Alessandro Ranellucci
|
fd43ada293
|
Remove duplicated "Generating skirt" status message
|
2014-01-18 16:36:13 +01:00 |
|
Alessandro Ranellucci
|
bc832f1a6d
|
Updated MANIFEST with Boost files
|
2014-01-18 14:37:17 +01:00 |
|
Alessandro Ranellucci
|
90194ee581
|
Fix overflow in Point::ccw() affecting convex hull generation. Includes regression test
|
2014-01-17 14:49:51 +01:00 |
|
Alessandro Ranellucci
|
0d7f0705f0
|
Fix overflow in distance_to(Line*). It was affecting Douglas-Peucker causing massive loss of geometry. Includes regression test and a couple wkt() implementations
|
2014-01-17 14:22:37 +01:00 |
|
Alessandro Ranellucci
|
3a3e53b59b
|
Fixed some obvious mistakes and applied strict type checking to SurfaceCollections too
|
2014-01-16 19:02:50 +01:00 |
|
Alessandro Ranellucci
|
a831f5b176
|
Refactor loop building code to make_loops()
|
2014-01-16 11:38:17 +01:00 |
|
Alessandro Ranellucci
|
86f91bb3c4
|
New TriangleMeshSlicer::cut() method
|
2014-01-16 11:25:26 +01:00 |
|
Alessandro Ranellucci
|
519ed91c68
|
Refactored mesh slicing code into a new TriangleMeshSlicer class
|
2014-01-15 20:31:38 +01:00 |
|
Alessandro Ranellucci
|
dfd9bc8958
|
Bugfix: prevent fatal error in the rare case that no bridge anchors are found. #1607
|
2014-01-15 00:24:37 +01:00 |
|
Alessandro Ranellucci
|
cfbbb539a5
|
Bugfix: fatal error in the rare case that a bridge has no anchor points. #1607
|
2014-01-15 00:20:09 +01:00 |
|
Alessandro Ranellucci
|
a40556ab56
|
Repair meshes after splitting
|
2014-01-14 22:06:28 +01:00 |
|
Alessandro Ranellucci
|
79a2bab261
|
Revert stupid change that broke plater and provide the correct fix for --info
|
2014-01-14 21:46:39 +01:00 |
|
Alessandro Ranellucci
|
28a39f0275
|
Fix garbage collection of recently added classes
|
2014-01-14 20:11:08 +01:00 |
|
Alessandro Ranellucci
|
66045faf81
|
Fix error in t/support.t
|
2014-01-14 13:41:39 +01:00 |
|
Alessandro Ranellucci
|
4da71e8f13
|
Fix tests in stable after stronger type checking was applied
|
2014-01-14 12:49:07 +01:00 |
|
Alessandro Ranellucci
|
fcaa3a03c2
|
Bugfix: incomplete slicing when a horizontal surface was tangent to the slicing plane and it shared an edge with an adjacent volume. #1672
|
2014-01-13 00:45:19 +01:00 |
|
Alessandro Ranellucci
|
b0a7baa454
|
Add a (failing) test for slicing at the same height of a horizontal surface attached to a volume. In this case, the loop isn't completed. #1672
|
2014-01-13 00:06:16 +01:00 |
|
Alessandro Ranellucci
|
3637ca39df
|
TriangleMesh::slice() now accepts a vector of floats instead of doubles for consistency with mesh coordinates
|
2014-01-12 23:56:07 +01:00 |
|
Alessandro Ranellucci
|
69f1f65a8b
|
Because of numerical instability, lower_bound() was not including a layer having z == 0.8 even if the facet's min_z == 0.8. #1672
|
2014-01-12 16:01:14 +01:00 |
|
Alessandro Ranellucci
|
bac743a602
|
Little cleanup to slice(): only used scaled coordinates in slicing instead of mixing them with unscaled
|
2014-01-12 14:48:51 +01:00 |
|
Alessandro Ranellucci
|
51af10da4f
|
Some fixes to config API
|
2014-01-12 12:35:13 +01:00 |
|
Alessandro Ranellucci
|
12b661e877
|
Adapt skirt logic to the potential situation of objects with different layer heights
|
2014-01-12 11:06:21 +01:00 |
|
Alessandro Ranellucci
|
a51743a8c1
|
Bugfix: lack of strong type checking when passing arrayref objects to XS caused random lack of infill. Now added strong type checking for all XS entities. Also fixes a potential issue with bridges caused by the same error. #1652
Conflicts:
lib/Slic3r/Layer/Region.pm
|
2014-01-12 00:54:10 +01:00 |
|
Alessandro Ranellucci
|
a64f7aa8df
|
Bugfix: lack of strong type checking when passing arrayref objects to XS caused random lack of infill. Now added strong type checking for all XS entities. Also fixes a potential issue with bridges caused by the same error. #1652
