MarlinFirmware

mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-16 07:21:47 +00:00

Author	SHA1	Message	Date
João Brázio	b05a75655a	Implements a nozzle cleaning pattern generator (G12)	2016-07-13 21:14:19 +01:00
Scott Lahteine	a8b6b6a128	Merge pull request #4252 from thinkyhead/rc_rename_hpb Replace PLA/ABS preheating with generic	2016-07-12 20:00:33 -07:00
Scott Lahteine	928ff6487a	Greek language pack from @psavva	2016-07-10 18:59:04 -07:00
Scott Lahteine	182c8d7f8f	Dyze High Temp Thermistor Support	2016-07-10 17:59:05 -07:00
Scott Lahteine	1026e5b071	Replace PLA/ABS preheating with generic	2016-07-09 18:06:51 -07:00
Petr Zahradnik	e282d69f63	Print job timer comment changed	2016-07-09 17:57:54 -07:00
Scott Lahteine	683975cf90	Fix spelling in a config comment	2016-06-28 16:49:13 -07:00
Scott Lahteine	10da7ac86c	Combine Z raise before/after options	2016-06-26 13:56:30 -07:00
Scott Lahteine	03c70c1990	SERVO_DEACTIVATION_DELAY => SERVO_DELAY	2016-06-23 14:33:29 -07:00
Scott Lahteine	bd01592816	Goodbye MECHANICAL_PROBE	2016-06-22 17:13:33 -07:00
Scott Lahteine	b590a7dee0	Make Z_RAISE_BETWEEN_PROBINGS a more general option	2016-06-22 14:00:44 -07:00
Scott Lahteine	d50539583a	Make XY_PROBE_SPEED a general probe option	2016-06-22 03:04:47 -07:00
Scott Lahteine	2798499b71	XY_TRAVEL_SPEED => XY_PROBE_SPEED	2016-06-22 02:45:25 -07:00
esenapaj	d583ea852d	Standardize format description of Panel	2016-06-21 20:51:27 +09:00
Scott Lahteine	3996242e9d	Allow Z_MIN_PROBE_REPEATABILITY_TEST solo	2016-06-21 01:56:40 -07:00
Scott Lahteine	9beb3f2f5e	Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup FIL_RUNOUT_INVERTING false by default	2016-06-19 19:46:14 -07:00
Scott Lahteine	f215b30932	Merge pull request #4093 from thinkyhead/rc_probe_without_abl Make Z Probe options independent of ABL	2016-06-19 19:44:25 -07:00
Scott Lahteine	dfbf8b3c2c	FIL_RUNOUT_INVERTING false by default	2016-06-19 19:25:26 -07:00
Scott Lahteine	de12228758	Make Z Probe options independent of ABL	2016-06-19 18:47:27 -07:00
Scott Lahteine	f8c278ce4d	Cartesio UI display option in all configs	2016-06-19 17:39:46 -07:00
Scott Lahteine	bd4ec727e7	Merge pull request #4066 from thinkyhead/rc_M851_with_probe Make M851 standard with a bed probe	2016-06-17 17:32:55 -07:00
Scott Lahteine	fc56a547d1	Rename movement section to motion	2016-06-17 15:19:43 -07:00
Scott Lahteine	1000563d80	Make M851 standard with a bed probe	2016-06-17 15:19:42 -07:00
Scott Lahteine	47ce810f52	Remove support for XY servo endstops	2016-06-17 14:19:17 -07:00
Scott Lahteine	02e5dad29a	Include Croatian in language listings	2016-06-16 16:18:26 -07:00
João Brázio	8ccd97e7cc	Updated all example configuration files	2016-06-12 00:36:15 +01:00
João Brázio	de8108648f	Added a versioning system to the config files	2016-06-11 23:48:10 +01:00
Reid Rankin	16212432c9	G20/21 and M149 support, and code_value() refactor This is an update of MarlinDev PR #196. G20/21: support for switching input units between millimeters and inches. M149: support for changing input temperature units. In support of these changes, code_value() and code_value_short() are replaced with an array of functions which handle converting to the proper types and/or units.	2016-06-08 16:51:10 -07:00
Scott Lahteine	cd441ce652	SINGLENOZZLE: EXTRUDERS versus HOTENDS	2016-06-03 17:38:03 -07:00
Scott Lahteine	db0fd021d0	Z raise options independent of ABL so G28 can use them	2016-06-02 16:56:49 -07:00
Scott Lahteine	28fb1f8994	Tweak #endif comment for ABL GRID	2016-06-02 16:56:49 -07:00
Scott Lahteine	a0b000d752	Support for SAV_3DGLCD OLED LCD controller	2016-05-31 14:41:16 -07:00
Edward Patel	eb2746a34f	MBL: Fix for negative x/y positions	2016-05-28 21:05:43 +02:00
Scott Lahteine	fe3122774a	Merge pull request #3806 from thinkyhead/rc_coreyz_support Support for COREYZ. Fixes for COREXY, COREXZ	2016-05-26 18:50:43 -07:00
Scott Lahteine	89e630b2fb	Merge pull request #3808 from thinkyhead/rc_singlenozzle SINGLENOZZLE	2016-05-23 15:52:19 -07:00
Scott Lahteine	95fee8ca81	Add option for CoreYZ kinematics	2016-05-23 13:58:40 -07:00
Scott Lahteine	c5130fd23b	Additional instructions for controller reverse options	2016-05-20 18:14:50 -07:00
Scott Lahteine	69abfef82e	Add "SINGLENOZZLE" extruder option	2016-05-20 15:45:11 -07:00
Scott Lahteine	37c6d0f4ed	Reword MESH_G28_REST_ORIGIN comment	2016-05-20 11:52:27 -07:00
Edward Patel	c7d90dc5ec	Add option to configure G28 all axis resting position for MBL	2016-05-20 11:52:27 -07:00
João Brázio	f9a62f6a8e	Added PRINTJOB_TIMER_AUTOSTART section to example config files	2016-05-14 15:22:45 -07:00
João Brázio	8a18c52002	Adds an option to disable print job timer auto start	2016-05-14 15:22:44 -07:00
Scott Lahteine	f13c4a9ec4	Merge pull request #3720 from jbrazio/feature/host-keepalive Removes the DISABLE from HOST_KEEPALIVE	2016-05-14 14:39:31 -07:00
Scott Lahteine	14cd0f4c92	Merge pull request #3740 from thinkyhead/rc_lcd_home_options Individual Axis Homing LCD menu items	2016-05-12 11:59:46 -07:00
João Brázio	09150cae79	Individual Axis Homing LCD menu items	2016-05-11 19:28:19 -07:00
Scott Lahteine	4dc4e2063f	Add REVERSE_ENCODER_DIRECTION option	2016-05-11 15:39:28 -07:00
João Brázio	85b2c80838	Updated example configurations	2016-05-11 01:45:49 +01:00
João Brázio	ac7f634956	Removed the DISABLE from HOST_KEEPALIVE_FEATURE option	2016-05-11 01:45:49 +01:00
João Brázio	aa5a4716cf	Update default config	2016-05-10 13:37:21 +01:00
esenapaj	212b17d510	Fix for PR #3526(Configuration.h LCD & SDCard s... Fix for PR #3526(Configuration.h LCD & SDCard section rewrite) It removes duplicated BQ_LCD_SMART_CONTROLLER.	2016-05-03 21:35:02 +09:00
Scott Lahteine	c3ef9993b9	Merge pull request #3625 from jbrazio/feature/print-counter Print job statistics	2016-04-29 15:31:14 -07:00
João Brázio	e34f4653ef	Fixed a typo on the configuration files	2016-04-29 23:13:59 +01:00
João Brázio	e2da7e5000	Updated the default configuration and fixed a printcounter.h typo	2016-04-29 23:13:58 +01:00
Scott Lahteine	924285afa6	Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc Correct the REVERSE_MENU_DIRECTION comment	2016-04-28 20:28:46 -07:00
Scott Lahteine	f1b00eb12b	Correct the REVERSE_MENU_DIRECTION comment	2016-04-28 20:27:17 -07:00
Scott Lahteine	0c11566f42	Replace LANGUAGE_INCLUDE with LCD_LANGUAGE	2016-04-27 20:06:40 -07:00
Scott Lahteine	259794c0be	Make DISPLAY_CHARSET_HD44780 a single setting	2016-04-27 20:06:40 -07:00
João Brázio	170f7e8a45	Rework Marlin's versioning system	2016-04-24 05:21:17 +01:00
Scott Lahteine	0c2aa92b07	Z Safe Homing for all The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so make it available for general use.	2016-04-20 17:04:52 -07:00
Scott Lahteine	ef2fd620e9	Suggested fixups for LCD/SD config comments	2016-04-16 19:35:02 -07:00
João Brázio	7b5d6ba315	Rebase & feedback	2016-04-16 19:35:02 -07:00
João Brázio	36a49eab1c	Improved the LCD and SD comments blocks in Configuration.h	2016-04-16 19:32:41 -07:00
Scott Lahteine	a8e4d7c135	Merge pull request #3477 from alephobjects/BedTempHysteresis Implementation of M190 bed temp hysteresis	2016-04-15 16:20:58 -07:00
Scott Lahteine	1cc622b167	Fix minor spelling in comments	2016-04-14 20:06:59 -07:00
Scott Lahteine	de8c0baf8b	Update some comments in Configuration.h	2016-04-14 16:41:20 -07:00
gralco	69c00aea4c	Include bed hysteresis setting in the example configs	2016-04-14 08:03:38 -06:00
Scott Lahteine	f8e10ff1d8	Merge pull request #3491 from thinkyhead/rc_mechanical_probe Support for "mechanical probe" with Allen Key as a special case	2016-04-13 20:55:14 -07:00
Scott Lahteine	7eb476597f	Update some comments in Configuration.h	2016-04-13 20:34:42 -07:00
esenapaj	2eb1b102f8	Support for "mechanical probe" with Allen Key as a special case	2016-04-13 20:34:12 -07:00
gralco	178aeb79c8	Implementation of M190 bed temp hysteresis	2016-04-12 08:56:14 -06:00
Scott Lahteine	2eca8d63b3	Add DEFAULT_KEEPALIVE_INTERVAL setting	2016-04-07 19:25:56 -07:00
Scott Lahteine	e5771346a4	Drop DISABLE_M(IN\|AX)_ENDSTOPS, replace with individual endstop flags	2016-04-02 16:39:23 -07:00
Scott Lahteine	ffe054c129	Fix comment about host keepalive interval	2016-04-01 17:28:08 -07:00
Scott Lahteine	1a79b13b7a	FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR	2016-03-29 20:54:31 -07:00
Scott Lahteine	53cc6cca46	Formalize some dependencies on PIDTEMPBED	2016-03-25 23:50:28 -07:00
Scott Lahteine	4b31c67dce	Add PID_AUTOTUNE_MENU option	2016-03-25 19:31:56 -07:00
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style Following up on #3231	2016-03-25 00:45:56 -07:00
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	2016-03-24 18:01:20 +00:00
Scott Lahteine	da9d4c4caf	Merge pull request #3206 from esenapaj/patch-5 Follow-up the PR #3082, etc	2016-03-24 00:20:25 -07:00
esenapaj	fc75e6f92d	Follow-up the PR #3082 , etc Follow-up the PR #3082 Follow-up the commit `143ad74`: unnoticed updates Fix for commit `b0f5ba0`: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind Standardize the writing method: Z-probe, z-probe -> Z Probe Adjust spacing	2016-03-22 20:22:01 +09:00
esenapaj	22299c13c1	Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit `12d0983757`, but http://www.marlinfirmware.org/ isn't working.	2016-03-22 19:58:41 +09:00
Scott Lahteine	be08eb6153	Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8 Add pt_pt-utf8 language pack and fix some minor compiler warnings	2016-03-20 17:42:45 -07:00
Scott Lahteine	d1ff7959b7	Merge pull request #3188 from esenapaj/patch-1 follow-up the commit `b82d91e`	2016-03-20 17:39:52 -07:00
Scott Lahteine	1cc316f1fd	Merge pull request #3082 from thinkyhead/updated_2820 This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.	2016-03-20 17:10:38 -07:00
jbrazio	92a7d4515a	Missing coma comment correction for the default cofig file	2016-03-20 23:23:11 +00:00
jbrazio	68dda08fff	Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs	2016-03-20 23:14:24 +00:00
