Alessandro Ranellucci
68c3a0dd61
Make arcs.t happy. #721
2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
33b1970b95
Incomplete commit broke the plater on threaded perls
2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
0990a9418c
Bugfix: honeycomb infill was overlapping too much with perimeters. #732
2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
3c7785aaf3
Useless extra perimeters were generated sometimes. #444 #732
2012-10-22 13:21:11 +02:00
Alessandro Ranellucci
76f75db055
Always specify tool number in M104/M109 when printing with multiple extruders
2012-10-21 21:44:06 +02:00
Alessandro Ranellucci
4f1b56f004
Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints
2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173
Merge pull request #722 from mesheldrake/remove-dups-before-hull
...
use remove_coinciding_points before convex_hull
2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
149d9e737b
Merge pull request #721 from mesheldrake/parallel-degrees-limit
...
parallel_degrees_limit decreased, 3 to 0.1, #704
2012-10-15 02:48:16 -07:00
Alessandro Ranellucci
50161497f3
Merge pull request #720 from mesheldrake/increase-offset-scale
...
Increase scale factor for Clipper::offset
2012-10-15 02:47:16 -07:00
Alessandro Ranellucci
6b4f038d17
Update copies number when decreasing parts. #747
2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
769134bb6f
Fixed regression causing skirt ignoring the first layer extrusion width override. #728
2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7
If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer
2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
048e58c071
Update file_info.pl after the recent introduction of Slic3r::Model
2012-10-13 19:03:08 +02:00
Alessandro Ranellucci
d1e0bcf113
Bugfix: tool numbers written in G-code were wrong
2012-10-01 18:22:35 +02:00
Alessandro Ranellucci
1a6eaeaa91
Bugfix: split wasn't working properly under threaded perls
2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8
Removed useless warning
2012-10-01 16:49:02 +02:00
Alessandro Ranellucci
faaf6d90b8
Bump version number
2012-09-28 17:44:38 +02:00
Alessandro Ranellucci
6bb4c28b01
Release 0.9.3
2012-09-28 17:06:19 +02:00
Alessandro Ranellucci
86e3508402
Add menu item pointing to documentation
2012-09-28 16:58:03 +02:00
Alessandro Ranellucci
22b312395a
Fix SVG/DLP support material. #673
2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
c68862582c
Fix fatal error on empty layers caused by recent large refactorings
2012-09-28 15:48:32 +02:00
Alessandro Ranellucci
ab7697ec1c
New option to force a solid layer every given number of layers. #617
2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef
Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639
2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73
Output an error if user tries to use 100% density with a non-solid fill pattern. #691
2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4
Do not call srand for each layer, to get better randomization of starting points. #694
2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd
use remove_coinciding_points before convex_hull
...
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916
$parallel_degrees_limit decreased, 3 to 0.1, #704
...
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683
Increase scale factor for Clipper::offset
...
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700 , #702 and #703 . There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
02b11fb49a
Merge pull request #717 from triffid/post-processing-scripts
...
Post processing scripts
2012-09-26 02:14:20 -07:00
Michael Moon
31585e96b0
decimate script- removes tiny lines from prints that can cause blobbing
2012-09-26 18:50:03 +10:00
Michael Moon
ab103b0c12
a few minor updates for z-every-line
2012-09-26 18:49:42 +10:00
Alessandro Ranellucci
36a5af831c
Fix MANIFEST, materials were renamed to regions
2012-09-25 20:45:32 +02:00
Alessandro Ranellucci
fd74577eae
Fix typo in previous commit
2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
d8c192ae05
Fix fatal error caused by recent refactorings
2012-09-23 18:07:44 +02:00
Alessandro Ranellucci
1f4706f02f
[print_preset] and others were erroneously renamed to [print] etc. #675
2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
c33333cfd8
Fix t/fill.t
2012-09-23 14:51:03 +02:00
Alessandro Ranellucci
77625894ff
New command to combine multiple STL files into a single multi-material AMF file
2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
bbe0a45b58
Optimization: cache scaled flow width and spacing
2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db
Rename materials to regions
2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8
Assign extruders and flows to materials
2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb
Fix positioning and other things
2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243
More work (breaks centering and internal surfaces detection)
2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613
Large refactoring to allow processing multimaterial files
2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b
Refactoring: move the 'copies' property to each Print::Object
2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
82ac4722d2
Refactoring, new size_3D function
2012-09-22 16:12:54 +02:00
Alessandro Ranellucci
b5672de3ca
Refactoring, new bounding_box_3D function
2012-09-22 16:10:24 +02:00
Alessandro Ranellucci
35e449e891
Make new plater compatible with threaded perls
2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
037be34b7b
Bugfix: removed fatal error when generating SVG support material in some circumstances. #673
2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
c6c7dd12da
Silently ignore threads > 1 on non-threaded perls
2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
27b71d8885
Little regressions after recent merge
2012-09-21 16:08:22 +02:00
