Alessandro Ranellucci
|
172253cfd7
|
Always use rectilinear infill for internal-solid surfaces
|
2011-12-15 22:05:15 +01:00 |
|
Alessandro Ranellucci
|
8e06a4f6f2
|
Bugfix: fatal error when using concentric infill
|
2011-12-15 21:46:29 +01:00 |
|
Alessandro Ranellucci
|
e6bce05d9b
|
Releasing 0.5.6
|
2011-12-15 20:39:14 +01:00 |
|
Alessandro Ranellucci
|
b422537cc4
|
Bugfix: do not die when no layers are detected at all
|
2011-12-15 20:36:46 +01:00 |
|
Alessandro Ranellucci
|
18cfc15ead
|
Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)
|
2011-12-15 20:21:34 +01:00 |
|
Alessandro Ranellucci
|
2e013e72e8
|
Bugfix: models located very far from XYZ origin were incorrectly placed on the print area
|
2011-12-15 19:40:32 +01:00 |
|
Alessandro Ranellucci
|
40d06a6e11
|
Erorr in last commit about automatic extrusion width. #112
|
2011-12-15 12:50:02 +01:00 |
|
Alessandro Ranellucci
|
156a1deb0a
|
Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112
|
2011-12-15 09:33:42 +01:00 |
|
Alessandro Ranellucci
|
d346bc02cc
|
Comments are now disabled by default, new --gcode-comments option to enable them
|
2011-12-14 19:49:21 +01:00 |
|
Alessandro Ranellucci
|
3d213069a6
|
Bugfix: 100% overlap between perimeter and infill. #118
|
2011-12-14 19:40:18 +01:00 |
|
Alessandro Ranellucci
|
b9d01a32e5
|
Merge branch 'new-math'
|
2011-12-14 16:12:05 +01:00 |
|
Alessandro Ranellucci
|
048f7ca468
|
Adjusted flow width for solid infills was ignored
|
2011-12-14 11:35:19 +01:00 |
|
Alessandro Ranellucci
|
4bee1a12b8
|
Take overlap into account for external dimensions
|
2011-12-14 11:21:43 +01:00 |
|
Alessandro Ranellucci
|
efbcbc5bbf
|
Changed default retraction speed to 30mm/s. #115
|
2011-12-14 10:33:22 +01:00 |
|
Alessandro Ranellucci
|
ca5dfc05e7
|
Accept STL files with spaces at the end of vertex lines. #119
|
2011-12-14 10:29:08 +01:00 |
|
Alessandro Ranellucci
|
569e737ae1
|
Only connect infill edges when not doing solid surfaces
|
2011-12-13 17:36:03 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
869cb48c1a
|
Merge branch 'master' of github.com:alexrj/Slic3r
|
2011-12-12 17:35:18 +01:00 |
|
Alessandro Ranellucci
|
3c2b2cfef2
|
Bugfix: duplicate options did not work correctly for copies > 2. #113
|
2011-12-12 17:32:45 +01:00 |
|
Richard Goodwin
|
557afcc4b1
|
Added scale to settings output
|
2011-12-11 15:32:47 -06:00 |
|
Alessandro Ranellucci
|
0ebd8eb8a9
|
Don't die when config has unknown options. #108
|
2011-12-10 10:39:07 +01:00 |
|
Alessandro Ranellucci
|
c957c27367
|
Remember last opened directory. #106
|
2011-12-09 14:07:50 +01:00 |
|
Alessandro Ranellucci
|
b92ba67272
|
Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac
|
2011-12-08 22:06:53 +01:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
7473d5f140
|
Set default infill angle to 45°. #103
|
2011-12-08 10:33:05 +01:00 |
|
Alessandro Ranellucci
|
d813aea59a
|
Don't slow down retractions on bottom layer. #101
|
2011-12-08 10:28:23 +01:00 |
|
Alessandro Ranellucci
|
1f64a01ed4
|
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