esenapaj	468df96b0f	follow-up the commit `b82d91e` follow-up the commit `b82d91eca6`	2016-03-20 20:57:14 +09:00
Scott Lahteine	32f75749e4	Merge pull request #3117 from Blue-Marlin/thermal-protection Improve the descriptions for THERMAL_PROTECTION	2016-03-19 23:41:05 -07:00
Scott Lahteine	4119cef32f	Merge pull request #3180 from clexpert/RCBugFix Czech language specific changes	2016-03-19 20:18:05 -07:00
CoderSquirrel	eda95d8bed	Add support for LCM1602 16x2 I2C LCD adapter	2016-03-19 19:26:44 -07:00
Petr Zahradnik	98392782ea	Update Configuration.h	2016-03-19 20:45:13 +01:00
Blue-Marlin	3166aed087	Improve the descriptions for THERMAL_PROTECTION	2016-03-19 14:08:59 +01:00
AnHardt	3f45a1acf9	Check probes only when deployed Aim: Test probes in update_endstops only when activated Changes: Configurations Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message. Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin Add some comments Shift some entries to have related things together. Conditionals.h We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined. SanityCheck.h Add some tests if the probe is connected and if we have defined a probe. stepper.cpp Changes to test the probe only when it is deployed (z_probe_is_active). Test update_endstops() when the probe is deployed. MarlinMain.cpp a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled() b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions. d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop. To do: In another PR. handle all probes in deploy/stow_z_probe. Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.	2016-03-19 02:00:08 -07:00
Scott Lahteine	7ec7bb31c4	Send a Busy signal to hosts during long processes, wait for input, etc If Marlin is blocking the serial input or command queue for any length of time (for example more than 2 seconds), it needs to send a message to serial out to inform the host that it is busy. Marlin should only send these messages out when busy, and preferably not when trying to print formatted output.	2016-03-18 22:38:35 -07:00
Scott Lahteine	b8b51d8da8	Add the REVERSE_MENU_DIRECTION option	2016-03-16 04:02:40 -07:00
Scott Lahteine	1c384930f3	Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion Wrap macros to prevent bad expansions	2016-03-15 00:25:34 -07:00
Scott Lahteine	30c3a21d1f	Merge pull request #3112 from thinkyhead/rc_support_MAX31855	2016-03-13 03:30:48 -07:00
Scott Lahteine	f9ded2a7c4	Wrap macros to prevent bad expansions	2016-03-12 22:38:55 -08:00
Scott Lahteine	27f244ba2c	Support MAX31855 as Temperature Sensor -3	2016-03-10 02:49:54 -08:00
Scott Lahteine	ce639b8b03	Group FILAMENT_SENSOR options together	2016-03-10 02:41:37 -08:00
AnHardt	fd5414c6ea	Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING rebased corrected spelling changed to #elif for error Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.	2016-03-08 17:50:23 +01:00
Scott Lahteine	cf792fd8d8	Update configurations to use RAMPS 1.4	2016-03-06 05:52:01 -08:00
Scott Lahteine	13ef12ad3f	Fix power calculations As suggested by @max-pau in #3073 - #3074	2016-03-06 05:51:59 -08:00
jbrazio	143ad74db7	Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config files.	2016-03-06 05:51:58 -08:00
jbrazio	b0f5ba0232	Update the PROBE_OFFSET_FROM_EXTRUDE comment section This changes have being discussed at MarlinFirmware/Marlin#2849.	2016-03-06 05:51:57 -08:00
Scott Lahteine	e7cf85b922	Merge pull request #3013 from thinkyhead/esenapaj-patch-1 Enhanced #3010 - formal Mesh/Manual dependency	2016-03-06 00:30:02 -08:00
Scott Lahteine	eb85342fd9	Merge pull request #2989 from AnHardt/fix2661 Pre home display - Stepper release	2016-03-05 21:30:17 -08:00
Scott Lahteine	772460a7b8	Various minor spelling corrections Redo of #2939 rebased against RCBugFix	2016-03-05 20:41:15 -08:00
AnHardt	615bec2329	Activate warning about possible reduced accuracy by default Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING` Changed the condition for blinking from ``` #if ENABLED(WARN_REDUCED_ACCURACY) ``` to ``` #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) ```	2016-02-28 23:20:21 +01:00
AnHardt	5b0f659355	Changes for graphics displays Replaced displaying "---" instead of the value of a coordinate when unhomed or with reduced precision with blinking the coordinate-prefix-character ('X','Y','Z'). For "unhomed" a '?' is shown every second second - until that axis is homed. The value displayed is, as before the "---" where displayed, the relative to the reset position coordinate value. When the axis stepper was disabled, now we can display a hint on that, by showing a blinking ' ' instead of the axis letter, when WARN_REDUCED_ACCURACY is defined. I suppose the code itself is here the better documentation. A '+/-' character is in non of our charsets so i decided for a '?' for now to reduce the work. There is no additional space on the displays one could use to display the information, so replacing something is the only option. As the axis letters are totally redundant with their positions on the display they contain the least information. So my decision was to overwrite them.	2016-02-28 23:19:32 +01:00
AnHardt	b6e69e71ce	Make stepper shutdown after inactivity dependent Make stepper shutdown after inactivity dependent on a new set of #defines. DISABLE_INACTIV_X DISABLE_INACTIV_Y DISABLE_INACTIV_Z DISABLE_INACTIV_E And make exemplaric Configuration. Names can be discussed. This makes the disabling of the steppers independent from the DISABLE_? settings witch shut down the steppers immediately.	2016-02-28 16:58:42 +01:00
Scott Lahteine	c2e5c6c12c	Nest Manual Bed Leveling options This formalizes the dependency of MANUAL_BED_LEVELING on MESH_BED_LEVELING	2016-02-20 20:35:10 -08:00
Scott Lahteine	b19b272172	Update configurations with SPI_SPEED - Include aligned comment about new SDSUPPORT behavior	2016-02-17 14:54:09 -08:00
Scott Lahteine	159ff94afd	Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977	2016-02-07 08:02:11 -06:00
Richard Wackerbarth	1635613c25	Backport cosmetic	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	e7b40bbe98	Change link to U8glib source	2015-12-10 06:33:29 -06:00
Scott Lahteine	9b23490f01	Clean up spacing in configs	2015-11-12 00:03:21 -06:00
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	2015-09-28 11:07:33 -05:00
Richard Wackerbarth	e01f5e1ef7	Cleanup	2015-09-17 10:44:23 -05:00
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	2015-09-14 07:58:08 -05:00
Richard Wackerbarth	20b4772155	Create DEBUG_LEVELING_FEATURE	2015-08-27 20:52:08 -05:00
Richard Wackerbarth	6292d9e815	Rename ENABLE_AUTO_BED_LEVELING With the introduction of the #if ENABLED(…) reads better than	2015-08-27 20:52:08 -05:00
Christian Lefrançois	9897a9147c	Update ABL comments (PR#95) * Updates the auto bed leveling comments ONLY. * Renames "Z probe" word usage in //comments and #errors properly.	2015-08-26 05:51:38 -05:00
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	2015-08-11 14:41:36 -05:00
Richard Wackerbarth	b227d8c128	Supply a VERSION in a short form for displays The long descriptor will still be available in M115	2015-08-03 08:21:09 -05:00
Richard Wackerbarth	329acc852e	Canonize Option flag USE_AUTOMATIC_VERSION	2015-08-03 08:08:37 -05:00
AnHardt	09571b7753	Boot-screen for the character displays Uses about 488 byte of progmem and 32 byte of RAM. For that configurable.	2015-08-03 07:13:00 -05:00
Scott Lahteine	1e2deff4fd	Rename BTENABLED to BLUETOOTH - For some reason it’s easy to forget what BT stands for, but it doesn’t need an abbreviation.	2015-08-02 22:56:50 -05:00
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	2015-08-02 21:59:41 -05:00
Scott Lahteine	37d1879386	Apply overridables to Configuration files	2015-07-31 00:03:36 -05:00
Scott Lahteine	edaaead7e0	Fix comment about SERVO_ENDSTOP_ANGLES	2015-07-30 23:35:57 -05:00
Scott Lahteine	0af2a80e06	Make SERVO_ENDSTOP_ANGLES 2-dimensional	2015-07-30 16:38:56 -05:00
Richard Wackerbarth	ae00fad75b	Rename as M100	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	ed7d45e8f5	Memory watcher	2015-07-27 20:31:59 -05:00
AnHardt	fd0e81b0c7	Distinguish between BUZZER and SPEAKER (PR#2513) A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC. A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC. There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer. To make these board able to handle a speaker * replace the PWM based tone()-function again with a on-delay-off-delay loop. Hopefully the last time I touch the beeper code.	2015-07-24 22:10:04 -05:00
AnHardt	8b876241bd	Some more servo code tweaks Just set up the pin. Don't move to a random position. Simplify servo::move() * servo::move() does not need the pin parameter - The pin is set during servo_init() with attach(). * servo::move() does not need a return value. SERVO_LEVELING is the wrong condition to deactivate the servos. Remove some temporary (Servo *) variables. SanityCheck for the servo indexes.	2015-07-24 22:04:49 -05:00
AndySze	00dbf69b6d	add MINIPANEL defines	2015-07-23 22:51:40 -05:00
AnHardt	4e14e152fa	Add Travis tests for CORXY and COREXZ	2015-07-23 19:52:48 -05:00
Scott Lahteine	d85861d296	Move macros, add ENABLED/DISABLED, add includes	2015-07-22 18:16:05 -05:00
Scott Lahteine	129f986ccf	Add COREXZ option to configurations	2015-07-19 16:17:03 -05:00
Scott Lahteine	391386dd94	Update configs for new servo deactivation	2015-07-15 19:13:40 -05:00
AnHardt	5243d8b523	Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default	2015-07-15 17:39:43 -05:00
AnHardt	49609f6c14	Activate the new servo.move() function by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp and removing the old configuration in the ABL part of Configuration.h	2015-07-15 17:39:43 -05:00
AnHardt	40b6edcad7	Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY. But it will work on all servo moves, not only the probe servo moves.	2015-07-15 17:39:43 -05:00
Scott Lahteine	c3c605c658	Move note about LiquidTWI2 to Configuration.h (PR#2406)	2015-07-09 05:33:17 -05:00
