Commit graph

7290 commits

Author SHA1 Message Date
David Kocik
8ca225b38a config wizard - hide logo if small height 2021-02-24 09:21:40 +01:00
Vojtech Bubnik
fcb714cd24 Added a single perimeter to the first layer of support or raft.
Fixes [Request] Add optional perimeter to raft 
Fixes First support layer does not stick to bed 

New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. 
Fixes raft is larger than necessary 
Fixes Supports on the build plate should have a solid bottom interface for better adhesion 

Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced 
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed 
2021-02-24 08:48:40 +01:00
Lukáš Hejl
77d007c484 Fixed calculation of a distance from begin of a contour in the avoid crossing perimeters.
The total length of a contour was incorrectly computed, which could cause the longest detour was selected instead of the shortest one in some cases.
2021-02-23 20:56:36 +01:00
Lukáš Hejl
dc576b0511 Fixed inner offset in the avoid crossing perimeters.
Minimum contour width was used incorrectly, which could lead to breaking contour to more disconnected polygons.
2021-02-23 20:43:34 +01:00
Lukáš Hejl
e123dfa8a4 Fixed wrong orientation of infill and gap-fill extrusion.
When an island contains exactly one infill ExtrusionEntity, this extrusion was oriented to maximize travel distance from the end of the previous extrusion of perimeters instead of minimizing it.
2021-02-23 20:07:40 +01:00
Vojtech Bubnik
d2c46025c7 Fix of Enforce support for first N layers has no effect 2021-02-23 15:31:21 +01:00
Vojtech Bubnik
055d2321e7 Trimming support base layer with brim.
Fixes Brim destroyed by support aka. Enable supports on top of brim 
Fixes Brim Priority/Support on Brim 
Fixes Phantom Support columns interfere with brim 
Fixes false generation of brim when supports are used 

