3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,984 Commits 3 Branches 78 Tags 40 MiB
d78506a8ea
Commit Graph

4536 Commits

Author SHA1 Message Date
3d-gussner
3ae4b6d329 Merge remote-tracking branch 'pkg2000/MK3_3.11.0' into HEAD 
Fix merge issues and POEdit double `\\` to `\`
Update `lang_en_no.txt`
Enable Norwegian translation in `config.h`

Tested on MK404 MK3S
 2022-05-24 07:28:10 +02:00
Guðni Már Gilbert
65d500f2ed Simplify printer_smodel_check 
Saves 140 bytes of flash and 4 bytes of SRAM
 2022-05-22 17:57:47 +00:00
Yuri D'Elia
d53eb69150 Manually cast to int when comparing against extrude_min_temp 
Avoid the automatic conversion to float to improve code size.
 2022-05-12 12:20:54 +02:00
Yuri D'Elia
ea46402e4d Replace EXTRUDE_MINTEMP with the configurable extrude_min_temp 
Everywhere MINTEMP is checked, use the configurable value set by M302,
not an hardcoded value.

EXTRUDE_MINTEMP is now used only as the initial default value.

Reduce the precision of extrude_min_temp to an integer to reduce the
generated code size (constant folding did in fact do the same previously
anyway). Having tenths of degrees is not necessary for this feature.
 2022-05-11 20:07:38 +02:00
Yuri D'Elia
64f646a8a4 Add notices about Sheet::bed_temp and Sheet::pinda_temp being unused 
There is a potential for 2*8 bytes of extra sparse eeprom space, plus a
few bytes saved if we remove the update calls, so add a notice that
these values are currently only written-to, but never actually used.
 2022-05-11 11:15:36 +02:00
Alex Voinea
7515db1ef0 Adjust comments 2022-05-02 10:02:00 +02:00
Alex Voinea
0b23ccdee9 Abort arc on planner hard stop 2022-04-29 20:38:48 +02:00
Yuri D'Elia
5b3441b2bd Fix AMBIENT_RAW_*_TEMP define names 
The max/min temperature check were incorrectly using
HEATER_AMBIENT_RAW_*_TEMP (non-existing) instead of the correct
AMBIENT_RAW_*_TEMP (this is not a heater afterall).

This doesn't change the current behavior, since the check defaulted to
the correct path for the MK3+ configuration anyway.
 2022-04-29 16:54:39 +02:00
FormerLurker
bb33c76d2b Fix and simplify M214 data types and default config initialization. 2022-04-28 14:36:51 +02:00
FormerLurker
02b0307307 Code Cleanup 2022-04-28 14:36:51 +02:00
FormerLurker
623c029bfa Code cleanup to reduce program storage 2022-04-28 14:36:51 +02:00
FormerLurker
acc234b0c5 Fix config store load (was missing n_arc_correction). 2022-04-28 14:36:51 +02:00
FormerLurker
3880777691 Fix invalid bool compare. 2022-04-28 14:36:51 +02:00
FormerLurker
6fc8155cbe Add n_arc_correction and enhanced small angle sin/cos approximation. 2022-04-28 14:36:51 +02:00
FormerLurker
58d9916d54 Make suggested corrections. 2022-04-28 14:36:51 +02:00
FormerLurker
4aa5a75301 Enhance arc interpolation and add M214 for controlling arc interpolation settings. 2022-04-28 14:36:51 +02:00
Alex Voinea
e3f48ead9f
Merge pull request #3440 from gudnimg/optimise-checkFanSpeed 
Optimise `checkFanSpeed()` Flash use
 2022-04-21 14:04:23 +02:00
Alex Voinea
d860d61513
Merge pull request #3459 from gudnimg/remove_pid_add_extrusion_rate 
Remove unused setting `PID_ADD_EXTRUSION_RATE`
 2022-04-21 14:01:50 +02:00
Alex Voinea
d4d8149c9b
Merge pull request #3438 from leptun/MK3_reset_acceleration_rates_on_steps_per_mm_change 
Reset acceleration rates when changing microstepping resolution
 2022-04-21 13:59:55 +02:00
Alex Voinea
a4887b542f
Merge pull request #3467 from gudnimg/autostart_stilltocheck-optimisation 
Optimise `autostart_stilltocheck` variable
 2022-04-21 13:57:02 +02:00
Guðni Már Gilbert
bf38241afe Make M117 message persistent when using G4 command 
This is also supported in Marlin 2 FW

Fixes #1443
Fixes #2970
 2022-04-18 17:07:34 +00:00
Guðni Már Gilbert
727060ddd8 Replace CustomMsg::MsgUpdate with CustomMsg::M117 
MsgUpdate was only used with M117, renaming the message type to M117 may be more descriptive for current use case.
 2022-04-17 15:01:48 +00:00
Guðni Már Gilbert
c77b768fdd Make M117 custom message persistant if print is paused 
If M117 is called before M601 then we would like the custom message to
be visible on the LCD screen until the print is resumed.