Scott Lahteine	dc40a5f6e0	Patch up more outdated config lines	2015-06-15 20:20:32 -05:00
Scott Lahteine	a274769f4f	Clean up spacing and comments Also clean up some trailing spaces in a few other sources	2015-06-15 20:20:31 -05:00
Scott Lahteine	d3bce05d54	Fix up spacing for filament sensor values	2015-06-15 20:20:31 -05:00
Scott Lahteine	b4b10a57fe	Fix configurator section directives and values lists	2015-06-15 20:20:31 -05:00
Scott Lahteine	bba14dcbe6	Move Z Safe Homing point to the middle of the movement range	2015-06-15 20:20:31 -05:00
Richard Wackerbarth	58941e543e	ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed #defining something just to define something else doesn’t make sense If you want SDCARDDETECTINVERTED, just define it yourself. If the previous code was intended to define, undefined and then again define the term, that code is improper.	2015-06-06 21:44:59 -05:00
Ed Boston	b94a0e1501	Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED The new define allows the sd card detect to be inverted or not from Configuration.h	2015-06-06 16:40:31 -05:00
AnHardt	d1f4471000	Merge pull request #2146 from Wackerbarth/Versioning Versioning	2015-06-02 18:31:21 +02:00
fmalpartida	11e3f3375d	Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing Updated LCD wiki location.	2015-05-31 21:20:26 +02:00
fmalpartida	93da52d011	Added support for OLED SSD1306 I2C based LCDs.	2015-05-31 18:53:29 +02:00
Jonathan Bastien-Filiatrault	e86f2342c0	Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed to reach its intended temperature. The head requires a low maximum power since I run on 24 volts and it has a somewhat low thermal mass.	2015-05-28 11:48:04 -04:00
Richard Wackerbarth	5ea139fd79	Revised Versioning mechanism	2015-05-25 15:53:14 -05:00
Scott Lahteine	38cc0b93c6	Merge pull request #1874 from AnHardt/Bulgarian Introduction of Bulgarian - language_bg.h	2015-05-22 13:59:50 -07:00
Ed Boston	152b681bb5	Added link to controller github Added the link to the github information about the ELB_FULL_GRAPHIC_CONTROLLER	2015-05-19 04:14:55 -07:00
AnHardt	e353d27430	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian	2015-05-18 23:56:53 +02:00
Ed Boston	ca8d1756d5	Define fixes Fixed a couple defines that were not changed or commented out.	2015-05-18 14:23:31 -07:00
Ed Boston	a83bf18ee1	More functional seperation Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h. Added U8GLIB_LM6059_AF to define display specific actions. Added reminder to compile in u8glib	2015-05-18 05:37:46 -07:00
Ed Boston	047e688e93	Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER Rename of define to avoid confusion between the controller and the display which had similar names.	2015-05-17 15:23:17 -07:00
Ed Boston	1999ac415c	Formatting Changes Fixes for some code formatting changes and commenting out the ADAFRUIT_ST7565 define that was left defined.	2015-05-17 13:39:24 -07:00
Ed Boston	41f8cdb3a6	ADAFRUIT_ST7565 Added support for new display type	2015-05-17 12:47:41 -07:00
Scott Lahteine	78beef2d73	Use Mendel default for INVERT_Y_DIR	2015-05-14 00:25:47 -07:00
Scott Lahteine	f65833931d	Formatting tweaks	2015-05-13 02:02:19 -07:00
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	2015-05-10 22:52:01 -07:00
Scott Lahteine	7f3252eea9	Merge pull request #1999 from paclema/Filrunout_configurable_script Added configurable script for filrunout from configuration.h	2015-05-08 04:39:59 -07:00
Scott Lahteine	181ccc884c	Edit thermal runaway description	2015-05-07 20:46:03 -07:00
paclema	26015b02d8	Fixed typo and updated Configuration.h of configurator	2015-05-03 02:39:34 +02:00
paclema	aedd580911	Updated all configuration.h examples	2015-05-03 02:28:43 +02:00
Scott Lahteine	425cd46c12	Merge pull request #1993 from AnHardt/TRP-bed Enable TRP for the bed	2015-04-29 19:44:50 -07:00
paclema	013a09dbe6	Added configurable script for filrunout form configuration.h	2015-04-29 21:38:40 +02:00
AnHardt	514d8ac460	Enable TRP for the bed in all Configurations.	2015-04-29 08:47:01 +02:00
Scott Lahteine	2610b8d047	Enable thermal runaway protection by default	2015-04-28 17:40:29 -07:00
AnHardt	b4b19a6cbd	Merge https://github.com/MarlinFirmware/Marlin into Bulgarian Conflicts: Marlin/Configuration.h Marlin/configurator/config/Configuration.h Marlin/example_configurations/Felix/Configuration.h Marlin/example_configurations/Felix/Configuration_DUAL.h Marlin/example_configurations/Hephestos/Configuration.h Marlin/example_configurations/K8200/Configuration.h Marlin/example_configurations/SCARA/Configuration.h Marlin/example_configurations/WITBOX/Configuration.h Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/example_configurations/makibox/Configuration.h Marlin/example_configurations/tvrrug/Round2/Configuration.h Conflicts with my Chinese implementation resolved.	2015-04-28 09:24:32 +02:00
Scott Lahteine	0970102950	Remove obsolete STRING_URL	2015-04-27 21:59:14 -07:00
AnHardt	6b1b71837c	Intit. commit for Chinese Edited the European part of 'ISO10646_CN.fon' to match the existing fonts. Added Chinese font to make_fonts.bat Created 'dogm_font_data_ISO10646_CN.h' Added Chinese to 'language.h' Added 'language_cn.h' with some minor edits. Added Chinese font in 'language_en.h' to not fall back to European font. Added cn to 'Configuration.h' Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names. In 'dogm_lcd_implementation.h' Added Chinese Font Made 1 pixel more room for the larger Chinese font on the status line. Changed geometry of the 'select bar' by one pixel. Changed the way the position for values and postcars are set.	2015-04-27 12:15:36 +02:00
Scott Lahteine	5c29fda167	Add a warning for DISABLE_[XYZ] options	2015-04-25 00:46:33 -07:00
AnHardt	3a27a78f9e	Commented REPRAP_DISCOUNT_SMART_CONTROLLER again and removed some tabs.	2015-04-20 15:01:43 +02:00
AnHardt	064f2b37d0	More Beeper clean up. Centralised beep code to lcd_buzz(). From gcode_M300() and lcd_quick_feedback(). Enforced max. duration for M300 to 5 seconds. Corrected description in 'Configuration.h' LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of LCD_FEEDBACK_FREQUENCY_DURATION_MS.	2015-04-20 11:11:13 +02:00
Scott Lahteine	74e4b42f7e	Default MACHINE_NAME to "3D Printer"	2015-04-12 17:17:41 -07:00
Scott Lahteine	ccbe2c4ea3	Apply CUSTOM_MACHINE_NAME to configurations - Replace “Mendel” with “RepRap”	2015-04-10 21:29:42 -07:00
AnHardt	56fc3a4835	bgr -> bg + update in documentation	2015-04-09 13:09:18 +02:00
AnHardt	6248c93f37	Introduction of Bulgarian - language_bgr.h Thank you @Nprod!	2015-04-09 01:26:48 +02:00
Edward Patel	7dc64efe67	Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS	2015-04-08 20:52:48 +02:00
Scott Lahteine	4788b59300	Thermistor values for configurator	2015-04-08 03:12:21 -07:00
Scott Lahteine	7431ef7e2d	Merge branch 'Development' into dev_version Latest upstream commits	2015-04-07 21:14:00 -07:00
Scott Lahteine	eb6e3886f4	Set version to "1.0.3 dev"	2015-04-07 20:38:43 -07:00
Edward Patel	a9ed39b12d	Moved checks into SanityCheck.h + removed previous added checks.	2015-04-07 22:58:08 +02:00
Edward Patel	002340f32c	Merge branch 'Development-Marlin' into Development	2015-04-07 22:49:12 +02:00
Scott Lahteine	967db181d0	Latest upstream commits	2015-04-06 21:46:18 -07:00
Edward Patel	d27c82a450	Added check for Delta printers in Mesh, #error not yet supported.	2015-04-06 23:03:06 +02:00
Edward Patel	9a093b2e8f	Added #error + mention not to enable ABL and Mesh at the same time	2015-04-06 19:38:59 +02:00
Richard Wackerbarth	46474cf2f2	Incorporate @section headers from configurator	2015-04-05 22:39:40 -05:00
Edward Patel	d24ea7c03f	Added Comment in hope of github seeing these updates	2015-04-05 05:14:06 +02:00
Edward Patel	ea10601406	Merge branch 'Development-Marlin' into Development Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2015-04-05 04:06:02 +02:00
quillford	b02a55e60f	Fixed scara directions Config said for a delta instead of for a scara	2015-04-04 15:26:35 -07:00
Scott Lahteine	c065da52ec	Spacing and spelling	2015-04-03 22:54:48 -07:00
Scott Lahteine	e0d4368cb5	Minor code cleanup, move NUM_AXIS out of config	2015-04-03 20:45:24 -07:00
Scott Lahteine	a469d796e1	Add cleanups needed for #1772	2015-04-03 18:14:57 -07:00
Scott Lahteine	c0ca26cd50	Merge branch 'Development' into fixup_probing Latest upstream commits	2015-04-03 18:05:17 -07:00
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	2015-04-03 15:31:35 -07:00
Edward Patel	6b91b7b411	Mesh bed leveling: Added G29 S3 + finer steps in manual probing. * Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually * Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h	2015-04-01 21:18:51 +02:00
Chris Roadfeldt	a57862e29f	Cleaning up code in prep for merge with upstream.	2015-04-01 11:40:24 -05:00
Chris Roadfeldt	a508d835db	Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. Updated documentation in Configuration.h. Cleaned up and commented some code relating to Z_PROBE_ENDSTOP. Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.	2015-04-01 02:14:55 -05:00
Chris Roadfeldt	c89b8368ee	Merge remote-tracking branch 'MarlinFirmware/Development' into Development Conflicts: Marlin/Marlin_main.cpp	2015-03-31 11:08:36 -05:00
Scott Lahteine	6ff1620fcb	Merge pull request #1753 from thinkyhead/fix_extruder_offset Fix EXTRUDER_OFFSET compiler error	2015-03-31 03:21:45 -07:00
Scott Lahteine	cda4bd4ad9	Correct the comment about M206	2015-03-31 03:20:15 -07:00
Scott Lahteine	935592cf6a	offsets off by default	2015-03-31 02:50:52 -07:00
Scott Lahteine	2a45922afe	Restore extruder_offset, init more simply	2015-03-31 02:49:47 -07:00
Chris Roadfeldt	45ece5afb1	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-03-31 03:07:57 -05:00
Scott Lahteine	ba2c7cb467	Update configs with all the latest	2015-03-30 23:24:33 -07:00
Chris Roadfeldt	3175c70c79	Manually synching back up with MarlinFirmware/Development.	2015-03-31 00:11:11 -05:00
