3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-29 23:07:42 +00:00
Code Issues Releases Wiki Activity
10,212 Commits 21 Branches 81 Tags 1.9 GiB
8c9318c5a3
Commit Graph

8511 Commits

Author SHA1 Message Date
Scott Lahteine
be3e006fc8 Fix G33 compile warning 2018-06-29 23:20:59 -05:00
Scott Lahteine
654f0bed25
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11146) 2018-06-29 22:41:56 -05:00
Scott Lahteine
609e7da3f3
Fix and tweak POWER_LOSS_RECOVERY (#11150) 2018-06-29 22:40:49 -05:00
Scott Lahteine
67475374ae Fix SKEW_CORRECTION compile error 2018-06-29 19:37:47 -05:00
Scott Lahteine
485d50ecb0 Ignore Z min endstop with separate Z probe 
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
 2018-06-28 05:09:45 -05:00
Scott Lahteine
5788a393c0 Fix up microsteps conditionals 2018-06-28 00:07:03 -05:00
Scott Lahteine
5e03dede18 Eliminate stepper.* signed/unsigned warnings 2018-06-27 23:06:49 -05:00
Scott Lahteine
b880028334
Fix stepper/planner block handling, race conditions (#11136) 
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-27 18:11:23 -05:00
Scott Lahteine
cff2201629
Poll all endstops, even when stationary (#11125) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-27 04:19:05 -04:00
Scott Lahteine
e352c1e52d Endstop patch followup 2018-06-27 00:12:42 -05:00
Scott Lahteine
04fc715c91
Add minimum step dir delay option, A4988 pulse note (#11122) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-26 22:28:46 -04:00
Scott Lahteine
4d5c655f8d
Make max_e_jerk an array to save CPU (#11121) 
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
 2018-06-26 22:09:38 -04:00
Giuliano
0a2d3ecfd4 [1.1.x] Fix advanced pause init values (#11096) 
Fixed for cycle used to initialize default values
 2018-06-26 14:38:08 -04:00
Scott Lahteine
8600cbb01b Clear Max7219 without test pattern 2018-06-25 11:54:14 -04:00
Scott Lahteine
dd9c65d0be
[1.1.x] Fix stepper/planner race condition, Stepper pulse timer (#11084) 
* Fix planner/stepper race condition

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
Co-Authored-By: AnHardt <github@kitelab.de>

* Fix stepper pulse timing

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-22 10:53:46 -04:00
Scott Lahteine
53745446f9 Fix LIN_ADVANCE max_e_jerk_factor 
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
 2018-06-21 21:38:52 -04:00
Scott Lahteine
52f5efb78d
Filter endstops state at all times (#11076) 2018-06-21 20:13:16 -05:00
Scott Lahteine
94787114f1
Merge pull request #11074 from thinkyhead/bf1_value_editing 2018-06-21 20:12:48 -05:00
Roxy-3D
7632df6820
add the move_z_after_probing() functionality to UBL's G29 J 2018-06-21 13:22:40 -05:00
Scott Lahteine
bd10791b6d Edit Z fade as whole numbers 2018-06-21 11:53:29 -04:00
Scott Lahteine
b05fcad7fe Fix value editing with callback 2018-06-21 11:48:27 -04:00
Scott Lahteine
3bb332b440 Use Tool 0 for Dual X Axis G29 
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
 2018-06-19 22:54:30 -05:00
Scott Lahteine
e0b4abd3eb Don't reset stepper timeout for all g-codes 2018-06-19 21:50:09 -05:00
Roxy-3D
3ca4f09680 Tiny improvement to M7219 
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
 2018-06-19 18:21:19 -05:00
Giuliano
7cdaf69ab7 [1.1.x] Fix Italian msg len (#11057) 
Fix message to long for 12864 display
 2018-06-18 22:04:35 -05:00
Scott Lahteine
dc087b1132