|
2011-12-08 10:25:19 +01:00 |
|
Alessandro Ranellucci
|
99c1facec6
|
Bugfix: division by zero when nothing in a single layer could be parsed. #100
|
2011-12-07 20:18:12 +01:00 |
|
Alessandro Ranellucci
|
525855dc7d
|
Bugfix: fatal error when combining infills. #96
|
2011-12-07 20:15:08 +01:00 |
|
Richard Goodwin
|
3ced3ee91f
|
Fixed bolding and font issues on Windows
|
2011-12-06 15:36:42 -06:00 |
|
Alessandro Ranellucci
|
313f77ee59
|
Bugfix: removed error when filling small regions
|
2011-12-05 19:54:19 +01:00 |
|
Alessandro Ranellucci
|
2ba513bdb2
|
Bugfix: after recent changes, objects had slight dimension errors. #56
|
2011-12-05 18:48:48 +01:00 |
|
Alessandro Ranellucci
|
3d0cde2fce
|
Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28
|
2011-12-05 13:01:02 +01:00 |
|
Alessandro Ranellucci
|
b8a5d5a208
|
Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93
|
2011-12-05 12:15:52 +01:00 |
|
Alessandro Ranellucci
|
72499d230a
|
Releasing 0.5.5
|
2011-12-04 21:32:38 +01:00 |
|
Alessandro Ranellucci
|
53bc9c7421
|
Customizable speed for small perimeters. #60
|
2011-12-04 20:50:03 +01:00 |
|
Alessandro Ranellucci
|
ea254588f7
|
More tolerance for config files
|
2011-12-04 20:41:17 +01:00 |
|
Alessandro Ranellucci
|
28a89c70c9
|
New bridge flow rate multiplier option. #85
|
2011-12-04 20:29:21 +01:00 |
|
Alessandro Ranellucci
|
3ac9dd513b
|
Add first layer height ratio option to the GUI
|
2011-12-04 19:17:42 +01:00 |
|
Alessandro Ranellucci
|
b79ae44e3d
|
Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16
|
2011-12-04 19:10:43 +01:00 |
|
Alessandro Ranellucci
|
eb64cc4965
|
More fixes for bridges. #58
|
2011-12-04 18:37:37 +01:00 |
|
Alessandro Ranellucci
|
d056535bd8
|
Further corrections to the bridge angle detection algorithm. #58
|
2011-12-04 17:19:03 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
4fe340cc56
|
Many fixes to the bridge direction detection algorithm and other things. #58
|
2011-12-03 18:31:31 +01:00 |
|
Alessandro Ranellucci
|
792960aae1
|
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
|
2011-12-02 23:35:39 +01:00 |
|
Alessandro Ranellucci
|
5375f5fef4
|
Mark important settings in bold
|
2011-12-02 17:02:36 +01:00 |
|
Alessandro Ranellucci
|
b6fc93c0de
|
Releasing 0.5.4
|
2011-12-01 22:39:44 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
830965fc0b
|
Note used settings in exported gcode. #52
|
2011-12-01 22:20:48 +01:00 |
|
Alessandro Ranellucci
|
aab85a4e27
|
Bugfix: unable to read back config file if start or end gcode was empty. #84
|
2011-12-01 22:06:07 +01:00 |
|
Alessandro Ranellucci
|
e99c9f9e5f
|
Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77
|
2011-12-01 22:04:23 +01:00 |
|
Alessandro Ranellucci
|
2a02d26ca5
|
Fixed regression: fill density = 0 was preventing extra solid layers. #75
|
2011-12-01 21:15:02 +01:00 |
|
Alessandro Ranellucci
|
f7a9c9be63
|
Bugfix: sometimes holes were detected as contours
|
2011-12-01 20:57:38 +01:00 |
|
Alessandro Ranellucci
|
133f3a0495
|