Change in memory: +10 bytes of flash

Fixes #3316
 2022-04-17 14:00:41 +00:00
Alex Voinea
b5f6bbb2c3 XFlash upload message 2022-04-15 12:37:51 +02:00
3d-gussner
312f3070c2 Use/show help.prusa3d.com instead of howto.prusa3d.com 2022-04-13 13:33:26 +02:00
Yuri D'Elia
765fbd3e92 Fix argument of lcd_selftest_fan_auto to be uint8_t 2022-04-11 17:42:31 +02:00
Guðni Már Gilbert
15b41e7348 Optimise autostart_stilltocheck variable 
Make the variable static within the checkautostart function.
When the function is called for the first time autostart_stilltocheck
is set to true and will continue to live after the function is exited.
After it is set to false within checkautostart() it will continue to be
false forever.

Using static this way is more efficient than using a global variable

Saves 6 bytes of flash and 1 byte of SRAM
 2022-04-09 11:10:55 +00:00
Alex Voinea
b52597f1b2
Merge branch 'MK3_3.11.1' into MK3_3.10.2 2022-04-07 14:05:34 +02:00
D.R.racer
6b6e06695f Version changed (3.11.0 build 4955) 2022-04-07 09:38:13 +02:00
Yuri D'Elia
859aa4d283 Reuse M123 during fan selftest to report RPM 
M123 reports both fan speeds nicely in RPM, as well as the requested PWM
for each so that we don't need to show the test "number" to distinguish
between the two in the serial output.
 2022-04-04 23:29:52 +02:00
Yuri D'Elia
7671ff37a9 Fix/optimize fan selftest 
Rewrite the part of the fan selftest to use a shared path between hotend
and print fan.

Remove the useless 10 seconds spin-up delay for the print fan. Reduce it
to 5 seconds.

Properly wait for readings after spin-up, so that RPMs are more
reliable. Also tune the print fan threshold to a more reasonable
default. Both, in conjunction, now avoid the "swapped fan" check that
was incorrectly triggered in almost every case.
 2022-04-04 21:36:02 +02:00
Guðni Már Gilbert
c62c412cc3 Remove unused setting PID_ADD_EXTRUSION_RATE 
Even if the setting was turned on, it doesn't do anything useful.
 2022-03-30 19:03:41 +01:00
Yuri D'Elia
1949802bea Cleanup: remove unused FILAMENT_RUNOUT_SUPPORT define 
FILAMENT_RUNOUT_SUPPORT has never been supported in the MK3 branch, and
contains a ton of horrible and unmaintained code that doesn't even
compile anymore.

Since this code is currently polluting a sizable block inside the G0/G1
code block, simply get rid of it.
 2022-03-30 12:49:08 +02:00
Yuri D'Elia
d724eb1f92 Cleanup hardcoded values to constants in M701 2022-03-30 12:33:46 +02:00
Yuri D'Elia
6317a6147d Use a consistent distance/feedrate for the [auto]load sequence 2022-03-30 11:38:25 +02:00
3d-gussner
4752b2b479 Disable Norwegian 2022-03-23 10:18:16 +01:00
3d-gussner
85a5986e9e Update ////MSG... for lang-add.sh 2022-03-16 09:01:14 +01:00
Guðni Már Gilbert
7f751ae6ac Add M201 paramters to documentation 
Also fixed the reprap link for M201
 2022-03-13 15:53:51 +00:00
Guðni Már Gilbert
8e2d44987f Document M203 parameters 2022-03-13 15:49:38 +00:00
Guðni Már Gilbert
935458beca Add 'E' parameter to M701 documentation 
Remove missing 'U' parameter in M702
 2022-03-13 12:04:26 +00:00
3d-gussner
7c55cf801b Fix additional merge issues 
Update lang-??port.sh scripts
 2022-03-12 10:51:26 +01:00
3d-gussner
764a1fd411 Merge remote-tracking branch 'upstream/MK3_3.11.0' into MK3_3.11.0_Improve_languages2 
Fix Swedish merge issues
 2022-03-12 09:44:00 +01:00
3d-gussner
626e5b43eb Fix part 2 of \04Refresh and Sheet... 2022-03-11 15:37:57 +01:00
3d-gussner
b4492067a4
Merge branch 'MK3_3.11.0' into MK3_3.11.0_Swedish 2022-03-10 14:59:46 +01:00
3d-gussner
d6de893ac5 Fix SN compile warnings for MK2.5/S 2022-03-07 18:45:45 +01:00
3d-gussner
45cd904520 Remove duplicate Extruder fan: 
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
 2022-03-07 11:47:53 +01:00
3d-gussner
bcd2b6f8bf Remove Choose filament as it is a duplicate of Select filament 2022-03-07 11:47:53 +01:00
3d-gussner
879803daa9 Temp. cal. -> PINDA cal. 
01234567890123456789
 Temp. cal.   [Off] old
 PINDA cal.   [Off] new

Temp. cal.  1/6     old
PINDA cal.    1/6   new

MSG_TEMP_CALIBRATION -> MSG_PINDA_CALIBRATION
MSG_TEMP_CALIBRATION_DONE -> MSG_PINDA_CALIBRATION_DONE

Updated text
- MSG_PINDA_CALIBRATION_DONE
- MSG_PINDA_CAL_FAILED

Update status line during PINDA cal.