[1.1.x] Tweaks and additions for MAX7219 (#11033) 2018-06-18 22:03:53 -05:00
Scott Lahteine
35023b09ef Fix critical section start/end 2018-06-16 17:38:46 -05:00
Scott Lahteine
a85f60adb9 Unsigned eeprom mesh addresses 2018-06-15 15:54:42 -05:00
Giuliano
e601cfb836 [1.1.x] reset bltouch on home (#11010) 2018-06-13 14:08:47 -05:00
Scott Lahteine
af1721b351 Extra insurance against endstop false positives 2018-06-13 00:36:47 -05:00
Scott Lahteine
cc4e515480 Fix coolstep_min_speed / sensorless homing 
Fix #8890
 2018-06-12 22:53:17 -05:00
Scott Lahteine
9d91ea4e3e Fix stepper pulse duration 2018-06-12 21:35:03 -05:00
Scott Lahteine
d3567592d7 Localize stepper-specific defines 2018-06-12 21:22:13 -05:00
Scott Lahteine
87eddf35e2 HAL_STEPPER_TIMER_RATE => STEPPER_TIMER_RATE 2018-06-12 16:55:57 -05:00
Scott Lahteine
1d048f5192 Optional homing/leveling with O parameter 
Based on #10913

Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-06-11 23:13:18 -05:00
Scott Lahteine
8073f23672 Improvements for junction_deviation_mm 
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
 2018-06-11 21:49:26 -05:00
Scott Lahteine
4bc5e9341e Use bit flags for homed/known 2018-06-11 21:49:26 -05:00
Scott Lahteine
4ed92f838f Use stepper timer to count pulse duration 2018-06-11 21:46:31 -05:00
Scott Lahteine
47f7c4889d Fix include in lite status screen 2018-06-11 21:30:49 -05:00
Scott Lahteine
6a7e0a852b Minor stepper.cpp cleanup 2018-06-11 19:16:31 -05:00
Scott Lahteine
eca91a8bd7 Tweak M122 report spacing 2018-06-10 20:34:18 -05:00
Scott Lahteine
8e987023e1 Replace ADC with HAL_READ_ADC 2018-06-10 20:09:44 -05:00
Scott Lahteine
53730be606
Fix MarlinSerial (#10992) 2018-06-10 20:04:52 -05:00
Scott Lahteine
38f73d57bc Clean trailing whitespace 2018-06-10 18:42:39 -05:00
Scott Lahteine
7175da3256 Multiplier edit large ranges 2018-06-10 18:18:22 -05:00
Scott Lahteine
4c3504c43f Limit Junction Deviation (0.01 to 0.3) 2018-06-10 18:18:22 -05:00
Scott Lahteine
327b9c389d
Add Junction Deviation mm runtime setting (#10989) 2018-06-10 18:02:40 -05:00
Scott Lahteine
f1ed08e369 Fix serial debug ouput 2018-06-10 17:55:56 -05:00
Scott Lahteine
8dac040c42 Protected pin err for M226 2018-06-10 17:40:00 -05:00
Scott Lahteine
d70189abf6 Always stow BLTOUCH at start of G28 2018-06-10 16:24:12 -05:00
Scott Lahteine
6e49901104 Adaptive and max stepping followup 2018-06-10 16:00:38 -05:00
Scott Lahteine
e0aec001f3
Merge pull request #10984 from thinkyhead/bf1_multiaxis_smoothing 
[1.1.x] Adaptive multi-axis step smoothing
 2018-06-10 15:12:54 -05:00
Scott Lahteine
e9c8c5dbc9
Merge pull request #10982 from thinkyhead/bf1_xon_xoff_changes 
[1.1.x] Serial handshaking fixes / debug
 2018-06-10 04:33:23 -05:00
Scott Lahteine
9c083d8a9f Add sanity-check for MOTHERBOARD 2018-06-10 04:01:59 -05:00
Scott Lahteine
b7ddfddf51 Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
1cdcc6adfa Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
aab9cb0bbe Update MINIMUM_STEPPER_PULSE description 2018-06-10 00:14:39 -05:00
Scott Lahteine
095cc75838 Add hidden Serial debug options 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-09 22:23:10 -05:00
Scott Lahteine
17a965de17 Fix serial XON/XOFF handshaking 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-09 22:23:10 -05:00
Scott Lahteine
63af814d4d Add HAL_timer_start to HAL.h 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-09 22:12:52 -05:00
