3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,442 Commits 3 Branches 78 Tags 40 MiB
4a02ff3de8
Commit Graph

4238 Commits

Author SHA1 Message Date
Yuri D'Elia
e7f78125d3 Merge remote-tracking branch 'panayiotis/FixEepromAddressDocumentation' into improve_d2 2021-06-08 16:18:09 +02:00
Yuri D'Elia
30402e0404 Dcodes: add D20/D21/D22 to generate/read/clear dumps 2021-06-08 15:34:39 +02:00
Yuri D'Elia
6dfef76346 xfdump: implement dump-to-xflash functionality 
Update xflash_layout to include information about the dump, which sits
at the end of xflash.
 2021-06-08 15:28:02 +02:00
Yuri D'Elia
b398a09a4f xflash: add xflash_multipage_program and documentation 
Add a new high-level command to perform multipage writes quickly.
 2021-06-08 15:25:16 +02:00
Yuri D'Elia
86e753fe37 xflash: remove some duplication 2021-06-08 15:24:46 +02:00
Yuri D'Elia
5ae8bad0ba Introduce "xflash_layout" to organize XFLASH's content 
Update the language code to use the new LANG_OFFSET definition
and remove hard-coded flash sizes.
 2021-06-08 15:22:37 +02:00
Yuri D'Elia
af636c7f2a Move "xflash" include inside the conditional 2021-06-08 15:18:33 +02:00
Yuri D'Elia
0fcdada579 D6: add documentation 2021-06-07 19:58:18 +02:00
Yuri D'Elia
ed9f52dd85 D6: also hide declaration behind conditional 2021-06-07 18:50:45 +02:00
Yuri D'Elia
db096557d4 D[236]: remove "busy" messages while dumping, avoid WDT 2021-06-07 16:41:25 +02:00
Yuri D'Elia
12e124324f Remove PROGMEM handling from print_mem until D5 uses dcode_core 
Handling PROGMEM also requires a 32bit address type.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia
f9371146d0 Implement reading XFLASH with D6 
This requires expanding the dcode_core address type to 32bit type,
thus enlarges the D2/D3 implementation as a result.

Still allow to save all the original space if D6 is disabled, for now.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia
915f5a7692 Unify D2 and D3 handling 
Handle reading/writing memory using the same base functions
in order to save space.
 2021-06-07 16:41:25 +02:00
Yuri D'Elia
2d25a5705f Fix D2 to read the entire SRAM content 
Allow to read up to 0x21ff, which is the last byte of SRAM.  Set default
starting address to 0x200, which is the first true byte.

0x0-200 is mapped to register/io space and could cause issues when read
from bi-directional registers.
 2021-06-07 16:37:34 +02:00
Yuri D'Elia
62f496e1d6 Allow D2 to be enabled selectively 2021-06-07 16:37:34 +02:00
D.R.racer
6bb7c0e3d3 Farm workaround M1 message 
Farmers want to abuse a bug from the previous firmware releases
- they need to see the filename on the status screen instead of "Wait for user..."
So we won't update the message in farm mode...
 2021-05-25 09:45:42 +02:00
Panayiotis-git
3c63ddaafd Fix the eeprom address documentation 2021-05-22 17:09:55 +03:00
D.R.racer
04de9c0c8a Version changed (3.10.0 build 4481) 2021-05-06 13:46:05 +02:00
Yuri D'Elia
1a92f2e19f Merge remote-tracking branch 'upstream/MK3_3.10.0' into fix_partial_redraw2 2021-05-04 10:49:24 +02:00
DRracer
eaa6801849
Merge pull request #3136 from leptun/PFW-1225_fix_open_file_from_sd_wrong_file 
Fix menu_action_sdfile() check_file(filename) call
 2021-04-29 16:34:01 +02:00
DRracer
80e248662c
Merge pull request #3079 from 3d-gussner/PFW-1189 
PFW-1189 Pre-release tasks
 2021-04-29 16:33:18 +02:00
DRracer
89386036e6
Merge pull request #3137 from leptun/PFW-1239_fix_M23_subroutine_issue 
Do not allow M23 to run subroutines
 2021-04-29 15:06:33 +02:00
DRracer
a3b392d96c
Merge pull request #3130 from DRracer/move-alldata-2-end 
Move All Data into last position in Factory Reset menu
 2021-04-29 10:08:32 +02:00
Voinea Dragos
8610d0a850 Do not allow M23 to run subroutines 2021-04-29 10:59:21 +03:00
DRracer
7c914ec2d1
Merge pull request #3125 from leptun/PFW-1238_fix_M105_from_SD 
Fix M105 from SD
 2021-04-29 09:12:05 +02:00
Voinea Dragos
1a70f3369d fix comment 2021-04-29 09:48:25 +03:00
Voinea Dragos
d9976ca69c Fix menu_action_sdfile() check_file(filename) call 2021-04-29 09:47:16 +03:00
3d-gussner
a9ae8ea731 Remove SpoolJoin from translations 2021-04-29 08:15:24 +02:00
3d-gussner
488d9d4b38 Remove "Firmware" from translations 
deleted another unused "Firmware" define in language.h
 2021-04-28 18:02:36 +02:00
3d-gussner
d251f3980a Remove FlashAir from translations 2021-04-28 17:57:39 +02:00
3d-gussner
b5ba4041d3 Remove FINDA from translations 2021-04-28 17:36:17 +02:00
3d-gussner
08566d4121 Remove PINDA from translations 2021-04-28 17:33:52 +02:00
3d-gussner
30b383195d Remove copy/paste error 2021-04-28 17:29:32 +02:00
Yuri D'Elia
aee04a43e2 Redraw "Preheating to load" in full when modified by other actions 
Check for lcd_draw_update to see if the lcd has been altered outside the
function and redraw the screen if full.

This fixes scenarios such as #3129 where the "Card removed" message or
the SD menu is entered from outside the function's control.

