.. |
variants
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
adc.c
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
adc.h
|
new module adc (analog2digital)
|
2017-12-20 13:42:20 +01:00 |
BlinkM.cpp
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
BlinkM.h
|
Build 109
|
2017-11-16 22:03:36 +01:00 |
boards.h
|
MK3 configuration files, renamed EINY to EINSY
|
2018-02-01 17:10:41 +01:00 |
bootapp.c
|
New ML support - W25X20CL
|
2018-06-09 19:16:36 +02:00 |
bootapp.h
|
Do not skip bootloader when initiating reset by farm PRUSA RESET command.
|
2018-06-26 20:12:09 +02:00 |
cardreader.cpp
|
Revert "Use timer"
|
2018-07-17 11:38:38 +02:00 |
cardreader.h
|
Fixed forgotten comment
|
2018-05-30 13:39:24 +02:00 |
cmdqueue.cpp
|
resend request sends OK
|
2018-07-16 19:20:39 +02:00 |
cmdqueue.h
|
Crash detection/filament sensor: restore print from stored line number in case that we are printing over USB, retraction fix; debug: cmd queue on LCD
|
2018-06-05 20:28:41 +02:00 |
config.h
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
Configuration_adv.h
|
LCD menu optimalization - lcd and menu
|
2018-07-16 02:13:52 +02:00 |
Configuration.h
|
Revert "PowerPanic"
|
2018-07-20 15:20:57 +02:00 |
ConfigurationStore.cpp
|
max_feedrate and max_acceleration limitation (ConfigurationStore)
|
2018-07-21 12:33:29 +02:00 |
ConfigurationStore.h
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
conv2str.cpp
|
LCD menu optimalization - conversion functions - source separation
|
2018-07-16 17:23:35 +02:00 |
conv2str.h
|
LCD menu optimalization - conversion functions - source separation
|
2018-07-16 17:23:35 +02:00 |
Dcodes.cpp
|
Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20
|
2018-04-03 12:30:35 +02:00 |
Dcodes.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
doxyfile
|
Add .gitignore. Setup doxyfile. Create project documentation main page. Document property of static object constructors on gcc-avr.
|
2018-06-05 18:30:02 +02:00 |
fastio.h
|
WRITE_NC macro for non-critical (non-synchronized) access to
|
2018-01-12 20:15:59 +01:00 |
Firmware.ino
|
LCD menu optimalization - LiquidCrystal_Prusa removed
|
2018-07-16 23:23:15 +02:00 |
fsensor.cpp
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
fsensor.h
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
io_atmega2560.h
|
New ML support - added missing file
|
2018-06-08 15:38:16 +02:00 |
language.c
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
language.h
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
lcd.cpp
|
Revert "PowerPanic"
|
2018-07-20 15:20:57 +02:00 |
lcd.h
|
LCD menu optimalization - lcd_draw_edit removed
|
2018-07-19 16:57:31 +02:00 |
le.sh
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
Marlin_main.cpp
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
Marlin_main.cpp~RF6ca149ac.TMP
|
timeout when waiting for mmu OK
|
2018-07-18 16:17:45 +02:00 |
Marlin.h
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
MarlinSerial.cpp
|
Optimized LiquidCrystal class
|
2018-06-08 14:35:47 +02:00 |
MarlinSerial.h
|
New ML support - external flash W25X20CL - upgrade is working!!! (hardcoded to german)
|
2018-06-09 17:49:41 +02:00 |
menu.cpp
|
TMC2130 old style limits removed
|
2018-07-19 17:42:59 +02:00 |
menu.h
|
LCD menu optimalization - lcd_draw_edit removed
|
2018-07-19 16:57:31 +02:00 |
mesh_bed_calibration.cpp
|
LCD menu optimalization - print functions
|
2018-07-16 19:29:27 +02:00 |
mesh_bed_calibration.h
|
Show measured bed offset from expected position even if not homed. Remove redundant lcd_quick_feedback() calls.