Giuliano
1b1e15623a [1.1.x] Fix null check in lsDive (#10979) 2018-06-09 22:03:57 -05:00
Scott Lahteine
1132ec34c1 Increase BLOCK_DELAY_FOR_1ST_MOVE to 100 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-09 21:13:55 -05:00
Scott Lahteine
4c4fd9f32f Highlight 64128N and common ST7565 difference 
Followup to #10919, addressing #10962
 2018-06-09 15:08:46 -05:00
Scott Lahteine
60cd6892e2 Prevent MB false-positive on bad board name 2018-06-08 19:57:31 -05:00
Scott Lahteine
1dd4e63402 MarlinSerial.cpp formatting tweak 2018-06-08 19:53:39 -05:00
João Brázio
7aa7ecbd0e Update BQ Hephestos 2 config, NTC-70 table (#10902) 2018-06-07 21:23:43 -05:00
Scott Lahteine
582845fd72
Allow FAN_PIN override, pins cleanup (#10957) 2018-06-07 16:39:11 -05:00
Scott Lahteine
70d39ac185 Fix M503 ABL mesh report. (Zero-based IJ indices) 2018-06-07 16:25:35 -05:00
Scott Lahteine
cd73e8f825 More concise M503 output for M906, M913, M914 2018-06-06 03:12:35 -05:00
Scott Lahteine
827ba94e16 Fix a compile warning 2018-06-05 22:46:45 -05:00
Scott Lahteine
851149954a Tweak sanity formatting 2018-06-05 22:45:07 -05:00
Alex
3bc392f592 Prevent a buffer overflow in cardreader 2018-06-05 22:14:51 -05:00
Scott Lahteine
7d39bcfcce LED menu item bool (like Case Lights) 2018-06-03 00:32:13 -05:00
Scott Lahteine
9641bae325 Cleanup for dual endstops homing 2018-06-03 00:32:13 -05:00
Scott Lahteine
d32beafd21 Add macros for ST7565 commands 2018-06-02 20:31:26 -05:00
Scott Lahteine
3b06a8e917
[1.1.x] Assorted fixes and improvements (#10914) 
Co-Authored-By: ejtagle
 2018-06-01 19:00:59 -05:00
Scott Lahteine
08090d10b6 Drop JUNCTION_ACCELERATION from example configs 2018-05-31 20:06:37 -05:00
Sebastianv650
568b19e7d4 Fix/Improve junction deviation 
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
 2018-05-31 20:06:37 -05:00
Scott Lahteine
c010b1f43f Clean up some trailing spaces 2018-05-31 19:37:22 -05:00
Scott Lahteine
2b49f8ee65 Fix the Z un-hop on G11 
Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>
 2018-05-29 23:40:16 -05:00
Scott Lahteine
9c8594c2fb For SCARA probe Y offset is proximal/distal 2018-05-29 21:44:13 -05:00
Scott Lahteine
a11717eed6 Improve probe logging 2018-05-29 21:44:13 -05:00
Scott Lahteine
43a55a9af4 Update Fan 2 and E0 Auto Fan pins for Trigorilla 2018-05-29 12:24:37 -05:00
Scott Lahteine
0460406154 Fix M914 value range (-64...+63) 
Fix #10896
 2018-05-29 12:03:01 -05:00
Scott Lahteine
7445f30cbf Set deltas to park on the left 2018-05-29 11:45:17 -05:00
Scott Lahteine
6f07699ed5 HOTENDS for Switching Extruder with Switching Nozzle 2018-05-29 11:09:29 -05:00
Scott Lahteine
d6cd7d924c
Modify E-stepping macros for use in LINEAR_ADVANCE (#10887) 2018-05-28 19:33:54 -05:00
Scott Lahteine
2c4d8761ec More concise commentary in planner.cpp 2018-05-28 19:27:55 -05:00
Scott Lahteine
dfe90d552d Long temperature tables need special consideration 2018-05-28 06:27:10 -05:00
Scott Lahteine
c45bfc1c21
Faster (bisect) search in thermistor tables (#10882) 2018-05-27 23:27:34 -05:00
Scott Lahteine
fbeea12026 Correct HOTENDS for SWITCHING_EXTRUDER 2018-05-27 22:55:57 -05:00
Scott Lahteine
33b7488f68 Update stepper.cpp Bresenham for 2.0.x parity 2018-05-27 21:44:01 -05:00
Scott Lahteine
14f45448cb Fix switching extruder stepping with LA 2018-05-26 19:05:31 -05:00
