3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
15029 commits 1 branch 1 tag 249 MiB
Commit graph

2808 commits

Author SHA1 Message Date
Vojtech Bubnik
55c698feef WIP: Exporting 3MFs through a streaming interface. 2021-01-27 09:18:16 +01:00
enricoturri1966
a897dd0504 Disabled tech ENABLE_GCODE_VIEWER_STATISTICS 2021-01-26 13:56:32 +01:00
enricoturri1966
9304defe7c Tech ENABLE_UNSIGNED_SHORT_INDEX_BUFFER merged into tech ENABLE_SPLITTED_VERTEX_BUFFER 2021-01-26 13:32:27 +01:00
enricoturri1966
3533473256 Tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING merge into tech ENABLE_SPLITTED_VERTEX_BUFFER 2021-01-26 12:21:50 +01:00
enricoturri1966
9ede830f66 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-26 10:10:23 +01:00
Vojtech Bubnik
4620402ab4 WIP: Initial Fuzzy Skin implementaiton #2010 
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
 2021-01-26 09:29:34 +01:00
Vojtech Bubnik
eef800b5c4 FIXME on ExPolygon::overlaps(), which should be commutative. 2021-01-22 15:32:45 +01:00
enricoturri1966
97c31b2a34 ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it 2021-01-21 16:33:35 +01:00
enricoturri1966
5161643fc6 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-20 13:48:09 +01:00
enricoturri1966
ee40ab421a ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts 2021-01-20 13:47:48 +01:00
Vojtech Bubnik
6d7d482ca1 Fix of Extrusion Width Percentge #4631 
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
 2021-01-20 11:03:52 +01:00
Vojtech Bubnik
c506c15ed4 Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r, 
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829)
 2021-01-19 16:50:24 +01:00
Vojtech Bubnik
2bc6679a62 Partial revert of 1bffc2b99b 
(deriving the printer technology from the merged configs).
 2021-01-19 15:18:03 +01:00
Vojtech Bubnik
5294a48ee8 Fix of prusa 2.3.0 crash with 0.25 nozzle #5825 
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
 2021-01-19 09:58:14 +01:00
enricoturri1966
59cabc9712 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-18 09:59:26 +01:00
enricoturri1966
8f1bc02287 ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers 2021-01-18 09:59:05 +01:00
Vojtech Bubnik
59911e7c35 Slight improvement in Hilbert infill by using constexpr 2021-01-15 09:34:50 +01:00
Vojtech Bubnik
48877614e2 Fix of --scale-to-fit not accepting any input as valid (#5772) 
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
 2021-01-14 12:51:28 +01:00
enricoturri1966
dc781535b2 Code cleanup 2021-01-12 14:34:52 +01:00
enricoturri1966
250adabd5c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-12 08:10:17 +01:00
Vojtech Bubnik
7d751753bc Replaced __linux macro with __linux__ 2021-01-11 13:31:30 +01:00
Vojtech Bubnik
5a1a41096b Fix of a crash when slicing an object producing no layers and 
elphant foot compensation is enabled.
 2021-01-11 12:20:50 +01:00
enricoturri1966
77f6606771 Another refactoring in GCodeViewer::load_toolpaths() 2021-01-07 11:13:07 +01:00
enricoturri1966
676540279d Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-07 08:24:29 +01:00
Vojtech Bubnik
daa0bbdb0c Fix of slow update when dragging the vertical slider in G-code viewer 
with volumetric flow color mapping enabled.
Fixes "Volumetric flow rate computes very slowly #5572"
 2021-01-06 15:32:31 +01:00
Vojtech Bubnik
67256d6bb0 Added a FIXME comment for 
Sequential tool path ordering of multiple parts within the same object, aka. perimeter tracking (#5511)
 2021-01-06 12:19:08 +01:00
Vojtech Bubnik
93a5906a18 Fixed numerical issue with the new algorithm to connect infill lines 
with perimeters:
1) Increased accuracy of the contour length parametrization from
   float to double, as double should capture the difference of
   32bit coord_t with full accuracy (or at least very close).
2) The algorithm to insert the T-joint points into the infill perimeter
   contour was improved to avoid inserting duplicate points.
 2021-01-06 12:18:05 +01:00
Vojtech Bubnik
3c9f3d2b66 Fixing the infill order for concentric infill to outside-in. 
Relies to:
Concentric Fill Start Point - New Feature Request #4948
Feature Request: Archimedean Chords - Option to define direction of travel (Inside-Out or Outside-In) #5214
 2021-01-06 11:05:32 +01:00
Lukas Matena
e733565031 Fix of #5632 (painter gizmos not working correctly with scaled objects) 
This was broken since 8bcdbb7.
 2021-01-05 17:06:05 +01:00
Vojtěch Bubník
57d0f4b4f6
Merge pull request #5544 from hzeller/fix-assignment-of-charliteral-to-writable-charptr 
Fix assignment of string literals to char*.
 2021-01-05 13:11:29 +01:00
Vojtech Bubnik
fb29325b14 Fix of G-code Viewer not loading .gco files #5536 
".gcode", ".gco", ".g" and ".ngc" were considered to be G-code file
extensions by the G-code import / export file dialogs, but not by
various other functions. Now the G-code extension is tested by
a single function is_gcode_file(string).
 2021-01-05 12:26:11 +01:00
Vojtech Bubnik
1076e077ce Fix of Adaptive cubic infill weird behavior #5633 
Enabling reordering of infill paths for Support Cubic and Adaptive Cubic
infill types.
 2021-01-04 15:42:23 +01:00
Lukas Matena
30c8592b10 Do not use ironing extrusions for autospeed calculations (#5082) 2021-01-04 14:21:24 +01:00
enricoturri1966
4d3cb19423 5677 - GCodeProcessor accepts gcode line T-1 as valid for RepRapFirmware and RepRapSprinter 2021-01-04 14:21:24 +01:00
enricoturri1966
016042db10 Disabled tech ENABLE_RENDER_STATISTICS 2021-01-04 14:21:24 +01:00
Lukas Matena
837070a246 Hotfix of a crash with raft and one-layer object (#5652) 
The problem is that PrintObject support generator is only run when m_layers.size() > 1, so one-layer object will skip it.
It apparently never worked, after recent refactoring (probably 8bfc986) it started to crash in GCode generator.
This commit fixes the crash, but not the problem. The raft is still not generated (like in all versions since 2.0.0 at least).
 2021-01-04 14:21:24 +01:00
Lukas Matena
6c2ce4b6b6 Escape special xml characters when writing metadata into the model file 
This should fix #5577
 2021-01-04 14:21:24 +01:00
Vojtech Bubnik
2d428198b1 Fix of 2.3 rc1 can't load its own 3mf files (if they contain custom gcode) #5550 
The issue was handling of the special "default_filament_profile" vector,
which is not being normalized in length to the number of extruders,
as this vector is being shown to the user at the Printer dependencies page,
and we don't want to present empty fields there, if the default filament
profile was not defined in the system preset.
 2021-01-04 11:13:44 +01:00
Vojtech Bubnik
b002c1485d Fix of PrusaSlicer hangs on Linux when run with non standard task affinity #5661 2021-01-04 09:03:49 +01:00
Lukáš Hejl
dc2e7aeb4e Fixed wrong generation of Adaptive Cubic and Support Cubic infill when infill extrusion width is set in percent. 2020-12-21 14:14:06 +01:00
Lukáš Hejl
181642b85b Fix of #5528 - Request re-slicing when bottom_solid_layers changes and spiral_vase is enabled. 2020-12-21 09:15:33 +01:00
Henner Zeller
79e041b961 Fix assignment of string literals to char*. 
Fix some char *foo = "string literal" assignments that
really should be assigned to const char*.

