3d-gussner
afabfa789d
Update #MSG_MODE c=6
2021-03-30 17:41:09 +02:00
3d-gussner
dc56b74263
Update #MSG_MODE c=9
2021-03-30 17:39:43 +02:00
3d-gussner
2a08a6e441
Update #MSG_SELFTEST_WIRINGERROR c=17
2021-03-30 17:37:50 +02:00
3d-gussner
e6ea843e62
Update #MSG_SELFTEST_MOTOR c=18
2021-03-30 17:36:39 +02:00
3d-gussner
35b000faea
Update MSG_RESUMING_PRINT c=20
2021-03-30 17:34:36 +02:00
3d-gussner
557486ee0b
Update MSG_REFRESH c=18
2021-03-30 17:34:00 +02:00
3d-gussner
54f594238b
Update #MSG_NOZZLE c=12
2021-03-30 17:33:15 +02:00
3d-gussner
a878056be3
Update MSG_BACK c=18
2021-03-30 17:32:04 +02:00
3d-gussner
610ba9bc45
Update #MSG_CARD_MENU c=18
2021-03-30 17:31:18 +02:00
3d-gussner
5eb14dc433
Update #MSG_MAGNETS_COMP c=13
2021-03-30 17:29:56 +02:00
3d-gussner
12372d6525
Update #MSG_Z_PROBE_NR c=14
2021-03-30 17:28:43 +02:00
3d-gussner
7e2c272839
Update #MSG_MESH c=12
2021-03-30 17:27:02 +02:00
3d-gussner
bc8a23a0c6
Update #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
2021-03-30 17:25:35 +02:00
3d-gussner
3367d7f8fa
Update #MSG_SD_CARD c=8
2021-03-30 17:24:45 +02:00
3d-gussner
e8c3ba89dc
Update #MSG_MMU_MODE c=8
2021-03-30 17:23:29 +02:00
3d-gussner
532c7438d8
Update #MSG_NOZZLE_DIAMETER c=10, MSG_GCODE c=8
2021-03-30 17:19:00 +02:00
3d-gussner
0a634f7d48
Update #MSG_FIRMWARE c=8
2021-03-30 17:16:31 +02:00
3d-gussner
39b8a35f3a
Update #MSG_MODEL c=8
2021-03-30 17:15:48 +02:00
3d-gussner
5b843c3a4d
Update #MSG_STRICT c=8
2021-03-30 17:14:49 +02:00
3d-gussner
f60ba6de87
Update #MSG_WARN c=8
2021-03-30 17:13:56 +02:00
3d-gussner
b465c96327
Update #MSG_NONE c=8
2021-03-30 17:13:09 +02:00
D.R.racer
cdcc06f376
SDFile - fix errorneous offset computation
...
... my fault, I was originally too optimistic about the overflow
Fixes #3077
PFW-1233
2021-03-30 11:33:42 +02:00
DRracer
a251dcc14e
Merge pull request #3064 from 3d-gussner/PFW-1222
...
PFW-1222: Disable M120 M121
2021-03-30 10:09:47 +02:00
DRracer
e76b0c40a8
Merge pull request #3066 from espr14/PFW-1223
...
Calibration: detect biased PINDA and retry calibration PFW-1223
2021-03-30 10:08:16 +02:00
3d-gussner
c4f80642b3
Update #MSG_MAIN c=18
2021-03-30 09:52:52 +02:00
3d-gussner
4417deb9ea
Update #MSG_SOUND_BLIND c=7, #MSG_SOUND_LOUD c=7, MSG_SOUND_ONCE c=7
2021-03-30 09:50:21 +02:00
3d-gussner
e4ed1ffc17
Update #MSG_SOUND c=9
2021-03-30 09:46:20 +02:00
3d-gussner
2ce5d3a840
Update #MSG_RPI_PORT c=13
2021-03-30 09:44:13 +02:00
3d-gussner
2ca8a23e4a
Update #MSG_SORT_ALPHA c=8 #MSG_SORT_TIME c=8
2021-03-30 09:42:53 +02:00
3d-gussner
c85ebb4aa3
Update #MSG_SORT c=7
2021-03-30 09:40:26 +02:00
3d-gussner
440ec49a36
Update #MSG_SETTINGS c=18
2021-03-30 09:38:33 +02:00
3d-gussner
6900c206cd
Define #MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-03-30 09:36:32 +02:00
3d-gussner
12dc48ff1a
Update #MSG_BELTTEST c=18
2021-03-30 09:34:41 +02:00
3d-gussner
b697117654
Update #MSG_SELFTEST c=18
2021-03-30 09:33:49 +02:00
3d-gussner
9bc702ae0a
Update #MSG_SELFTEST_OK c=20
2021-03-30 09:32:27 +02:00
3d-gussner
00fedbb08a
Update MSG_LANGUAGE_SELECT c=18
2021-03-30 09:30:04 +02:00
3d-gussner
164226c739
Define #MSG_RIGHT c=10
2021-03-30 09:29:07 +02:00
3d-gussner
2daf1d9114
Define #MSG_LEFT c=10
2021-03-30 09:26:50 +02:00
3d-gussner
169f8983b6
Define #MSG_ADDITIONAL_SHEETS c=20 r=9
2021-03-30 09:23:35 +02:00
3d-gussner
a82ca3def4
Update #MSG_WATCH c=18
2021-03-30 09:21:50 +02:00
3d-gussner
0139bb5a5e
Update #MSG_CHANGE_SUCCESS c=20
2021-03-30 09:20:57 +02:00
3d-gussner
0e86ab88fd
Update #MSG_FILAMENTCHANGE c=18
2021-03-30 09:20:01 +02:00
3d-gussner
9c0300df66
Update #MSG_HEATING c=20
2021-03-30 09:18:11 +02:00
3d-gussner
280a3c4d3a
Update #MSG_PRUSA3D_HOWTO c=18
2021-03-30 09:16:14 +02:00
3d-gussner
12bd2f1a09
Update #MSG_PRUSA3D c=18
2021-03-30 09:15:21 +02:00
3d-gussner
4e4fb7a59f
Update #MSG_PRUSA3D_FORUM c=18
2021-03-30 09:14:20 +02:00
3d-gussner
10c586b577
Update #MSG_FLOW c=15
2021-03-30 09:13:09 +02:00
3d-gussner
db07d55c29
Define #MSG_MMU_FIX_ISSUE c=20 r=4
2021-03-30 09:11:19 +02:00
3d-gussner