Scott Lahteine
a7561df3d7 Tweak configuration spacing 2018-05-26 18:31:57 -05:00
Scott Lahteine
0bfb10ffb6 Rename Junction Deviation options 2018-05-26 18:31:57 -05:00
Scott Lahteine
949ee7afe9 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:31:57 -05:00
Scott Lahteine
9186123676
Fix manual moves for switching tools (#10867) 2018-05-26 18:30:29 -05:00
Scott Lahteine
1615542ac3
Fix up stepper ISR with linear advance timing (#10854) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-26 01:00:02 -05:00
Sebastianv650
815c4e7b3f Add missing config line for JUNCTION_DEVIATION (#10855) 2018-05-26 00:57:00 -05:00
Eduardo José Tagle
63f7add00c [1.1.x] Buffer overflow and scroll fix, UTF8 cleanup (#10851) 2018-05-25 23:31:19 -05:00
Scott Lahteine
069bd19aec Fix warning with FASTER_GCODE_PARSER disabled 2018-05-25 06:46:28 -05:00
Scott Lahteine
d1235033b2 Make sure FAN_ANIM_FRAMES is defined 2018-05-25 05:25:42 -05:00
Scott Lahteine
b20d7129ab Fix reset of endstops and move state 2018-05-24 19:32:58 -05:00
Scott Lahteine
995702c924 Minor optimization of axis_did_move bits 2018-05-24 19:08:46 -05:00
Scott Lahteine
62d923a053 Fix K8400 Y min pos, M118 comment 2018-05-24 08:19:30 -05:00
Scott Lahteine
181516f7cb Fix Malyan LCD, allow no SD Card 2018-05-24 06:14:32 -05:00
Scott Lahteine
27c5ede796 Add USE_MARLINSERIAL conditional 2018-05-24 05:51:14 -05:00
Scott Lahteine
ebb839971d Conditionals match 2.0.x indentation 2018-05-24 05:51:14 -05:00
Scott Lahteine
aa8fd920a4 Followup for core endstops 2018-05-24 03:01:24 -05:00
Scott Lahteine
ac293bdf95
Clean up and consolidate SD-related code (#10832) 2018-05-24 01:19:12 -05:00
Scott Lahteine
766bcc6a70 Patches for core motion tests 2018-05-24 00:50:25 -05:00
Scott Lahteine
912fff0923 Drop #pragmas that don't help .c files 2018-05-23 23:44:53 -05:00
Scott Lahteine
773a550472 Fix fade value for power-loss recovery 
Fix #10817

Co-Authored-By: cdedwards <cd.edwards@sasktel.net>
 2018-05-23 16:55:14 -05:00
Scott Lahteine
76019c83b5 Default G30 to engage / disengage 2018-05-23 16:55:14 -05:00
Scott Lahteine
58a6eb656c
Fix Endstops Core compatibility (#10822) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-23 03:45:12 -05:00
Scott Lahteine
25b3511241 Suppress U8glib warnings on build 2018-05-23 02:26:18 -05:00
Scott Lahteine
0a0f2a5857 Followup to LCD button tweak 2018-05-22 19:51:05 -05:00
Scott Lahteine
c76a466ba9
Followup to endstops update 2018-05-22 14:52:24 -05:00
Scott Lahteine
01083dfca1 Restore lost Endstops::monitor 2018-05-22 01:58:20 -05:00
Scott Lahteine
07c35886e1 Tweak G38 formatting 2018-05-22 01:56:45 -05:00
Ante Vukorepa
4e67660c0f [1.1.x] Fix G1 behaviour after tool unpark (#10777) 2018-05-22 00:51:13 -05:00
Scott Lahteine
f552557b0c Fix DEBUG_LEVELING_FEATURE with MBL 2018-05-22 00:48:14 -05:00
Scott Lahteine
083726b2ae Group button-related LCD code 2018-05-22 00:48:14 -05:00
Scott Lahteine
cb6e58559c Cleanup in stepper_indirection.h 2018-05-22 00:32:17 -05:00
Scott Lahteine
a971cacb06 Add Endstop Noise Filter 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-21 15:32:26 -05:00
Scott Lahteine
e63113e6ad Add ENDSTOP_NOISE_FILTER to example configs 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-21 15:29:14 -05:00
Scott Lahteine
e0ae9b8548 Stepper::set_position needed for some applications 2018-05-21 15:23:00 -05:00
