3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,177 Commits 3 Branches 78 Tags 40 MiB
4a3644052d
Commit Graph

1663 Commits

Author SHA1 Message Date
Yuri D'Elia
16922c2643 TM: Restore extruder autofan state when stopping/resuming 
During thermal errors all fans are set to full speed.

When the print is resumed or stopped *and* the thermal error is gone,
also restore the autofan state.

Fixes #3893
 2023-01-16 08:43:23 +01:00
Yuri D'Elia
128a23544d TM: Set the cal status bit when running M310 A directly 
Running `M310 A` should set the TM calibration bit status if the
autotune procedure was successful.

Partially addresses #3891 and #3890, since running `M310 A F0` should
*still* count as valid calibration data and is not something that can be
replicated by using the LCD (which enforces self-test).
 2023-01-16 07:33:23 +01:00
3d-gussner
5b8321d602 Move Z to top during Nozzle change 2023-01-16 07:27:59 +01:00
3d-gussner
6db58f09d0 Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6 2023-01-13 11:20:49 +01:00
Yuri D'Elia
8bd0d6aeb8 wizard: Ask about the sheet before doing Z calibration 
Ask to install the sheet immediately after removing the test print.
This makes further messages less confusing.
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
a8057e0d36 wizard: Disable temperature model during hotend testing 
This avoids confusing error messages if the hotend is defective and
caught by selftest itself.

Rearrange Stopped state checks (saves 2 bytes)
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
d8ae372309 wizard: Allow partial resuming after reset 
Update the eeprom FW version as soon as migration is complete, to avoid
resetting the CALIBRATION_V2 variable at each reset.

Do not implicitly reset the calibration steps for WizState::Run: do this
only for the menu action.
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
f158a75041 Unbreak build with !PINDA_THERMISTOR 2023-01-02 10:51:47 +01:00
Yuri D'Elia
0c583ff90a Handle CALIBRATION_STATUS_TEMP_MODEL 2023-01-02 10:51:47 +01:00
Yuri D'Elia
16de033504 Handle CALIBRATION_STATUS_SELFTEST 2023-01-02 10:51:47 +01:00
Yuri D'Elia
17b10167a0 Handle CALIBRATION_STATUS_LIVE_ADJUST 2023-01-02 10:51:47 +01:00
Yuri D'Elia
d478aa5c5e wizard: Rewrite the wizard handling loop 
Simplify status tracking:

- S::Restore to continue to the next logical wizard item
- S::Finish for a successful failure
- S::Failed to exit while showing a failure
 2023-01-02 10:51:47 +01:00
3d-gussner
9fecc77c01
Merge pull request #3846 from 3d-gussner/MK3_3.12_XYZ_cal_fix 
MK3_3.12: XYZ cal change message and add LCD ouput
 2022-12-20 15:14:33 +01:00
3d-gussner
e511996cd4
Merge pull request #3845 from 3d-gussner/MK3_3.12_tm_partial_lock 
MK3_3_12: TM: Prevent lockout on invalid model values
 2022-12-20 14:37:24 +01:00
3d-gussner
eb9d58a6e0
Merge pull request #3826 from 3d-gussner/MK3_3.12_tm_default_state 
MK3_3.12 TM: Provide full defaults for model data and enable it by default
 2022-12-20 14:35:56 +01:00
3d-gussner
5a1743711c Change xyz cal message up to 24 min. instead approx. 12 min. 2022-12-20 14:34:25 +01:00
Yuri D'Elia
7bf8a64d38 Improve MSG_ACK_ERROR message 2022-12-19 10:50:50 +01:00
Yuri D'Elia
62d362f45f Also prevent longpress when Stopped 2022-12-19 10:50:34 +01:00
Yuri D'Elia
64eefa969b TM: Disallow preheat/filament actions when stopped 
Require acknowledgement first

Fix cherry-pick mmu2 issue
 2022-12-19 10:50:06 +01:00
Yuri D'Elia
5fc277469a TM: Allow to resume without a running print 
If there is no running print, and the printer is Stopped, add a new
"Acknowledge error" menu entry to unlock the printer.

This simply calls lcd_print_stop(), which is identical in behavior to a
thermal error with a running print.
 2022-12-19 10:48:40 +01:00
Yuri D'Elia
5e50a15c88 Do not show/call LCD status updates when unchanged 
This mostly prevents useless serial noise
 2022-12-19 10:48:12 +01:00
Yuri D'Elia
3b65aa06c5 TM: Clear the Stopped state when stopping the current print 
We allow resuming from the LCD via start print and resume print,
it makes sense to clear the error on stop too.

For this reason distinguish whether the action is performed
automatically or manually (ie: interactively).