This requires checking/resetting bFilamentWaitingFlag carefully to avoid
re-entering this function _twice_ (raise_z_above will run the main
loop until complete).
 2021-04-28 17:13:46 +02:00
D.R.racer
5089b2cddb Move All Data into last position in Factory Reset menu 2021-04-28 06:43:54 +02:00
3d-gussner
7a54c3638c Remove web links and Prusa i3 MKxy OK. from translations 
as these never have been translated or doesn't make sense
to translate web links
 2021-04-27 20:36:22 +02:00
3d-gussner
686054b95e Changed x of 4 and y of 9 to x/4 and y/4 
Added `Iteration` translation
 2021-04-27 20:22:28 +02:00
3d-gussner
738a24178a Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3 2021-04-27 07:45:36 +02:00
3d-gussner
b8ae08fd3d Update x of 4 and x of 9 messages so longer text can be used. 2021-04-27 07:18:52 +02:00
3d-gussner
1145b231a9 Define MSG_SELFTEST_FS_LEVEL 2021-04-26 14:30:20 +02:00
3d-gussner
af519626aa Define MSG_FS_V_04_OR_NEWER and MSG_FS_V_03_OR_OLDER c=14 2021-04-26 14:21:33 +02:00
3d-gussner
b522ef4812 Update MSG_SEVER_SKEW and MSG_SLIGHT_SKEW message to c=14 
Changed and tested Support-> "XYZ cal. details" LCD output
 2021-04-26 12:39:13 +02:00
3d-gussner
536a8f5f87
Revert that has been commited by mistake 2021-04-26 07:28:03 +02:00
3d-gussner
466de83ae0 Remove white spaces in messags which saves ~62bytes 2021-04-26 07:22:22 +02:00
3d-gussner
29ad021b23 Updated French translation of MSG_MMU_LOAD_FAILED c=20 as @awenelo suggested 2021-04-24 20:50:01 +02:00
3d-gussner
9f77ca31b8 Set MSG_SET_TEMPERATURE chars to c=20 
Fix Italian warning shown by `lang-check.py`
 2021-04-24 08:19:48 +02:00
Marek Bel
aa45091400
Scale extruder motor current linearly with speed. (#2813) 
Scale extruder motor current linearly with speed.

49% less heating when running at low speed and standstill, 4% more torque at maximum extrusion rate (15mm^3/s), 15% more torque in high speed movements (un/retractions).

StealthChop mode is used for low speeds (below 900mm/min)
spreadCycle is used above. Transition speed is well above maximum extrusion rate of 15mm^3/s (275mm/min) so mode transition is not expected to be visible on printed surface.

StealthChop is expected to improve printed surface quality (less artifacts).

Warning you can burn extruder motor if it is not the same impedance as original Prusa i3 Extruder stepper motor. There is no current feedback in low speed so lower impedance motor can be burned by over current.

Even there is no direct current feedback, there is no risk for original motor thermal runaway, as motor resistance increases with temperature, current decreases.

Standstill peak phase current is expected to be 500 mA and linearly increase with speed to 970 mA at 900mm/min where spreadCycle constant current regulation takes over and keeps peak current at 805 mA to maximum speed possible.

As motor heating increases with current squared, lowering low speed current from 700mA to 500mA decreases heating 49% in thate mode, where motor spends most of the time.

Enable E-motor cool mode in farm mode only (and experimental menu) - the experimental menu is visible AND the EEPROM_ECOOL variable has a value of the universal answer to all problems of the universe - i.e. two conditions must be met at the start of the FW to enable the E-cool mode. If the user enables the experimental menu, sets the E-cool mode and disables the menu afterwards, on the next start of the FW the E-cool mode will be DISABLED. This is still subject to discussion how much obscure (security through obscurity) we'd like this option to have .

Additional stuff:
* Add serial debug msg to verify if E-cool mode is on
* Avoid access to E-cool mode switch on machines without TMC2130
* Do not allow only M907 E in case of E-cool mode+warn the user on the serial line that the command was skipped

Co-authored-by: D.R.racer <drracer@drracer.eu>
 2021-04-23 16:06:28 +02:00
3d-gussner
c2cde83d7e Fix MSG_SELFTEST_WIRINGERROR to c=18 2021-04-23 13:29:45 +02:00
3d-gussner
3f51627c02 Fix MSG_NO being too short, no need to be 2021-04-23 13:23:11 +02:00
3d-gussner
013708479f Fix MSG_UNLOAD_FILAMENT length as in MMU a number is added 2021-04-23 13:12:57 +02:00
3d-gussner
032e8a5957 @leptun strip 1st char hack for duplicate Cancel 2021-04-23 13:03:59 +02:00
3d-gussner
403b340f19 Added EXTENDED_M20 to RepRap Gcode wiki M115 see https://reprap.org/mediawiki/index.php?title=G-code&type=revision&diff=189034&oldid=189033 2021-04-23 11:02:42 +02:00
Voinea Dragos
635bc442d6 Fix M105 from SD 2021-04-23 11:14:16 +03:00
3d-gussner
28aec049a2 Fix Typo in MSG_FIL_FAILED 2021-04-23 09:41:12 +02:00
3d-gussner
ff9185d1bb Readded >Cancel as the > has some meaning. Sadly the previously 10bytes more free space are gone again 2021-04-23 08:50:50 +02:00
3d-gussner
044c0a0a6a Update "\04Refresh" message as two "abcd" "efgh" in one line cause issues in lang-build scripts 2021-04-23 08:49:22 +02:00
3d-gussner
e18d688b64 Fix merge issues 2021-04-22 20:48:26 +02:00
3d-gussner
681bc560c9 Merge remote-tracking branch 'upstream/MK3_3.10.0' into PFW-1189 2021-04-22 20:43:54 +02:00
DRracer
999b93be35
Merge pull request #3123 from prusa3d/MK3_3.10.0 
MK3 3.10.0
 2021-04-22 12:53:26 +02:00
DRracer
00ce16ee55
Merge pull request #3121 from wavexx/reduce_m600_min_height 
Revert/cleanup mininum extruder height during M600
 2021-04-22 11:43:18 +02:00
DRracer
1e0fd8af87
Merge pull request #3120 from wavexx/fix_lcd_redraw_autoload 
Fix partial redraw during filament autoload
 2021-04-22 10:36:40 +02:00
DRracer
98643825dc
Merge pull request #3055 from awenelo/add-satin-sheet 
Add satin sheets
 2021-04-22 07:13:32 +02:00
Yuri D'Elia
daef5428d2 Rework gcode_M600_filament_change_z_shift to make it consistent 
gcode_M600_filament_change_z_shift is almost useless, since it performs
what is already been done internally by filament_unload().

However it *does* cause the carriage to raise earlier during unload
compared to making the user wait after "press for unload".

Change it so the calculated Z height matches MIN_Z_FOR_SWAP.
 2021-04-21 19:12:26 +02:00
Yuri D'Elia
8d04316497 Revert/cleanup mininum extruder height during M600 
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.

We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).

A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
 2021-04-21 19:07:58 +02:00
Yuri D'Elia
bc355674d9 Fix partial redraw during filament autoload 
If the printer was already being pre-heated but didn't reach the target
temperature yet and a new filament is being inserted, the LCD used to
display a "Preheating to load" message to block the loading until the
extruder is hot.

This message is currently missing, and the ">Cancel" option doesn't
display immediately either, depending on the extruder height.

This PR fixes this behavior, which was broken during an earlier update.