7c9891d85e
Update #MSG_FSENSOR c=12
2021-03-30 09:09:11 +02:00
3d-gussner
7a99f63ffd
Define #MSG_FAIL_STATS c=18
2021-03-30 09:06:59 +02:00
3d-gussner
d427563e2b
Define #MSG_MMU_FAIL_STATS c=18
2021-03-30 09:05:18 +02:00
3d-gussner
1b4241f031
Update #MSG_ERROR c=10
2021-03-30 09:03:38 +02:00
3d-gussner
1b8ca77b0c
Define #MSG_MMU_CUTTING_FIL c=18
2021-03-30 09:01:58 +02:00
3d-gussner
b6031c02a8
Update #MSG_DISABLE_STEPPERS c=18
2021-03-30 08:59:27 +02:00
3d-gussner
69b9acdfc1
Define #MSG_CRASH_RESUME c=20 r=3
2021-03-30 08:57:42 +02:00
3d-gussner
411caddc55
Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-03-30 08:14:46 +02:00
3d-gussner
2d2dc23e81
Define #MSG_CALIBRATING_HOME c=20
2021-03-30 08:12:20 +02:00
3d-gussner
c8af50d344
Define #MSG_COPY_SEL_LANG c=20 r=3
2021-03-30 08:09:08 +02:00
3d-gussner
71638b49fc
Update #MSG_COOLDOWN c=18
2021-03-30 08:05:54 +02:00
3d-gussner
5f9b66a23a
Update #MSG_NOT_COLOR c=19
2021-03-30 08:04:39 +02:00
3d-gussner
02ff05639b
Define MSG_CHECKING_FILE c=17
2021-03-30 08:01:26 +02:00
3d-gussner
f2298b1a46
Update #MSG_SD_REMOVED c=20
2021-03-30 07:57:42 +02:00
3d-gussner
1e2f5c8323
Update #MSG_MENU_CALIBRATION c=18
2021-03-30 07:55:19 +02:00
3d-gussner
3733c42d38
Update #MSG_HOMEYZ_DONE c=20
2021-03-30 07:54:11 +02:00
3d-gussner
79aa6b198d
Update #MSG_HOMEYZ c=18
2021-03-30 07:52:24 +02:00
3d-gussner
fa0382fd3e
Update #MSG_CALIBRATE_BED c=18
2021-03-30 07:50:54 +02:00
3d-gussner
2985c6bd6b
Update #MSG_BED c=13
2021-03-30 07:49:37 +02:00
3d-gussner
7c906dd0b1
Update #MSG_BED_CORRECTION_MENU c=18
2021-03-30 07:44:16 +02:00
3d-gussner
4d464b79f4
Update MSG_BED_HEATING c=20
2021-03-20 17:30:44 +01:00
3d-gussner
3ee23af7b7
Update MSG_BED_DONE c=20
2021-03-20 16:04:52 +01:00
3d-gussner
ba0f2b2501
Update MSG_LOOSE_PULLEY c=20
2021-03-20 07:11:41 +01:00
3d-gussner
3fcc81ebdb
Update MSG_SELFTEST_ENDSTOP c=16
2021-03-20 07:11:07 +01:00
3d-gussner
17df4e1c8d
Update MSG_SELFTEST_ENDSTOPS c=20
2021-03-20 07:10:09 +01:00
3d-gussner
4a6c53daf8
Update MSG_SELFTEST_PLEASECHECK c=20
2021-03-20 07:09:33 +01:00
3d-gussner
b3d3feef4d
Update MSG_SELFTEST_ERROR c=20
2021-03-20 07:08:48 +01:00
3d-gussner
5d167ce813
Update MSG_SELFTEST_NOTCONNECTED c=20
2021-03-20 07:08:20 +01:00
3d-gussner
625604d704
Update MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-03-20 07:07:14 +01:00
3d-gussner
b86ad11b68
Update MSG_SELFTEST_BEDHEATER c=20
2021-03-20 07:06:37 +01:00
3d-gussner
b3b062e4ba
Update MSG_SELFTEST_SWAPPED c=16
2021-03-20 07:05:47 +01:00
3d-gussner
b6684f6114
Update MSG_SELFTEST_AXIS c=16
2021-03-20 07:05:03 +01:00
3d-gussner
bc9f6b6ae6
Update MSG_SELFTEST_AXIS_LENGTH c=20
2021-03-20 07:03:47 +01:00
3d-gussner
83cbfda113
Update MSG_AUTO_HOME c=18
2021-03-20 07:02:43 +01:00
3d-gussner
fe1b4e50be
Update MSG_AMBIENT c=14
2021-03-20 06:59:54 +01:00
3d-gussner
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
3d-gussner
1c965cd988
Update MSG_MEASURED_OFFSET c=20
2021-03-20 06:18:41 +01:00
3d-gussner
92acac453f
Update MSG_MMU_POWER_FAILS c=15
2021-03-20 06:16:11 +01:00
3d-gussner
2a848923ea
Update MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
...
as Dutch translation is longer
2021-03-19 18:50:29 +01:00
3d-gussner
baabc0bd1e
Fix typo "didnt" to "didn't"
2021-03-19 18:49:13 +01:00
3d-gussner
b806c017cb
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:58 +01:00
3d-gussner
542ff58529
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:09 +01:00
3d-gussner
147fddd060
Update MSG_CALIBRATE_BED_RESET c=18
2021-03-19 18:41:01 +01:00
3d-gussner
6300211268
Update MSG_PLACE_STEEL_SHEET c=20 r=5
...
as Italian translation is longer
2021-03-19 18:37:23 +01:00
3d-gussner
79a148bb14
Update #MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
...
as Italian translation is longer
2021-03-19 18:34:39 +01:00
3d-gussner
9e60953d44
Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
...
as French translation is longer
2021-03-19 18:14:03 +01:00
3d-gussner
a09f2c2f2d
Update "G-code sliced for a newer firmware. Continue?"