Changed PINDA cal. from submenu to function
- Deleted `lcd_pinda_calibration_menu()`
- Deleted `#MSG_CALIBRATE_PINDA c=17`

Tried to update translations

Updated po files
 2022-03-07 11:47:52 +01:00
3d-gussner
7939142922 Change Choose extruder to Select extruder for consistant wording 2022-03-07 11:47:52 +01:00
3d-gussner
81d8c72cc4 Remove duplicate Extruder fan: 
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
 2022-03-07 11:47:52 +01:00
3d-gussner
4a73cad3fd Remove Choose filament as it is a duplicate of Select filament 2022-03-07 11:47:52 +01:00
3d-gussner
6822b65e9c FW Crash messages will not be translated 2022-03-07 11:47:52 +01:00
Guðni Már Gilbert
d42ef4784c Optimise checkFanSpeed() 
Changes save 28 bytes of flash
 2022-03-06 12:54:24 +00:00
3d-gussner
851f72b059
Merge pull request #3389 from leptun/MK3_SN_GET_only_on_Einsy 
Allow SN get only on the Einsy
 2022-03-04 08:16:01 +01:00
3d-gussner
0889b3f49e
Merge pull request #3390 from leptun/MK3_fake_SN 
Fix Octoprint connect because of SN GET on blank einsy boards
 2022-03-04 08:15:48 +01:00
3d-gussner
e10e196982
Merge pull request #3350 from leptun/MK3_fix_SN_crash2 
Add a uart RX timeout
 2022-03-04 08:15:17 +01:00
Alex Voinea
159c4cf8ae Reset acceleration rates when changing microstepping resolution 2022-03-03 22:25:48 +01:00
Alex Voinea
0896442335 Use correct filament type in variant files 2022-03-02 12:02:17 +01:00
Guðni Már Gilbert
4a02ff3de8 Change SERIAL_PROTOCOL to SERIAL_PROTOCOLPGM in a few lines 
Saves 12 bytes of SRAM but increases flash use by 12 bytes.
 2022-02-28 11:37:13 +01:00
Alex Voinea
97c371e5e8 Make the "ln" functions no-inline. 
Save 348B of flash
 2022-02-27 20:58:56 +01:00
Guðni Már Gilbert
af36f654d1 Optimise a few uses of SERIAL_PROTOCOLLN 
Saves 34 bytes of flash memory and reduces code by 8 lines.
 2022-02-27 20:58:50 +01:00
Alex Voinea
bb56c35b87 Optimise PINDA cal status Serial print 
"PINDA cal status:" is always printed no matter what cal_status is so we can pull that out of the conditional statment.

cal_status is also a boolean, lets just print it directly. Its a simpler code.

Saves 32 bytes of flash and 22 bytes of SRAM

Change serial messages to PGM
 2022-02-27 20:58:46 +01:00
Guðni Már Gilbert
efde923e57 Purge ftostr3 
Saves 54 bytes of Flash and 2 bytes of SRAM
 2022-02-27 20:58:39 +01:00
Alex Voinea
8e85242c8f Temperature selection is int16_t. Use sprintf for PID start command. 
Saves 90B of flash and 2B of ram
 2022-02-27 20:57:24 +01:00
Guðni Már Gilbert
6d98e99356 Use sprintf_P for M301 instead of ftostr32 
Also fixed indentation of if statement

Saves 248 bytes of flash
 2022-02-27 20:57:24 +01:00
Guðni Már Gilbert
0e6ff38b61 Optimise strcpy calls to use strcpy_P 
Saves 24 bytes of SRAM
 2022-02-27 20:57:24 +01:00
Guðni Már Gilbert
3ab57086b1 Remove one call to dtostrf 
I could not see any difference in the functionality when testing this locally

Changes save 818 bytes of flash memory
(I suspect this is due to dtostrf no longer being called in the firmware for MK3S?)
 2022-02-27 20:57:24 +01:00
Alex Voinea
6e15df6a4e
Merge pull request #3430 from leptun/MK3_MK2_obsolete 
Make the MK2 variants obsolete in the MK3 branch
 2022-02-25 13:04:39 +02:00
Alex Voinea
0c716d21fe
Merge pull request #3377 from leptun/MK3_fix_lang_reserved_area 
Fix lang reserved area alignment
 2022-02-25 12:36:33 +02:00
Alex Voinea
a617025d85 Move MK2 variants to obsolete 2022-02-25 11:14:55 +01:00
Alex Voinea
ce7cccab80
Merge pull request #3417 from leptun/MK3_temperature_busy_messages 
Print busy messages while waiting for heaters
 2022-02-25 12:03:23 +02:00
Alex Voinea
50f4981a06 Remove forgotten SNMM code in M600 2022-02-24 14:02:49 +01:00
3d-gussner
715f466fda Add Norwegian 2022-02-22 11:56:01 +01:00
3d-gussner
436b6f206a Activate Swedish community translation 2022-02-22 06:59:23 +01:00
Guðni Már Gilbert
227b6b4b03 Fix FINDA timer 
We want to set the FINDA state IF the timer has not expired.
It is helpful to see why by looking at the commit which broke
this 802b8860c8