We now force-update LCD updates during the first (and _only_) time the
screen is setup, and push all messages _before_ the carriage is
eventually raised, so that ">Cancel" is shown immediately as well.
 2021-04-21 16:56:16 +02:00
Alex Voinea
7d82cab125
Update doxygen 2021-04-20 09:16:56 +03:00
Alex Voinea
c4b70b82f3
Document M20 T parameter 2021-04-20 09:13:38 +03:00
Alex Voinea
1c0383c48f
Add capability report for extended M20 2021-04-20 09:03:22 +03:00
D.R.racer
7011014abb Save 16 bytes - pass ls_param by value to functions 
... as ls_param is a 1-byte structure it is more conservative to pass it
to functions by value than by a pointer
 2021-04-20 06:50:37 +02:00
Voinea Dragos
2129bcf315 M20 T 2021-04-19 14:48:50 +03:00
Voinea Dragos
b16e1e5235 Invert size and LFN in M20 L output 2021-04-19 13:54:43 +03:00
Voinea Dragos
6d7d8c7c75 Do not show hidden/system dirs with M20 L 2021-04-19 13:31:30 +03:00
Yuri D'Elia
a5e4df390d Sync before/after setting mesh_bed_leveling_flag/homing_flag 
mesh_bed_leveling_flag and homing_flag should be set only when the
planner is empty as a consequence of #3100, since any operation executed
*while* the mbl/homing flag is set is considered part of the compound
instruction that generated it (G80, G28, G30, G76).

Failure in doing so can result in instructions just prior being lost,
since they're incorrectly discarded (assumed to be redone).

G1  ; lost ..
G80 ; .. if PP happens here
 2021-04-19 06:31:57 +02:00
Yuri D'Elia
23c75da727 Fix Crash/PP recovery position on instructions with comments 
PR #2967 altered the way ``sdpos_atomic`` was set, causing issues in the
crashdetect/powerpanic recovery offset if the instruction being
recovered happens to contain a comment.

Previously ``sdpos`` was assumed to be a single byte prior to the last
read character. sdpos+1 would thus position the index to the next
instruction. With gcode-filtering in place, sdpos is left just before
the comment, while the actual read position is at the newline. This
causes to parser to resume in the middle of the comment.

Change the value returned by cardreader::get_sdpos() to always return
the last read position, as everybody expects (!!).

This avoids the +1, and correctly sets the resume position to the next
valid instruction without overhead.
 2021-04-19 06:30:37 +02:00
D.R.racer
c43688a549 Version changed (3.10.0-RC2 build 4104) 2021-04-16 13:52:36 +02:00
DESKTOP-AFI832L\admin
5a91e1de4d Calibration: fix checking of scan of calibration points 
PFW-1223
 2021-04-14 06:25:18 +02:00
Voinea Dragos
7356cd0811 EEPROM_JOB_ID 2021-04-09 08:09:51 +02:00
DRracer
f9f6284c50
Merge pull request #3100 from wavexx/powerpanic_state_fixes 
Fix PowerPanic and Crash Detection during homing and bed leveling
 2021-04-07 18:19:50 +02:00
Yuri D'Elia
61faa49cbb Fix buffer overflow in buf 
Fix cmd overflow introduced in 186ce0f.

With a precision of %f being .6 and assuming a maximum (theoretical)
acceleration of 99999 we need 47 bytes including terminating byte.

Round it to 48
 2021-04-07 15:57:50 +02:00
Alex Voinea
d31601dcb8 Use correct mfrid for gd25q20c 2021-04-06 10:16:47 +02:00
Alex Voinea
94c1e65d83 Fix MK2.x builds 2021-04-06 10:16:47 +02:00
Alex Voinea
56948157d0 GD25Q40C xflash support 2021-04-06 10:16:47 +02:00
Alex Voinea
07bf4bbe48 Fix gd25120c rd_uid command 2021-04-06 10:16:47 +02:00
Alex Voinea
9454f9d8ec Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
Yuri D'Elia
449d181971 G80: handle power panic 
This is handled in the same way crash detection is handled: homing/mbl
invalidates saved_target _and_ current position.

Fixes PP recovery during MBL and homing.
 2021-04-06 02:20:00 +02:00
Yuri D'Elia
b46a52ffa8 G80: Handle crash detection 
At a higher level, crash detection will repeat the last gcode command.

Some commands such as G28 or G80 need to be repeated in full and require
special handling.

In such cases, do not store the saved target coordinate (which is fake
in such cases) and invalidate the saved position.

This fixes the last coordinate of the first G1 move after recovery.

We also avoid moving from the origin when the saved position is
invalidated, which is not strictly necessary, but saves some time.
 2021-04-06 02:00:47 +02:00
Yuri D'Elia
a5530593fa G80: preserve lcd status and message when aborting 
Restore the old status just before returning, so that the subsequent G80
can restore the first (initial) message correctly.
 2021-04-06 00:31:56 +02:00
Yuri D'Elia
5923276a86 G80: correctly abort during crash detection 
Crash detection is handled at a higher level (which automatically
repeats the current command), however we still need to abort the current
command correctly.

Handle XY crashes by checking the planner status after st_synchronize().
 2021-04-06 00:31:29 +02:00
Yuri D'Elia
5da39df968 G80: Use consistent XY axis feedrate 2021-04-06 00:10:33 +02:00
Yuri D'Elia
ce2e35d14d Move G80 into it's own function 
No actual changes done in the function in this, besides break->return.

In G28, simply call the new function instead of using goto, making the
code more readable.

Also remove the senseless comments in G28 about command queuing (dating
back to when G80 was queued instead of being executed).
 2021-04-05 23:35:17 +02:00
Yuri D'Elia
d2be40491b PP recovery: clamp initial position to software endstops 
As done when initializing the printer from a cold start, we need to
clamp the starting position to software endstops before setting the
planner position since 0,0 is frequently out-of-bounds.

This avoids an useless move during recovery that can cause a crash:

- Initial X is set to be 0
- G1 performed by homing will clamp X>=0, resulting in a positive shift
- If X is already at max X (extruder being parked due to PP), this will
  slam at X+, causing an immediate crash.
 2021-04-05 22:11:06 +02:00
Yuri D'Elia
3276320a06 Hide tmc2130_sg_change behind DEBUG_CRASHDET_COUNTERS 
tmc2130_sg_change is only used for debugging purposes.
Hide definition and usage behind the required define.
 2021-04-05 20:07:03 +02:00
Yuri D'Elia
6a61c26955 Removed unused crashdet_stop_and_save_print2 2021-04-05 20:04:50 +02:00
3d-gussner
b74e1d6062 Update RepRap url for M123 2021-04-01 19:48:14 +02:00
3d-gussner
e12c1dde5c Updated RepRap Wiki and removed the @todos 2021-04-01 19:06:31 +02:00
3d-gussner
3b431bcbc1 Fix output "Y distance from min" by removing ":" so translations can use 20 chars 2021-03-31 08:54:16 +02:00
3d-gussner
d864a5cfdb Define #MSG_PRINTER_IP c=18 2021-03-31 08:46:17 +02:00
3d-gussner
9922774fa7 Cleanup some comments ////c= 2021-03-31 08:11:19 +02:00
3d-gussner
8e74cbce58 Remove r=1 and some minor fixes 2021-03-31 08:07:42 +02:00
3d-gussner
fb691b44b4 Update #MSG_INFO_SENSORS c=18 2021-03-31 07:51:22 +02:00
3d-gussner
3fb90be46f Define #MSG_SELECT c=18 2021-03-31 07:50:18 +02:00
3d-gussner
9a0e67c1d7 Define #MSG_RENAME c=18 2021-03-31 07:43:48 +02:00
3d-gussner
15919a0f09 Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9 2021-03-31 07:41:21 +02:00
3d-gussner
cdfc40fb62 Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3 2021-03-31 07:38:41 +02:00
3d-gussner
c0869efc76 Define #MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4, #MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4 2021-03-31 07:36:26 +02:00
3d-gussner
268d4020cf Define #MSG_FINDA c=5 and update #MSG_PINDA c=5 2021-03-31 07:32:43 +02:00
3d-gussner
c0b8eef6cd Define #MSG_FALSE_TRIGGERING c=20 2021-03-31 07:29:42 +02:00
3d-gussner
1ca443f1f4 Define #MSG_CHECKS c=18 2021-03-31 07:28:18 +02:00
3d-gussner
5e049283be Define #MSG_UNKNOWN c=13 2021-03-31 07:24:41 +02:00
3d-gussner
982153fee1 Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19 2021-03-31 07:16:36 +02:00
3d-gussner
7a88ce89e4 Update MSG_TEMPERATURE c=18 2021-03-31 07:11:01 +02:00
3d-gussner
c0df79d39a Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4 2021-03-31 07:10:03 +02:00
3d-gussner
7268f6a824 Define #MSG_SELECT_FILAMENT c=20 2021-03-31 07:08:09 +02:00
3d-gussner
2e43234d3f Update #MSG_SUPPORT c=18 2021-03-31 07:06:46 +02:00
3d-gussner
ba38262109 Update #MSG_STATISTICS c=18 2021-03-31 07:05:28 +02:00
3d-gussner
960ebac02d Update #MSG_SPEED c=15 2021-03-31 07:04:47 +02:00
3d-gussner
b52d87e9a5 Define #MSG_Z-LEVELING_ENFORCED c=20 r=4 2021-03-31 07:02:42 +02:00
3d-gussner
acbdc2ac8d Define #MSG_RUNOUTS c=7 2021-03-31 06:59:16 +02:00
3d-gussner
09f4850a8a Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13 2021-03-31 06:53:04 +02:00
3d-gussner
4749dd1750 Define #MSG_CHECK_IR_CONNECTION c=20 r=4 2021-03-31 06:46:43 +02:00
3d-gussner
bd8ab39b39 Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4 2021-03-31 06:45:33 +02:00
3d-gussner
5280a89fba Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6 2021-03-31 06:43:21 +02:00
3d-gussner
0d48a32e87 Define #MSG_RESUME_NOZZLE_TEMP c=20 r=4 2021-03-31 06:41:17 +02:00
3d-gussner
4f394c8c5a Update #MSG_TUNE c=18, #MSG_PREHEAT c=18 2021-03-31 06:38:50 +02:00
3d-gussner
fbecae1707 Update MSG_PREHEAT c=18 2021-03-31 06:38:06 +02:00
3d-gussner
ac810bf03a Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3 2021-03-31 06:36:28 +02:00
3d-gussner
00b100bf26 Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10 2021-03-31 06:30:00 +02:00
3d-gussner
baf231b0f1 Update MSG_NO_CARD c=18 2021-03-31 06:23:18 +02:00
3d-gussner
1c09e8411d Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes 2021-03-30 19:30:26 +02:00
3d-gussner
6a266d497b Define #MSG_REMOVE_TEST_PRINT c=20 r=4 2021-03-30 19:19:43 +02:00
3d-gussner
5fcc731be1 Define #MSG_INSERT_FIL c=20 r=6 2021-03-30 19:17:48 +02:00
3d-gussner
243fa68745 Define #MSG_LIN_CORRECTION c=18 2021-03-30 19:16:11 +02:00
3d-gussner
44f7be134d Define #MSG_FS_VERIFIED c=20 r=3 2021-03-30 19:13:31 +02:00
3d-gussner
bcdaecb46d Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20 2021-03-30 19:10:56 +02:00
3d-gussner
de9697b913 Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20 2021-03-30 19:06:46 +02:00
3d-gussner
d601355d40 Define #MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5, #MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8 2021-03-30 19:01:24 +02:00
3d-gussner
669ab0f7f7 Define #MSG_GCODE_DIFF_CONTINUE c=20 r=4, #MSG_GCODE_DIFF_CANCELLED c=20 r=7 2021-03-30 18:58:04 +02:00
3d-gussner
e9750a7312 Update #MSG_FIL_FAILD c=20 r=5 2021-03-30 18:52:58 +02:00
3d-gussner
4a5d7bc6b7 Define #MSG_Y_DIST_FROM_MIN c=20 2021-03-30 18:51:04 +02:00
3d-gussner
2abdfeb4c5 Update #MSG_YES c=3 2021-03-30 18:48:14 +02:00
3d-gussner
7f3fe6740b Update #MSG_NO_MOVE c=20 2021-03-30 18:46:56 +02:00
3d-gussner
1a1a1d88a7 Update MSG_MOVE_X/Y/Z c=18 2021-03-30 18:13:49 +02:00
3d-gussner
c1f22a5239 Update #MSG_MOVE_AXIS c=18 2021-03-30 18:12:03 +02:00
3d-gussner
99893d5066 Define #MSG_MMU_CONNECTED c=18 2021-03-30 18:11:22 +02:00
3d-gussner
77a7a92a42 Define MSG_MMU_LOAD_FAILED c=20 2021-03-30 18:08:13 +02:00
3d-gussner
4d9dffb042 Define #MSG_MEASURED_SKEW c=13 2021-03-30 18:06:43 +02:00
3d-gussner
1e2dde9a52 Update #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3 2021-03-30 18:02:27 +02:00
3d-gussner
afb7c82e26 Update #MSG_LOAD_TO_NOZZLE c=18 2021-03-30 18:00:20 +02:00
3d-gussner
2408bc9f2e Update MSG_LOADING_COLOR c=20 2021-03-30 17:58:51 +02:00
3d-gussner
62ecbb3ae3 Update #MSG_BABYSTEP_Z c=18 2021-03-30 17:57:50 +02:00
3d-gussner
50e69fcca8 Update #MSG_NO c=3 2021-03-30 17:53:58 +02:00
3d-gussner
75c0de741b Update #MSG_AUTO_DEPLETE c=13 2021-03-30 17:52:59 +02:00
3d-gussner
ddf47a3cac Update #MSG_NA c=3, #MSG_OFF c=3, #MSG_ON c=3 2021-03-30 17:51:31 +02:00
3d-gussner
d1813890a8 Update #MSG_STOPPED c=20 2021-03-30 17:49:02 +02:00
3d-gussner
a9ed513979 Update #MSG_STOP_PRINT c=18 2021-03-30 17:48:06 +02:00
3d-gussner
46367c2a33 Update #MSG_STEALTH c=7, #MSG_SILENT c=7, #MSG_NORMAL c=7 2021-03-30 17:46:37 +02:00
3d-gussner
3d848328ed Update #MSG_AUTO_POWER c=10 2021-03-30 17:42:33 +02:00
3d-gussner
8771519880 Update #MSG_HIGH_POWER c=10 2021-03-30 17:41:51 +02:00
3d-gussner
afabfa789d Update #MSG_MODE c=6 2021-03-30 17:41:09 +02:00
3d-gussner
dc56b74263 Update #MSG_MODE c=9 2021-03-30 17:39:43 +02:00
3d-gussner
2a08a6e441 Update #MSG_SELFTEST_WIRINGERROR c=17 2021-03-30 17:37:50 +02:00
3d-gussner
e6ea843e62 Update #MSG_SELFTEST_MOTOR c=18 2021-03-30 17:36:39 +02:00
3d-gussner
35b000faea Update MSG_RESUMING_PRINT c=20 2021-03-30 17:34:36 +02:00
3d-gussner
557486ee0b Update MSG_REFRESH c=18 2021-03-30 17:34:00 +02:00
3d-gussner
54f594238b Update #MSG_NOZZLE c=12 2021-03-30 17:33:15 +02:00
3d-gussner
a878056be3 Update MSG_BACK c=18 2021-03-30 17:32:04 +02:00
3d-gussner
610ba9bc45 Update #MSG_CARD_MENU c=18 2021-03-30 17:31:18 +02:00
3d-gussner
5eb14dc433 Update #MSG_MAGNETS_COMP c=13 2021-03-30 17:29:56 +02:00
3d-gussner
12372d6525 Update #MSG_Z_PROBE_NR c=14 2021-03-30 17:28:43 +02:00
3d-gussner
7e2c272839 Update #MSG_MESH c=12 2021-03-30 17:27:02 +02:00
3d-gussner
bc8a23a0c6 Update #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8 2021-03-30 17:25:35 +02:00
3d-gussner
3367d7f8fa Update #MSG_SD_CARD c=8 2021-03-30 17:24:45 +02:00
3d-gussner
e8c3ba89dc Update #MSG_MMU_MODE c=8 2021-03-30 17:23:29 +02:00
3d-gussner
532c7438d8 Update #MSG_NOZZLE_DIAMETER c=10, MSG_GCODE c=8 2021-03-30 17:19:00 +02:00
3d-gussner
0a634f7d48 Update #MSG_FIRMWARE c=8 2021-03-30 17:16:31 +02:00
3d-gussner
39b8a35f3a Update #MSG_MODEL c=8 2021-03-30 17:15:48 +02:00
3d-gussner
5b843c3a4d Update #MSG_STRICT c=8 2021-03-30 17:14:49 +02:00
3d-gussner
f60ba6de87 Update #MSG_WARN c=8 2021-03-30 17:13:56 +02:00
3d-gussner
b465c96327 Update #MSG_NONE c=8 2021-03-30 17:13:09 +02:00
D.R.racer
cdcc06f376 SDFile - fix errorneous offset computation 
... my fault, I was originally too optimistic about the overflow

