3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
6118 commits 3 branches 78 tags 40 MiB
Commit graph

255 commits

Author SHA1 Message Date
D.R.racer
fe72ba7a9d Add PC-blend preheat preset 2020-06-03 17:45:55 +02:00
Alex Voinea
751f810dd7
ALTFAN implementation (#2692) 
* ALTFAN implementation

* Use CRITICAL_SECTION macros

* Use uint16_t instead of unsigned int

* Add forgotten CRITICAL_SECTION

* Documentation
 2020-06-01 17:58:15 +02:00
DRracer
a10b7f3963
Merge pull request #2470 from leptun/MK3_Adjusted_mintemp 
Adjusted hotend, bed and Ambient mintemp values
 2020-02-07 08:54:50 +01:00
Yuri D'Elia
eb2ca78167 Rewrite uvlo handling for accurate Z re/positioning 
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
  the Z position to a true fullstep before disabling the motor. This
  avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
  once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
  and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
  introduce a new "PRUSA MBL" gcode as most of the procedure is
  enqueued, and no existing gcode was available.
 2020-01-26 17:46:50 +01:00
Alex Voinea
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values 2020-01-21 14:50:53 +02:00
DRracer
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter 
Enable MMU cutter.
 2020-01-09 13:47:44 +01:00
Yuri D'Elia
19589f02f1 Remove an unused define 2019-12-04 17:22:21 +01:00
Alex Voinea
779423f0e7
Move hardcoded values to variants 2019-11-29 15:06:54 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00
Marek Bel
0fda4e5594 Merge branch 'cut_last_try' into enable_cutter 2019-09-10 18:37:09 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3 
Add a threshold distance to Z calibration
 2019-09-10 16:20:24 +02:00
MRprusa3d
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h 2019-09-09 02:20:39 +02:00
MRprusa3d
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h 2019-09-09 02:20:14 +02:00
MRprusa3d
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h 2019-09-09 02:19:52 +02:00
MRprusa3d
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h 2019-09-09 02:19:27 +02:00
MRprusa3d
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h 2019-09-09 02:18:54 +02:00
MRprusa3d
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h 2019-09-09 02:18:22 +02:00
MRprusa3d
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h 2019-09-09 02:17:42 +02:00
MRprusa3d
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h 2019-09-09 02:17:00 +02:00
Marek Bel
3da43ae8c2 Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile. 2019-08-26 21:14:07 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
469ca6e184 Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter 2019-08-15 14:48:28 +02:00
Simon Benoit
49d2866b48 Add threshold distance to Z calibration 
Add missing if statement
 2019-07-30 19:43:07 -04:00
Marek Bel
f9e32c4bf4 Re-enable linearity correction for MK3. 2019-07-23 19:22:54 +02:00
DRracer
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811 
"disable_z()" for Delta PSU
 2019-07-16 16:46:34 +02:00
Marek Bel
4e7de776cd Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore. 2019-07-10 17:07:00 +02:00
MRprusa3d
8229a45187 pre-production version ;-) 2019-07-09 12:16:51 +02:00
MRprusa3d
4db4f19128 'variant files' update ;-((( 2019-07-03 18:14:48 +02:00
MRprusa3d
7e3cb98a1f & MK3S 2019-07-03 17:50:41 +02:00
MRprusa3d
a3a7f3106e print parameters checking 2019-07-03 17:21:11 +02:00
Marek Bel
181c42fa62 Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter 2019-06-18 20:03:41 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790 2019-06-12 17:32:13 +02:00
Marek Bel
00da4640e2 Document. 2019-05-30 23:29:33 +02:00
Marek Běl
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500 
Allow save of uStep resolution with M500
 2019-05-13 17:08:34 +02:00
Marek Bel
a9d6ae296b Enable watchdog for all variants. 2019-05-10 16:30:08 +02:00
Robert Pelnar
18dec75b56 MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
Marek Bel
469aa10097 Enable MMU cutter. 2019-03-29 07:27:29 +01:00
MRprusa3d
632781c4a2 "disable_z()" for Delta PSU 2019-03-21 00:45:15 +01:00
Harpalyke
0f21ccee3c Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
MRprusa3d
7d98177716 farmMode updates 2019-03-19 19:48:40 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7 
7x7 mbl and switching mmu modes
 2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3 Revert "variants update" 
This reverts commit c3a95ab79b.
 2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3 Disable mmu filament cutter feature. 2019-03-15 03:38:37 +01:00
PavelSindler
9e0e4198c5 Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
PavelSindler
c3a95ab79b variants update 2019-03-12 11:57:35 +01:00
PavelSindler
f0cc313fed debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
PavelSindler
7f92d73a40 MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update 2019-03-04 17:04:22 +01:00
PavelSindler
26cab2911f mmu stealth mode 2019-02-22 16:30:54 +01:00
PavelSindler
a220c97f94 Revert "variant files" 
This reverts commit 850d3316b6.
 2019-02-06 16:19:30 +01:00
PavelSindler
