Alessandro Ranellucci
|
68c2ac601b
|
Bump version number
|
2012-11-05 23:38:55 +01:00 |
|
Alessandro Ranellucci
|
ed100c477c
|
Releasing 0.9.4
|
2012-11-05 17:52:08 +01:00 |
|
Alessandro Ranellucci
|
0bff8ad576
|
Bugfix: some multimaterial files generated a fatal error
|
2012-11-05 15:59:31 +01:00 |
|
Alessandro Ranellucci
|
0a912c6316
|
Only apply min_skirt_length on bottom layer
|
2012-11-05 14:26:55 +01:00 |
|
Alessandro Ranellucci
|
ab6b611123
|
New post-processing script to calculate flow information from G-code
|
2012-11-05 11:53:32 +01:00 |
|
Alessandro Ranellucci
|
68e1edab80
|
Require Math::Clipper 1.14 and increase scale factor for offset(). #720
|
2012-11-05 00:17:46 +01:00 |
|
Mark Hindess
|
705d6b3179
|
Quick fix for support material.
|
2012-11-02 22:39:08 +00:00 |
|
Alessandro Ranellucci
|
d67c07bd47
|
Fix typo causing incomplete honeycomb infill after recent refactoring
|
2012-11-01 18:32:35 +01:00 |
|
Alessandro Ranellucci
|
93a8391e18
|
Alternate gaps fill direction
|
2012-11-01 11:53:18 +01:00 |
|
Alessandro Ranellucci
|
37c0b45187
|
Detect gaps even after the desired number of perimeters has been generated
|
2012-11-01 11:51:52 +01:00 |
|
Alessandro Ranellucci
|
cb4ede7f9e
|
Do not pass the Print object to SVG::output anymore
|
2012-11-01 11:34:53 +01:00 |
|
Alessandro Ranellucci
|
554d10c854
|
Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)
|
2012-10-31 19:08:29 +01:00 |
|
Alessandro Ranellucci
|
d4ccd39ad3
|
Minor code cleanup
|
2012-10-30 15:53:01 +01:00 |
|
Alessandro Ranellucci
|
92ab53868e
|
Remove unused methods
|
2012-10-30 15:49:11 +01:00 |
|
Alessandro Ranellucci
|
44d91774a6
|
Get rid of useless Slic3r::Fill instances
|
2012-10-30 15:38:17 +01:00 |
|
Alessandro Ranellucci
|
cec7bf815c
|
Get rid of the ExtrusionLoop objects in concentric filler
|
2012-10-30 15:29:13 +01:00 |
|
Alessandro Ranellucci
|
20e73face2
|
Get rid of max_print_dimension in filler objects
|
2012-10-30 15:09:54 +01:00 |
|
Alessandro Ranellucci
|
6c97e588b1
|
Don't require the print object in filler objects
|
2012-10-30 14:34:41 +01:00 |
|
Alessandro Ranellucci
|
5943114574
|
Only take layer_id instead of layer in filler objects
|
2012-10-30 14:25:48 +01:00 |
|
Alessandro Ranellucci
|
61047f0df5
|
Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate
|
2012-10-30 14:21:59 +01:00 |
|
Alessandro Ranellucci
|
610862a97f
|
Use the actual flow spacing for clipping concentric loops
|
2012-10-30 14:17:30 +01:00 |
|
Alessandro Ranellucci
|
0a5016a509
|
Cleaner usage of the PI constant
|
2012-10-30 14:15:48 +01:00 |
|
Alessandro Ranellucci
|
25d88bddff
|
Remove the change_layer method
|
2012-10-30 14:11:32 +01:00 |
|
Alessandro Ranellucci
|
52ed2c6ea4
|
Make flow_spacing required for ExtrusionLoop objects too
|
2012-10-30 14:07:50 +01:00 |
|
Alessandro Ranellucci
|
be7e211bb6
|
Make flow_spacing required for ExtrusionPath objects
|
2012-10-30 14:07:01 +01:00 |
|
Alessandro Ranellucci
|
37637c34f5
|
Refactor shortest_path
|
2012-10-30 13:59:33 +01:00 |
|
Alessandro Ranellucci
|
4c6fe0b3d4
|
Fixed regression preventing lift to work correctly