Fixes #3077

PFW-1233
 2021-03-30 11:33:42 +02:00
DRracer
a251dcc14e
Merge pull request #3064 from 3d-gussner/PFW-1222 
PFW-1222: Disable M120 M121
 2021-03-30 10:09:47 +02:00
DRracer
e76b0c40a8
Merge pull request #3066 from espr14/PFW-1223 
Calibration: detect biased PINDA and retry calibration PFW-1223
 2021-03-30 10:08:16 +02:00
3d-gussner
c4f80642b3 Update #MSG_MAIN c=18 2021-03-30 09:52:52 +02:00
3d-gussner
4417deb9ea Update #MSG_SOUND_BLIND c=7, #MSG_SOUND_LOUD c=7, MSG_SOUND_ONCE c=7 2021-03-30 09:50:21 +02:00
3d-gussner
e4ed1ffc17 Update #MSG_SOUND c=9 2021-03-30 09:46:20 +02:00
3d-gussner
2ce5d3a840 Update #MSG_RPI_PORT c=13 2021-03-30 09:44:13 +02:00
3d-gussner
2ca8a23e4a Update #MSG_SORT_ALPHA c=8 #MSG_SORT_TIME c=8 2021-03-30 09:42:53 +02:00
3d-gussner
c85ebb4aa3 Update #MSG_SORT c=7 2021-03-30 09:40:26 +02:00
3d-gussner
440ec49a36 Update #MSG_SETTINGS c=18 2021-03-30 09:38:33 +02:00
3d-gussner
6900c206cd Define #MSG_SEL_PREHEAT_TEMP c=20 r=6 2021-03-30 09:36:32 +02:00
3d-gussner
12dc48ff1a Update #MSG_BELTTEST c=18 2021-03-30 09:34:41 +02:00
3d-gussner
b697117654 Update #MSG_SELFTEST c=18 2021-03-30 09:33:49 +02:00
3d-gussner
9bc702ae0a Update #MSG_SELFTEST_OK c=20 2021-03-30 09:32:27 +02:00
3d-gussner
00fedbb08a Update MSG_LANGUAGE_SELECT c=18 2021-03-30 09:30:04 +02:00
3d-gussner
164226c739 Define #MSG_RIGHT c=10 2021-03-30 09:29:07 +02:00
3d-gussner
2daf1d9114 Define #MSG_LEFT c=10 2021-03-30 09:26:50 +02:00
3d-gussner
169f8983b6 Define #MSG_ADDITIONAL_SHEETS c=20 r=9 2021-03-30 09:23:35 +02:00
3d-gussner
a82ca3def4 Update #MSG_WATCH c=18 2021-03-30 09:21:50 +02:00
3d-gussner
0139bb5a5e Update #MSG_CHANGE_SUCCESS c=20 2021-03-30 09:20:57 +02:00
3d-gussner
0e86ab88fd Update #MSG_FILAMENTCHANGE c=18 2021-03-30 09:20:01 +02:00
3d-gussner
9c0300df66 Update #MSG_HEATING c=20 2021-03-30 09:18:11 +02:00
3d-gussner
280a3c4d3a Update #MSG_PRUSA3D_HOWTO c=18 2021-03-30 09:16:14 +02:00
3d-gussner
12bd2f1a09 Update #MSG_PRUSA3D c=18 2021-03-30 09:15:21 +02:00
3d-gussner
4e4fb7a59f Update #MSG_PRUSA3D_FORUM c=18 2021-03-30 09:14:20 +02:00
3d-gussner
10c586b577 Update #MSG_FLOW c=15 2021-03-30 09:13:09 +02:00
3d-gussner
db07d55c29 Define #MSG_MMU_FIX_ISSUE c=20 r=4 2021-03-30 09:11:19 +02:00
3d-gussner
7c9891d85e Update #MSG_FSENSOR c=12 2021-03-30 09:09:11 +02:00
3d-gussner
7a99f63ffd Define #MSG_FAIL_STATS c=18 2021-03-30 09:06:59 +02:00
3d-gussner
d427563e2b Define #MSG_MMU_FAIL_STATS c=18 2021-03-30 09:05:18 +02:00
3d-gussner
1b4241f031 Update #MSG_ERROR c=10 2021-03-30 09:03:38 +02:00
3d-gussner
1b8ca77b0c Define #MSG_MMU_CUTTING_FIL c=18 2021-03-30 09:01:58 +02:00
3d-gussner
b6031c02a8 Update #MSG_DISABLE_STEPPERS c=18 2021-03-30 08:59:27 +02:00
3d-gussner
69b9acdfc1 Define #MSG_CRASH_RESUME c=20 r=3 2021-03-30 08:57:42 +02:00
3d-gussner
411caddc55 Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7 2021-03-30 08:14:46 +02:00
3d-gussner
2d2dc23e81 Define #MSG_CALIBRATING_HOME c=20 2021-03-30 08:12:20 +02:00
3d-gussner
c8af50d344 Define #MSG_COPY_SEL_LANG c=20 r=3 2021-03-30 08:09:08 +02:00
3d-gussner
71638b49fc Update #MSG_COOLDOWN c=18 2021-03-30 08:05:54 +02:00
3d-gussner
5f9b66a23a Update #MSG_NOT_COLOR c=19 2021-03-30 08:04:39 +02:00
3d-gussner
02ff05639b Define MSG_CHECKING_FILE c=17 2021-03-30 08:01:26 +02:00
3d-gussner
f2298b1a46 Update #MSG_SD_REMOVED c=20 2021-03-30 07:57:42 +02:00
3d-gussner
1e2f5c8323 Update #MSG_MENU_CALIBRATION c=18 2021-03-30 07:55:19 +02:00
3d-gussner
3733c42d38 Update #MSG_HOMEYZ_DONE c=20 2021-03-30 07:54:11 +02:00
3d-gussner
79aa6b198d Update #MSG_HOMEYZ c=18 2021-03-30 07:52:24 +02:00
3d-gussner
fa0382fd3e Update #MSG_CALIBRATE_BED c=18 2021-03-30 07:50:54 +02:00
3d-gussner
2985c6bd6b Update #MSG_BED c=13 2021-03-30 07:49:37 +02:00
3d-gussner
7c906dd0b1 Update #MSG_BED_CORRECTION_MENU c=18 2021-03-30 07:44:16 +02:00
3d-gussner
4d464b79f4 Update MSG_BED_HEATING c=20 2021-03-20 17:30:44 +01:00
3d-gussner
3ee23af7b7 Update MSG_BED_DONE c=20 2021-03-20 16:04:52 +01:00
3d-gussner
ba0f2b2501 Update MSG_LOOSE_PULLEY c=20 2021-03-20 07:11:41 +01:00
3d-gussner
3fcc81ebdb Update MSG_SELFTEST_ENDSTOP c=16 2021-03-20 07:11:07 +01:00
3d-gussner
17df4e1c8d Update MSG_SELFTEST_ENDSTOPS c=20 2021-03-20 07:10:09 +01:00
3d-gussner
4a6c53daf8 Update MSG_SELFTEST_PLEASECHECK c=20 2021-03-20 07:09:33 +01:00
3d-gussner
b3d3feef4d Update MSG_SELFTEST_ERROR c=20 2021-03-20 07:08:48 +01:00
3d-gussner
5d167ce813 Update MSG_SELFTEST_NOTCONNECTED c=20 2021-03-20 07:08:20 +01:00
3d-gussner
625604d704 Update MSG_SELFTEST_HEATERTHERMISTOR c=20 2021-03-20 07:07:14 +01:00
3d-gussner
b86ad11b68 Update MSG_SELFTEST_BEDHEATER c=20 2021-03-20 07:06:37 +01:00
3d-gussner
b3b062e4ba Update MSG_SELFTEST_SWAPPED c=16 2021-03-20 07:05:47 +01:00
3d-gussner
b6684f6114 Update MSG_SELFTEST_AXIS c=16 2021-03-20 07:05:03 +01:00
3d-gussner
bc9f6b6ae6 Update MSG_SELFTEST_AXIS_LENGTH c=20 2021-03-20 07:03:47 +01:00
3d-gussner
83cbfda113 Update MSG_AUTO_HOME c=18 2021-03-20 07:02:43 +01:00
3d-gussner
fe1b4e50be Update MSG_AMBIENT c=14 2021-03-20 06:59:54 +01:00
3d-gussner
178fe36dc7 Create MSG_CANCEL c=9 
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
 2021-03-20 06:30:26 +01:00
3d-gussner
1c965cd988 Update MSG_MEASURED_OFFSET c=20 2021-03-20 06:18:41 +01:00
3d-gussner
92acac453f Update MSG_MMU_POWER_FAILS c=15 2021-03-20 06:16:11 +01:00
3d-gussner
2a848923ea Update MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6 
as Dutch translation is longer
 2021-03-19 18:50:29 +01:00