|
2014-01-12 00:46:23 +01:00 |
|
Alessandro Ranellucci
|
e68cbede6e
|
Add scale rotate duplicate_grid to @Ignore and fix @Ignore which was ignored
|
2014-01-11 23:46:20 +01:00 |
|
Alessandro Ranellucci
|
89d3dbaa5a
|
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
Conflicts:
lib/Slic3r/Print/Object.pm
|
2014-01-11 23:26:48 +01:00 |
|
Alessandro Ranellucci
|
130e8dd8e7
|
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
|
2014-01-11 23:16:33 +01:00 |
|
Alessandro Ranellucci
|
e7349622a2
|
Removed dependency on Storable; some fixes in Build.PL. #1693
|
2014-01-11 21:46:22 +01:00 |
|
Alessandro Ranellucci
|
c99b9d91db
|
Fix bug in regression infill causing bad clipping at very low layer heights. Includes regression test. #1669
Conflicts:
lib/Slic3r/Fill/Rectilinear.pm
|
2014-01-11 21:34:26 +01:00 |
|
Alessandro Ranellucci
|
26f0fab27a
|
Fix bug in regression infill causing bad clipping at very low layer heights. Includes regression test. #1669
|
2014-01-11 21:27:37 +01:00 |
|
Alessandro Ranellucci
|
b43ead06fe
|
Fix regression introduced by max width check
|
2014-01-11 18:41:44 +01:00 |
|
Alessandro Ranellucci
|
3084876e60
|
Fixed --info
|
2014-01-11 18:05:14 +01:00 |
|
Alessandro Ranellucci
|
ea173cf815
|
Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2014-01-11 17:40:09 +01:00 |
|
Alessandro Ranellucci
|
5c02bfd310
|
Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670
|
2014-01-11 17:26:53 +01:00 |
|
Alessandro Ranellucci
|
c0a74780cb
|
The ratio_over parameter was missing in the definition of first_layer_extrusion_width
|
2014-01-11 14:48:13 +01:00 |
|
Alessandro Ranellucci
|
ed3a6349c7
|
Adapt the new gcode.t test to master (and subtract final retraction from used filament length)
|
2014-01-11 14:42:31 +01:00 |
|
Alessandro Ranellucci
|
9515acf527
|
Put a hard limit on manually configured extrusion widths (10 * the largest nozzle diameter configured) to prevent confusion when a bad value is entered. #1691
Conflicts:
lib/Slic3r/Config.pm
|
2014-01-11 14:32:42 +01:00 |
|
Alessandro Ranellucci
|
a32f548a23
|
Put a hard limit on manually configured extrusion widths (10 * the largest nozzle diameter configured) to prevent confusion when a bad value is entered. #1691
|
2014-01-11 14:30:34 +01:00 |
|
Alessandro Ranellucci
|
529d1b19c3
|
Test that absolute_E is positive at the end of print (and document that it accounts for the final retraction)
|
2014-01-11 14:26:19 +01:00 |
|
Alessandro Ranellucci
|
bb50dfb9ba
|
Test that absolute_E is positive at the end of print (and document that it accounts for the final retraction)
|
2014-01-11 14:24:40 +01:00 |
|
Alessandro Ranellucci
|
15ef762e43
|
Fix failing XS test
|
2014-01-10 17:07:47 +01:00 |
|
Alessandro Ranellucci
|
170a7d24de
|
Fix failing XS test
|
2014-01-10 17:07:18 +01:00 |
|
Alessandro Ranellucci
|
7b0decbeb1
|
Finished implementing Boost.Polygon medial axis. Some cleanup needed
|
2014-01-10 16:18:55 +01:00 |
|
Alessandro Ranellucci
|
07a4c37c4c
|
Semi-working Boost.Polygon medial axis. Hangs after perimeters, though. Needs pruning and chaining
|
2014-01-10 11:47:16 +01:00 |
|
Alessandro Ranellucci
|
f9642786d3
|
More work to get Boost.Polygon to compile
|
2014-01-09 19:56:12 +01:00 |
|
Alessandro Ranellucci
|
bf91f3096a
|
Incomplete work for using Boost.Polygon to compute medial axis
|
2014-01-09 17:26:39 +01:00 |
|
Alessandro Ranellucci
|
11f065ca5e
|
New object dialog tab with list of materials and volumes
|
2014-01-08 19:36:41 +01:00 |
|
Alessandro Ranellucci
|
6da98a6ecc
|
Fix GUI
|
2014-01-07 19:08:37 +01:00 |
|
Alessandro Ranellucci
|
c8a48b4527
|
Implement modifier volumes and port _merge_loops() to XS
|
2014-01-07 15:40:38 +01:00 |
|
Alessandro Ranellucci
|
b17d06f9d1
|
Finished porting BoundingBox to XS
|
2014-01-07 12:48:09 +01:00 |
|