The error is only cleared when the command is run interactively.
 2022-12-19 10:47:41 +01:00
Yuri D'Elia
94583c861b Rename print_stop() to lcd_print_stop_finish() for clarity 2022-12-19 10:47:26 +01:00
3d-gussner
263a4959d7 Fix µ character shown on translations 
Fix cherry-pick issues
 2022-12-16 15:58:29 +01:00
Yuri D'Elia
f81b2a00c1 Restore the previous model state when performing a nozzle change 
Do not force-enable the model if it was previously disabled.

Fix cherry-pick issue lcd_show_fullscreen_message_yes_no_and_wait_P
 2022-12-15 06:42:21 +01:00
Yuri D'Elia
f194bb1242 wizard: Allow finishing the calibration through menus 
If the wizard is interrupted during model calibration, allow the
menu to mark "temperature model" calibration as complete.
 2022-12-15 06:32:56 +01:00
Yuri D'Elia
4ce808c98b wizard: Rework the thermal model calibration logic 
- Correctly sequence the enqueued commands in order to check for the
  real calibration result.
- Perform autocalibration with self-check enabled.
- Only save/continue the wizard if autocalibration succeeds.
 2022-12-15 06:32:14 +01:00
Yuri D'Elia
6d83a494d6 selftest: Handle thermal errors in lcd_selfcheck_check_heater 
- Simplify lcd_selfcheck_check_heater loop
- Check for/abort on Stopped (indicating a thermal failure).
 2022-12-15 06:32:01 +01:00
3d-gussner
a1da5ed1ad Add Nozzle change menu to FARM mode under Settings 
Fix cherry-pick issue
 2022-12-06 11:28:21 +01:00
3d-gussner
b2b8fee015
Merge pull request #3790 from 3d-gussner/MK3_3.12_Nozzle_change 
Fix yes no for Nozzle change
 2022-11-30 17:59:34 +01:00
3d-gussner
12fc82fc36 Fix yes no 2022-11-30 16:16:57 +01:00
3d-gussner
b5b4e4d335
Merge pull request #3789 from 3d-gussner/MK3_3.12_Nozzle_change 
Mk3 3.12 nozzle change
 2022-11-30 15:51:17 +01:00
3d-gussner
7a42af1ba6 Update internal translations 
Fix G28 W
 2022-11-30 15:23:31 +01:00
Alex Voinea
ade8a87a3f fullscreen message: use \n to force the next word on the next line 
Useful for printing short URLs since those contain punctuation characters, which get treated at the end of a word under usual circumstances
 2022-11-30 15:23:07 +01:00
Alex Voinea
8261712635 Fix recursion 2022-11-30 15:22:42 +01:00
3d-gussner
d87f499443 Nozzle change menu 
Fix cherry pick
 2022-11-30 15:20:44 +01:00
3d-gussner
6d7d5d4ef3 Fix typo 
Add Norwegian translations thanks to @OS-kar
 2022-11-22 08:31:12 +01:00
3d-gussner
696117e73b Fix cherry-pick 2022-11-20 11:14:06 +01:00
3d-gussner
f8edad2fba Unhack selftest hack during wizard 2022-11-20 11:05:45 +01:00
Alex Voinea
0f70665e44 XYZ calibration fixes 2022-11-20 11:05:26 +01:00
Alex Voinea
7e9d9ade5c Fix wizard serial messages 2022-11-20 11:03:06 +01:00
3d-gussner
7fe1a50899 Inital Temp Model cal wizard 2022-11-20 11:02:38 +01:00
Alex Voinea
478a9a6cec MK2.5: unblock planner after plan_abort_hard() 2022-11-11 09:17:17 +01:00
3d-gussner
de562800ca Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 
Fix eeprom documentation
Update pot and po files as pre-release task
Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
 2022-11-07 10:37:43 +01:00
Guðni Már Gilbert
e9b7763af6 Fix long-press LCD inactivity timeout 
Fixes #3715

When a long-press is triggered, the LCD inactivity timer
needs to be restarted. This is done with lcd_timeoutToStatus.start()

This also fixes situations where a long-press is triggered, and the timer
times out immediately (because it was not reset properly)

Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
 2022-11-07 10:11:35 +01:00
3d-gussner
4785eedc06 Fix typo 
Add lcd_setatatus_serial to output lcd status message and serial at the same time
 2022-11-02 10:19:16 +01:00
3d-gussner
67877acbf6 Fix MK25/S builds 2022-10-28 05:39:42 +02:00
3d-gussner
6d358187ff Temp Model cal. menu 2022-10-28 05:39:14 +02:00
3d-gussner
1b08776873 Change fan RPM display to 5 digits 
All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656
 2022-10-19 07:01:54 +02:00
3d-gussner
162ab4538f rename Extruder fan to Hotend fan 
Fix cherry-pick issues
 2022-10-19 07:01:07 +02:00