Without this fix my FINDA sensor just shows N/A. But after this commit is works perfectly.
 2022-02-20 12:28:40 +00:00
Alex Voinea
0cc364ff7a Print busy messages while waiting for heaters 2022-02-17 17:53:02 +01:00
Alex Voinea
b654217a5b
Merge pull request #3416 from leptun/MK3_MMU2_capability_line 
Add MMU2 capability line
 2022-02-17 17:44:39 +01:00
Alex Voinea
e98bb086cc
Merge pull request #3414 from leptun/MK3_xflash_partitioning 
xflash partitioning
 2022-02-17 17:10:10 +01:00
Alex Voinea
5499ce5931 Add MMU2 capability line 2022-02-17 17:05:17 +01:00
Alex Voinea
28a3458634 Fix crash detected message translation 2022-02-17 13:05:01 +01:00
D.R.racer
c5999888e6 Version changed (3.11.0-RC1 build 4864) 2022-02-17 10:16:52 +01:00
DRracer
159c9c34bd
Merge pull request #3089 from wavexx/show_axes_during_crash 
Show affected axes in crash detection messages
 2022-02-17 09:52:19 +01:00
Alex Voinea
52b464688f Make layout static regardless of what is enabled 2022-02-17 09:34:09 +01:00
Alex Voinea
eae6b4e911
Merge pull request #3412 from leptun/MK3_TWI_timeout 
Hardware TWI timeout
 2022-02-17 09:26:47 +01:00
Alex Voinea
1e0f414d41 Make twi timer local to the wait function 2022-02-17 09:22:18 +01:00
Alex Voinea
536395eabf
Merge pull request #3413 from leptun/MK3_fix_timer_polling 
Make some timers LongTimer
 2022-02-17 09:00:13 +01:00
Alex Voinea
91c71da810 Convert some more suspicious timers to LongTimer 2022-02-17 08:48:29 +01:00
Alex Voinea
0172cbdf8b Extra TWI disable code. Not used yet. 2022-02-17 00:05:31 +01:00
Alex Voinea
6351d29d70 TWI timeout 2022-02-17 00:05:09 +01:00
Yuri D'Elia
5b6a057037 Reduce duplication and code size 2022-02-16 16:45:06 +01:00
Yuri D'Elia
35a67ad51f Fix typo 2022-02-16 16:23:31 +01:00
Yuri D'Elia
3a00054c55 Show the axes invoved during crash detection 
Explicitly show which axes are affected on the status line when a crash
has been detected.

When the crash recovery prompt is triggered, also show all axes which
have been affected during the detection interval (currently X, Y, or
both).

The timer detection has been simplified to match the MK3 optical
filament timeout handling, which makes more sense: a crash immediately
following a crash recovery prompt will trigger the prompt again. The
timer needs to properly expire in order to reset the crash count.

This helps crash detection tuning (and help users reporting issues with
crash detection) without having to monitor the serial line.

