Alessandro Ranellucci
bbb190dc68
Generate infill using each object's bounding_box instead of full print. #1177
2013-05-19 11:35:41 +02:00
Alessandro Ranellucci
d2425748a3
Code cleanup and remove arc compensation code
2013-05-13 13:18:58 +02:00
Alessandro Ranellucci
5efa409c7c
Move gap fill to its own method
2013-05-13 13:07:22 +02:00
Alessandro Ranellucci
1d94618c5e
Correctly detect external hole perimeters
2013-05-13 12:52:57 +02:00
Alessandro Ranellucci
ca549cd2fe
Perimeters refactoring complete
2013-05-11 21:30:26 +02:00
Alessandro Ranellucci
67b24efd49
Incomplete work - still wrong order
2013-05-11 21:05:29 +02:00
Alessandro Ranellucci
df62c25c8f
One more offset_ex() optimization
2013-05-11 09:39:38 +02:00
Alessandro Ranellucci
0e100827f8
Avoid useless looping and usage of ExPolygons
2013-05-11 09:35:33 +02:00
Alessandro Ranellucci
6b8894cf9a
Rename ex_int_offset2 to offset2_ex
2013-05-10 13:56:29 +02:00
Alessandro Ranellucci
c2301c5796
Don't extend solid layers when fill density is 0
2013-04-29 15:55:50 +02:00
Alessandro Ranellucci
17f76c4951
Move bridge detection to its own method
2013-04-18 18:43:46 +02:00
Alessandro Ranellucci
e088d9b3f7
Cache Slic3r::Fill object
2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
312bb285a0
Fix initialization of Rectilinear filler
2013-04-18 18:37:46 +02:00
Alessandro Ranellucci
b160feacfd
Merge branch 'master' into clipper-optimizations
2013-04-18 17:36:42 +02:00
Alessandro Ranellucci
7e51cbcf69
Allow 0.1mm slots. #959 #1056
2013-04-04 01:24:40 +02:00
Alessandro Ranellucci
1187f4846d
Some Clipper optimizations
2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
d4119b0eb1
Better bridge direction detection. #1068
2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
1b79b1cb20
Refactoring: use the clone() method for inflating Surface objects
2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
aae9625a13
Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049
2013-03-26 15:47:40 +01:00
Alessandro Ranellucci
7ec6c6ffba
Lower 0.5*w to 0.4*w to fill finer gaps. #1057
2013-03-19 16:08:19 +01:00
Alessandro Ranellucci
35bd5a3423
New --solid-infill-extrusion-width option
2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
db2e76a0df
New option to change perimeter order. #534
2013-03-16 18:56:49 +01:00
Alessandro Ranellucci
33b40eda18
Always fix self-intersecting polygons that Douglas-Peucker might return
2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
b7945ac790
Finished new extra perimeters implementation
2013-03-11 14:23:16 +01:00
Alessandro Ranellucci
caa79583ff
Tiny optimization
2013-03-09 17:08:17 +01:00
Alessandro Ranellucci
fa41e15c68
Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035
2013-03-09 17:07:11 +01:00
Alessandro Ranellucci
2f192bddca
Make tests happy
2013-03-07 16:24:25 +01:00
Alessandro Ranellucci
97e864699e
New top-infill-extrusion-width option
2013-03-07 16:00:58 +01:00
Alessandro Ranellucci
36d24ccb0b
Infill refactoring and cleanup complete
2013-03-07 15:47:32 +01:00
Alessandro Ranellucci
d928f005e6
Some incomplete work for cleaner infill logic
2013-03-05 20:03:46 +01:00
Mike Sheldrake
28467b68e0
typo - fix wrong bridge direction #621
...
fixes two out of three reported in #621 (but not the first one)
likely the same issue in #706 and #1003
2013-02-27 15:16:07 -08:00
Alessandro Ranellucci
919d1131f8
Use nearest-neighbor search for internal perimeters too. #1025
2013-02-27 11:04:14 +01:00
Alessandro Ranellucci
a9090688f9
Refactor bridge flow to Slic3r::Flow::Bridge class
2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
08a72c0824
Use bridge math for the first solid infill layer above sparse infill. #240
2013-02-23 21:39:13 +01:00
Alessandro Ranellucci
0634437364
Keep the full geometries in $layer->slices, including thin walls
2013-02-23 18:21:29 +01:00
Alessandro Ranellucci
28638019ae
Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994
2013-02-22 18:23:23 +01:00
Alessandro Ranellucci
bec2371604
Fix regression introduced in 91bcfc8a74
2013-02-22 16:56:43 +01:00
Alessandro Ranellucci
91bcfc8a74
Remove $Slic3r::flow and $Slic3r::first_layer_flow
2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
b9c84490b8
Get rid of most calls to $Slic3r::flow
2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
cac79c0575
New option to only infill where strictly needed for supporting ceilings
2013-02-09 23:36:32 +01:00
Alessandro Ranellucci
26a3cd5542
Refactor chained_path(), add chained_path_items() and chained_path_points()
2013-02-06 12:03:53 +01:00
Alessandro Ranellucci
090e3b1fe3
Rename shortest_path to chained_path, which reflects its algorithm more correctly
2013-02-05 17:27:45 +01:00
Alessandro Ranellucci
ecc7e4560e
Don't fill gaps if fill density is 0. #915
2013-01-17 10:39:05 +01:00
Mike Sheldrake
73aae07e74
842, 847 slightly enlarge a clip polygon to counteract integer truncation
...
Geomery in referenced issues triggered Clipper problems, but also
pointed to a situation where integer truncation (as coordinates pass
into Clipper) might be shrinking a clip polygon in a way that leaves
degenerate or unwanted thin clip results. Growing the clip polygon by 2
is expected to overcome any issues caused by truncation of floats.
2013-01-11 10:15:42 -08:00
Alessandro Ranellucci
141a8d3989
Bugfix: some holes being closed incorrectly. #858
2012-12-30 17:57:30 +01:00
Alessandro Ranellucci
6e6bc74636
Added failing test case for troubleshooting unexpected filled holes. #858
2012-12-30 16:27:20 +01:00
Alessandro Ranellucci
0da71dbdfa
Fix regression causing wrong number of solid shells when using fill_density = 0 (includes regression test)
2012-12-23 20:20:17 +01:00
Alessandro Ranellucci
15f07197d8
Don't store ->surfaces anymore. Save memory, save time
2012-12-22 23:57:39 +01:00
Alessandro Ranellucci
b70404bb23
Disable gap filling if gap fill speed is set to zero
2012-12-17 19:55:25 +01:00
Alessandro Ranellucci
283809f5c2
No need for a role to identify small perimeters
2012-12-05 10:47:41 +01:00