...
as French translation is longer
2021-03-19 18:12:16 +01:00
3d-gussner
41022d7d60
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
...
as French translation is longer
2021-03-19 18:07:04 +01:00
3d-gussner
813aabab56
Update "Select nozzle preheat temperature which matches your material." c=20 r=6
...
as Spanish translation is longer
2021-03-19 18:03:06 +01:00
3d-gussner
d52a7326be
Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6
...
as German translation is longer
2021-03-19 17:55:03 +01:00
3d-gussner
cc29a9485e
Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c=20 r=9
...
as German translation is longer
2021-03-19 17:52:54 +01:00
3d-gussner
03a13ace5a
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9
...
as French translation is longer
2021-03-19 17:47:35 +01:00
3d-gussner
17c015f5c0
Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5
2021-03-19 17:44:07 +01:00
3d-gussner
ba9e26f444
Update #MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
2021-03-19 17:37:24 +01:00
3d-gussner
1bba2255c1
Update MSG_WAITING_TEMP c=20 r=4
2021-03-19 17:34:15 +01:00
3d-gussner
bab4994b89
Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=2
2021-03-19 16:52:24 +01:00
3d-gussner
6a54196862
Update "Now remove the test print from steel sheet." c=20 r=4
2021-03-19 16:42:21 +01:00
3d-gussner
8cbf0b3318
Update "Crash detected. Resume print?" c=20 r=2
2021-03-19 16:38:53 +01:00
3d-gussner
891861d475
Update "G-code sliced for a different level. Continue?" c= r= values
2021-03-19 16:35:53 +01:00
3d-gussner
f9a92e2277
Update "Y distance from min" c=20
2021-03-19 16:32:13 +01:00
3d-gussner
1f6834204f
Update "Select filament:" c= value
2021-03-19 16:30:04 +01:00
3d-gussner
cbe2a4d301
Update MSG_CHECK_IDLER c=20 r=5
2021-03-19 16:22:05 +01:00
3d-gussner
4dc99d970d
Update "MMU needs user attention." c= r= values
2021-03-19 16:17:26 +01:00
3d-gussner
0928c3d133
Update "Lin. correction" c=18
2021-03-19 16:14:16 +01:00
3d-gussner
ce42f2c2a5
Update MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
2021-03-19 16:11:42 +01:00
3d-gussner
5f9d6a0401
Update "Fail stats" c=18
2021-03-19 16:08:57 +01:00
3d-gussner
878200ecae
Update "Fail stats MMU" c=18
2021-03-19 16:06:54 +01:00
3d-gussner
5cbb5b0e17
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values
2021-03-19 15:53:36 +01:00
3d-gussner
c39b22724d
Update "G-code sliced for a different level. Please re-slice the model again. Print cancelled." c= r= values
2021-03-19 15:51:10 +01:00
3d-gussner
5a36b49cee
Update "Select temperature which matches your material." c= r= values
2021-03-19 15:45:32 +01:00
3d-gussner
41db8eed30
Update "Select nozzle preheat temperature which matches your material." c= r= values
2021-03-19 15:42:17 +01:00
3d-gussner
f319dede23
Update "Please insert filament into the first tube of the MMU, then press the knob to load it." c= r= values
2021-03-19 15:39:57 +01:00
3d-gussner
286c1931a5
Update #MSG_WIZARD_LOAD_FILAMENT c=20 r=5
2021-03-19 15:33:13 +01:00
3d-gussner
6a267e5a9a
Update "Press the knob to resume nozzle temperature." c= r= values
2021-03-19 15:30:13 +01:00
3d-gussner
b001eaec8d
Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c= r= values
2021-03-19 15:24:28 +01:00
3d-gussner
18a58c504d
Update #MSG_BED_HEATING_SAFETY_DISABLED c=20 r=3
2021-03-19 15:21:42 +01:00
3d-gussner
ee8c9227cf
Update #MSG_SELFTEST_FANS c=20
2021-03-19 15:16:23 +01:00
3d-gussner
ba73d14511
Update "Fix the issue and then press button on MMU unit." c= r= values
2021-03-19 15:13:56 +01:00
3d-gussner
0c18ddcb10
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." c= r= values
2021-03-19 15:10:18 +01:00
3d-gussner
89900a5109
Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." c= r= values
2021-03-19 15:07:14 +01:00
3d-gussner
49e8f84916
Update "G-code sliced for a newer firmware. Continue?" c= r= values
2021-03-19 15:02:53 +01:00
3d-gussner
fd7aa82dce
Update MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
2021-03-19 15:00:00 +01:00
3d-gussner
1ed7d8fc4b
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=5
2021-03-19 14:42:17 +01:00
3d-gussner
dbec06086c
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
2021-03-19 14:40:04 +01:00
3d-gussner
37ec18596b
Update #MSG_USERWAIT c= value
2021-03-19 14:29:15 +01:00
3d-gussner
dd4c02aa15
Update "Heating disabled by safety timer." c= r= values
2021-03-19 14:23:46 +01:00
3d-gussner
9a719fd0b9
Update "Calibrating home" c= value
2021-03-19 14:17:30 +01:00
DRracer
8ac1d5b95e
Attempt to workaround the M73 C0|D0 visual issue ( #3067 )
...
Attempt to workaround the M73 C0|D0 visual issue
This is an attempt to enable alternation of time to print finish and time
to color change even in the last minute of time to color change, i.e. be
able to print "0:00C".