850d3316b6 variant files 2019-02-06 15:18:12 +01:00
PavelSindler
5324181bf7 maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself 2019-02-03 20:56:14 +01:00
PavelSindler
60acdd23c5 variants 2019-01-28 21:12:38 +01:00
PavelSindler
8f039263d5 variant files and version 2019-01-28 17:14:24 +01:00
PavelSindler
7e3a1c7d45 merge changes from upstream 2019-01-25 17:57:24 +01:00
MRprusa3d
46e2bdaf62 Merge remote-tracking branch 'public_remote/MK3' into PFW-556 2019-01-24 19:39:34 +01:00
PavelSindler
e0c1e4a02d version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus 2019-01-24 01:12:30 +01:00
MRprusa3d
867182c266 minTemp 
more user-proof solution
 2019-01-23 18:50:13 +01:00
PavelSindler
54f8f4eb4d
Merge pull request #1460 from MRprusa3d/PFW-723 
Pfw 723
 2019-01-23 14:12:19 +01:00
MRprusa3d
d7ac459da7 PID / manage_heater 
build-warnings elimination
 2019-01-20 01:23:15 +01:00
Marek Bel
052ae323f8 Merge branch 'MK3' into prusa3d-DEV_MK3 2019-01-15 16:58:36 +01:00
PavelSindler
3ab1daf722 MMU_DEBUG temporarily enabled 2018-12-21 23:17:32 +01:00
PavelSindler
688d4a8a82 missing defines in variant files 2018-12-21 21:05:54 +01:00
PavelSindler
3c64bad1cb initial version which works on old and new hw, initial version of idler sensor detection 2018-12-21 17:12:16 +01:00
PavelSindler
29ecd4ec7a duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu 2018-12-12 22:32:47 +01:00
PavelSindler
e52e53d1eb send continue loading commands periodically if initial load fails 2018-12-12 13:54:17 +01:00
Robert Pelnar
35378769fd MMU - idler sensor 2018-12-06 19:19:50 +01:00
Robert Pelnar
6157c3ab32 New filament sensor 2018-12-06 15:41:53 +01:00
MRprusa3d
83a9f75abe minTemp 
correct minTemp detection @ MK2.5 & MK3
 2018-11-28 23:43:16 +01:00
PavelSindler
32da5bc039 progress bar time counted from feedrate and E - distance 2018-11-12 19:55:53 +01:00
Robert Pelnar
9a68501039 MK2 variants compilable 2018-11-06 14:17:43 +01:00
PavelSindler
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q 
filament quality measurements disabled
 2018-11-05 19:14:34 +01:00
PavelSindler
89ad02ac8c filament quality measurements disabled 2018-11-05 18:37:36 +01:00
Robert Pelnar
d6b5f5a1c7 PFW643 - removed M910-M918, implemented M907 2018-11-05 16:15:27 +01:00
PavelSindler
96ce324b7c load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc. 2018-11-01 16:29:09 +01:00
PavelSindler
d005005e22 Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging 2018-10-22 20:33:38 +02:00
PavelSindler
bc247ca02c MK2.5 sw reset at setup function 2018-10-19 17:54:48 +02:00
PavelSindler
b8f92fdfa9 MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers 2018-10-18 02:44:16 +02:00
mkbel
0d9b502937
Merge pull request #1246 from PavelSindler/variants_max 
MK3: default max feedrate for x and y changed to 100mm/s
 2018-10-10 16:46:34 +02:00
PavelSindler
bbd4f70f41
Merge pull request #1221 from XPila/MK3 
Update fsensor in Manage_inactivity instead of main loop.
 2018-10-10 13:12:12 +02:00
PavelSindler
809ae5a5f0 default max feedrate for x and y changed to 100mm/s 2018-10-09 20:03:28 +02:00
Robert Pelnar
9960c80bf7 Additional check always with enabled oq_meassure 
+ variant files
 2018-10-04 16:12:41 +02:00
MRprusa3d
0184f06dcf preHeatError 
correction of preHeatError detection
 2018-09-27 04:23:00 +02:00
PavelSindler
1bb9e9ed92 MMU_DEBUG 2018-09-10 20:39:28 +02:00
PavelSindler
d96b0d5f32 linearity correction define added (menu readded) 2018-08-30 11:28:12 +02:00
PavelSindler
5769b758ee max feedrate for stealth mode reduced to 100mm/s (because of loudness) 2018-08-26 16:50:28 +02:00
Robert Pelnar
71f1a1f6db MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
Robert Pelnar
d378575a68 SNMM_V2 - default retraction declared as variable 2018-08-02 17:07:09 +02:00
PavelSindler
40da6deef8 timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file 2018-07-31 19:00:42 +02:00
PavelSindler
4fb27866f4
Merge pull request #972 from PavelSindler/end_file_section 
End file section for searching M84 in gcode file enlarged
 2018-07-26 19:59:37 +02:00
PavelSindler
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang 
EEPROM dump (code D3)
 2018-07-26 19:59:09 +02:00
PavelSindler
5bda19b9f7 config for mmu updated 2018-07-26 14:59:49 +02:00
Robert Pelnar
691e7a24ed EEPROM dump (code D3) 2018-07-26 13:20:35 +02:00
PavelSindler
da82062d41 End file section for searching M84 in gcode file were enlarged (compatibility with mmu Slic3r) 2018-07-25 18:26:22 +02:00
PavelSindler
e47656df97 config for MK2.5 change 2018-07-23 21:12:50 +02:00
PavelSindler
e4641d3db4 config for MK25 Rambo1.0 changed 2018-07-23 21:09:07 +02:00
PavelSindler
f72f385c82 SUPPORT_VERBOSITY temporary solution 2018-07-23 20:11:16 +02:00
PavelSindler
c65efd0114 config file updated 2018-07-23 20:05:42 +02:00
PavelSindler
b688bc9294
Merge branch 'MK3' into reapply_fix_compiler_warnings 2018-07-23 14:38:43 +02:00
Marek Bel
88cce94cf9 Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 
This reverts commit 77426b563a.
 2018-07-23 13:35:38 +02:00
Robert Pelnar
60b4db15e0 FSensor - M600 fix + cond. translation + tunning filter and params 2018-07-22 16:14:13 +02:00