Chris Roadfeldt	3be00cce6f	Merge remote-tracking branch 'MarlinFirmware/Development' into Development Conflicts: Marlin/Configuration.h	2015-03-30 23:59:01 -05:00
Scott Lahteine	5e82ed4f30	Restore ENDSTOPPULLUPS in Configuration.h	2015-03-30 21:15:16 -07:00
Chris Roadfeldt	80285251cc	More config cleanup work for Z_PROBE_AND_ENDSTOP.	2015-03-29 03:06:20 -05:00
Chris Roadfeldt	fe4549cd83	Config file Z_PROBE_AND_ENDSTOP description clean up.	2015-03-29 03:04:59 -05:00
Chris Roadfeldt	6125124d6c	Config file cleanup for Z_PROBE_AND_ENDSTOP support.	2015-03-29 02:29:16 -05:00
Chris Roadfeldt	324c14943b	Bug fixes for Z_PROBE_AND_ENDSTOP. Code cleanup for Z_PROBE_AND_ENDSTOP. Added Z_PROBE_PIN to pins_RAMPS_13.h	2015-03-29 02:16:09 -05:00
Chris Roadfeldt	fd823449ad	Added serial message for Z Probe trigger.	2015-03-28 05:42:38 -05:00
Chris Roadfeldt	44b88b41a2	Added credit for code.	2015-03-28 05:01:04 -05:00
Chris Roadfeldt	2979b40a7a	Fixed typo in Z Probe and Endstop section.	2015-03-28 04:41:03 -05:00
Chris Roadfeldt	9f3ff14008	Enabled separate Z Probe and Z Axis endstop use at same time. Typo fixes in comments in existing code.	2015-03-28 04:31:51 -05:00
Scott Lahteine	bc2f249cc6	Merge pull request #1622 from AnHardt/tm-utf-minus-kanji The big Language Pack	2015-03-27 18:24:19 -07:00
Scott Lahteine	abfcbd793f	Merge pull request #1693 from chris-bo/rework_lcd_beeper use only one implementation for beeper feedback	2015-03-27 17:03:38 -07:00
Scott Lahteine	78090275a9	Fix probe range editing - Increase the probe offset range to -20…20 - Apply the range limits to the menu item	2015-03-26 13:52:48 -07:00
AnHardt	20f909567a	Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji Conflicts: README.md Solved	2015-03-26 10:05:00 +01:00
Christian Bohn	eab5fad539	code formatting	2015-03-26 09:00:34 +01:00
Scott Lahteine	5eff15c409	Merge branch 'Development' into fixup_leveling Latest upstream commits	2015-03-25 21:24:38 -07:00
Scott Lahteine	5261d35737	Fix custom m-code behavior Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe	2015-03-25 21:20:50 -07:00
chris-bo	2dfd0e5ce7	Update Configuration.h documentation how to disable buzzer feedback	2015-03-25 12:44:29 +01:00
AnHardt	94330705c7	Move definition of PIDdT back to temperature.h make it unconditional remove all definitions in the 'Configuration.h's remove form 'Conditionals.h'	2015-03-25 11:51:41 +01:00
AnHardt	9d589cbb2a	Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji Conflicts: Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/language.h Conflicts solved	2015-03-24 16:59:15 +01:00
Scott Lahteine	4fbb80567e	Get upstream commits	2015-03-22 23:07:22 -07:00
Scott Lahteine	7717e1ce33	Fix bad insert in configuration	2015-03-22 21:48:46 -07:00
Scott Lahteine	146501215f	Fix mangled probe_pt calls - Address issue #1669 - Remove the TOPO_ORIGIN configuration setting	2015-03-22 21:45:20 -07:00
Scott Lahteine	15eb5d35a2	Merge branch 'Development' into config_testing Latest upstream commits	2015-03-21 15:42:45 -07:00
Scott Lahteine	2c9bd15625	Move LCD items to `Conditionals.h` - `Conditionals.h` is included twice, setting LCD values the first time	2015-03-21 15:24:57 -07:00
Edward Patel	a7e89d4cfa	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-20 15:46:01 +01:00
AnHardt	e72cb3e45d	Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji Conflicts: Marlin/dogm_lcd_implementation.h Marlin/ultralcd_implementation_hitachi_HD44780.h Fix merge conflicts 2	2015-03-20 13:35:47 +01:00
Scott Lahteine	63d5d28085	Merge branch 'Development' into config_testing Latest upstream changes	2015-03-20 04:15:18 -07:00
Scott Lahteine	b6d381f863	Divide up Conditionals to get LCD items early	2015-03-20 02:50:28 -07:00
Scott Lahteine	670006b919	Remove invariant code from Configurations - Add `Conditionals.h` with calculated configuration values - Add `SanityCheck.h` with checks for configuration errors - Remove equivalent code from all configurations - Move error checks from some sources to `SanityCheck.h` also - Fix initialization of count_direction in stepper.cpp	2015-03-19 22:22:23 -07:00
AnHardt	47c1ea72af	Merge https://github.com/kieranc/Marlin into PIDdebug Conflicts: Marlin/temperature.cpp Cleaned merge conflict. Codeposition had changed. Variable pid_input had vanished. Signed-off-by: AnHardt <github@kitelab.de>	2015-03-20 00:07:36 +01:00
AnHardt	e917477fec	Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji Conflicts: Marlin/dogm_lcd_implementation.h Marlin/fonts/make_fonts.bat Claerd conflicts with my own #1621. (His was easy. :-) ) corrected typo in fonts/README.fonts Applied changes to the new delta-configurations and deletet there some extra whitespace at the line-endings.	2015-03-19 12:35:43 +01:00
Edward Patel	8067a985ce	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level Fixed conflicts: Marlin/planner.h	2015-03-17 22:48:08 +01:00
AnHardt	1883e1bb60	Applied thinkyheads corrections from 2015-03-17	2015-03-17 11:23:44 +01:00
AnHardt	00b162a993	Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji Conflicts: Marlin/language.h Conflict cleaned	2015-03-16 17:13:49 +01:00
maverikou	8a739b6fba	Merge branch 'Development' into delta_auto_bed_level Conflicts: Marlin/Marlin_main.cpp	2015-03-16 08:24:26 +02:00
Edward Patel	e983a5ab92	Disable option. Enable for use/test.	2015-03-16 02:50:11 +01:00
Edward Patel	f34b9c83d1	Added comment about MESH_NUM axis points.	2015-03-16 01:48:46 +01:00
Scott Lahteine	a686c9878f	Move TOPO_ORIGIN define to Configuration.h - Addressing issue #1608	2015-03-15 15:49:36 -07:00
Edward Patel	8005d22c81	Added menu option for bed leveling.	2015-03-15 23:24:32 +01:00
Edward Patel	0e51e53813	WIP. Adding bed leveling code.	2015-03-15 23:24:32 +01:00
AnHardt	2f374f1465	Removed Kanji.	2015-03-15 16:44:37 +01:00
Scott Lahteine	4b50205f11	Merge branch 'Development' into marlin_configurator Latest upstream changes	2015-03-15 06:37:32 -07:00
AnHardt	96f8d20f2f	Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe	2015-03-13 14:26:58 +01:00
Scott Lahteine	08694339eb	Merge branch 'Development' into marlin_configurator Conflicts: Marlin/Configuration.h	2015-03-11 15:47:32 -07:00
Mehmet Sutas	b373826428	Merge pull request #2 from MarlinFirmware/Development update	2015-03-12 00:07:39 +02:00
AnHardt	5bafb1fe1f	Add user test to language_test.h and make it default. Improve description in Configuration.h	2015-03-11 20:46:52 +01:00
alexborro	9157cbd8f3	Add Travel Acceleration and change the M204 options Added option to set Travel Acceleration (non printing moves). The M204 options was a non sense (S for printing moves and T for retract moves). It has been changed to: P = Printing moves R = Retract only (no X, Y, Z) moves T = Travel (non printing) moves I will add this info o G-Code wiki in reprap.org. I also advise to put this info in Marlin next version changelog.	2015-03-11 13:19:02 -03:00
AnHardt	817751d4b9	Added new languages, the Cyrillic display and a test language to find out your hardware.	2015-03-11 11:10:35 +01:00
alexborro	5bf42066fa	Fix typo in configuration.h	2015-03-10 15:06:34 -03:00
alexborro	8a4b62d081	Set more regular setup in configuration.h	2015-03-10 14:41:21 -03:00
alexborro	60ceca1bc1	Add speed configuration for home-bumping movement	2015-03-10 14:08:32 -03:00
Mehmet Sutas	cfc6a3a87a	Filament Runout Sensor Feature With this change a mechanical or optical switch may be used to check the availability of the filament and when the filament runs out an M600 (filament change) command is issued. This is only done while printing with an SD card. This feature was requested several times (issue #679), but the requests were not accepted since it was believed that this situation should be handled at host side. However during an SD print the control is totally on firmware and I think that during an SD print it should be handled by the firmware. The original code was posted at reprap forum (http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only corrected some bugs of the code and improved it by adding definitions to the configuration.h in order to make it more standardized.	2015-03-07 22:43:15 +02:00
maverikou	e6862700af	Add Z_RAISE_AFTER_PROBING to all config files	2015-03-07 20:55:30 +02:00
Scott Lahteine	0f3b7d5575	Update annotated configurations - Also update base configs	2015-03-07 01:07:40 -08:00
Scott Lahteine	d085725c86	More sanity-checking for ABL - Moved sanity-checks to Marlin_main.cpp - Applied to other configuration files - Fixed formatting of ABL output - Passing verbose level to probe_pt - Miscellaneous cleanup - Put CONFIG_STEPPERS_TOSHIBA into Configuration.h	2015-03-06 22:14:34 -08:00
Scott Lahteine	32744d41a9	Do sanity checking on LRFB values - Setting boundaries based on configured limits, contrasting with G28 (which forgets these limits?)	2015-03-04 21:32:11 -08:00
Scott Lahteine	a99470fbb0	Merge pull request #1527 from maverikou/panel_one Added support for PanelOne from T3P3.	2015-02-26 16:01:13 -08:00
maverikou	8742b6bd56	Merge branch 'Development' into panel_one	2015-02-24 22:24:57 +02:00
AnHardt	c6d2ebe452	Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable.	2015-02-24 11:02:16 +01:00
alexborro	a57869ba49	Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.	2015-02-22 11:02:04 -03:00
Maverikou	2e166f5337	Added support for PanelOne from T3P3.	2015-02-22 09:14:43 +02:00
alexborro	afc737ca0c	Fix CoreXY Homing Routine. Fixed how stepper ISR figure it out when the head (extruder) is going to Min or Max direction. Added Homing to Max Endstops.	2015-02-13 14:38:05 -02:00
Scott Lahteine	7866fa161f	Merge pull request #1476 from Natealus/Development Compiling errors with 4 Extruders defined and Viki 2 Implementation	2015-02-12 16:56:55 -08:00
kieranc	b9ed873827	Enable PID debugging for heated bed	2015-02-10 14:13:06 +01:00