The proposed solution leverages the capability of the current FW to read
float values from the C|D parameter. This could have the raw benefit of
being able still to alternate this time on the LCD as "0:00C" (or
"<1min") if the slicer sends a non-zero but <1 time right before the
color change.
Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: 3d-gussner <3d.gussner@gmail.com>
2021-03-19 10:18:28 +01:00
D.R.racer
f31189e5be
Version changed (3.10.0-RC1 build 4078)
2021-03-17 12:30:54 +01:00
espr14
99206884b5
Calibration: detect biased PINDA and retry calibration
...
PFW-1223
2021-03-12 05:04:49 +01:00
3d-gussner
6355458052
Add def M120_M121_ENABLED
to Configuration_adv.h
2021-03-11 15:00:49 +01:00
3d-gussner
832e881955
Disable M120 M121
2021-03-10 17:46:19 +01:00
espr14
eb4cf1a77f
Calibration: return XY back after Z search
...
PFW-1217
2021-03-10 10:27:57 +01:00
awenelo
9b21ebd376
Fix numbering for custum sheet hex values
2021-03-07 12:14:03 -05:00
awenelo
09b3632d43
Final changes + cleanup
2021-03-07 09:44:33 -05:00
awenelo
144fc197a5
Fix index number
2021-03-06 14:20:06 -05:00
awenelo
c777199d34
Simplify sheet numbering
2021-03-06 13:26:28 -05:00
DRracer
6489c6f17f
Merge pull request #3036 from wavexx/remove_is_buffer_empty
...
Remove duplicate function is_buffer_empty()
2021-03-05 08:28:40 +01:00
awenelo
53a3772f09
Add satin sheet
2021-03-04 10:14:29 -05:00
Alex Voinea
f0eedf301d
optiboot: check boot_app_magic as well before early exit
2021-03-03 16:31:55 +02:00
Alex Voinea
c951bea627
Remove unused/broken bootapp code
2021-03-03 16:31:30 +02:00
Alex Voinea
c95d2fcbd7
Use avr-libc wdt library
2021-03-03 16:31:06 +02:00
DRracer
073cbe0339
Merge pull request #3048 from DRracer/bootappflags-bad-addr
...
Fix flashing languages with inline wdr instructions
2021-03-03 13:46:08 +01:00
Alex Voinea
8ced0579d6
Move SerialHead declaration outside of loops
2021-03-03 14:35:37 +02:00
DRracer
c1849f5cc2
Merge pull request #2405 from leptun/MK3_NEW_SD_COMPILATION
...
⚡ ️New SD menu
2021-03-03 11:45:04 +01:00
Alex Voinea
026145b78b
Fix CFM message end pointer
2021-03-03 12:31:14 +02:00
D.R.racer
3922bf2877
Fix flashing languages with inline wdr instructions
...
A fairly mysterious situation happened recently in the MK3 branch.
After merging #3033 (change watchdogReset() into a single inline wdr instruction)
we were unable to flash languages.
Since it looked similarly suspicious like issue #2954 we started investigating deeply.
The problem was in the code as described in the comment in this PR.
2021-03-03 11:19:39 +01:00
3d-gussner
7fa93dfa1b
Fix back from submenu Community made
to Select language
after factory reset
2021-03-01 09:18:47 +01:00
3d-gussner
fbcbba78a3
Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch
2021-03-01 09:04:10 +01:00
DRracer
e9c3becb2c
Merge pull request #2572 from wavexx/fwretract_plan_sync
...
Always sync before manipulating the planner position in FWRETRACT
2021-03-01 08:26:57 +01:00
3d-gussner
6d7d9089f7
Add defines and templates for community languages
...
Add `Community made` submenu to `Select language`
2021-03-01 08:22:43 +01:00
3d-gussner
d0d4298249
Update EEPROM documentation for Service prep
2021-02-28 18:18:06 +01:00
3d-gussner
3e06a17810
Fix LCD output
2021-02-28 18:04:07 +01:00
Alex Voinea
28f21c8630
Fix bubblesort sorting speed. ShellSort is probably broken
2021-02-26 19:17:14 +02:00
Alex Voinea
6e0ecf5cd2
Remove redundant click sound in factory reset (MK3 merge issue)
2021-02-26 18:22:32 +02:00
DRracer
f3c422c40e
Merge pull request #3039 from 3d-gussner/PFW-910
...
Fix issue #3037
2021-02-26 12:07:10 +01:00
Alex Voinea
194438c130
Fix formatting
2021-02-26 09:54:57 +02:00
Alex Voinea
7faffa539a
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-26 09:48:46 +02:00
Alex Voinea
f346125948
Use BubbleSort by default. Disable ShellSort until I fix it
2021-02-26 09:18:59 +02:00
Alex Voinea
225c456ae6
Limit progressbar to LCD_WIDTH
...
for some stupid reason bubbleSort sometimes exceeds the total value :)
2021-02-26 09:18:28 +02:00
Alex Voinea
c63f92ae52
Invert shellSort logic
2021-02-26 08:57:49 +02:00
Alex Voinea
204da1cc3f
Factory reset and check_file progress bar
2021-02-25 21:04:05 +02:00
Alex Voinea
8821439878
Cardreader progressbar code
2021-02-25 20:25:32 +02:00
Alex Voinea
afa7c7ab03
Remove forgotten (?) undef at the end of menu.cpp
2021-02-25 19:29:14 +02:00
Alex Voinea
54b2edbc8c
Update debugging code
2021-02-25 19:26:01 +02:00
Yuri D'Elia
e8f6c9fac9
Exit the _lcd_move* menus when homing/leveling
...
Instead of resetting the encoder status when homing or leveling, simply
exit the move/liveZ menu.
When transitioning from idle->printing, axis move shouldn't be allowed
as it would insert moves during a print. This is always wrong.
The menu must be always dismissed. Instead of checking all places where
the menu could be active, automatically dimiss the menu from within
_lcd_move when homing/MBL is happening. The long-push function and the
settings menu checks if "axis move" is possible, and thus
prevent the user to re-enter the menu already.