Scott Lahteine
3a4a229721 Fix interrupt-based endstop detection 2018-05-20 21:24:57 -05:00
Scott Lahteine
d2f8971045 Fix planner block optimization 2018-05-20 21:24:57 -05:00
Scott Lahteine
a4f2f2fe54 Planner block HOLD flag 2018-05-20 21:24:57 -05:00
Scott Lahteine
8f26c3a6d3 Refactor and optimize Stepper/Planner 2018-05-20 21:24:57 -05:00
Scott Lahteine
38e1823375 Add HAL.h for AVR for easier 2.0.x parity 2018-05-20 21:24:57 -05:00
Scott Lahteine
ddc1a48844 Adjust formatting in stepper.cpp 2018-05-20 12:37:01 -05:00
Scott Lahteine
bf61be8ede Simplify and fix z fade height editing 
Fix #10761
 2018-05-20 12:32:45 -05:00
Scott Lahteine
ad49088173 Fix enter key spasm 2018-05-20 07:50:07 -05:00
Bob Kuhn
c5c5506415 autobuild update & fix platformio.ini (#10791) 2018-05-20 07:30:36 -05:00
Scott Lahteine
8fd00ff0fb Fix LIN_ADVANCE + SWITCHING_EXTRUDER 
Followup to #10657
 2018-05-19 20:59:02 -05:00
Scott Lahteine
4e3793988a Ensure pulse delay in babystepping 
Proposed alternative to #10778
 2018-05-19 20:59:01 -05:00
Scott Lahteine
6f10d637ad Fix some compile warnings 2018-05-19 17:09:24 -05:00
Scott Lahteine
af3a68f81f Add HAS_HOTEND_OFFSET_Z conditional 2018-05-19 17:09:24 -05:00
Scott Lahteine
a847ea625e Don't define unused move_extruder_servo 
For parity with #10772
 2018-05-19 17:09:24 -05:00
Giuliano
b360bb9ff9 [1.1.x] Temperature reading fix (#10775) 
#10774 counterpart
 2018-05-19 15:38:41 -05:00
Scott Lahteine
9d36dfceda Add FAN_MAX_PWM to example configs 2018-05-15 21:17:34 -05:00
Scott Lahteine
151201656f Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:17:34 -05:00
Scott Lahteine
2ce8047adb Head off potential LCD-related compile issues 2018-05-15 00:07:31 -05:00
Scott Lahteine
99f7d3853b
Modify UBL mesh_is_valid and use in leveling_is_valid (#10747) 2018-05-14 22:35:45 -05:00
Scott Lahteine
29080cefd9 Consistent heating status and status reset 
Fix #10699
 2018-05-13 17:23:26 -05:00
Scott Lahteine
b7706ca8d0 Followup to _AXIS patch 2018-05-13 10:42:00 -05:00
Scott Lahteine
7c6dd087c9 Convert maths macros to inlines 
For parity with #10728

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 10:36:37 -05:00
Scott Lahteine
431a81fc66 Don't go to babystep on long press unless printing 
As pointed out in #10731
 2018-05-13 08:14:57 -05:00
Scott Lahteine
3505d018db Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:51:33 -05:00
Scott Lahteine
bf0fcebfe6 Apply _AXIS macro 2018-05-13 04:51:32 -05:00
Scott Lahteine
03e8f6c1d9 Tweaks to heater / lcd conditions 2018-05-13 04:51:32 -05:00
Scott Lahteine
ea353c3df6
Move some Stepper methods to Planner (#10719) 2018-05-12 09:29:17 -05:00
Scott Lahteine
8c81e6341a Fix some compiler warnings 2018-05-12 07:54:14 -05:00
Scott Lahteine
039302bf4c
Better handling of DELAY_NS and DELAY_US (#10717) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 04:22:55 -05:00
Scott Lahteine
0aa791d62b Fix Switching Extruder with Linear Advance 2018-05-12 02:27:40 -05:00
Scott Lahteine
aff683c3f5
Move lpq_len to Temperature class (#10715) 2018-05-12 02:13:54 -05:00
Giuliano
02a79cc030 [1.1.x] EEPROM code cleanup (#10711) 2018-05-11 18:06:36 -05:00
ManuelMcLure
ef9617fe44 [1.1.x] Use M_PI instead of PI (#10702) 2018-05-11 17:57:16 -05:00
ManuelMcLure
b7899610ac Use arc moves for G26 if enabled (#10695) 2018-05-11 01:53:15 -05:00
Scott Lahteine