Natealus	f4b0a40abb	Additional fixes to temperature.cpp and found another missing line Looks like INVERT_E3_DIR was missing in the configuration.h also as I did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also added those lines too. Additional formatting to make the comments line up better in that section.	2015-02-08 15:43:58 -07:00
AnHardt	8e92729141	Make display language configurable in Configuration.h	2015-02-08 13:45:22 +01:00
Natealus	38a500d05c	Viki 2 Implementation I've insert the define and pointer entries for the Viki 2 and miniViki from Panucatt in all of the example configs and main config. With these additions and with pins done in the old single pin.h style...I was able to get the display working fine save for needing to turn Delta Segments per Second down. But that's a common graphics lcd issue being looked into right now. I need assistance in understanding how the new divided pins files fit together because my previous attempts at trying to get it to work appropriately didn't seem successful. This originally came from trying to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg X3 Pro. It only comes with one set of connectors and they're Min Endstops. My previous experience didn't turn out well trying to tell the firmware to home to the Min Endstops so the best solution I found was to swap the pins in the firmware. If I'm missing a conflict with a setup other than delta please let me know, but it makes sense in my setup.	2015-02-08 03:14:59 -07:00
Natealus	697ee2dc50	Compiling errors with 4 Extruders defined Here were a few changes that I had to make/add lines for the 4th hotend. A compiling problem in the Temperature.cpp and missing lines in configuration.h and configuration_adv.h. I added these lines in all of the example configs too.	2015-02-08 01:05:05 -07:00
AnHardt	33f8580255	Merge branch 'lcd-width' into b-	2015-02-03 14:45:58 +01:00
AnHardt	0c24bb6cfc	Adjust LCD_WIDTH to make better use of DOGM LCDs	2015-02-03 14:21:43 +01:00
AnHardt	65642592ee	Added dualline version.	2015-02-03 12:25:36 +01:00
AnHardt	f9cc1df00b	Droped URL from bootsplash.	2015-02-03 11:14:27 +01:00
Scott Lahteine	b3973ed224	Fix HD44780 misspelled as HD44870	2015-02-02 22:33:58 -08:00
Scott Lahteine	6d81968db5	Merge pull request #1450 from docdawning/Development Normalized section headers, added some headers, added help URLs for newb...	2015-02-02 21:17:06 -08:00
DocDawning	055c4beaf9	Normalized section headers, added some headers, added help URLs for newbies	2015-02-02 14:11:09 -07:00
AnHardt	26e55471f8	Update example configurations.	2015-02-01 13:46:32 +01:00
AnHardt	85385be132	Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description.	2015-02-01 13:33:25 +01:00
AnHardt	27c638803e	Defined three charsets.	2015-01-30 10:28:22 +01:00
AnHardt	8c792c7b22	Make STRING_VERSION and VERSION_STRING the same	2015-01-26 15:40:44 +01:00
daid	53f971095d	Revert "Reduce PROGMEM warnings"	2015-01-16 16:48:22 +01:00
Bo Herrmannsen	ab074dac17	Merge pull request #1344 from grob6000/independent_pid Independent PID parameters for each extruder	2015-01-13 12:10:37 +01:00
Bo Herrmannsen	d4a665694a	Merge pull request #1350 from odewdney/Development Reduce PROGMEM warnings	2015-01-13 11:26:50 +01:00
odewdney	23bfe30036	moved include themister to temperature.c	2015-01-11 18:18:32 +00:00
grob6000	bf2c923db5	Make multiple PID parameters a config option * Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID parameters to be used where this would be preferable (e.g. dual identical extruders) * When disabled, will use `float Kp, Ki, Kd, Kc;` as before. Preprocessor macros used to switch between. * ultralcd.cpp defines extra menus for extra parameters only where required * M301 reports `e:xx` only if independent pid parameters enabled * EEPROM structure still leaves space for 3 extruders worth, when undef will save single parameter to all extruder positions, but only read the first * Switching off saves approx 330 B with no LCD enabled, 2634B with LCD (RRD) enabled: this is significant. * LCD modifications should be tested.	2015-01-11 13:50:17 +11:00
Steffen Vogel	8f0dba7cbf	adding string for bouts splash string to config	2015-01-09 18:48:30 +01:00
Alex Borro	2bbb68be8a	Fix calculation of BAL grid fitting into the bed The previous calc was wrong. Between N points there are only N-1 gaps, not N. So changing AUTO_BED_LEVELING_GRID_POINTS to (AUTO_BED_LEVELING_GRID_POINTS-1)	2015-01-09 10:17:33 -02:00
andrewsil1	269ec9f87f	Fix grammar/typos in new Configuration.h option (For the SLOW_PWM_HEATERS option)	2015-01-07 12:41:09 -08:00
Dino Del Favero	5cfe13f240	Correct some mistakes	2015-01-06 21:55:08 +01:00
DinoMesina	6730335657	Update Configuration.h	2015-01-06 18:06:02 +01:00
Lane Roberts	2701dd8a17	Due to the fix for #1248 , X and Y probe offsets must not be floats. The compiler does not support comparing float values: "error: floating constant in preprocessor expression" The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.	2014-12-31 12:34:59 -06:00
Caleb Anderson	991a74b75b	Move delta calibration menu to sample delta configuration. Turn off by default.	2014-12-29 18:03:56 -07:00
Caleb Anderson	5b336a4cdb	Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h	2014-12-29 10:13:00 -07:00
fmalpartida	ec33df0554	Merge branch 'SAV-MkI_merge' into Development Tested for SAV MKI and SAV 3D LCD on lewihe.	2014-12-28 19:54:06 +01:00
alexborro	3afe66bb0c	Fix issues #1248 , #1240 - Fixed issue when BAL area probing is shorter than it should be for grid probing - Warning when BAL activated with Delta Kinematics - Fix XY_TRAVEL_SPEED when homing Z axis	2014-12-28 13:27:39 -02:00
David Forrest	cf52c48d19	Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX. Current defaults are all 255. If it makes sense to reduce them, they should come down together, and be in a PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.	2014-12-27 15:26:09 -05:00
alexborro	d74aabf259	Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation"	2014-12-21 10:06:05 -02:00
John Davis	81568c3c6d	Update Configuration.h Changed Auto Bed Level to Auto Bed Compensation	2014-12-19 17:06:56 -05:00
Scott Lahteine	3b1f186c0c	Clean up configs	2014-12-18 13:59:31 -08:00
Scott Lahteine	f83d0f2a68	Defines for electronics boards Added boards.h which contains defines for all the board numbers, plus some shorthand macros for less typing.	2014-12-18 13:59:31 -08:00
Bo Herrmannsen	280504e2e0	Merge pull request #908 from alromh87/Marlin_v1 Support for Gen3 Monolithic electronics	2014-12-17 22:28:07 +01:00
Bo Herrmannsen	91d740e128	Merge pull request #1141 from filipmu/Filament-Sensor Display filament sensor data on a 20x4 LCD or Graphical LCD	2014-12-17 20:38:30 +01:00
Filip Mulier	d84934d8c5	Display Filament Sensor data on 20x4 LCD Changes to support displaying the real-time filament width and the volume factor on a 20x4 LCD. The data is displayed on the 4th line. First the status message is displayed for 5 seconds, and then the filament data is displayed. The status message can be seen by re-selecting the info screen in the menu.	2014-11-10 21:43:58 -06:00
Filip Mulier	5c8107bcdd	Commented out FILAMENT_SENSOR #define Commented out the FILAMENT_SENSOR define so that it is not enabled by default. Code does not work on all hardware variants.	2014-11-09 13:26:02 -06:00
Erik van der Zalm	058e446531	Merge pull request #1037 from filipmu/Filament-Sensor Support for a filament diameter sensor	2014-10-11 22:56:01 +02:00
Erik van der Zalm	aaaf8fe8dd	Merge pull request #1068 from darkjavi/Marlin_v1 Added profile for RAMPS with 2 extruders and 1 fan, no heated bed	2014-10-06 13:41:38 +02:00
Erik van der Zalm	ce85515428	Merge pull request #1082 from Fourmi/Marlin_v1 Add thermistor table	2014-10-06 13:39:36 +02:00
Scott Lahteine	f989bd5435	Simple code cleanup. Rename "homeing" to homing.	2014-10-05 13:20:53 -07:00
Fourmi	b5dc228a7a	Update configuration.h Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"	2014-09-27 09:02:58 +02:00
Fourmi	3cbb2f56c6	Update configuration.h Add another comment on configuration.h for the value of thermistor. I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ? Thx	2014-09-26 22:01:06 +02:00
Javi	40ba644bb4	Added profile for RAMPS with 2 extruders and 1 fan. modified: Marlin/Configuration.h modified: Marlin/pins.h	2014-09-06 02:53:36 +02:00
Filip Mulier	fe3a09bbcf	Correct analog sampling time for additional A to D sample Adjusted the #define PID_dT to reflect 10 A to D sample steps, vs original 8.	2014-09-01 06:26:19 -05:00
Erik van der Zalm	018b68a5c4	Merge pull request #976 from cocktailyogi/SCARA_by_Yogi Implemented SCARA-Maths	2014-08-28 16:32:52 +02:00
Erik van der Zalm	0fbfb1bf82	Merge pull request #991 from bonm014/patch-1 Leapfrog controller board support	2014-08-28 16:27:52 +02:00
Erik van der Zalm	68dd5e635e	Merge pull request #1024 from oliasmage/Marlin_v1 Adding Z Probe via sled mounted endstop	2014-08-28 16:15:54 +02:00
Filip Mulier	e3c88a5120	Filament sensor changes to config file Update the config file for improvements and clarifying what diameter to use in the slicer software.	2014-08-16 07:08:09 -05:00
Roxy-3DPrintBoard	0adbc79571	Fix Default Configuration so Auto Bed Leveling is off This snapshot has the Auto Bed Leveling turned off because most Marlin users do not have that feature.	2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard	0091865583	Z_PROBE_REPEATABILITY test Z_PROBE_REPEATABILITY test for Auto Bed Leveling. Implemented as M48 with extra user specified options. Full support at http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code	2014-08-09 15:37:23 -05:00
Filip Mulier	85649a4549	Real-time filament diameter measurement and control This feature allows the printer to read the filament diameter automatically and adjust the printer in real time. Added code to read an analog voltage that represents a filament diameter measurement. This measurement is delayed in a ring buffer to compensate for sensors that are a distance away from the extruder. The measurement is used to adjust the volumetric_multiplier for the extruder. Some additional g codes (M404, M405, M406, M407) are used to set parameters and turn on/off the control. g code M221 is updated. Pins for RAMPS1.4, RAMBO, and Printrboard are identified for analog input. The configuration file is updated with relevant user parameters.	2014-08-06 19:30:57 -05:00