When doing the first layer calibration, the _lcd_babystep_z is
automatically brought back after MBL has completed.
Technically we should do the same when entering/exiting the paused state
in _lcd_move. However, it's better to dismiss _any_ menu in
stop_and_save_print_to_ram/restore_print_from_ram_and_continue instead.
To be done later...
2021-02-25 17:33:59 +01:00
Yuri D'Elia
b4f5633bde
Enable "Move axis" and "Disable steppers" only when idle
...
Move axis queues movements, which disrupts a normal print, homing (when
XY is combined) or MBL.
Likewise, "Disable steppers" only makes sense when the printer is fully
idle.
Only allow such actions when the printer is not active and/or in the
paused state.
2021-02-25 17:33:59 +01:00
Yuri D'Elia
14a1a93bc8
Include probing/MBL in the PRINTER_ACTIVE check
...
This prevents to perform disruptive actions during homing or between MBL
probes, which would result in a failure.
2021-02-25 17:33:59 +01:00
Yuri D'Elia
28e9c814fc
Remove code duplication for babystep insertion
2021-02-25 16:44:16 +01:00
Yuri D'Elia
019c818c05
Insert babysteps using CRITICAL_SECTION instead of cli/sei
2021-02-25 16:44:16 +01:00
Yuri D'Elia
f5e419530b
Inhibit LiveZ from the settings menu during mesh bed leveling
2021-02-25 16:44:16 +01:00
Yuri D'Elia
ff4e53d2d1
Prevent babysteps in more unsafe situations through homing_flag
...
Further restrict babystep insertion when the lcd_update is enabled by
toggling homing_flag when probing Z (where Z shouldn't be touched
anyway as it would disrupt the measurement)
Also reset the encoder value during mesh leveling.
2021-02-25 16:44:16 +01:00
Yuri D'Elia
c241adec5f
Ensure babystep_apply|undo always uses the planner
...
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.
The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
2021-02-25 16:44:16 +01:00
DRracer
ffae16bf95
Merge pull request #3033 from DRracer/wdr-inline
...
Make watchdogReset() force_inline
2021-02-25 13:53:34 +01:00
3d-gussner
d9b820690e
Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch
...
fix merge issues
2021-02-25 09:56:23 +01:00
DRracer
7b22895f23
Merge pull request #3032 from DRracer/service-prep2
...
Make a special welcome message for Shipping/Service prep.
2021-02-25 08:51:47 +01:00
DRracer
9ed713ab13
Merge pull request #3015 from 3d-gussner/PFW-1174
...
PFW-1174: Add pause/resume for USB/host prints via LCD menu
2021-02-25 08:50:41 +01:00
3d-gussner
657767f073
Merge branch 'MK3' into MK3_Fix_LCD_stats
...
Fix merge issue
2021-02-24 09:01:30 +01:00
3d-gussner
076613fd97
Show Fil. sensor
in Support::Sensor info only if IR Sensor detected
2021-02-23 15:20:08 +01:00
3d-gussner
08a6a4b25e
Enable Filament sensor action during print even if in Support::Sensor info
2021-02-23 15:19:03 +01:00
D.R.racer
734e497cd0
Move wizard msgs into messages.h/c + add more translation markers
2021-02-23 15:09:19 +01:00
3d-gussner
fdff5d84b2
Move Filament sensors to Support -> Sensor Info
2021-02-23 08:52:40 +01:00
3d-gussner
8d4176a530
Add "Fan check [On|Off]" menu to tune
...
User can en/disable the fan check during print. This is very useful in case of false positive
fan errors to let the user to decide to finish print with "faulty" fan.
2021-02-23 07:24:33 +01:00
3d-gussner
30b60e44d2
|| isPrintPaused
is already in PRINTER_ACTIVE
2021-02-22 18:21:20 +01:00
3d-gussner
fd154e4b69
Again revert Settings
2021-02-22 18:10:43 +01:00
3d-gussner
5894883324
Fix USB/host FAN Error resume
...
Show Settings during Pause also for USB/host prints
2021-02-22 16:37:01 +01:00
3d-gussner
9110ffd4ae
Revert M602
2021-02-22 16:36:21 +01:00
3d-gussner
cbe207eb59
Fix issue #3037
...
`starttime` is only set for SD prints via gcode `M24 and M32`
2021-02-20 13:18:53 +01:00
Yuri D'Elia
461d3f6749
Remove duplicate function is_buffer_empty()
...
Use cmd_buffer_empty() instead
2021-02-19 17:06:00 +01:00
D.R.racer
87f416f303
Keep wizard flag==2 even when a user restarts during Z-calibration
...
i.e. prevent jumping into the standard wizard if reset during Z-
calibration
2021-02-18 15:39:29 +01:00
3d-gussner
495dcee066
Show LCD Settings during pause
2021-02-18 12:09:43 +01:00
3d-gussner
a109d20506
Merge remote-tracking branch 'upstream/MK3' into PFW-1174
...
Fix merge issues
2021-02-18 11:05:31 +01:00
3d-gussner
c1d8e6660b
Indentations
2021-02-18 10:07:40 +01:00
DRracer
adf347fdf1
Merge pull request #3034 from 3d-gussner/MK3_PFW-960
...
PFW-960 Improve M0/M1/M117
2021-02-18 09:59:01 +01:00
3d-gussner
291ee8e46d
Indentations
2021-02-18 09:53:14 +01:00
3d-gussner
75a385d614
Indentations
2021-02-18 09:10:28 +01:00
D.R.racer
4e768057e7
Use standard wdt_reset() from AVR lib
...
which translates to the one `wdr` instruction like before
+ wrap configuration of watchdog into cli/sei
2021-02-17 15:59:52 +01:00
3d-gussner
2b4cf8d56e
Fix FANCHECK build error
2021-02-17 13:52:31 +01:00
D.R.racer
a456c4a52d
Make watchdogReset() force_inline
...