3d-gussner
baabc0bd1e Fix typo "didnt" to "didn't" 2021-03-19 18:49:13 +01:00
3d-gussner
b806c017cb Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6 
as Polish translation is longer
 2021-03-19 18:47:58 +01:00
3d-gussner
542ff58529 Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6 
as Polish translation is longer
 2021-03-19 18:47:09 +01:00
3d-gussner
147fddd060 Update MSG_CALIBRATE_BED_RESET c=18 2021-03-19 18:41:01 +01:00
3d-gussner
6300211268 Update MSG_PLACE_STEEL_SHEET c=20 r=5 
as Italian translation is longer
 2021-03-19 18:37:23 +01:00
3d-gussner
79a148bb14 Update #MSG_DEFAULT_SETTINGS_LOADED c=20 r=6 
as Italian translation is longer
 2021-03-19 18:34:39 +01:00
3d-gussner
9e60953d44 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." 
as French translation is longer
 2021-03-19 18:14:03 +01:00
3d-gussner
a09f2c2f2d Update "G-code sliced for a newer firmware. Continue?" 
as French translation is longer
 2021-03-19 18:12:16 +01:00
3d-gussner
41022d7d60 Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." 
as French translation is longer
 2021-03-19 18:07:04 +01:00
3d-gussner
813aabab56 Update "Select nozzle preheat temperature which matches your material." c=20 r=6 
as Spanish translation is longer
 2021-03-19 18:03:06 +01:00
3d-gussner
d52a7326be Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6 
as German translation is longer
 2021-03-19 17:55:03 +01:00
3d-gussner
cc29a9485e Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c=20 r=9 
as German translation is longer
 2021-03-19 17:52:54 +01:00
3d-gussner
03a13ace5a Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9 
as French translation is longer
 2021-03-19 17:47:35 +01:00
3d-gussner
17c015f5c0 Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5 2021-03-19 17:44:07 +01:00
3d-gussner
ba9e26f444 Update #MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8 2021-03-19 17:37:24 +01:00
3d-gussner
1bba2255c1 Update MSG_WAITING_TEMP c=20 r=4 2021-03-19 17:34:15 +01:00
3d-gussner
bab4994b89 Update #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=2 2021-03-19 16:52:24 +01:00
3d-gussner
6a54196862 Update "Now remove the test print from steel sheet." c=20 r=4 2021-03-19 16:42:21 +01:00
3d-gussner
8cbf0b3318 Update "Crash detected. Resume print?" c=20 r=2 2021-03-19 16:38:53 +01:00
3d-gussner
891861d475 Update "G-code sliced for a different level. Continue?" c= r= values 2021-03-19 16:35:53 +01:00
3d-gussner
f9a92e2277 Update "Y distance from min" c=20 2021-03-19 16:32:13 +01:00
3d-gussner
1f6834204f Update "Select filament:" c= value 2021-03-19 16:30:04 +01:00
3d-gussner
cbe2a4d301 Update MSG_CHECK_IDLER c=20 r=5 2021-03-19 16:22:05 +01:00
3d-gussner
4dc99d970d Update "MMU needs user attention." c= r= values 2021-03-19 16:17:26 +01:00
3d-gussner
0928c3d133 Update "Lin. correction" c=18 2021-03-19 16:14:16 +01:00
3d-gussner
ce42f2c2a5 Update MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4 2021-03-19 16:11:42 +01:00
3d-gussner
5f9d6a0401 Update "Fail stats" c=18 2021-03-19 16:08:57 +01:00
3d-gussner
878200ecae Update "Fail stats MMU" c=18 2021-03-19 16:06:54 +01:00
3d-gussner
5cbb5b0e17 Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values 2021-03-19 15:53:36 +01:00
3d-gussner
c39b22724d Update "G-code sliced for a different level. Please re-slice the model again. Print cancelled." c= r= values 2021-03-19 15:51:10 +01:00
3d-gussner
5a36b49cee Update "Select temperature which matches your material." c= r= values 2021-03-19 15:45:32 +01:00
3d-gussner
41db8eed30 Update "Select nozzle preheat temperature which matches your material." c= r= values 2021-03-19 15:42:17 +01:00
3d-gussner
f319dede23 Update "Please insert filament into the first tube of the MMU, then press the knob to load it." c= r= values 2021-03-19 15:39:57 +01:00
3d-gussner
286c1931a5 Update #MSG_WIZARD_LOAD_FILAMENT c=20 r=5 2021-03-19 15:33:13 +01:00
3d-gussner
6a267e5a9a Update "Press the knob to resume nozzle temperature." c= r= values 2021-03-19 15:30:13 +01:00
3d-gussner
b001eaec8d Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c= r= values 2021-03-19 15:24:28 +01:00
3d-gussner
18a58c504d Update #MSG_BED_HEATING_SAFETY_DISABLED c=20 r=3 2021-03-19 15:21:42 +01:00
3d-gussner
ee8c9227cf Update #MSG_SELFTEST_FANS c=20 2021-03-19 15:16:23 +01:00
3d-gussner
ba73d14511 Update "Fix the issue and then press button on MMU unit." c= r= values 2021-03-19 15:13:56 +01:00
3d-gussner
0c18ddcb10 Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." c= r= values 2021-03-19 15:10:18 +01:00
3d-gussner
89900a5109 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." c= r= values 2021-03-19 15:07:14 +01:00
3d-gussner
49e8f84916 Update "G-code sliced for a newer firmware. Continue?" c= r= values 2021-03-19 15:02:53 +01:00
3d-gussner
fd7aa82dce Update MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6 2021-03-19 15:00:00 +01:00
3d-gussner
1ed7d8fc4b Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=5 2021-03-19 14:42:17 +01:00
3d-gussner
dbec06086c Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5 2021-03-19 14:40:04 +01:00
3d-gussner
37ec18596b Update #MSG_USERWAIT c= value 2021-03-19 14:29:15 +01:00
3d-gussner
dd4c02aa15 Update "Heating disabled by safety timer." c= r= values 2021-03-19 14:23:46 +01:00
3d-gussner
9a719fd0b9 Update "Calibrating home" c= value 2021-03-19 14:17:30 +01:00
DRracer
8ac1d5b95e
Attempt to workaround the M73 C0|D0 visual issue (#3067) 
Attempt to workaround the M73 C0|D0 visual issue