Charles Bell	e7707aedbc	Commented out new #defines in Configuration.h.	2014-08-04 10:18:25 -04:00
Charles Bell	0a8dc0e96b	Added documentation to the README.md for the sled Z probe option. CAB	2014-08-04 10:07:43 -04:00
cocktailyogi	2f4a20257c	imported last Marlin changes	2014-07-20 13:49:26 +02:00
alexborro	50b4e86f75	Add "Thermal Runaway Protection" feature This is a feature to protect your printer from burn up in flames if it has a thermistor coming off place (this happened to a friend of mine recently and motivated me writing this feature). The issue: If a thermistor come off, it will read a lower temperature than actual. The system will turn the heater on forever, burning up the filament and anything else around. After the temperature reaches the target for the first time, this feature will start measuring for how long the current temperature stays below the target minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS). If it stays longer than _PERIOD, it means the thermistor temperature cannot catch up with the target, so something may be wrong. Then, to be on the safe side, the system will he halt. Bear in mind the count down will just start AFTER the first time the thermistor temperature is over the target, so you will have no problem if your extruder heater takes 2 minutes to hit the target on heating.	2014-07-18 15:28:01 +02:00
bonm014	b5417be109	Update Configuration.h Leapfrog added to the board list	2014-07-03 21:03:22 +02:00
alexborro	43c298a7a9	Add "Thermal Runaway Protection" feature This is a feature to protect your printer from burn up in flames if it has a thermistor coming off place (this happened to a friend of mine recently and motivated me writing this feature). The issue: If a thermistor come off, it will read a lower temperature than actual. The system will turn the heater on forever, burning up the filament and anything else around. After the temperature reaches the target for the first time, this feature will start measuring for how long the current temperature stays below the target minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS). If it stays longer than _PERIOD, it means the thermistor temperature cannot catch up with the target, so something may be wrong. Then, to be on the safe side, the system will he halt. Bear in mind the count down will just start AFTER the first time the thermistor temperature is over the target, so you will have no problem if your extruder heater takes 2 minutes to hit the target on heating.	2014-06-30 15:22:49 -03:00
cocktailyogi	512f2a3136	restore Branch from Backup sorry for that	2014-06-23 17:09:57 +02:00
Greg Tan	6e6e4e2143	Added thermistor table for the 500C thermistor shipped with the Pico hot end.	2014-06-08 09:35:04 +08:00
Dim3nsioneer	8a32c5395b	renaming the disable inactive extruder feature	2014-06-02 14:07:02 +02:00
Dim3nsioneer	29e7639933	Add switch unused feeder(s) off Having the non-active feeder motors powered on all the time is not necessary. A feature to deactivate the unused feeder motors has been implemented. The feature is enabled on default but can be switched off in the configuration.	2014-06-02 08:13:09 +02:00
David Forrest	09b84faa00	Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0	2014-05-29 17:19:16 -04:00
Alejandro Romero	1c9a70cee9	Support for Gen3 Monolithic electronics Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW TODO: Add support for tipmanager	2014-05-06 19:24:20 -05:00
daid	2acd3792fc	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2014-05-01 12:03:47 +02:00
daid	8b4c4aa5c3	Add feature to check&retry CRC read errors on SD.	2014-05-01 12:03:41 +02:00
Cameron Lai	da6b536182	Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed	2014-04-24 16:49:42 +08:00
Nutz95	3161740df9	This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin	2014-04-13 17:03:20 +02:00
Gabe Rosenhouse	d3f305332a	Allowable range now includes default value	2014-04-06 19:45:56 -05:00
Gabe Rosenhouse	b0aeac117f	Adjustable Z probe offset, via custom M-code	2014-04-06 19:45:56 -05:00
David Forrest	b0093a1513	thermistortables.h: Add comments that table 60 uses beta=3950.	2014-03-26 23:41:10 -04:00
Gabe Rosenhouse	174b8d99d5	Simplify 3-point probing using new code only	2014-02-19 21:48:05 -08:00
Gabe Rosenhouse	3b718b816c	better documentation	2014-02-19 14:04:37 -08:00
Gabe Rosenhouse	34fd59c370	ABL at any points	2014-02-19 13:18:21 -08:00
nothinman	3f455889d0	Merge pull request #769 from Cylindric3D/typofixes_1 Various typo fixes - only in comments, no code changes.	2014-02-17 11:30:01 +00:00
nothinman	d4ba23bc28	Merge pull request #770 from josefpavlik/Marlin_v1 Marlin v1	2014-02-17 11:27:05 +00:00
Mark Hanford	ab0d3c4fb3	Various typo fixes - only in comments, no code changes.	2014-02-14 11:48:24 +00:00
Josef Pavlik	831fc2a952	Pt100 and Pt1000 temperature sensors handling	2014-02-14 12:26:27 +01:00
daid	71bb3a8133	Add comments for Ultimainboard 2.0 configuration.	2014-02-13 10:53:46 +01:00
Jim Morris	b819fc53ca	Add Azteeg X3 Pro as motherboard 68 Add digipot i2c control for MCP4451 Allow M907 to set i2c digipot currents in amps Fix Makefile to allow Azteeg motherboards Fix Makefile to allow Wire libraries only Add beeper pin for Azteeg X3 Pro	2014-02-05 01:47:12 -08:00
ErikZalm	e1ae7952eb	Merge pull request #743 from Opticalworm/Marlin_v1 Improved support for panelolu2 encoder and buzzer	2014-02-03 12:33:10 -08:00
David Forrest	a5f53f0cf3	Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS	2014-02-03 14:50:28 -05:00
Ronald	8d162e5bd7	Improved support for panelolu2 encoder and buzzer I added #define for LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default buzzer sound. When selecting Panelolu2 in configuration.h: - it automatically sets the correct ENCODER_PULSES_PER_STEP and ENCODER_STEPS_PER_MENU_ITEM. - if LCD_USE_I2C_BUZZER is defined it will also set the default LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS When selecting the sanguinololu 1284p the following is true: - its now enables LARGE_FLASH - It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is defined	2014-02-03 07:45:03 +00:00
David Forrest	76cf07c3f7	Configuration.h: Use OVERSAMPLENR in dT_PID definition.	2014-01-21 23:25:51 -05:00
fsantini	6ae7f7870d	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2013-12-23 12:20:32 +01:00
-	e5d3044801	Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability	2013-12-08 21:34:56 +01:00
Michal Dyntar	e8786bf110	Added support for Cheaptronic v1 electronic	2013-12-07 13:29:47 +01:00
fsantini	cc2925b705	Implemented a least squares fit of the bed equation for auto bed leveling. The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here: http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html (see qr_solve.cpp for further copyright information)	2013-12-06 21:46:25 +01:00
Alex Borro	b33375d438	Z Axis Safe Homing when using Z Probe Recommended for those who are using the Z Probe for Z Homing (as Z-Endstop) This feature has two changes: 1) Allow user to choose where the Z Probe will touch the bed when homing all axis together (G28) by setting below defines: Z_SAFE_HOMING_X_POINT Z_SAFE_HOMING_Y_POINT 2) Prevents the user to perform Z Axis Homing when the Z Probe is outsite bed.	2013-11-27 22:37:35 -02:00
Erik van der Zalm	48a185d004	Fixed compile errors from bad commits.	2013-11-10 16:36:37 +01:00
ErikZalm	59b96e323e	Merge pull request #640 from fmalpartida/SAV-MkI Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD	2013-11-10 07:26:08 -08:00
fmalpartida	7b556d2e96	Added BT support on AT90USB devices Added AT90USB device BT connectivity support using second UART.	2013-11-03 19:57:06 +01:00
Kaz Walker	a5e8575829	Add UUID support to M115 responses.	2013-11-01 14:51:50 -06:00
fmalpartida	b5a964fcc5	Initial SAV MkI (RepRap CloneWars board) integration. Included support for BT dongle on AT90USB boards. Added LCD Shift Register LCD control Included support for RepRap Clone Wars project board (SAV MKI).	2013-10-30 11:45:32 +01:00
dumle29	f941203172	PS_ON configurable boot state Allows the user to select wheter or not the PSU should be turned on or kept in standby when marlin boots	2013-10-29 18:44:56 +01:00
Erik van der Zalm	8a08cca0f2	Added temperature status less. Hopefully fixed viky button handling without braking other boards	2013-10-20 12:12:35 +02:00
ErikZalm	6a803ba9c5	Merge pull request #590 from timkoster/Marlin_v1 Added BlinkM support over i2c	2013-10-20 00:51:35 -07:00
Alex Borro	6f85a8c7aa	Bed auto Leveling change: Raise Z before homing - Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance before homing. This is useful to avoid Z-Probe collision when hotend is near bed. - Fixed the issue of Z not going bellow Z_PROBE_OFFSET when "min_software_endstops" is true. Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after homing.	2013-10-12 17:28:11 -03:00
Alex Borro	253dfc4bc1	Bed Auto Leveling feature Check the Readme for instruction how to enable and configure the feature	2013-09-29 13:20:06 -03:00
phq1910	57173739a1	Update Configuration.h Include CPU Sethi 3D	2013-09-26 11:29:44 -03:00
Erik van der Zalm	0dca49a7c0	Added Azteeg X3 board.	2013-09-24 17:31:16 +02:00
Erik van der Zalm	d8c2c810b4	Added info to the delta configuration files in the configuration.h file	2013-09-23 23:29:46 +02:00
Erik van der Zalm	9bc88f8bab	Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file	2013-09-23 23:25:11 +02:00
Tim Koster	61db046b32	Added #ifdef BLINKM around new code. Also refined BlinkM.h.	2013-09-20 10:57:42 +03:00
Erik van der Zalm	3626b5ad8b	Removed Delta from the default config file. Changed EEPROM CHITCHAT behavior. M503 is always enabled.	2013-09-14 13:50:09 +02:00