e5f4f1554b
[1.1.x] Enable AD595 and AD8495 in concert (#10694) 
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
 2018-05-11 01:02:00 -05:00
ManuelMcLure
bbd584bc14 Remove hidden dependency from plan_arc() and plan_cubic_move() (#10690) 2018-05-11 00:34:33 -05:00
Scott Lahteine
0b8af93d1e
Patch up reverse_pass_kernel (and other planner code) (#10673) 2018-05-10 01:30:39 -05:00
Scott Lahteine
61ae84b53e
Correction to Printrboard SDSS pin (#10676) 
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
 2018-05-10 01:28:44 -05:00
Kyle Spier-Swenson
a04fc8c318 [1.1.x] Blink the value on non-homed axes (#10523) 2018-05-10 01:19:11 -05:00
Scott Lahteine
c3a891f790 Trailing whitespace cleanup 2018-05-10 00:15:32 -05:00
Scott Lahteine
42de5b0310 More Trinamic cleanup 2018-05-10 00:10:08 -05:00
Scott Lahteine
8e818ade5e Drop extra RIGIDBOT_PANEL from D6 config 2018-05-09 18:03:31 -05:00
Scott Lahteine
2c01e9c6a7
Support all axes in M911 and M912 (#10669) 
Co-Authored-By: Giuliano <gmagician@users.noreply.github.com>
 2018-05-09 17:58:25 -05:00
Scott Lahteine
98bb97b515
Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10657) 2018-05-09 14:36:27 -05:00
Scott Lahteine
b9e4ce3715 Fix compilation with UBL and Arc/Bézier 
Fix #10660
 2018-05-09 00:41:51 -05:00
Scott Lahteine
78410b210b
Add UBL support for G2/G3 and G5 (#10649) 2018-05-08 11:10:33 -05:00
Scott Lahteine
de0b872a24
Merge pull request #10652 from thinkyhead/bf1_bezier_jerk_control_avr 
[1.1.x] Bézier Jerk Control
 2018-05-08 11:09:19 -05:00
Scott Lahteine
ae24f4f930
Merge pull request #10650 from thinkyhead/bf1_junction_deviation 
[1.1.x] Junction Deviation
 2018-05-08 09:25:21 -05:00
Scott Lahteine
f093ce35a0 Add BEZIER_JERK_CONTROL to example configs 2018-05-08 09:21:54 -05:00
Scott Lahteine
7ee1ab4fd3 Add Bézier Jerk Control option 2018-05-08 09:21:54 -05:00
Scott Lahteine
bb352f9836
Add a 3-frame fan animation to bitmaps (#10653) 2018-05-08 08:18:51 -05:00
Scott Lahteine
5c120222a4 Show correct units in M503 2018-05-08 05:47:09 -05:00
Scott Lahteine
b3af5a1ac0 Add JUNCTION_DEVIATION to example configs 2018-05-08 04:43:51 -05:00
Scott Lahteine
124cff0dbe Junction deviation jerk limiting option 2018-05-08 04:43:51 -05:00
Scott Lahteine
9076a9314f Fix abort of SD printing 2018-05-07 00:18:53 -05:00
Scott Lahteine
40ce9d0299 Fix some sanity checks 
Co-Authored-By: Giuliano <gmagician@users.noreply.github.com>
 2018-05-06 23:22:28 -05:00
Scott Lahteine
20f1688376 Try whole word over abbrev. for error 2018-05-06 20:50:12 -05:00
Scott Lahteine
59e8707a4f Remove some unused vars 2018-05-06 20:49:08 -05:00
Scott Lahteine
5735c8af5b
[1.1.x] Arrange LCD options by type (#10631) 
* Bump configuration versions to 010109
* Arrange LCD options by type
 2018-05-06 19:17:29 -05:00
Scott Lahteine
c97bf04166 Geeetech follow-up 2018-05-06 08:14:00 -05:00
Scott Lahteine
156bd28160 Fully init planner sync_block 2018-05-06 08:14:00 -05:00
Scott Lahteine
1f991f07be
Merge pull request #10615 from thinkyhead/bf1_synced_planner_set_position 
[1.1.x] Improve sync of planner / stepper position, asynchronous G92
 2018-05-06 03:10:28 -05:00
Scott Lahteine
675be8db7c Bring some example configs up to date 2018-05-06 03:06:13 -05:00
Scott Lahteine
fcb19823db Add Geeetech i3 Pro C / W examples 
Added base example configs for Geeetech's Pro C and Pro W machines.