This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
2021-02-23 14:43:47 +01:00
Vojtech Bubnik
8ba230db9f Fix of Paint on support ignores some paints.
When projecting the horizontal or nearly horizontal support enforcers or blockers
into object layers, the projection may fall on a layer above or below the layer
where it should in case the nearly horizontal support enforcer or blocker
triangles are intersecting the slicing plane of one of the object layers.
Due to numerical issues, projection of the support blocker or
enforcer triangles may not fall to the same side of the slicing plane
as when slicing the object. To make the projection robust, horizontal triangles
are newly projected to both the layer below and above if they are close
to the object slicing plane.
2021-02-23 12:30:15 +01:00
enricoturri1966
e1c201e714 Partial revert of 204714d566 -> Alternate fix for crash on printer presets switching between MM and SM printers 2021-02-23 12:00:23 +01:00
YuSanka
671efb02c9 Fix of - Preview: View Menu/List placement incorrect
Use wxComboBox with wxCB_READONLY flag instead of wxChoice
2021-02-23 10:04:43 +01:00
Vojtech Bubnik
7b52dc2324 Fixing build on gcc/clang 2021-02-22 19:43:18 +01:00
YuSanka
03dee86071 ObjectList: After deleting volumes from the object, update the extruder color for the object from the last and only volume 2021-02-22 18:50:38 +01:00
Vojtech Bubnik
032df7f18f PNGReadWrite: png::write_gray_to_file(), png::write_gray_to_file_scaled() 2021-02-22 18:07:27 +01:00
Vojtech Bubnik
3985d7bb81 Fixes Support Interface printed on air
Fixes Supports generated loose in space 
Fixes Support Interface layers in midair 
2021-02-22 18:07:27 +01:00
Vojtech Bubnik
d2ca4563e8 Extended SVG::export_expolygons() with legend. 2021-02-22 18:07:27 +01:00
YuSanka
204714d566 Fix a crash on printer presets switching between MM and SM printers:
1. DoubleSlider::Control : Update extruder colors before another updates for layers slider
2. GCodeViewer : Control count of extruders during the legend updating
2021-02-22 17:08:03 +01:00
YuSanka
f11e81517d PresetComboBox: Fixed thin/wide_space_icon_width scale
+ Added border for the color_extruder bitmaps
2021-02-22 17:08:03 +01:00
Lukas Matena
3fd36f08e0 Show a notification when attempting to slice during SLA support points editing
This should also fix  and a similar crash when deleting an object during manual editing (which was introduced between 2.2.0 and 2.3.0)
2021-02-22 16:26:16 +01:00
Lukas Matena
1904b7b904 Bugfix: custom seam did not work for triangles that were exactly vertical
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
2021-02-22 16:26:16 +01:00
Lukas Matena
bd2cbea202 Fix aligned seam when sequential printing is enabled 2021-02-22 16:26:16 +01:00
enricoturri1966
613f961b9f - Fixed toolpaths generation 2021-02-22 15:27:40 +01:00
tamasmeszaros
9092033bea Eliminate libnest2d warning on mac 2021-02-22 13:08:24 +01:00
YuSanka
791c191ea7 Fix of - Slicer crashes in MMU2S mode 2021-02-22 09:56:23 +01:00
enricoturri1966
92b1302a08 Follow-up of 86d7e1fb90 -> Custom gcode validation in Filament settings tab 2021-02-22 08:39:36 +01:00
enricoturri1966
9b0b0f5e27 Follow-up of 86d7e1fb90 -> Custom gcode validation in Printer settings tab 2021-02-22 08:13:48 +01:00
Vojtech Bubnik
ac97572cfe Fixed compiler warnings 2021-02-19 20:09:57 +01:00
Vojtech Bubnik
12d14eaa2f Fixing a constness issue of the preceding commit. 2021-02-19 19:00:43 +01:00
Vojtech Bubnik
cceaae84fb Silencing compiler warning in AGGRaster on Visual Studio 2021-02-19 18:57:45 +01:00
Vojtech Bubnik
fb7b995050 Improvements in FDM support generator:
Projection into a grid has been reworked to use the AGG rasterizer.
This fixes  and .
Also the raster is now being oversampled by maximum 8x8 samples
and the supports are only allowed to expand inside the cell.
This significantly reduces leakage of supports through object walls,
which fixes .
2021-02-19 18:50:44 +01:00
enricoturri1966
c3a52f9b01 Tech ENABLE_RENDER_PATH_REFRESH_AFTER_OPTIONS_CHANGE set as default 2021-02-19 15:38:05 +01:00
enricoturri1966
bbf5c62af5 Follow-up of 9afaebac75 -> Fixed wrong gcode line numbers shown on preview horizontal slider when time estimation for silent mode is active 2021-02-19 14:12:49 +01:00
enricoturri1966
0a1448196b Tech ENABLE_NEW_NOTIFICATIONS_FADE_OUT set as default 2021-02-19 12:18:09 +01:00
enricoturri1966
d3daea2df8 Follow-up of 86d7e1fb90 - Fixed build warning on OsX 2021-02-18 15:35:38 +01:00
Lukáš Hejl
8f293f0cb5 Fixed unnecessary travels after calling the avoid crossing perimeters when the wipe is enabled.
When the avoid crossing perimeters was enabled, and the wipe was enabled, there were unnecessary travels in the opposite direction than the wipe travel.
2021-02-18 14:41:56 +01:00
enricoturri1966
86d7e1fb90 - Validation of custom g-code against gcode processor reserved keywords 2021-02-18 14:34:40 +01:00
enricoturri1966
aec39aaba6 Tech ENABLE_PREVIEW_TYPE_CHANGE set as default 2021-02-18 11:52:14 +01:00
enricoturri1966
7c3e3272aa Tech ENABLE_ARROW_KEYS_WITH_SLIDERS set as default 2021-02-17 17:21:06 +01:00
enricoturri1966
77be228b75 Tech ENABLE_DRAG_AND_DROP_FIX set as default 2021-02-17 14:52:58 +01:00
YuSanka
349ce7fd50 Fix of - Purging Volumes dialog doesn't save pasted values 2021-02-17 14:37:25 +01:00
enricoturri1966
50c6fc1719 Tech ENABLE_TOOLPATHS_WIDTH_HEIGHT_FROM_GCODE set as default 2021-02-17 11:23:17 +01:00
YuSanka
23b6a597a8 Fixed a bug with erase of the multiple instance selection in 3D-scene
+ Try to fix accidentally crash on Copy/Paste
2021-02-16 21:20:06 +01:00
Vojtech Bubnik
6ea5781709 Fix of Supports printed too slowly.
Processing of CoolingBuffer is newly staggered for support layers
until the 1st object layer above supports is received by CoolingBuffer.
2021-02-16 11:30:57 +01:00
enricoturri1966
b14d872104 Fixed update of the horizontal slider after changing visibility of options in preview 2021-02-16 10:46:15 +01:00
enricoturri1966
9afaebac75 - Added option to show gcode line number on horizontal slider in preview 2021-02-16 10:07:05 +01:00
Vojtech Bubnik
32db22b77c Fix of Improve Support material adhesion by base type interface layers
under soluble supports. 
Implemented as a pull request  by @spiky2021
and reworked.

commit c7993e619225553a2c4078787907b9ebbd9ac759
Author: spiky2021 <77010315+spiky2021@users.noreply.github.com>
Date:   Thu Feb 11 12:39:25 2021 +0100

    Base type interfaces for soluble interface supports

    At the moment soluble support material adhesion is weak due to sparse support layers under soluble support layers. I reported as issue  with pictures, as well.
    I modified two methods to the SupportMaterial Class including their headers.
    The new methods add two base type interface layers to the support structure, in case the extruders are different and soluble support is choosen.
    Since it is conditionally activated, it in general doesn't need a GUI input. But a GUI option number of base interface layers may enabled users to adapt this feature to their needs.
    This is my second try to provide a pull request on this topic. Reset my fromer repository, because first I merged this and all other changes to my master and couldn't provide separate pull request anymore.
2021-02-15 18:07:44 +01:00
YuSanka
b166bd7845 Follow-up 6effa30322 : Fixed a crash of stand-along GcodeViewer
when open/close Preferences
2021-02-15 15:57:31 +01:00
enricoturri1966
125fcd0623 Removed obsolete class GLCanvas3D::WarningTexture 2021-02-15 11:00:37 +01:00
Vojtech Bubnik
a6bd2d7664 Fix of 3DBed Regression 2021-02-15 09:31:19 +01:00
Pascal de Bruijn
b75830df6e UnsavedChangesDialog: fix wxString casts
similar instance: 08388d3daa

related to: 
2021-02-14 07:41:21 +01:00
Vojtech Bubnik
9c568a543c Improving 3MF import: checking for invalid data. 2021-02-12 16:46:49 +01:00