Tim Koster	88dfeefca3	Define BlinkM default disabled	2013-09-10 12:32:21 +03:00
Tim Koster	5350faf2a2	Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1	2013-09-10 12:27:26 +03:00
Tim Koster	7016cc9511	Added BlinkM support over i2c	2013-09-10 12:18:29 +03:00
Tim Koster	3b315b3da0	Added BlinkM support over i2c	2013-09-06 22:25:39 +03:00
Nicolas Rossi	a54fe2d73c	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 Conflicts: Marlin/Marlin_main.cpp	2013-08-03 13:05:56 +02:00
hg42@gmx.net	2ca983568d	separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)	2013-08-01 15:06:39 +02:00
Nicolas Rossi	9bf1cf1b22	Pre-calculate diagonal rod length squared	2013-07-30 14:09:21 +02:00
Nicolas Rossi	4623e78ce0	Added Honeywell thermistor 135-104LAF-J01	2013-07-30 14:02:18 +02:00
Guillaume Seguin	34da3a0a3f	Merge github.com:ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/language.h	2013-07-23 21:46:41 +02:00
Erik van der Zalm	c4a2077951	M109 and M190 now wait when cooling down if R is used instead of S. M109 S180 waits only when heating. M109 R180 also waits when cooling.	2013-07-14 21:10:24 +02:00
Erik van der Zalm	6397b3339c	restored configuration.h defaults	2013-07-14 15:49:03 +02:00
Michael Mayer	e509cdbeb0	added contrast control function for gLCDs	2013-07-14 15:28:26 +07:00
Michael Mayer	99b7e926e7	added MaKr3d Melzi board	2013-07-14 15:17:55 +07:00
Erik van der Zalm	ecf3ab5de4	Added thermistor 60 to configuration.h	2013-06-27 23:25:51 +02:00
Nicolas Rossi	2daa85918e	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp Marlin/language.h Marlin/pins.h Marlin/ultralcd.cpp	2013-06-20 23:59:56 +02:00
Erik van der Zalm	2015989f84	Added DISABLE_MIN_ENDSTOPS	2013-06-18 19:20:26 +02:00
Christian Inci	648d45cfb2	Fix Pin Description Typo Reverse 'Bed' and 'Fan' at the RAMPS 33 Description. Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>	2013-06-16 23:35:33 +02:00
lajos	02dee80fa5	added Azteeg X1 motherboard	2013-06-15 16:58:17 -04:00
Erik van der Zalm	e34c9981ab	Delta disabled by default	2013-06-11 22:33:58 +02:00
Erik van der Zalm	7ad12be763	Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1 Conflicts: Marlin/Configuration.h README.md	2013-06-09 23:10:41 +02:00
Erik van der Zalm	408169aef4	Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1 Conflicts: Marlin/Configuration.h Marlin/language.h Marlin/pins.h	2013-06-09 22:57:40 +02:00
Erik van der Zalm	bd96d22bfb	Merge branch 'Marlin_v1' into thinkyhead Conflicts: Marlin/Configuration.h Marlin/Configuration_adv.h Marlin/Marlin.h Marlin/Marlin_main.cpp Marlin/Servo.cpp Marlin/language.h Marlin/pins.h Marlin/planner.cpp Marlin/ultralcd_implementation_hitachi_HD44780.h README.md	2013-06-09 22:26:47 +02:00
Erik van der Zalm	6f4a6e531c	Merge branch 'deltabot' into Marlin_v1	2013-06-09 13:55:18 +02:00
Erik van der Zalm	ff6fa09ecf	Moved corexy implementation from stepper to planner (Thanks iquizzle)	2013-06-09 13:10:06 +02:00
Erik van der Zalm	c8dcc7c208	Allow increasing the software PWM frequency.	2013-06-09 12:52:49 +02:00
Erik van der Zalm	373f3ecab3	Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp Marlin/pins.h	2013-06-09 00:51:58 +02:00
kiyoshigawa	6a81291c57	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 This should fix issues with pull request 467, I hope. Conflicts: Marlin/Configuration.h Marlin/Marlin.pde Marlin/ultralcd_implementation_hitachi_HD44780.h	2013-06-08 08:48:18 -06:00
BorisLandoni	c1cb5977ee	Update Configuration.h	2013-06-08 14:37:39 +02:00
BorisLandoni	8a5bd8a808	Update Configuration.h	2013-06-08 14:37:17 +02:00
BorisLandoni	6588933c04	Update Configuration.h	2013-06-07 18:36:16 +03:00
Scott Lahteine	5dabc95409	Apply all changes from latest Marlin_V1 Diffed and merged, preserving my updates	2013-06-06 15:49:25 -07:00
Gord Christmas	f4f30c9d64	Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.	2013-06-06 07:36:52 -07:00
Erik van der Zalm	79374f0b93	Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1	2013-06-05 17:44:48 +02:00
kiyoshigawa	4b19c8552e	Fixing changed Configuration.h settings to be default values per ErikZalm Request.	2013-06-04 12:01:55 -06:00
Erik van der Zalm	5090c56651	More redundant temp sensor changes. (After testing and debugging by reifsnderb)	2013-05-29 19:29:30 +02:00
Gatulibu	b78fa6bb70	Added support for Megatronics v2.0 and Minitronics v1.0 merged from code downloaded from reprapworld.com	2013-05-28 14:03:31 +02:00
Erik van der Zalm	9be61cdc02	Added redundant temp sensor	2013-05-26 17:57:49 +02:00
Alexander Kasimir	e2ff536b03	Fixed typo in Comment	2013-05-22 16:02:03 +03:00
Robert F-C	0d4a9444c4	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2013-05-19 08:50:58 +10:00
Gord Christmas	28ada096e2	Adding servo documentation	2013-05-18 06:01:58 -07:00
Robert F-C	dfa549f268	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2013-05-18 21:59:39 +10:00
Gord Christmas	dc59f07d24	First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.	2013-05-16 07:03:01 -07:00
Erik van der Zalm	bd2cd4903e	Added #ifdef BARICUDA around the BariCUDA changes	2013-05-14 23:56:32 +02:00
gregor	2739c26c4f	changes: - changed the variables from keypad to reprapworld_keypad - added a missing ifdef check	2013-05-10 22:20:02 +02:00
gregor	6fb9573157	added support for the reprapworld keypad	2013-05-10 21:57:17 +02:00
Tim Anderson	1fa61c297e	Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.	2013-05-06 23:23:54 -06:00
kiyoshigawa	b27a59f41e	Added support for Elefu RA Board and Elefu Control Panel	2013-05-06 08:44:38 -06:00
Scott Lahteine	0ef54f2f85	Make M303 silent when "S0" is sent If S is left out perhaps it should be silent, but check the spec for this M code.	2013-05-02 09:55:15 -07:00
Scott Lahteine	a200521eab	Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h Also cosmetic comment changes and spelling corrections in printed messages	2013-05-02 09:22:58 -07:00
Martin Renold	1a397825f9	fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error	2013-05-01 08:30:24 +02:00
Robert F-C	c3cdaceab3	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2013-04-29 22:13:55 +10:00
Robert F-C	788d62bcc4	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.cpp Marlin/ultralcd_implementation_hitachi_HD44780.h	2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz	d71f1e9bf6	Add (as an option) slower SD transfer mode	2013-04-24 10:50:57 +02:00
MaikStohn	13596e8722	Added RepRapDiscount FULL GRAPHIC Smart Controller	2013-04-16 14:21:39 +02:00
daid303	c80a78bb70	Lower the default max E feedrate a bit. With the stepper fix this is much to high.	2013-04-12 13:54:38 +02:00
ErikZalm	7a5c474d91	Update Configuration.h	2013-03-28 21:27:50 +01:00
ErikZalm	9fb8bd5685	Merge pull request #433 from whosawhatsis/bang-mode Separate PID_MAX from BANG_MAX	2013-03-25 13:11:34 -07:00
Robert F-C	9322c408c6	Updated for LiquidTWI2 library version 1.2.3 The new version of the library means that PANELOLU no longer needs to be defined in LiquidTWI.h (the library file can be used as is) and the new version of the library also enables the buzzer on the Panucatt VIKI panel.	2013-03-24 18:19:58 +11:00
whosawhatsis	fd5b7e0cec	Separate PID_MAX from BANG_MAX This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher than PID_MAX. This is useful for powerful heaters to heat quickly in bang-bang mode, but use a lower duty cycle that is easier to stabilize in PID mode.	2013-03-22 18:16:26 -07:00
blddk	72419f69a9	Added rumba	2013-03-22 18:41:54 +01:00
Nicolas Rossi	aba67e2449	No bed config for RAMPS The motherboard 35 is a config without bed with this pins setting : D8 Extruder D9 Fan D10 Controller Fan	2013-03-05 15:51:24 +01:00
Robert F-C	7bad72359c	Support encoder click on PANELOLU2 being read through I2C This change also handles the case where the pause/stop/restart button on the VIKI is not used. Make LCD I2C buzz sound the same as the normal buzz (300ms is too long for quick feedback).	2013-03-03 18:47:50 +11:00
Robert F-C	1daf2f3256	Number of extruders is not an advanced configuration - it is a basic property.	2013-03-02 16:14:19 +11:00
Dirk Eichel	b2c1c64fb1	Add Motherboard variant 64 - STB V1.1 Definition for the graphic LCD are already in it, they will not harm the configuration as they are only defined constants	2013-03-01 17:39:54 +01:00
Robert F-C	6beb42cdf6	Attempt to address Bernhard's comments Refactor configuration to try to make items clearer (what defines a panel vs what is user changeable).	2013-03-01 01:17:07 +11:00
Robert F-C	839bef6d5d	Fix Configuration.h file to not define LCDs be default. Also fix compile time check in Marlin.pde	2013-02-28 02:32:20 +11:00
Robert F-C	1292d735ba	Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575) This includes refactoring the buttons code to remove a large amount of non-pin dependent duplication from pins.h.	2013-02-28 02:04:51 +11:00
MendelMax	67710df9f3	Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004) Removed incorrect LiquidCrystal_I2C Library	2013-02-26 22:22:12 +00:00
Bob Clough	2b567d1df5	Added I2C port expander support to HD44780	2013-02-25 14:22:14 +00:00
Bob Clough	06272f463d	Added Config variables for activating I2C LCDs and setting type and address	2013-02-25 14:14:46 +00:00
Denis B	70871715e4	Added support for extruder offset handling The extruder offset can be specified in the configuration file or adjusted on the fly using the "M218 T# X# Y#" command. The EEPROM support is not yet merged in. The "T#" command can take option "F#" that specifies the feedrate at which the printing head should be re-positioned. If not specified the re-positioning move is not preformed immediately, but the coordinates are adjusted for the printer to properly position the head when the next movement happens.	2013-02-04 23:05:45 -05:00
Daniele Sdei	9ecb267b63	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2013-01-14 15:47:40 +01:00
Daniele Sdei	3cf59f6f9a	add RepRapPro Huxley thermistor tables	2013-01-14 15:36:08 +01:00