|
2012-10-30 10:45:55 +01:00 |
|
Alessandro Ranellucci
|
887634e1e2
|
Use G92 to apply Z offset. #486
|
2012-10-29 19:54:04 +01:00 |
|
Alessandro Ranellucci
|
709cbc1c15
|
Fixed regression causing support material generation to fail under threaded perls
|
2012-10-29 19:38:40 +01:00 |
|
Alessandro Ranellucci
|
df4dcf0534
|
Move by 30° instead of 45° when completing an external loop. #186
|
2012-10-29 11:21:41 +01:00 |
|
Alessandro Ranellucci
|
9b94a661d9
|
Fixed regression causing too much clipping at the endpoints of loops
|
2012-10-29 11:20:27 +01:00 |
|
Alessandro Ranellucci
|
e9ae62a9d1
|
New --min-skirt-length option. #269
|
2012-10-29 11:17:57 +01:00 |
|
Alessandro Ranellucci
|
c25e54a830
|
Expose perimeter/infill/support material extrusion widths in G-code comments
|
2012-10-29 00:31:25 +01:00 |
|
Alessandro Ranellucci
|
f2389682b6
|
Factor out some hard-coded settings
|
2012-10-29 00:23:33 +01:00 |
|
Alessandro Ranellucci
|
1ecadc10fb
|
Fixed regression causing one perimeter to be generated even when perimeters where set to 0. #759
|
2012-10-28 19:27:54 +01:00 |
|
Alessandro Ranellucci
|
8da4151c6d
|
Fix regression causing skirt to be printed at Z = 0 after a recent commit
|
2012-10-28 19:24:24 +01:00 |
|
Alessandro Ranellucci
|
c57e94c065
|
Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186
|
2012-10-28 19:15:34 +01:00 |
|
Alessandro Ranellucci
|
ecd054a57c
|
Don't emit T0 at the beginning of the file, so that it's generated automatically just right before starting the print
|
2012-10-28 17:29:01 +01:00 |
|
Alessandro Ranellucci
|
935173047a
|
Allow [print_center_X] and [print_center_Y] syntax for all coordinates settings (including bed_center etc.) and [temperature_0], [temperature_1] etc. for all index-based settings
|
2012-10-28 17:23:35 +01:00 |
|
Alessandro Ranellucci
|
ccb49a8439
|
Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea)
|
2012-10-28 16:59:20 +01:00 |
|
Alessandro Ranellucci
|
b5bd216f5c
|
Do not combine infill for bottom layer
|
2012-10-28 14:23:47 +01:00 |
|
Alessandro Ranellucci
|
f35cdef2aa
|
Renamed ExtrusionPath->depth_layers to height
|
2012-10-28 14:22:51 +01:00 |
|
Alessandro Ranellucci
|
2796041a6c
|
Bugfix: --top-solid-layers was ignored. #769
|
2012-10-28 12:52:53 +01:00 |
|
Alessandro Ranellucci
|
deea02b444
|
Descriptive textual feedback for cooling settings
|
2012-10-28 12:43:41 +01:00 |
|
Alessandro Ranellucci
|
f9b6caaecb
|
Bugfix, last commit was incomplete
|
2012-10-28 12:22:30 +01:00 |
|
Alessandro Ranellucci
|
a0fe93e8cf
|
Bugfix: sometimes first layer extrusion width was not applied
|
2012-10-28 10:28:40 +01:00 |
|
Alessandro Ranellucci
|
49916b6178
|
Revert 2bcac88683 by setting the scale factor manually to 1. #720
|
2012-10-27 22:09:22 +02:00 |
|
Alessandro Ranellucci
|
d0bee4bf41
|
Fixed regression in Split. #766
|
2012-10-27 21:39:57 +02:00 |
|
Alessandro Ranellucci
|
bc9ff848dd
|
Removed unused 'propgrid' import group from Wx. #764
|
2012-10-27 21:21:18 +02:00 |
|
Alessandro Ranellucci
|
f9e20db156
|
Update t/dynamic.t
|
2012-10-27 21:20:32 +02:00 |
|