(they also happen to be constexpr, but that only prevents
to assign something later to foo, but does not alter
the char* type).

Signed-off-by: Henner Zeller <h.zeller@acm.org>
 2020-12-20 13:40:25 -08:00
Lukas Matena
1cbe2bd87e Added a missing translation macro 2020-12-18 13:04:28 +01:00
Lukas Matena
8f3baeb1c9 Fix of #5410 (Ironing untick/tick bug) 
This is a follow-up of commit b1b7a5a which fixed several similar bugs
 2020-12-18 12:44:24 +01:00
Lukas Matena
6e3b4b6fd8 Random seam: optimization and fix of a possible infinite loop 2020-12-17 15:48:25 +01:00
enricoturri1966
ce32d68368 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-12-17 11:41:54 +01:00
enricoturri1966
b8fc1d3173 GCodeViewer - Fixed visualization of time estimates for silent mode 2020-12-17 11:41:41 +01:00
Vojtech Bubnik
ba9a9b4e7a Fixed buffer overflow in the OBJ parser. 
Improved error reporting on OBJ parser.
 2020-12-17 09:53:21 +01:00
Vojtech Bubnik
7df9f3e422 Improvements of OBJ parser robustness. 2020-12-17 09:17:07 +01:00
Vojtech Bubnik
4d459f37de Merge branch 'lm_230beta3_fixes' 2020-12-16 13:51:09 +01:00