daid303	bbe7d3d0fe	Fixed #312	2013-01-08 17:09:57 +01:00
daid303	8b88e3b386	Fixed #345 , Fixed #267 .	2013-01-08 12:14:55 +01:00
Nicolas Rossi	f3c1fc70a9	Power signal control definitions for ATX and others	2013-01-07 14:33:30 +01:00
Erik vd Zalm	6752cb2d9c	PID now per extruder. Fixed typo	2013-01-06 14:26:23 +01:00
Erik vd Zalm	0ac452e252	Disable is now multi extruder compatible. M84 got a T option.	2013-01-06 13:37:01 +01:00
Johann Rocholl	9e7b5056a0	{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.	2012-12-28 16:20:10 -08:00
Johann Rocholl	1c2ecddae4	Fix typo (# missing before define).	2012-12-16 12:33:44 -08:00
Johann Rocholl	3b2e5027e5	Merged updates from Marlin_v1.	2012-12-16 12:19:24 -08:00
daid303	55ba90ac19	Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.	2012-12-12 09:08:37 +01:00
daid303	5ff5cee8ce	Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)	2012-12-11 14:53:53 +01:00
Johann Rocholl	1f45cb0a51	Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.	2012-12-11 01:54:40 -08:00
Johann Rocholl	c430906d3b	Deltabot settings and configuration adjustments.	2012-12-10 00:10:56 -08:00
Johann Rocholl	42e21bb06e	Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).	2012-12-08 10:49:01 -08:00
Erik vd Zalm	f934d0ef5b	Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Configuration.h	2012-11-21 20:36:30 +01:00
Martin Lukasik	2f771b3979	Added automatic build numbering.	2012-11-12 21:06:59 +00:00
daid303	a27fef8750	Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.	2012-11-11 11:06:58 +01:00
daid303	ffc69537aa	Update on some comments, make the MOTHERBOARD list complete again.	2012-11-09 09:10:51 +01:00
Jonathan Bastien-Filiatrault	46b9988e26	Search and replace failure.	2012-11-07 16:09:30 -05:00
Jonathan Bastien-Filiatrault	36b452c7ac	Remove abbrs.	2012-11-07 15:42:18 -05:00
Jonathan Bastien-Filiatrault	3cbaad9288	RepRapDiscount Smart Controller pin definitions.	2012-11-06 20:32:13 -05:00
Robert F-C	65c9a0728f	Set default serial port back to 0.	2012-11-05 22:15:07 +11:00
Robert F-C	ab9d183024	Make serial port configurable. This change makes the choice of serial port configurable so that wireless capability can be easily added by connecting Bluetooth modules (such as BlueSmirf or JY-MCU) to the expansion port pins.	2012-11-05 21:34:27 +11:00
brupje	326423719f	Add support for Megatronics	2012-10-14 14:05:57 +03:00
ErikZalm	36a746d7d5	Merge pull request #244 from markfinn/pidbed PID for heated bed	2012-10-08 11:15:16 -07:00
Mark Finn	04631d2250	cleanup for pull	2012-09-17 14:17:24 -05:00
ZetaPhoenix	c6caa45ae2	Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.	2012-09-15 15:25:49 -07:00
ZetaPhoenix	dc566d654f	fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.	2012-09-14 21:48:49 -07:00
Mark Finn	9698f4ea64	bed pid Conflicts: Marlin/Configuration.h	2012-09-12 21:18:59 -05:00
Erik vd Zalm	e358a2d7af	Added fix for SF Arc Point fillet procedure	2012-09-02 01:12:49 +02:00
tonokip	1c1fddc7ac	Added support for the Rambo reprap electronics board. Added Mcodes to set motor current and microstepping pins.	2012-08-30 00:16:57 -07:00
Erik vd Zalm	5406c533db	Disable FAST_PWM by default. On some systems it does not work ok.	2012-08-11 15:51:04 +02:00
Dabble63	6b45e9f167	Add Duty Cycling to the Heater Bed	2012-08-11 09:17:47 +03:00
Chris Palmer	538189cc19	Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed. Saguinololu limit pins change from MIN to MAX according to the homing direction.	2012-07-14 22:24:26 +02:00
Erik van der Zalm	ea2c19f978	Added CoreXY support (Thanks Ilan Moyer)	2012-07-14 14:21:53 +02:00
Erik van der Zalm	aa65fe22ed	decoupled axes sucessfully at least on pure x or y jog	2012-07-14 13:43:19 +02:00
Bernhard	0c123950e9	__ header file replace	2012-06-02 20:44:17 +02:00
Bernhard	0e5e249ab5	added individual pullup setting option to have finer control in case there is a special z-min sensor, for example	2012-06-02 13:47:50 +02:00
Bernhard Kubicek	6b14f95b3e	Merge pull request #170 from linagee/Marlin_v1 Marlin v1	2012-06-02 03:46:56 -07:00
linagee	fbd282b3ba	Update Marlin/Configuration.h	2012-05-20 13:19:28 -06:00
linagee	c4490f5f3d	Update Marlin/Configuration.h	2012-05-20 04:27:52 -06:00
Daid	7244aa7eb7	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2012-05-19 17:38:46 +02:00
linagee	de2ca3b2e8	Grammar correction.	2012-05-19 07:40:35 -06:00
linagee	c2fc466e1b	Update Marlin/Configuration.h	2012-05-19 05:56:17 -06:00
linagee	9f9f498491	Update Marlin/Configuration.h	2012-05-19 05:47:30 -06:00
Guan Yang	602c8ee02b	Melzi support	2012-05-09 18:37:07 -04:00
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Turning off the protection might be beneficial to those who want to do fast and long reversals.	2012-05-08 17:44:08 +02:00
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	2012-05-02 19:26:14 +02:00
Erik van der Zalm	e3821bd86f	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-04-30 13:36:27 +02:00
Erik van der Zalm	02af69911e	Added temperature window to M109. This is needed for systems with no overshoot PID.	2012-04-30 13:36:19 +02:00
Bernhard	464b755918	added support for the UltiController	2012-04-22 20:55:56 +02:00
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	2012-04-15 19:17:33 +02:00
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	2012-03-25 14:36:51 +02:00
Michel Pollet	aa6e6e914e	Makefile: Redone + Removed most explicit pathnames, use the standard make "VPATH" to let make find the files for itself. + Added a "hardware variant" variable that allows compiging Sanguino and Gen7 as well as "generic" arduino. + Allows overriding the MOTHERBOARD define from the Makefile + Removed the 'preprocessor' bit that wasn't needed, now just "include" the files that are needed, since it allows gcc to show the right file/line when displaying error/warnings. + Uses gcc's own dependency generator to generate the .d files, and and include these instead of self-patching the makefile Signed-off-by: Michel Pollet <buserror@gmail.com>	2012-03-22 13:48:10 +00:00
Erik van der Zalm	2e749d60c3	Added DISABLE_MAX_ENDSTOPS	2012-03-12 20:32:14 +01:00
Erik van der Zalm	910f4e77a2	Added 20MHz support.	2012-03-11 12:25:04 +01:00
Erik van der Zalm	e056bf8081	Added E-Jerk	2012-03-04 16:34:58 +01:00
Phil Hord	b65ef8d66c	Add support for upcoming Gen7 v1.4 V1.4 moves thermistor power to the always-on 5v line. The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer needed on this board. Add a new motherboard type to support this feature.	2012-02-26 20:39:49 -05:00
Erik van der Zalm	97d42ca2b2	SDSUPPORT default disabled	2012-02-26 22:05:38 +01:00
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	2012-02-26 16:23:47 +01:00
Erik van der Zalm	4fbda5c3f5	Merge remote-tracking branch 'daid/Marlin_v1' into Test	2012-02-26 16:10:59 +01:00
Erik van der Zalm	35e57bf149	Added gen6 deluxe.	2012-02-25 17:44:45 +01:00
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. Split ramps1.3 in Sprinter like config and multiextruder config.	2012-02-24 23:34:41 +01:00
Erik van der Zalm	01d28c18ab	Fixed casting warning in sanguino	2012-02-23 18:45:37 +01:00
Blair Thompson	2fd8c248fe	Added Fan control to the pre-heat settings. I find that the PID routine works better when the cooling fan is switched on at the beginning of a warm up routine. Otherwise when you enable the fan just before a print, you have a delay as the PIDre-adjusts. This should also be safer as most cooling fans are directed at the hot -ends thermal barrier!	2012-02-22 23:05:52 +00:00
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	2012-02-22 22:51:04 +00:00
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 Updated the Xsteps ... settings via the LCD menu	2012-02-22 18:07:56 +01:00
Erik van der Zalm	8816ef1c64	Small fixes after merge	2012-02-21 20:36:43 +01:00
Erik van der Zalm	d298dd121f	merged SBUBA82 and Justblair	2012-02-21 20:26:59 +01:00
Blair Thompson	a05a261b72	Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card	2012-02-18 23:56:31 +00:00
Blair Thompson	1b6765ed12	Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface	2012-02-18 18:25:04 +00:00
Christian Thalhammer	e661578c84	support for GEN7 1.1,1.2 and 1.3	2012-02-17 10:46:48 +01:00
Daid	73344e69c1	Added temperature offset/gain settings for AD595.	2012-02-16 11:05:08 +01:00
Christian Thalhammer	d309565b56	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Configuration.h	2012-02-13 13:07:55 +01:00
Christian Thalhammer	0e3631ff4b	smaller changes	2012-02-13 12:31:53 +01:00
Erik van der Zalm	fa2e1be0ca	changed default EXTRUDE_MINTEMP to 170.	2012-02-12 17:38:54 +01:00
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	2012-02-09 20:26:17 +01:00
Erik van der Zalm	9173a5713b	Teensylu support.	2012-02-09 19:27:45 +01:00
Erik van der Zalm	bdb70c0509	Warning for 10k thermistor	2012-02-08 18:38:45 +01:00
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	2012-02-07 20:23:43 +01:00
Erik van der Zalm	f9c5333f97	Made "stop heating wait" optional. Default off.	2012-02-06 20:13:44 +01:00
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	2012-02-06 11:58:52 +01:00
Erik van der Zalm	9f139d6e0e	Added MAX6675 support. (Thanks to gregfrost) Needs some work to remove the blocking in read max6675.	2012-02-05 13:05:07 +01:00
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	2012-02-05 12:42:15 +01:00
Bernhard	212515148e	added m240 photography support. default off	2011-12-22 12:11:39 +01:00
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	2011-12-22 11:45:52 +01:00
Erik van der Zalm	84d9cf7339	merging	2011-12-12 20:35:46 +01:00
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	2011-12-12 19:34:37 +01:00
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	2011-12-11 15:42:56 +01:00
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	2011-12-09 17:07:44 +01:00
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	2011-12-09 15:09:52 +01:00

... 9 10 11 12 13 ...

1106 Commits