Co-Authored-By: Phr3d13 <phr3d13@gmail.com>
 2018-05-06 01:37:41 -05:00
Scott Lahteine
e8779e7fe2 Fix up fwretract handling 2018-05-06 01:22:30 -05:00
Scott Lahteine
ac5ff1d802 Adjust usage of stepper.synchronize 2018-05-06 01:22:30 -05:00
Scott Lahteine
08e20dbbc6 Improve sync of stepper positions 2018-05-06 01:22:30 -05:00
Scott Lahteine
1682036533 Apply int32_t to stepper 2018-05-05 18:22:46 -05:00
Roxy-3D
42180e25a3
change Max7219 coordinates are in traditional (X,Y) format 2018-05-05 16:07:20 -05:00
Scott Lahteine
c6e4fbe162 Additional patch for no heated bed 2018-05-04 00:11:19 -05:00
Bob-the-Kuhn
65adea6240 remove TMC version checks, move comment 2018-05-03 15:47:35 -05:00
Scott Lahteine
888da29b61 Enforce minimum TMC2130 / TMC2208 libs 2018-05-03 15:47:35 -05:00
TheMasterFX
50ff4cf157 Fix bed size and max z pos for Ender-2 (#10603) 2018-05-02 19:02:15 -05:00
Scott Lahteine
b50afa9897 Add thermocouple with AD8495 support 
Co-Authored-By: Dmitriy <demonx@demonx.ru>
 2018-05-02 08:41:31 -05:00
Scott Lahteine
a556a8c506 Temp-related and conditional improvements 2018-05-02 08:41:30 -05:00
TerraBAS
ee7b6a5e68 [1.1.x] Add Velleman RGB-LED Add-on support to K8400 configs (#10594) 2018-05-02 08:00:01 -05:00
Scott Lahteine
da9f3868d5
Merge pull request #10587 from thinkyhead/bf1_lcd_bed_leveling_abl 
[1.1.x] Sub-menu for ABL with LCD_BED_LEVELING
 2018-05-01 06:49:32 -05:00
Scott Lahteine
04183da302
Add Ender-3 configs (#10588) 
Co-Authored-By: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
 2018-05-01 06:20:35 -05:00
Scott Lahteine
0b9f99f940 LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 04:41:56 -05:00
Scott Lahteine
5aff43e65e Rename float32 => float52, etc. 2018-05-01 04:41:56 -05:00
Scott Lahteine
32b6a3ad12 Fewer includes of vector_3.h 2018-05-01 04:41:56 -05:00
Scott Lahteine
94857b59c9 General lcd code cleanup 2018-05-01 01:22:25 -05:00
Scott Lahteine
3c5f0ce858 Clean up autostart handling 2018-05-01 01:22:25 -05:00
Scott Lahteine
0d7c559139 Improve debug of homing move feedrate 2018-04-30 23:45:35 -05:00
Scott Lahteine
542baea2e1 Add units to probe speed comments 2018-04-30 23:45:34 -05:00
Scott Lahteine
33ddd4e929 Fix XY homing move away rate 2018-04-30 23:45:34 -05:00
Scott Lahteine
96c1721eeb Fix sd_status comparison 
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
 2018-04-30 21:10:25 -05:00
Scott Lahteine
f71e65aa9c Add NO_LCD_MENUS to custom configs 2018-04-30 18:39:32 -05:00
Scott Lahteine
1025066ab1 Add NO_LCD_MENUS to display only the Status Screen 2018-04-30 18:39:32 -05:00
Scott Lahteine
f4a7531ccb Fix homing with probe feedrates 2018-04-30 16:36:06 -05:00
Scott Lahteine
3e53754ccf Allow Z_AFTER_PROBING to be 0 2018-04-30 03:08:49 -05:00
Scott Lahteine
99cbeb3806 Do rounding in integer (instead of FIXFLOAT) 
Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>
 2018-04-29 19:34:16 -05:00
Scott Lahteine
751de314a4 Add sanity check for LED_CONTROL_MENU 
Addressing #10569
 2018-04-29 18:37:00 -05:00
Scott Lahteine
689ae467f2
Round all floats in string conversion functions (#10565) 2018-04-28 21:51:27 -05:00
Scott Lahteine
