3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
15,622 Commits 1 Branch 1 Tag 249 MiB
ff632a9ff2
Commit Graph

3047 Commits

Author SHA1 Message Date
enricoturri1966
ff632a9ff2 Tech ENABLE_ALLOW_NEGATIVE_Z-> Disable sinking objects for SLA printer 2021-05-06 14:04:07 +02:00
enricoturri1966
1c3090b11f Tech ENABLE_ALLOW_NEGATIVE_Z-> Layers height editing related fixes 2021-05-03 14:28:55 +02:00
enricoturri1966
c58572deaa Tech ENABLE_ALLOW_NEGATIVE_Z->Fixed object popping up after editing layer range fields 2021-04-28 11:07:15 +02:00
enricoturri1966
d4695827ce Tech ENABLE_ALLOW_NEGATIVE_Z -> Keep sinking instances as sinking after applying rotate gizmo 2021-04-23 08:29:29 +02:00
enricoturri1966
c8b83ae011 Tech ENABLE_ALLOW_NEGATIVE_Z -> Allow move gizmo to place an object under the printbed 2021-04-21 12:41:43 +02:00
Vojtech Bubnik
48a93e40fb After issuing the color change custom G-code, which is most likely 
just M600, reset the internal retract counter, so that a retract
will happen after the firmware returns from M600 to the initial position.

Fixes "Blobs on print after manual color change #6362"
 2021-04-15 16:29:30 +02:00
enricoturri1966
526233ca47 Modified version of automatic downscale on load of objects too big 2021-04-14 14:46:49 +02:00
Vojtech Bubnik
0625788583 Fixed obvious bug in move operator, discovered by clang lint ran by Tamas. 2021-04-14 14:25:30 +02:00
Vojtech Bubnik
c1179fc2c7 Marked the unsafe ClipperUtils offset functions with CLIPPERUTILS_UNSAFE_OFFSET 
Replaced some of the unsafe offset functions with safe variants.
Please test the
1) print bed from STL function
2) concentric infill
 2021-04-13 13:28:37 +02:00
Vojtech Bubnik
e8643125d8 Clipper / ClipperUtils: 
1) Let Clipper use int32_t for representing its coordinates. This
   reduces memory and allows to skip conversion between Slic3r Polygon
   and Clipper polygon.
2) Disable additional offset before executing the Clipper Offset algorithm.
   We don't see any reason for that and it required 64bit Clipper coordinates,
   which were disabled with 1).
 2021-04-13 11:31:54 +02:00
Vojtech Bubnik
dbd1c09523 FDM snug supports: New parameter "closing radius", inspired by Cura's 
support_join_distance
 2021-04-12 14:56:36 +02:00
Vojtech Bubnik
ef6ce8792d Fix of brim under supports 2021-04-08 16:36:52 +02:00
Vojtech Bubnik
8fd731f7a0 New FDM support sparse infill zig-zag algorithm. 
Fixed some old support and infill issues.

Fixes support problem #4295
Fixes Parts of interface layer extends beyond supports and cannot be printed
Fixes support missing under horizontal overhang #6058
Fixes Slicer double-traces small sections of Rectilinear Supports, causes
Fixes plastic buildup and nozzle crashes #4951
Fixes Add "Angle Interface layers" #2969
 2021-04-08 15:29:40 +02:00
tamasmeszaros
08ca5b29f0 Fix slow cancellation of rasterization step 
fixes #6253
 2021-04-08 14:36:37 +02:00
tamasmeszaros
e8af080346 Merge remote-tracking branch 'origin/tm_sl1_import_fix' 2021-04-07 13:56:14 +02:00
tamasmeszaros
bed3321324 Small improvement to "least supports" method 2021-04-07 12:51:02 +02:00
tamasmeszaros
773116b777 Allow auto-rotation of objects not completely inside bed. 
Don't use SLAPrintObject as the input for optimization. Use ModelObject and pass the print config to the optimization in RotoptimizeJob::prepare()
 2021-04-07 12:51:02 +02:00
tamasmeszaros
5443f77489 Increase performance of "best misalignment" method 2021-04-07 12:51:02 +02:00
tamasmeszaros
f3e3aabec7 Least supports optimization revived. 
Fix missing include on Win32