|
2018-05-10 18:24:49 +02:00 |
mesh_bed_leveling.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
mesh_bed_leveling.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
messages.c
|
New ML support - W25X20CL - lang switching
|
2018-06-09 23:49:26 +02:00 |
messages.h
|
New ML support - W25X20CL - lang switching
|
2018-06-09 23:49:26 +02:00 |
motion_control.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
motion_control.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
optiboot_w25x20cl.cpp
|
New ML support - resized reserved space, skip optiboot durring sec_lang update process
|
2018-06-14 23:07:54 +02:00 |
optiboot_w25x20cl.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
pat9125.c
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
pat9125.h
|
PAT9125 optimalization (rewrited to C, 8bit sampling)
|
2018-07-12 18:11:07 +02:00 |
pins_Einsy_1_0.h
|
LCD menu optimalization - lcd and menu
|
2018-07-16 02:13:52 +02:00 |
pins_Rambo_1_0.h
|
LCD menu optimalization - lcd and menu
|
2018-07-16 02:13:52 +02:00 |
pins_Rambo_1_3.h
|
LCD menu optimalization - lcd and menu
|
2018-07-16 02:13:52 +02:00 |
pins.h
|
Add files via upload
|
2018-04-25 18:47:19 +00:00 |
planner.cpp
|
TMC2130 feedrate and acceleration limitation - separate profiles for normal and stealth mode
|
2018-07-19 18:56:01 +02:00 |
planner.h
|
TMC2130 feedrate and acceleration limitation - separate profiles for normal and stealth mode
|
2018-07-19 18:56:01 +02:00 |
printers.h
|
whitespace
|
2018-02-22 00:11:17 +01:00 |
qr_solve.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
qr_solve.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
rbuf.c
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
rbuf.h
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
Sd2Card.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
Sd2Card.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
Sd2PinMap.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdBaseFile.cpp
|
first working version
|
2017-11-27 06:20:51 +01:00 |
SdBaseFile.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdFatConfig.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
SdFatStructs.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
SdFatUtil.cpp
|
3.0.10 sync
|
2017-03-24 19:47:50 +01:00 |
SdFatUtil.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdFile.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdFile.h
|
Optimized LiquidCrystal class
|
2018-06-08 14:35:47 +02:00 |
SdInfo.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdVolume.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
SdVolume.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
Servo.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
Servo.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
sm4.c
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
sm4.h
|
New XYZ calibration with image processing
|
2018-03-13 12:55:35 +01:00 |
speed_lookuptable.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
spi.c
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
spi.h
|
New ML support - W25X20CL external spi flash support
|
2018-06-08 00:20:28 +02:00 |
stepper.cpp
|
FSensor - M600 fix + cond. translation + tunning filter and params
|
2018-07-22 16:14:13 +02:00 |
stepper.h
|
Removed unused files (ST7565R-dogm, digipot)
|
2018-03-29 23:01:13 +02:00 |
stk500.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
swi2c.c
|
SWI2C for PAT9125 simplified/optimized
|
2018-07-12 17:55:38 +02:00 |
swi2c.h
|
SWI2C for PAT9125 simplified/optimized
|
2018-07-12 17:55:38 +02:00 |
swspi.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
swspi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
temperature.cpp
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
temperature.h
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
thermistortables.h
|
New ML support - menu tunning, startup
|
2018-06-10 16:04:32 +02:00 |
Timer.cpp
|
Revert changes in Timer class; disable safety timer in handleSafetyTimer function if safetytimer inactive time was set to zero
|
2018-06-14 13:14:14 +02:00 |
Timer.h
|
Store timer period in TimerRemaining.
|
2018-06-11 23:41:36 +02:00 |
TimerRemaining.h
|
Fix off by one error in TimerRemaining::remaining(). Add test cases for Timer.
|
2018-06-12 02:24:52 +02:00 |
tmc2130.cpp
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
tmc2130.h
|
TMC2130 gcodes for live motor tunning:
|
2018-07-09 16:44:10 +02:00 |
uart2.c
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
uart2.h
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
ultralcd.cpp
|
Menu extruder info fixed
|
2018-07-23 12:54:48 +02:00 |
ultralcd.h
|
FSensor - code cleaning + simplification
|
2018-07-20 23:48:00 +02:00 |
uni_avr_rpi.h
|
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"
|
2018-07-17 11:28:44 +02:00 |
util.cpp
|
LCD menu optimalization - print functions
|
2018-07-16 19:29:27 +02:00 |
util.h
|
force selftest if user upgraded from 3.1.2-RC1 or older fw version
|
2018-02-27 17:52:13 +01:00 |
vector_3.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
vector_3.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
w25x20cl.c
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
w25x20cl.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
xyzcal.cpp
|
New localization - macro declarations fixed
|
2018-05-20 13:15:46 +02:00 |
xyzcal.h
|
XYZ calibration - accuracy improvement
|
2018-03-27 17:27:41 +02:00 |