This is an attempt to enable alternation of time to print finish and time
to color change even in the last minute of time to color change, i.e. be
able to print "0:00C".

The proposed solution leverages the capability of the current FW to read
float values from the C|D parameter. This could have the raw benefit of
being able still to alternate this time on the LCD as "0:00C" (or
"<1min") if the slicer sends a non-zero but <1 time right before the
color change.

Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: 3d-gussner <3d.gussner@gmail.com>
 2021-03-19 10:18:28 +01:00
D.R.racer
f31189e5be Version changed (3.10.0-RC1 build 4078) 2021-03-17 12:30:54 +01:00
espr14
99206884b5 Calibration: detect biased PINDA and retry calibration 
PFW-1223
 2021-03-12 05:04:49 +01:00
3d-gussner
6355458052 Add def M120_M121_ENABLED to Configuration_adv.h 2021-03-11 15:00:49 +01:00
3d-gussner
832e881955 Disable M120 M121 2021-03-10 17:46:19 +01:00
espr14
eb4cf1a77f Calibration: return XY back after Z search 
PFW-1217
 2021-03-10 10:27:57 +01:00
awenelo
9b21ebd376 Fix numbering for custum sheet hex values 2021-03-07 12:14:03 -05:00
awenelo
09b3632d43 Final changes + cleanup 2021-03-07 09:44:33 -05:00
awenelo
144fc197a5 Fix index number 2021-03-06 14:20:06 -05:00
awenelo
c777199d34 Simplify sheet numbering 2021-03-06 13:26:28 -05:00
DRracer
6489c6f17f
Merge pull request #3036 from wavexx/remove_is_buffer_empty 
Remove duplicate function is_buffer_empty()
 2021-03-05 08:28:40 +01:00
awenelo
53a3772f09 Add satin sheet 2021-03-04 10:14:29 -05:00
Alex Voinea
f0eedf301d
optiboot: check boot_app_magic as well before early exit 2021-03-03 16:31:55 +02:00
Alex Voinea
c951bea627
Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
Alex Voinea
c95d2fcbd7
Use avr-libc wdt library 2021-03-03 16:31:06 +02:00
DRracer
073cbe0339
Merge pull request #3048 from DRracer/bootappflags-bad-addr 
Fix flashing languages with inline wdr instructions
 2021-03-03 13:46:08 +01:00
Alex Voinea
8ced0579d6
Move SerialHead declaration outside of loops 2021-03-03 14:35:37 +02:00
DRracer
c1849f5cc2
Merge pull request #2405 from leptun/MK3_NEW_SD_COMPILATION 
⚡️New SD menu
 2021-03-03 11:45:04 +01:00
Alex Voinea
026145b78b
Fix CFM message end pointer 2021-03-03 12:31:14 +02:00
D.R.racer
3922bf2877 Fix flashing languages with inline wdr instructions 
A fairly mysterious situation happened recently in the MK3 branch.
After merging #3033 (change watchdogReset() into a single inline wdr instruction)
we were unable to flash languages.