It makes no sense keeping watchdogReset as a separate function which
must be called, since it only contains one instruction: "wdr".
Not only was the code larger by 32 bytes in total, but also much slower
(call+ret take 4 cycles together for no reason in this case).
Surprisingly, doing just this on FW 3.9.3 solves issue #2954 on the one
affected EINSY board, even though it makes not much sense (there must be
some other timing issue).
2021-02-17 13:04:46 +01:00
D.R.racer
c3bea4d71c
Make a special welcome message for shipping/service prep
...
Another request from our Service dept. - the user shall be prevented
from skipping the intro wizard, because otherwise some preset/calibrated
features will look like not done - especially live-z calibration.
And since there are users, who send a machine to service to perform 1st
layer calibration only, they must not omit the Z-calibration at the
start after shipping.
2021-02-17 12:53:56 +01:00
3d-gussner
c79bce010d
Don't show Settings during pause
2021-02-17 12:18:30 +01:00
DRracer
7a84ad71dc
Merge pull request #3023 from DRracer/service-prep
...
Add Service prep. item into Factory reset
2021-02-17 10:43:08 +01:00
D.R.racer
dbb0269bd4
Make indentation consistent with surrounding code in factory_reset()
2021-02-17 08:27:49 +01:00
3d-gussner
afc15b42bb
Indentations
2021-02-17 08:13:32 +01:00
3d-gussner
59c2b7e795
Fix Fan error issues.
2021-02-17 07:42:12 +01:00
3d-gussner
66ea1bdfba
Indentations
2021-02-16 12:31:23 +01:00
3d-gussner
d6c6517fcd
Back to Status after Resuming
2021-02-16 07:27:46 +01:00
3d-gussner
c2637d9430
Documentation Show Main Menu
2021-02-15 18:35:04 +01:00
3d-gussner
c07bcd172a
Fix NO Stop print during MBL
2021-02-15 18:34:08 +01:00
3d-gussner
583993b7e2
Back to "Status" after gcode M0/M1
2021-02-15 15:25:04 +01:00
3d-gussner
25928232e4
Merge remote-tracking branch 'upstream/MK3' into MK3_PFW-960
2021-02-15 13:06:47 +01:00
3d-gussner
9071a9f8fd
Gcode M1
must have a string while M0
it is optional
...
As the `M0/M1` moved to the beginning of the parser
- parser would not be able to "find" `M1nn` command if the query was `M1` instead of `M1 `
- to be able to "stop/halt" without sending a string and display default message use gcode `M0`
- as there are no `M0nn` gcodes the parser can query `M0` without additional space needed as in `M1 `
2021-02-15 12:51:12 +01:00
3d-gussner
fc270a356a
Fix indentations
2021-02-15 12:50:40 +01:00
DRracer
86e117679c
Merge pull request #3011 from 3d-gussner/MK3_translation_0121
...
Fix few translations introduced with #2982
2021-02-15 11:16:54 +01:00
3d-gussner
c95a8e13d7
Fix indentations to 4 spaces per tab
2021-02-12 11:47:02 +01:00
3d-gussner
f810047a5c
Switch between Remaing and Change time every few seconds
...
- If `M73` `R,S,C,D` values set the LCD Info screen clock switchs between Remaining and Change time
- If Remaining time is 0 while Change time is >0 the clock switchs between Change time and actual printing time
- If Change is 0 while Remaining time is >0 the clock shows the Remaining time
- If both are 0 the clock shows the actual printing time
- `M73 C` values are shown in "Normal" mode
- `M73 D` values are shown in "Stealth" mode
- Changing the speed will try to calculate the espected times and show `?` behind `R` or `C`
2021-02-12 11:29:47 +01:00
3d-gussner
d2e60aee90
Use CLOCK_INTERVAL_TIME
2021-02-11 10:45:26 +01:00
3d-gussner
cf982b0d4d
Fix timer issue
...
The remaining time stays for ~5 seconds while the change time stays just for ~1 second
2021-02-11 10:20:06 +01:00
3d-gussner
14b4bf5fa5
Add CLOCK_INTERVAL_TIME and ShortTimer IntervalTimer
2021-02-11 07:47:44 +01:00
3d-gussner
b9a3fa2ddd
fix time at speed
2021-02-11 07:47:44 +01:00
3d-gussner
b13d4b71d4
Add Change time behind existing message
2021-02-11 07:47:44 +01:00
3d-gussner
4998cfb70d
Fix printing time being shown without M73
gcode
...
Adjust estimated times only if speed is changed. Printing time has to stay printing time.
2021-02-11 07:47:43 +01:00
3d-gussner
d063ffb141
Add parameter D
to gcode M73
for silent/stealth mode
2021-02-11 07:47:43 +01:00
3d-gussner
83e791cbbe
Fix temp Build number
2021-02-11 07:47:43 +01:00
3d-gussner
91c767b0f2
Reduce code size
2021-02-11 07:47:43 +01:00
3d-gussner
ae48e7c3ce
indentation
2021-02-11 07:47:43 +01:00
3d-gussner
f4ca6ee59d
Fix typo
2021-02-11 07:47:43 +01:00
3d-gussner
cca90da64b
Include silent mode on time change
...
- depends on difference between print time remaining NORMAL vs SILENT mode
2021-02-11 07:47:43 +01:00
3d-gussner
cb61436093
Add remaining time to change/pause/user interaction to LCD Info screen
...
- Add parameter `C` to gcode `M73`
- LCD Info screen switches to change time if last `M73` gcode contains `C` parameter
- Examples:
- `M73 P5 R120` will display on LCD ` SD 5% 02:00R ` if it is printing at 100% speed
- `M73 P5 R120 C60` will display on LCD ` SD 5% 01:00C ` if it is printing at 100% speed
Slicers can generate "Time to change/pause/user interaction" using `C<mins:0-65535>` parameter to "overwrite" the remaining print time.
To switch between time to change and remaining time just send in intervals `M73` with or without `C` parameter.
