018-09-11 11:06:37 +02:00
PavelSindler
c023fb12d5 add choose filament messages 2018-09-11 09:50:50 +02:00
PavelSindler
90e3ae5464
Merge pull request #1127 from XPila/MK3 
Lang update, french translation
 2018-09-11 09:44:02 +02:00
Robert Pelnar
4ca300bc39 Lang update, french translation 
+resized reserved space
 2018-09-11 03:43:05 +02:00
Marek Bel
b3bc71b45b Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev 2018-09-10 23:52:51 +02:00
PavelSindler
25a46557d1 merge with upstream 2018-09-10 22:11:32 +02:00
PavelSindler
8a9f066c1b choose_extruder_menu: extruder -> filament 2018-09-10 22:09:37 +02:00
Marek Bel
cc08d660f7 Always use filament 1 for first layer calibration when MMU is present. 
Lift Z when moving from intro line to meander.
For MMU, print longer intro line to allow load to nozzle.
 2018-09-10 20:55:50 +02:00