This currently abuses the MSG_CRASH_DETECTED message by prepending the
[X][Y] labels to the message, which is ok in english but might not
translate that well for all languages.
 2022-02-16 15:47:28 +01:00
Yuri D'Elia
9b6fca9214 Introduce lcd_show_yes_no_and_wait for future use 
Split off yes/no lcd handling from
lcd_show_fullscreen_message_yes_no_and_wait_P into a separate function
in order to allow generic requests where the text prompt can change.
 2022-02-16 14:17:56 +01:00
Alex Voinea
26f31743f7 Fix crashDet timer overflow handling 2022-02-16 10:06:07 +01:00
Alex Voinea
91797214b0 Update Eject and Cut to use for loop for menu items 
Saves 134B of flash
 2022-02-15 23:37:55 +01:00
Alex Voinea
2ec530c282 Do not hardcode the factory reset menu item count 2022-02-15 15:58:33 +01:00
Alex Voinea
a6331d22c8 Remove ancient SNMM code in the MK3 branch 2022-02-15 15:58:33 +01:00
Alex Voinea
775c460dc5
Merge branch 'MK3' into MK3_fix_usb_timer 2022-02-15 10:36:57 +01:00
DRracer
9aa0b250ff
Merge pull request #3405 from wavexx/fixup_suspicious_indentation 
Fixup suspicious indentation in lcd_show_sensors_state
 2022-02-15 10:31:20 +01:00
DRracer
8a1e9ea38e
Merge pull request #3397 from leptun/MK3_reset_time_remaining_on_stop 
Fix time remaining not reset on stop print
 2022-02-15 10:30:09 +01:00
DRracer
2d9a154541
Merge pull request #3247 from gudnimg/remove-ifdef-gudni 
Remove unused ifdef `MK1BP` and `MAX_SILENT_FEEDRATE`
 2022-02-15 10:27:21 +01:00
DRracer
e641d6e1e1
Merge pull request #1263 from metacollin/calfix 
Make the simple 4 axis stepper control respect the axis inversion settings in Configuration_prusa.h
 2022-02-15 09:26:42 +01:00
Alex Voinea
a1711f727e Disable pullup crash test 2022-02-15 09:07:18 +01:00
Alex Voinea
73406f53e9
Merge pull request #3393 from gudnimg/add-menu-back-arrow-to-preheat-menu 
Add menu back arrow to the Preheat menu
 2022-02-15 08:49:07 +01:00
Yuri D'Elia
40881f52ad Prettify lcd_show_sensors_state() v2 
Allow to show the full precision of Xd/Yd by rearranging the layout
 2022-02-14 23:30:08 +01:00
Yuri D'Elia
0c63e0e8df Prettify MK3 sensor-info screen 2022-02-14 18:07:54 +01:00
Yuri D'Elia
d89f4e9952 Fix indentation in the MK3 sensor information screen 2022-02-14 17:59:47 +01:00
Alex Voinea
8d0f4b766a Change fake SN as requested 2022-02-14 10:14:08 +01:00
Alex Voinea
4ec8781df2 Fix usb print timer 2022-02-13 22:52:49 +01:00
Alex Voinea
5ae45d583f Fix time remaining not reset on stop print 2022-02-13 08:52:27 +01:00
Alex Voinea
480c30221e
Merge branch 'MK3_3.11.0' into MK3_3.11.0 2022-02-12 23:01:02 +01:00
Guðni Már Gilbert
bd3a835516 Optimise preheat menu's MENU_ITEM_BACK_P 
Saves 10 bytes of flash memory
 2022-02-12 14:17:11 +00:00
Guðni Már Gilbert
70ee06144e Add menu back arrow to the Perheat menu 
All other menus have this arrow on the back button.
 2022-02-12 12:48:39 +00:00
Alex Voinea
7e90047bba Use eeprom_update_block instead of a for loop 
Saves 32B
 2022-02-12 09:41:07 +01:00
Guðni Már Gilbert
4672b6444c
Merge branch 'MK3' into remove-eeprom-func 2022-02-11 19:32:11 +00:00
Alex Voinea
ea39a245af
Merge pull request #3388 from leptun/MK3_fix_broken_progmem_string 
Fix PRUSA commands
 2022-02-11 15:46:30 +01:00
3d-gussner
8e73bb030e Change to python3 
Bump up version
 2022-02-11 15:04:35 +01:00
Alex Voinea
3031f68d31 Fix Octoprint connect because of SN GET on blank einsy boards 2022-02-11 14:21:06 +01:00
ingbrzy
5b45553f38
add community SK 2022-02-11 13:31:43 +01:00
Alex Voinea
6689581364 Allow SN get only on the Einsy 2022-02-11 13:11:13 +01:00
Alex Voinea
489e4fd35c Fix PRUSA commands 2022-02-11 13:04:27 +01:00
ingbrzy
9f093ee404
typo 2022-02-11 12:49:41 +01:00
Alex Voinea
ed8252527c Add a uart RX timeout 2022-02-11 12:49:11 +01:00
Alex Voinea
426ab24c36 Let's not talk about this 2022-02-10 20:19:52 +01:00
Alex Voinea
bf45d4dcd1 Make the compiler align the lang reserved area to the spm page boundary 2022-02-10 20:19:52 +01:00
Alex Voinea
e358cb2b78 Fix DEBUG_SEC_LANG 2022-02-10 20:19:52 +01:00
ingbrzy
834cc24e6c Add SK language 2022-02-10 19:01:04 +01:00
Alex Voinea
882a73b867 VERBOSE_CHECK_HIT_ENDSTOPS 2022-02-10 16:42:02 +01:00
Alex Voinea
18dde3fb61 Faster code when endstops/probe are not enabled 2022-02-10 16:24:52 +01:00
Alex Voinea
42b91a83cd Merge branch 'MK3' into MK3_3.12_Optimizations 2022-02-10 10:36:31 +01:00
Alex Voinea
dee8da61f6 Optimize endstop flags even more 2022-02-10 10:35:25 +01:00
Alex Voinea
380377db0f Add static assert 2022-02-10 09:47:37 +01:00
Alex Voinea
060581962c Fix sizeof array look 2022-02-10 09:33:55 +01:00
Alex Voinea
e35b21569d
Merge pull request #3005 from wavexx/remove_mres_limits 
Allow all microstep resolutions for all axes
 2022-02-09 13:48:51 +01:00
Alex Voinea
6aaf784975
Merge pull request #3251 from gudnimg/farm-mode-setup-gudni 
Optimize `farm_mode` initialisation in `setup()`
 2022-02-09 13:48:12 +01:00
Alex Voinea
916212b597 Add ALLOW_ALL_MRES as requested in PR 2022-02-09 10:28:45 +01:00
Guðni Már Gilbert
c4f1023924 Add back second call to prusa_statistics(8) when farm_mode is enabled. 
Adds 18 bytes of flash
 2022-02-09 07:30:50 +00:00
Guðni Már Gilbert
caf496e996 Optimise FanCheck initialisation when farm mode is on 
Saves 12 bytes of flash memory (Arduino IDE 1.8.19)
 2022-02-09 07:26:34 +00:00
Alex Voinea
1342db3532
Merge pull request #3257 from gudnimg/lcd-optimisation-gudni 
Remove redundant operations on LCD CGRAM
 2022-02-09 08:09:48 +01:00
Alex Voinea
aab094ff4f
Merge pull request #3292 from gudnimg/fix-pinda-thermistor-build-fail 
Fix build error if `PINDA_THERMISTOR` is not defined
 2022-02-09 07:54:42 +01:00
3d-gussner
e6703125ec
Merge pull request #3268 from gudnimg/lcd_button_update_gudni 
Remove one call to `lcd_timeoutToStatus.start`
 2022-02-09 07:37:36 +01:00
Alex Voinea
0b7aa31b2a Fix MUL24x24R24 comment 2022-02-09 00:26:46 +01:00
Alex Voinea
5c0d2767a8 Move the test to the experimental menu 
.
 2022-02-08 11:18:09 +01:00
Alex Voinea
fb1c8ee0a3 Change the pullup test 2022-02-08 10:53:47 +01:00
3d-gussner
a4b605ba16 The Bed level correct menu is under Calibration so BACK is correct 2022-02-08 10:38:04 +01:00
3d-gussner
d80cef5443 Change [um] to [μm] 
Including lang-im/export.sh to convert HD44780 to UTF-8 and vice versa
 2022-02-08 10:18:27 +01:00
3d-gussner
881db2e747 Change MSG_YES to max. 4 chars 
Hungarian YES is 4 letters long
 2022-02-08 08:50:24 +01:00
3d-gussner
e7d7068840 Change MSG_WIZARD_DONE rows to 3 2022-02-08 08:46:07 +01:00
Alex Voinea
234add3c58 Merge branch 'MK3' into lcd-optimisation-gudni 2022-02-08 00:14:59 +01:00
Guðni Már Gilbert
121324d20b Revert "Remove one space from Support -> Temperatures menu" 
This reverts commit 158877e736.
 2022-02-08 00:09:09 +01:00
3d-gussner
8d0af30aa7 Update doxygen documentation 2022-02-07 19:41:14 +01:00
Alex Voinea
2b18357fef
Merge pull request #3375 from leptun/MK3_arduino_1.8.13 
Fix arduino 1.8.13 warnings
 2022-02-07 17:27:13 +01:00
Alex Voinea
9c3c47ea29
Merge pull request #3253 from gudnimg/sd-sub-dir-fix 
Fix edge case when SD card is inserted while user is inside the 'No SD card' submenu
 2022-02-07 17:09:14 +01:00
3d-gussner
75d6942d81
Merge pull request #2836 from wavexx/remove_jerk_limits 
Remove hard-coded X/Y jerk limits
 2022-02-07 17:04:49 +01:00
3d-gussner
0d4d386991
Merge pull request #3228 from gudnimg/remove-mmu_lcd 
Remove a few redundant lines from ultralcd code
 2022-02-07 17:04:34 +01:00
Alex Voinea
c06ec9d05b Add pullup error test to define 2022-02-07 13:56:46 +01:00
Alex Voinea
5d29c4fab2 Fix build for real this time 2022-02-07 13:49:56 +01:00
Alex Voinea
b3a53f6436
Fix build 2022-02-07 14:41:56 +02:00
3d-gussner
db79ae9d5e Forgot #ifdef DEBUG_PULLUP_CRASH 2022-02-07 13:31:55 +01:00
3d-gussner
0b8ecfbf7c Add Test Pullup Crash menu 2022-02-07 13:28:48 +01:00
Guðni Már Gilbert
ff00988303 Revert "Replace hardcoded values and optimise strings" 
This reverts commit e62bc4686f.
 2022-02-06 11:09:45 +01:00
Alex Voinea
670214a30b Fix indentation 2022-02-06 11:01:35 +01:00
Guðni Már Gilbert
c6ecc0dfc9
Merge branch 'prusa3d:MK3' into lcd-optimisation-gudni 2022-02-06 09:54:58 +00:00
Guðni Már Gilbert
c2bad473dc Optimise _menu_edit_P 
If the first if statement is true, then we don't need to check the next if statement.