2021-02-11 07:47:43 +01:00
Alex Voinea
1c1ff722c0
Move sort_order to stack during ::presort
2021-02-10 18:16:26 +02:00
Alex Voinea
8397dae386
Remove comment
2021-02-10 18:15:18 +02:00
Alex Voinea
b4de57c365
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-10 17:08:28 +02:00
Yuri D'Elia
e010ca8ceb
Fix conflicting extern/inline declarations
...
The functions find_bed_induction_sensor_point_* have conflicting
extern and inline declarations.
These are used outside of the compilation unit only, and thus there's no
point in defining them inline.
This causes a compilation failure at O1 and above, which is strangely
avoided at Os.
2021-02-10 14:50:13 +01:00
Alex Voinea
a95d497289
Remove commented out code and deprecated comments
2021-02-10 13:45:30 +02:00
Alex Voinea
8a068d4d36
Remove redundant position=0 in ::presort
2021-02-10 13:44:39 +02:00
Alex Voinea
b72ce00183
Reduce reserved space on stack for LONG_FILENAME_LENGTH by 1 in presort
...
LONG_FILENAME_LENGTH already includes a +1 for the \0 string termination
2021-02-10 13:43:46 +02:00
D.R.racer
7ad922e87b
Report fname instead of name
...
looks like being omitted in MK3 upstream fixes
2021-02-10 12:38:04 +01:00
D.R.racer
8d39880abf
Fix compilation against latest MK3 branch
2021-02-10 12:23:02 +01:00
DRracer
7aa4595211
Merge branch 'MK3' into thumbnails2
2021-02-10 12:15:57 +01:00
D.R.racer
c1ead75a73
Remove commented debug code
...
the whole PR is ready for review after successfull tests
2021-02-10 11:18:59 +01:00
3d-gussner
8bc46248f6
avoid having the block body twice in the code. Thanks to @DRracer
2021-02-10 11:09:29 +01:00
3d-gussner
e5711ea84f
Indentation to 4 spaces for tabs
2021-02-10 11:03:23 +01:00
Alex Voinea
a830d5b6b7
getfilename_next
2021-02-09 20:31:02 +02:00
Alex Voinea
8d1c5cbb27
Fix position table offset
2021-02-09 20:29:06 +02:00
Alex Voinea
e6ffc99ff5
Fix compiler bug ... again ...
...
:endit: :blobhydraulicpress:
2021-02-09 16:28:13 +02:00
Alex Voinea
d2a7c62b50
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-09 16:17:43 +02:00
DRracer
a47c971c75
Merge pull request #3010 from leptun/MK3_fix_M23
...
Fix M23
2021-02-09 15:06:51 +01:00
Alex Voinea
4fcbf95db6
apply RAII principle on the lsDive recursion limiter
2021-02-09 15:00:46 +02:00
D.R.racer
9ccda4c57f
Optimize code size
...
... looks like I've been able to reduce the code by 80B by using the
clamp999() function. There are other spots this function can be used as
well, I didn't touch those yet.
2021-02-09 09:10:23 +01:00
DRracer
e491b53f48
Merge branch 'MK3' into MK3_Fix_LCD_stats
2021-02-09 08:53:32 +01:00
DRracer
5c3683b4ad
Merge pull request #3022 from 3d-gussner/PFW-1182
...
PFW-1182 Fix too long translations during Load/Unload Filament
2021-02-09 08:24:31 +01:00
DRracer
d5d44d30a7
Merge pull request #2305 from 3d-gussner/MK3-Fix_M120_M121
...
Follow RepRap Wiki G-codes documentation
2021-02-09 07:52:14 +01:00
D.R.racer
3668cdeb30
Add Service prep. item into Factory reset
...
upon request from our Service dept. - it is to do the same stuff like
Shipping prep., but keep the printer's stats intact. Still, this has to
be verified and may undergo some further changes.
2021-02-08 17:27:32 +01:00
D.R.racer
5f49d65546
Farmers' request - allow file sorting menu item
2021-02-08 15:43:08 +01:00
3d-gussner
92db282eca
Merge remote-tracking branch 'upstream/MK3' into PFW-960
2021-02-08 12:48:27 +01:00
3d-gussner
aecbd7ab49
Fix c=aa
location in lang files
...
Fix too long translations in Spanish and Italian
2021-02-08 12:17:41 +01:00
3d-gussner
214695105c
Fix issue #2958
2021-02-08 11:33:46 +01:00
3d-gussner
fb39e7296b
Uniform message Press the knob
2021-02-08 10:58:41 +01:00
Alex Voinea
c739aa9003
M23 full path support.
2021-02-07 21:51:44 +02:00
Alex Voinea
f5cde38a7c
Remove duplicit debug line
2021-02-06 21:06:37 +02:00
Voinea Dragos
77a5082b56
Fix presort_flag duplicate declaration
2021-02-06 17:25:17 +02:00
Voinea Dragos
52f7a71dce
More fixes that were extracted from #2405
2021-02-06 14:59:11 +02:00
Voinea Dragos
f343e6432a
Fix diveSubfolder string termination
2021-02-06 12:55:51 +02:00
DRracer
2dfe21358f
Merge pull request #2838 from wavexx/m204_travel_acceleration
...
Implement M204 T (separate travel acceleration)
2021-02-05 16:27:50 +01:00
DRracer
77eb10000c
Merge pull request #2948 from 3d-gussner/PFW-1168
...
