bubnikv
95ede7c4b8
Rewrote Fill2.pm to C++, deleted Perl infills for good.
...
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
2016-11-02 10:47:00 +01:00
bubnikv
4e66ed81d2
Fixed the fill density for rectilinear, triangular and cubic infills.
...
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
2016-10-27 17:03:57 +02:00
bubnikv
4524ecf66b
by alexrj: Always convert strings to UTF-8 before passing them to XS
2016-10-24 14:08:22 +02:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66
Unified the creation of paths of debugging output files
...
pointing to a predefined output directory.
2016-10-21 10:18:01 +02:00
bubnikv
f788f50b5a
Disabled asserts in the release build (-DNDEBUG).
...
Added a safe variant of offset(const Slic3r::ExPolygon...), which offsets each loop separately.
New functions "remove_sticks" to remove zero area parts of polygons.
New functions "remove_small" and "remove_degenerate" for polygon clean up.
Extended the C++ supports, those are not finalized yet though.
2016-10-20 13:04:23 +02:00
bubnikv
53907a9cfe
Fix of a crash when setting a viewport over an empty platter.
...
Exported bounding box 'empty' method to perl.
2016-10-18 16:44:05 +02:00
bubnikv
7d7f093120
C++ supports sketched, but not finalized yet. Slic3r is still using
...
the old Perl supports, but this time with the C++ fillers.
2016-10-16 16:30:56 +02:00
bubnikv
3a81e6bee4
Bugfix of bottom bridges. If close regions shall be closed by bridges,
...
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
2016-09-30 15:23:18 +02:00
bubnikv
403329db49
Misc bugfixes.
2016-09-26 13:58:47 +02:00
bubnikv
790b640521
Visualization of fill surfaces.
2016-09-26 13:56:24 +02:00
bubnikv
e0d1aa8a1a
Collect the perimeter surfaces when generating perimeters.
...
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
2016-09-26 13:44:23 +02:00
bubnikv
620c6c7378
Ported from the playground branch. Various documentation and optimization.
2016-09-13 13:30:00 +02:00
bubnikv
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
bubnikv
9fcc8fe9ae
Meged with release_candidate_1_3
2016-09-12 11:29:39 +02:00
Alessandro Ranellucci
9e8022f6f6
More refactoring to medial axis and gap fill, more robust
2016-05-20 17:03:57 +02:00
Vojtech Bubnik
d022493297
Merge remote-tracking branch 'upstream/master'
2016-05-03 22:05:31 +02:00
bubnikv
f767ce816b
Optimized and improved rectilinear fill.
2016-04-13 20:45:44 +02:00
Chow Loong Jin
3d73fbf5fd
Use float for elapsed_time
...
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
2016-04-13 01:13:42 +08:00
bubnikv
ed83ff37f8
Simulation of extrusion in a plane, useful for finding out under / over-extruions.
2016-04-11 17:10:13 +02:00
bubnikv
9716ee8eca
Interface to a filler, ported from Perl to C++.
2016-04-11 17:09:15 +02:00
bubnikv
7da68c91a5
Vojtech likes to use Sublime on Windows to get the wheels rolling.
2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
660b56acb5
Fixed type error
2016-03-26 12:21:54 +01:00
Alessandro Ranellucci
7c8b71012c
Force the 'nearest' strategy for starting skirt loops
2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
934bd43e35
More refactoring on Config XS bindings
2015-12-16 12:58:06 +01:00
Alessandro Ranellucci
3c862836f2
Refactored the Config XS bindings
2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
e2f2761a00
One more fix for compilation
2015-12-08 11:07:45 +01:00
Alessandro Ranellucci
4913e90e10
Remove any Perl related code from libslic3r
2015-12-08 00:39:54 +01:00
Alessandro Ranellucci
3fac8cd77e
Large refactoring of the Config classes
2015-12-07 19:39:49 +01:00
Alessandro Ranellucci
7e1fac8f76
Separate libslic3r code from slic3r application code
2015-12-06 12:54:01 +01:00
Alessandro Ranellucci
e2b203ba8d
Disable screensaver while projecting (untested on Windows)
2015-12-04 21:25:45 +01:00
Alessandro Ranellucci
7523550066
Try to fix compilation on older Perls
2015-12-02 19:57:03 +01:00
Alessandro Ranellucci
1bebe6097b
Make test happy
2015-12-02 19:39:16 +01:00
Alessandro Ranellucci
4f8a18bbad
Ported Layer::maker_perimeters() to XS
2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
3a9cf91f83
Ported a couple more methods to XS
2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
ed75219215
Ported mode Model methods to XS
2015-12-02 18:06:18 +01:00
Alessandro Ranellucci
dfce3a3138
Ported _arrange() and arrange_object() to XS
2015-12-01 21:51:16 +01:00
Alessandro Ranellucci
9febb10bd7
Smoother manual control movements
2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
9a8724cdd0
More compilation changes for Win32
2015-11-06 11:51:24 +01:00
Alessandro Ranellucci
9f9b5afedb
Merge branch 'master' into sender
2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
61f0a9e4da
Replace the flip word with mirror. #3060
2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
f8d2c69713
Fixed compilation warnings and a potential bug in MotionPlanner, as reported in #3054
2015-11-04 20:50:32 +01:00
Alessandro Ranellucci
9ee6829ebc
Implemented connection timeout in C++
2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
fc1a7471cf
Several improvements to the print job queue
2015-11-02 01:18:05 +01:00
Alessandro Ranellucci
9b21ac877a
Merge branch 'master' into sender
...
Conflicts:
Build.PL
lib/Slic3r.pm
xs/MANIFEST
xs/src/libslic3r/PrintConfig.hpp
2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
9fcec10737
Finished porting LayerRegion to C++
2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
6ac79e3ed6
Ported make_perimeters() to C++
2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695
Finished porting PerimeterGenerator to C++
2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
3e739b87da
Finished porting Slic3r::GCode to XS (speed boost!)
2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf
Ported GCode::set_extruders() and GCode::change_layer() to XS
2015-07-02 19:33:08 +02:00