Since it looked similarly suspicious like issue #2954 we started investigating deeply.
The problem was in the code as described in the comment in this PR.
 2021-03-03 11:19:39 +01:00
3d-gussner
7fa93dfa1b Fix back from submenu Community made to Select language after factory reset 2021-03-01 09:18:47 +01:00
3d-gussner
fbcbba78a3 Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 2021-03-01 09:04:10 +01:00
DRracer
e9c3becb2c
Merge pull request #2572 from wavexx/fwretract_plan_sync 
Always sync before manipulating the planner position in FWRETRACT
 2021-03-01 08:26:57 +01:00
3d-gussner
6d7d9089f7 Add defines and templates for community languages 
Add `Community made` submenu to `Select language`
 2021-03-01 08:22:43 +01:00
3d-gussner
d0d4298249 Update EEPROM documentation for Service prep 2021-02-28 18:18:06 +01:00
3d-gussner
3e06a17810 Fix LCD output 2021-02-28 18:04:07 +01:00
Alex Voinea
28f21c8630
Fix bubblesort sorting speed. ShellSort is probably broken 2021-02-26 19:17:14 +02:00
Alex Voinea
6e0ecf5cd2
Remove redundant click sound in factory reset (MK3 merge issue) 2021-02-26 18:22:32 +02:00
DRracer
f3c422c40e
Merge pull request #3039 from 3d-gussner/PFW-910 
Fix issue #3037
 2021-02-26 12:07:10 +01:00
Alex Voinea
194438c130
Fix formatting 2021-02-26 09:54:57 +02:00
Alex Voinea
7faffa539a
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-26 09:48:46 +02:00
Alex Voinea
f346125948
Use BubbleSort by default. Disable ShellSort until I fix it 2021-02-26 09:18:59 +02:00
Alex Voinea
225c456ae6
Limit progressbar to LCD_WIDTH 
for some stupid reason bubbleSort sometimes exceeds the total value :)
 2021-02-26 09:18:28 +02:00
Alex Voinea
c63f92ae52
Invert shellSort logic 2021-02-26 08:57:49 +02:00
Alex Voinea
204da1cc3f
Factory reset and check_file progress bar 2021-02-25 21:04:05 +02:00
Alex Voinea
8821439878
Cardreader progressbar code 2021-02-25 20:25:32 +02:00
Alex Voinea
afa7c7ab03
Remove forgotten (?) undef at the end of menu.cpp 2021-02-25 19:29:14 +02:00
Alex Voinea
54b2edbc8c
Update debugging code 2021-02-25 19:26:01 +02:00
Yuri D'Elia
e8f6c9fac9 Exit the _lcd_move* menus when homing/leveling 
Instead of resetting the encoder status when homing or leveling, simply
exit the move/liveZ menu.

When transitioning from idle->printing, axis move shouldn't be allowed
as it would insert moves during a print. This is always wrong.
The menu must be always dismissed. Instead of checking all places where
the menu could be active, automatically dimiss the menu from within
_lcd_move when homing/MBL is happening. The long-push function and the
settings menu checks if "axis move" is possible, and thus
prevent the user to re-enter the menu already.

When doing the first layer calibration, the _lcd_babystep_z is
automatically brought back after MBL has completed.

Technically we should do the same when entering/exiting the paused state
in _lcd_move. However, it's better to dismiss _any_ menu in
stop_and_save_print_to_ram/restore_print_from_ram_and_continue instead.

To be done later...
 2021-02-25 17:33:59 +01:00
Yuri D'Elia
b4f5633bde Enable "Move axis" and "Disable steppers" only when idle 
Move axis queues movements, which disrupts a normal print, homing (when
XY is combined) or MBL.

Likewise, "Disable steppers" only makes sense when the printer is fully
idle.

Only allow such actions when the printer is not active and/or in the
paused state.
 2021-02-25 17:33:59 +01:00
Yuri D'Elia
14a1a93bc8 Include probing/MBL in the PRINTER_ACTIVE check 
This prevents to perform disruptive actions during homing or between MBL
probes, which would result in a failure.
 2021-02-25 17:33:59 +01:00
Yuri D'Elia
28e9c814fc Remove code duplication for babystep insertion 2021-02-25 16:44:16 +01:00
Yuri D'Elia
019c818c05 Insert babysteps using CRITICAL_SECTION instead of cli/sei 2021-02-25 16:44:16 +01:00
Yuri D'Elia
f5e419530b Inhibit LiveZ from the settings menu during mesh bed leveling 2021-02-25 16:44:16 +01:00
Yuri D'Elia
ff4e53d2d1 Prevent babysteps in more unsafe situations through homing_flag 
Further restrict babystep insertion when the lcd_update is enabled by
toggling homing_flag when probing Z (where Z shouldn't be touched
anyway as it would disrupt the measurement)

Also reset the encoder value during mesh leveling.
 2021-02-25 16:44:16 +01:00
Yuri D'Elia
c241adec5f Ensure babystep_apply|undo always uses the planner 
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.

The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
 2021-02-25 16:44:16 +01:00
DRracer
ffae16bf95
Merge pull request #3033 from DRracer/wdr-inline 
Make watchdogReset() force_inline
 2021-02-25 13:53:34 +01:00
3d-gussner
d9b820690e Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 
fix merge issues
 2021-02-25 09:56:23 +01:00
DRracer
7b22895f23
Merge pull request #3032 from DRracer/service-prep2 
Make a special welcome message for Shipping/Service prep.
 2021-02-25 08:51:47 +01:00
DRracer
9ed713ab13
Merge pull request #3015 from 3d-gussner/PFW-1174 
PFW-1174: Add pause/resume for USB/host prints via LCD menu
 2021-02-25 08:50:41 +01:00
3d-gussner
657767f073 Merge branch 'MK3' into MK3_Fix_LCD_stats 
Fix merge issue
 2021-02-24 09:01:30 +01:00
3d-gussner
076613fd97 Show Fil. sensor in Support::Sensor info only if IR Sensor detected 2021-02-23 15:20:08 +01:00
3d-gussner
08a6a4b25e Enable Filament sensor action during print even if in Support::Sensor info 2021-02-23 15:19:03 +01:00
D.R.racer
734e497cd0 Move wizard msgs into messages.h/c + add more translation markers 2021-02-23 15:09:19 +01:00
3d-gussner
fdff5d84b2 Move Filament sensors to Support -> Sensor Info 2021-02-23 08:52:40 +01:00
3d-gussner
8d4176a530 Add "Fan check [On|Off]" menu to tune 
User can en/disable the fan check during print. This is very useful in case of false positive
fan errors to let the user to decide to finish print with "faulty" fan.
 2021-02-23 07:24:33 +01:00
3d-gussner
30b60e44d2 || isPrintPaused is already in PRINTER_ACTIVE 2021-02-22 18:21:20 +01:00