Saves 64 bytes of flash memory
 2022-02-06 09:01:16 +00:00
Alex Voinea
70cb30208c Also change MUL24x24R24 to the new format and fix rounding 2022-02-06 01:11:22 +01:00
Alex Voinea
d06e74dd6f Fix Welcome message and language flashing 2022-02-05 23:44:24 +01:00
Guðni Már Gilbert
a22a7ea9d7 Change LCD_STR_UPLEVEL to LCD_STR_UPLEVEL[0] for consistency 
Saves 4 bytes of flash and 2 bytes of SRAM (Arduino IDE 1.8.19)
 2022-02-05 19:58:31 +00:00
Guðni Már Gilbert
d5b666d260 Add LCD_STR_SOLID_BLOCK to represent \xFF 2022-02-05 19:53:42 +00:00
Guðni Már Gilbert
976c8c4902 Change message from .c to .cpp 
The allows us to include lcd.h and replace hardcoded value with define LCD_STR_REFRESH

Also deleted a #define for bool which does not seem to be used.
 2022-02-05 18:57:18 +00:00
Guðni Már Gilbert
e62bc4686f Replace hardcoded values and optimise strings 
This commit saves 64 bytes of flash memory on my end
 2022-02-05 18:28:17 +00:00
Guðni Már Gilbert
19dc05597d Fix identation in PR 
Also combined the if statements that check farm_mode
If farm_mode is 0xFF then we can skip the next if statment.

No change in memory footprint
 2022-02-05 11:24:04 +00:00
Alex Voinea
274f198188 Fix typo from long ago 2022-02-04 16:28:49 +01:00
Alex Voinea
58867f6c06 Fix arduino 1.8.13 warnings 2022-02-04 15:53:49 +01:00
Alex Voinea
f068c3258f Pack endstop flags 2022-02-04 15:24:43 +01:00
Alex Voinea
21a0b53647 remove firstrun 2022-02-04 13:27:43 +01:00
Alex Voinea
858984ef35 SD sorting entries instead of positions 2022-02-04 10:47:56 +01:00
3d-gussner
22b3fbfe09 Deactivate translations haven't been merged or translated yet 2022-02-03 07:05:59 +01:00
Guðni Már Gilbert
1f3640ab26 Merge branch 'MK3_3.12_Optimizations' of https://github.com/leptun/Prusa-Firmware into MK3_3.12_Optimizations 2022-02-02 20:49:41 +00:00
Guðni Már Gilbert
43bf33e791 Optimise usage of code_value() 
code_value() is float but in some cases we can save memory when the expected output is only 1 or 2 bytes.