PFW-1168 Move Z up running xyz calibration
2021-02-05 16:18:07 +01:00
Alex Voinea
84d043d41b
Fix WorkDirDepth limit (for good this time)
2021-02-04 17:52:42 +02:00
Alex Voinea
90c0f33bc5
Fix farm filename when LFN is missing
2021-02-04 16:40:15 +02:00
Alex Voinea
080c44cb2e
Undo stupid hack for an error because of some compiler issue in the past
2021-02-04 16:37:24 +02:00
Alex Voinea
df163066fb
Fix "sorting files" messages for both ShellSort and BubbleSort
2021-02-04 15:44:15 +02:00
Alex Voinea
279c0aaa21
Fix double '>' bug and brutal refactoring
2021-02-04 14:21:37 +02:00
Yuri D'Elia
640e8d899b
Don't scroll one character past the filename end
2021-02-04 13:33:20 +02:00
Alex Voinea
8445f76eb9
Restructure for loop to work correctly in reverse
2021-02-04 13:26:15 +02:00
Alex Voinea
3c5c1e5167
Use enum for menu state code readability
2021-02-04 13:19:22 +02:00
Alex Voinea
ffc3a445ca
Remove even more dead code
2021-02-04 11:35:15 +02:00
Alex Voinea
d25b4a6bc9
Remove dead code (SDSORT_GCODE)
2021-02-03 19:18:13 +02:00
Alex Voinea
e52e68d4c1
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-03 18:30:36 +02:00
Alex Voinea
4c977cc335
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-03 18:28:18 +02:00
Yuri D'Elia
186ce0f4b3
Handle acceleration settings in UVLO/power panic
...
Acceleration settings need to be saved in UVLO, since these are often
changed/set during a print. This is especially important for travel and
retract acceleration, which is usually set once per-print.
Saving and restoring is not 100% correct.
We save the current front-end value, which might ahead of the backend
when UVLO is triggered. Print acceleration, likely the most significant,
should be saved in the block buffer to be accurate.
Acceleration needs to be restored after the UVLO Z repositioning is
performed, using an M204 command. This is correct, however we don't save
the _temporary_ max acceleration limits set via M201, which could be
higher than the saved limits (via M500). This could result in lower
clamped values compared to the original print.
Maximum acceleration/jerk/feedrate limits should _all_ be saved in UVLO
in the future.
2021-02-03 11:28:51 +01:00
Yuri D'Elia
f7542aa064
Report travel acceleration in M503
...
Use the new M204 format consistently also in M503's output
2021-02-03 11:20:28 +01:00
Yuri D'Elia
76911f67db
Take advantage of the new is_uninitialized function
...
Save some space and perform some cleanup
2021-02-03 11:20:28 +01:00
Yuri D'Elia
45811f82aa
Initialize default travel_acceleration from EEPROM
...
When reading uninitialized memory, preset the travel acceleration to be
the same as the default acceleration.
2021-02-03 11:20:28 +01:00
Yuri D'Elia
5589954b77
Add DEFAULT_TRAVEL_ACCELERATION in all variants
...
Use the same value as DEFAULT_ACCELERATION for compatibility.
2021-02-03 11:20:28 +01:00
Yuri D'Elia
1c76152e62
Implement separate travel acceleration (M204 T)
...
Allow to separate extrusion and travel acceleration settings using M204,
as Marlin 1.1.x and 2.x does using M204 T.
This allows to reduce the number of instructions required during
printing, since resetting the acceleration for travel moves is no longer
required and can be done a single time during the print.
Provision for this parameter was pre-existing, but not implemented.
M204 has two forms: the lagacy format (Marlin <1.1):
M204 S[print-acc] T[retract-acc]
and the newer format:
M204 P[print-acc] R[retract-acc] T[travel-acc]
The distinction in the MK3 FW is done based on the presence of the P
parameter. If P is seen, the new format is adoped. In the new format
however, M204 T was ignored until this change.
To keep backward compatibility, M204 S[acc] will set both print and
travel acceleration, which is identical in behavior to recent versions
of Marlin.
2021-02-03 11:20:28 +01:00
3d-gussner
2ba24fe0d4
Add pause/resume to USB/host prints via LCD menu
...
Depending if SD or USB/host print the firmware sends
- SD print: `// action:paused` or `// action:resumed` are send to inform USB/Host
- USB/host print: `// action:pause` or `// action:resume` are send to trigger the USB/host to handle it
- USB/host must handle `// action:pause` and `// action:resume` correctly to work
- Tested with Octoprint
- It handles every thing correctly
- Any combination of Octoprint and/or LCD `pause` and `resume` working correctly
- Tested with Pronterface
- It pauses BUT doesn't send the printer in pause position, and so it is not possible to `resume` from LCD menu
- I guess some Macros can fix that.
- Repetier Host/Server documentation shows that it should work. Not tested.
Could save 56 bytes in first step and additional 38 bytes adding `MSG_PAUSE_PRINT` to messages.c/.h
Updated `lang_en*.txt`
@todo Polish translation is 19 characters long (it still fits) BUT should be corrected to 18 chars.
2021-02-03 11:00:26 +01:00
Alex Voinea
896f4e1dd1
Fix compile error
2021-02-02 19:14:05 +02:00
Alex Voinea
f6ae379077
Fix dir_names array definition. Prevents overrun
2021-02-02 19:08:44 +02:00
Alex Voinea
5c9d202871
Change MAX_DIR_DEPTH from 10 to 6
...
You can't run M23 with so many directories as the length of the command will exceed the maximum allowed by cmdqueue
2021-02-02 19:08:19 +02:00
3d-gussner
57e730c80c
Merge remote-tracking branch 'vojtech-pavlik/MK3' into MK3_Test_PRs
...
Fix merge issues PR1900
2021-02-02 13:49:34 +01:00
Alex Voinea
647cde0cae
Add documentation
2021-02-02 13:38:20 +02:00
Alex Voinea
2f4119a6d7
M552 - Printer IP address
2021-02-02 13:21:16 +02:00
DRracer
2b81abb24c
Merge pull request #2814 from wavexx/MK3_PAT9125_I2C
...
Use hardware TWI for the PAT9125 (optical) filament sensor
2021-02-02 09:15:35 +01:00
D.R.racer
15d76a7501
Remove duplicit incrementation of consecutive comment lines
...
It was left in the code in one of the refactoring/optimization passes.
It really didn't do any harm, but was limiting the performance of the
skipping algorithm.
+ some verification code added - will be removed after successful tests
2021-02-02 07:57:06 +01:00