b06fc3b539 Modify FastIO error message 2018-04-28 20:28:40 -05:00
Scott Lahteine
3ca3268241 Fix the TMC26X initializer CS pin argument 
From #10531

Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>
 2018-04-28 12:00:23 -05:00
Bob-the-Kuhn
382aa96870 1.1.x version of Auto-build PR 10503 (#10561) 2018-04-28 11:30:40 -05:00
Scott Lahteine
522ea178a4 Clear up trailing whitespace 2018-04-28 11:25:19 -05:00
Scott Lahteine
2756a1d411 Fix M421 comment in Marlin_main.cpp 2018-04-28 11:15:48 -05:00
Scott Lahteine
94b8eac6d0 Allow a home bump of 0 when homing Z with probe 2018-04-28 10:25:50 -05:00
Scott Lahteine
b4ddee8beb When homing with Z probe bump at Z_PROBE_SPEED_SLOW 2018-04-28 08:48:49 -05:00
Scott Lahteine
f0494b4021 Fix M420 C for UBL 2018-04-28 08:17:55 -05:00
Scott Lahteine
ba8d03d241 Clean up some endstop inverting examples 2018-04-28 08:00:44 -05:00
Scott Lahteine
37927f9274 Fix some endstop inverting settings 2018-04-28 08:00:15 -05:00
Scott Lahteine
81b9914704 Further cleanup of inline delays 2018-04-27 19:25:14 -05:00
Giuliano
d86efae37c [1.1.x] report error on unsupported commands (#10554) 
Raise an error when an unknown/unsupported G/M command is requires.
 2018-04-27 17:40:32 -05:00
per1234
3550494db1 Correct AVR_ATmega328_FAMILY macro (#10540) 2018-04-27 03:11:56 -05:00
Scott Lahteine
95d19cfcbf Fix disable of Z_SENSORLESS for HOMING_Z_WITH_PROBE 
As pointed out in #10532
 2018-04-27 01:40:25 -05:00
Scott Lahteine
e5e5c1513d Fix ABL grid bounds test for Delta/SCARA 2018-04-27 00:55:29 -05:00
Scott Lahteine
083bfa3fe9 Remove refs to non-existent CPU_32_BIT 2018-04-27 00:55:29 -05:00
Scott Lahteine
8f5d99a2ab Wrap delay macros in do{}while(0) 2018-04-27 00:34:40 -05:00
Scott Lahteine
f748b1a1ce Apply const in a few spots 2018-04-26 17:56:23 -05:00
Scott Lahteine
e931bc7e72 Reorder some conditionals 2018-04-26 17:55:36 -05:00
Roxy-3D
b95a1b94cb
make Max7219 usable at ISR time 2018-04-26 14:32:24 -05:00
Scott Lahteine
cb02b6ec60 Disable PIDTEMPBED with no bed… 
…and move FILAMENT_CHANGE_SLOW_LOAD_LENGTH default to post-conditionals.
 2018-04-26 01:34:06 -05:00
Scott Lahteine
d70a4646f4 MKS OLED support for RUMBA 
Based on #10519

Co-Authored-By: Alex <alex18881@users.noreply.github.com>
 2018-04-25 22:57:34 -05:00
Scott Lahteine
11bbcfd69e
Update emergency_parser for 2.0.x parity (#10530) 2018-04-25 22:42:43 -05:00
Scott Lahteine
d429d5a4ae
Add M420 C to center the mesh on a value (#10521) 2018-04-25 06:43:59 -05:00
Scott Lahteine
21f5ca6ad4 Revert potentially-not-redundant UBL test 
Response to #10435
 2018-04-24 08:05:23 -05:00
Scott Lahteine
ad3b95c8ea Fix current_temperature_chamber compile error 
Fix #10505
 2018-04-24 07:53:45 -05:00
Scott Lahteine
50cc55d172 FastIO faster atomic bit write, fix TOGGLE 
Based on #10502

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-04-24 04:13:50 -05:00
Scott Lahteine
3eb55016e4 Finish AVR preemptive interrupt 
Followup to #10501
 2018-04-23 22:20:00 -05:00
Scott Lahteine
51004e003d
Proper AVR preemptive interrupt handling (#10501) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-04-23 20:47:31 -05:00