Changes save 182 bytes of flash memory on my end.
 2022-02-02 20:48:36 +00:00
Alex Voinea
f25bddce35 Simplify GETPC() 2022-02-02 21:06:58 +01:00
Alex Voinea
6ce7792045 Remove "hh" in fmt where it makes no difference 2022-02-02 20:58:21 +01:00
Guðni Már Gilbert
146b008186 Remove redundant variable farm_status 
It is unused and status_number variable can be used instead.
 2022-02-02 18:37:55 +00:00
Guðni Már Gilbert
459570ab66 Change prusa_stat_printerstatus parameter to uint8_t 
Also changes status_number global variable to uint8_t

Changes save 80 bytes of flash and 1 byte of SRAM (Arduino IDE 1.8.19)
 2022-02-02 18:35:52 +00:00
Guðni Már Gilbert
e525bcb7f5 Optimise lcd_selftest_screen input parameters and return type 
* _progress_scale is max 3 so it can be uint8_t
* _progress is max 6 so it can be uint8_t
* Change _delay type to uint16_t to be explicit

Changes save 102 bytes of flash memory (Arduino IDE 1.8.19)
 2022-02-01 18:57:43 +00:00
Guðni Már Gilbert
8681d84c44 Merge branch 'MK3_3.12_Optimizations' of https://github.com/leptun/Prusa-Firmware into MK3_3.12_Optimizations 2022-02-01 18:37:57 +00:00
Guðni Már Gilbert
53dfcf9d6f Optimise if-statments in world2machine_clamp 
Only one of the statements can be true: tmpx < X_MIN_POS or tmpx > X_MAX_POS.
So we can be a little bit smarter here and skip the second if statement if the first was true.

This saves 6 bytes of flash memory and potential some clock cycles
 2022-02-01 18:37:41 +00:00
Alex Voinea
aec2db7683 Optimize MUL8x16R8 2022-02-01 18:12:13 +01:00
Alex Voinea
b7806bf25f Crash if pullups get enabled on the thermistor inputs 2022-02-01 12:34:07 +01:00
Guðni Már Gilbert
c0e7e17fc3 Fix type of nrFiles 2022-01-30 13:07:09 +00:00
Alex Voinea
1523194d3b Fix build (merge conflict) 2022-01-30 13:18:07 +01:00
Alex Voinea
67e6361ff1 Fix temperature runaway variable types (merge conflict) 2022-01-30 13:16:05 +01:00
Guðni Már Gilbert
9bf45773f9 Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2 2022-01-30 11:43:16 +00:00
Alex Voinea
aae562e480 Fix G81 for loop 2022-01-30 11:39:29 +00:00
Guðni Már Gilbert
c081e1a5ae Loop index can be unsigned 
Saves 4 bytes of flash memory
 2022-01-30 11:39:29 +00:00
Guðni Már Gilbert
49693a9fb3 Remove undefined function 
No change in memory footprint.
 2022-01-30 11:39:29 +00:00
Guðni Már Gilbert
c705d4aa10 Change set_z() parameters to uin8_t 
Saves 24 bytes of flash
 2022-01-30 11:39:28 +00:00
Guðni Már Gilbert
581188ce2c Fix an issue found in code review 
Unfortunately this increases flash usages by 212 bytes (same usage as in current release) It seems it is most memory effcient to use int16_t (int). int8_t requires more memory.
 2022-01-30 11:39:28 +00:00
Guðni Már Gilbert
f8847edca6 Remove one unused variable 
Saves 1 byte of SRAM

The variable is only assigned a value but is never used.
 2022-01-30 11:39:28 +00:00
Guðni Már Gilbert
d8723c0eac Use code_value_uint8() in get_command() 
The if statement is simplified as the value is never negative
and we can get rid of one variable

Saves 12 bytes of flash memory
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
ac049c7e3c Use code_value_short() in get_command() 
Same code but uses a defined function

Saves 28 bytes of flash memory
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
052ecc3782 G81: Change for loop variables x and y to uint8_t 
Saves 198 bytes of flash, that's crazy
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
7787f17139 Smaller code in G28 
Replace two blocks of code with already defined functions.

Change saves 100 bytes of flash memory and 11 lines of code.
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
b835f31904 Remove variable move_menu_scale 
The variable is just set to 1.0 and is never modified, I also
removed the function lcd_move_menu_1mm()

Changes save 96 bytes of flash memory and 4 bytes of SRAM
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
a940c364c9 Create enum class for heating_status variable 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
2013295f94 Change farm_timer to uint8_t 
Remove extern declaration of farm_timer and farm_status as they
are only used in one file.

Saves 26 bytes of flash
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
a687173e02 Change custom_message_state_old and custom_message_state to uint8_t 
I see max value as 7*7+10 = 59

Saves 100 byte of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
60c9640602 Change heating_status_counter to uint8_t 
It has a max value of 14

Saves 28 bytes of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
22f23dff36 Change heating_status to uint8_t 
Saves 66 byte of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
2d614a8d41 Change usb_printing_counter to uint8_t 
It is assigned max value of 10

Saves 26 byte of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
aa0a86bf13 Remove internal Prusa command 'Beat' 
It doesn't seem to do anything.