Cleanup benchmarking code
 2021-04-07 12:51:02 +02:00
tamasmeszaros
0194094afa Method selection implemented 2021-04-07 12:51:02 +02:00
tamasmeszaros
4eb13a407f Extend execution framework with convenience functions 2021-04-07 12:51:02 +02:00
tamasmeszaros
46fd722f3c Unite cancel callback and status function 2021-04-07 12:51:02 +02:00
tamasmeszaros
de8bb00fa9 Speed up rotation optimizer 
- No float to double conversion
- Solving issue of random (very similar) results due to the parallel summation of floats
 2021-04-07 12:51:02 +02:00
tamasmeszaros
7760d3fbc4 Add new execution framework 
Inspired by std::execution
 2021-04-07 12:51:02 +02:00
tamasmeszaros
4293a68aaa Reverting to old rotation optimizer object-function. 
Keep the performance optimizations though
 2021-04-07 12:51:02 +02:00
tamasmeszaros
9aac1b6fa5 Fix issue with importing sl1 files with non-ascii filenames. 2021-04-07 12:41:38 +02:00
Lukas Matena
9660d35f8c An attempt to fix time estimates for 'Marlin (legacy)' flavor 
Old M204 S sets both printing and travel accelerations, which must be
accounted for now when the latter was separated.
 2021-04-06 15:45:49 +02:00
enricoturri1966
9b2d9fb01a GCodeProcessor added travel acceleration 2021-04-06 15:45:49 +02:00
enricoturri1966
52af90ed8f GCodeProcessor use new flavor gcfMarlinFirmware 2021-04-06 15:45:49 +02:00
Lukas Matena
8c89bf748b Implemented new acceleration control behaviour for the new Marlin firmware flavor: 
- show extra travel acceleration settings in 'Machine limits' page in Printer Settings
    when the new firmware flavor is selected

- updated tooltips on the config values (they were basically wrong even in the current version)

- 'Marlin (legacy)' firmware flavor behaviour should not change: it exports M204 Pa Rb Ta
    (where a, b are the values from machine limits) at the beginning of gcode and it uses
    M204 S... for feature type dependent acceleration settings (legacy variant of M204 P.. T..)

- new Marlin Firmware exports M204 Pa Rb Tc (where a,b,c are the values from machine limits).
    Feature type dependent acceleration is set using M204 P..., not overriding the travel acceleration.
 2021-04-06 15:45:49 +02:00
Lukas Matena
f0e9ad46ec Renamed the gcfMarlin enum value to gcfMarlinLegacy so we never mistake it for the new one 
There should be no functional change.
 2021-04-06 15:45:49 +02:00
Lukas Matena
151a76ee92 Duplicated Marlin firmware flavor to 'Marlin (legacy)' and 'Marlin Firmware' 
The two flavors should be identical after this commit, except that GCodeProcessor.cpp was not updated. This shall be done in a later step.
 2021-04-06 15:45:49 +02:00
Lukas Matena
58a811a638 Wipe tower: correctly detect first layer even with 'No sparse layers' option enabled 2021-04-06 15:37:39 +02:00
Lukas Matena
43d9e38325 Wipe tower: reorder extruders so first layer starts with soluble if possible 
That way it will not be wiped on first layer
 2021-04-06 15:37:39 +02:00
Lukas Matena
5d636ab853 Wipe tower: respect first_layer_speed 2021-04-06 15:37:39 +02:00
Lukas Matena
3459231111 Wipe tower: set travel feedrate for a move from custom toolchange position to the wipe tower (#5483) 2021-04-05 23:39:27 +02:00
Lukas Matena
67bc2e472f Wipe tower: fix wipe moves after recent changes 2021-04-05 23:39:27 +02:00
Lukas Matena
a6ddab856b Wipe tower: refactoring of brim and solid infill on first layer 2021-04-05 23:39:27 +02:00
Lukas Matena
f6de946dd7 Wipe tower: don't use soluble filament for perimeters, sparse infill or first layer 2021-04-05 23:39:27 +02:00
Lukas Matena
3ed68ac28a Wipe tower: slightly changed finish_layer logic so it can be called after any toolchange 2021-04-05 23:39:27 +02:00
Lukas Matena
cc7ef40e20 Wipe tower: remove unfinished square wipe tower option 2021-04-05 23:39:27 +02:00
Lukas Matena
97c4c02001 Wipe tower: don't do sparse infill when there is a soluble filament above it 2021-04-05 23:39:27 +02:00
enricoturri1966
ab3890dab5 Follow-up of 3fce8398f0 - Fixed build warnings 2021-03-31 08:54:58 +02:00
enricoturri1966
3fce8398f0 Follow-up of 6ffa51da58 - Modified export of final M73 lines for remaining time to next printer stop accordingly to firmware specifications 2021-03-30 09:59:10 +02:00
Vojtech Bubnik
acce99f29b Fixed some compilation warnings in MutablePolygon.cpp 2021-03-29 14:15:18 +02:00
enricoturri1966
68303059a6 Extract bed size from gcode produced with Simplify3d 2021-03-25 09:23:14 +01:00
enricoturri1966
cfcce6f29a Follow-up of 10c3e82917 - Updated version for unpublished techs in Technologies.hpp 2021-03-24 14:30:46 +01:00
enricoturri1966
645e5b6862 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_extended_m73 2021-03-24 12:05:36 +01:00
enricoturri1966
9c951b3108 Fixed parsing of g-code files generated by newer versions of Simplify3D 2021-03-24 11:36:16 +01:00
enricoturri1966
a0feb0f652 Preview and G-code viewer - Fixed synchronization between markers for pause print, color changes, custom g-code, retractions, deretractions and current line shown in g-code window 2021-03-23 12:46:04 +01:00