Saves 22 bytes of flash
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
42778cae83 Remove unused kicktime timer 
The variable is only set and never actually used

Saves 8 bytes of flash and 4  bytes of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
ef8083a148 crashDetTimer can be ShortTimer 
Expired value is less than 65535

Saves 8 bytes of flash and 2 bytes of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
6a9bab02f7 Convert display_time to ShortTimer 
Saves 24 bytes of flash, 1 byte of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
802b8860c8 Convert mmu_last_finda_response to ShortTimer 
Saves 48 bytes of Flash, 1 byte of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
37fd9d1b11 Convert NcTime to ShortTimer 
The variable is only used in ultralcd.cpp so I made it static there
and deleted it from Marlin_main.cpp

Saves 24 bytes of flash and 1 byte of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
a1abd094dd Convert autostart_atmillis to ShortTimer 
Saves 34 bytes of flash and 1 byte of SRAM
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
762a5db125 Convert previous_millis_cmd to LongTimer 
Saves 196 bytes of Flash but adds 1 byte of SRAM
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
1cd9ecb2c7 Convert mmu_last_request and mmu_last_response to ShortTimer 
Saves 180 bytes of flash and 2 byte of SRAM
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
66782e9c9d setTargetHotend expect an uint8_t, not int for second parameter 
also change _usb_timer to ShortTimer

Saves 28 bytes of Flash and 1 byte of SRAM
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
77cce1fc05 Replace three lines by one function call which does the same thing 
Saves 42 bytes of flash memory
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
a26651e7aa Change return types of two functions uint8_t 
These functions aren't used but they should return the appropriate type.
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
800f44509d Change row_offsets[] to uint8_t 
Saves 10 bytes of flash, and 4 bytes of SRAM
 2022-01-30 11:39:24 +00:00
Guðni Már Gilbert
58213814cf Replace for-loop with memcpy 
Saves 22 bytes of flash memory
 2022-01-30 11:39:23 +00:00
Guðni Már Gilbert
52aa5a5f00 Use inlined function set_destination_to_current() in more places 
Saves 70 bytes of flash memory
 2022-01-30 11:39:23 +00:00
Guðni Már Gilbert
a8d16d2949 Use memset to zero previous_speed array 
Saves 150 bytes of flash memory
 2022-01-30 11:39:23 +00:00
Alex Voinea
cdd7ea30f4 Fix LUT loop 2022-01-30 11:39:23 +00:00
Alex Voinea
fb10b4398e Merge pull request #6 from gudnimg/gudni-PR1 
Purged some `int`s for `uint8_t` when using the axis enum
 2022-01-30 11:30:25 +00:00
Guðni Már Gilbert
f81db56793 temp_runaway_check() parameter _heater_id should be uint8_t 
Saves 58 bytes of flash
 2022-01-30 11:22:45 +00:00
Guðni Már Gilbert
261f311825 Change two arrays from int to uint8_t 
__preheat_counter has max value of 16
__preheat_errors has max value of 5

Saves 58 bytes of flash memory and 4 bytes of SRAM
 2022-01-30 11:22:45 +00:00
Guðni Már Gilbert
7535fa3a44 Remove unused variable 
Saves 2 bytes of SRAM
 2022-01-30 11:22:45 +00:00
Voinea Dragos
623762bd50 Fix build 2022-01-30 11:22:44 +00:00
Voinea Dragos
42a5f7dc20 Fix M226 2022-01-30 11:22:44 +00:00
Voinea Dragos
4aae88afdf M42 optimization 2022-01-30 11:22:44 +00:00
Voinea Dragos
a5cd99a917 Disable unimplemented PID_ADD_EXTRUSION_RATE 2022-01-30 11:22:44 +00:00
Voinea Dragos
9951e3da52 Sound enums as uint8_t 2022-01-30 11:22:44 +00:00
Voinea Dragos
6dd59985ee Disable PRUSA M28 2022-01-30 11:22:44 +00:00
Voinea Dragos
f22b9260ae Fix build 2022-01-30 11:22:44 +00:00
Voinea Dragos
9abae2fd97 Remove maxlimit_status 2022-01-30 11:22:43 +00:00
Voinea Dragos
9684806e00 Change arduino IO to fastio where possible 2022-01-30 11:22:43 +00:00
Voinea Dragos
42c393764f Adjust temperature runaway extruder count 2022-01-30 11:22:43 +00:00
Voinea Dragos
78362419da nIRsensorLastTime 2022-01-30 11:22:43 +00:00
Voinea Dragos
a5f1f23fe2 TimeNow && TimeSent 2022-01-30 11:22:43 +00:00
Voinea Dragos
f64c6c2a39 Remove unused Stepper.cpp variables 2022-01-30 11:22:43 +00:00
Voinea Dragos
9d1e54e685 Tmc2130 use ShortTimer instead of custom timer implementation 2022-01-30 11:22:43 +00:00
Voinea Dragos
d8a14842c5 Remove unused skip_debug_msg flag 2022-01-30 11:22:43 +00:00
Alex Voinea
4d348fa953 Initial Romanian translation 2022-01-17 16:21:59 +01:00
Alex Voinea
c09b732522 Reserve xflash space for the mmu update files 2022-01-17 12:03:12 +01:00
Alex Voinea
b72c027924 XFLASH layout explained 2022-01-17 11:46:14 +01:00
Alex Voinea
93b1a6b736 "Unload filament" c adjustment 2022-01-16 11:19:24 +01:00
Alex Voinea
1d491e772b
Expand maximum language count (#3345) 
* Expand maximum language count
 2022-01-13 16:01:36 +02:00