Bugfix: Clipper error occurred under certain circumstances
|
2011-12-01 19:40:45 +01:00 |
|
Alessandro Ranellucci
|
b03afc7f1c
|
Bugfix: some bridges were not detected correctly. #57
|
2011-11-30 20:32:28 +01:00 |
|
Alessandro Ranellucci
|
52270d6b95
|
Bugfix: extrusion width ratio gave wrong flow rate under certain circumstances. #80
|
2011-11-30 18:18:17 +01:00 |
|
Alessandro Ranellucci
|
71c359bb29
|
Cleaning recent changes
|
2011-11-30 17:48:00 +01:00 |
|
Alessandro Ranellucci
|
42383dec84
|
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
|
2011-11-30 16:28:09 +01:00 |
|
Alessandro Ranellucci
|
d51a37a0ae
|
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
|
2011-11-30 16:07:31 +01:00 |
|
Michael Moon
|
729905d342
|
allow solid fill layers to be zero
|
2011-11-30 12:51:34 +11:00 |
|
Alessandro Ranellucci
|
2970e31540
|
Bugfix: some bridges being very close could lead to overlapping infill
|
2011-11-29 11:36:52 +01:00 |
|
Alessandro Ranellucci
|
d168ecbb4e
|
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
|
2011-11-29 10:15:50 +01:00 |
|
Alessandro Ranellucci
|
248ed8589a
|
Bugfix: error when concentric infill. #73
|
2011-11-28 22:52:35 +01:00 |
|
Alessandro Ranellucci
|
92e86a2259
|
Bugfix: plate was lifted even when retracting for Z change
|
2011-11-28 19:59:39 +01:00 |
|
Alessandro Ranellucci
|
3ad9ed74ae
|
New --solid-infill-feed-rate option. #68
|
2011-11-28 19:11:26 +01:00 |
|
Alessandro Ranellucci
|
975387d953
|
New --bridge-feed-rate option. #68
|
2011-11-28 18:37:53 +01:00 |
|
Alessandro Ranellucci
|
05dffad56f
|
Releasing 0.5.3
|
2011-11-27 10:33:36 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
22551b64de
|
Bugfix: a recent change broke all options having a zero value
|
2011-11-26 22:43:12 +01:00 |
|
Alessandro Ranellucci
|
7a5af293a8
|
Mark slow infill patterns as slow. #20
|
2011-11-26 22:41:23 +01:00 |
|
Alessandro Ranellucci
|
8ce2c23e52
|
Bugfix: hard errors when extrusion width was left empty.
|
2011-11-26 20:51:04 +01:00 |
|
Alessandro Ranellucci
|
2ce697f2b9
|
Releasing 0.5.2
|
2011-11-26 17:01:56 +01:00 |
|
Alessandro Ranellucci
|
8e7d00bb34
|
Avoid unnecessary retractions during infill. #29
|
2011-11-26 17:01:00 +01:00 |
|
Alessandro Ranellucci
|
72d7e1a5de
|
Don't update progress bar with wxWidgets 2.9.0 and 2.9.1
|
2011-11-26 16:52:10 +01:00 |
|
Alessandro Ranellucci
|
bed502af3c
|
Make the progress bar determinate and output status description. #31
|
2011-11-26 16:19:30 +01:00 |
|
Alessandro Ranellucci
|
951778439a
|
Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70
|
2011-11-26 15:21:15 +01:00 |
|
Alessandro Ranellucci
|
afd8e0a1bd
|
Bugfix: setting temperature to zero didn't remove it from output
|
2011-11-26 15:11:11 +01:00 |
|
Alessandro Ranellucci
|
0ab1fd4c19
|
concentric - new superfast infill pattern
|
2011-11-26 10:38:45 +01:00 |
|
Alessandro Ranellucci
|
f3b689d4e0
|
Bugfix: infill every 'n' layers was broken after recent changes
|
2011-11-25 18:16:31 +01:00 |
|
Alessandro Ranellucci
|
25c85aada5
|
Renamed "filament packing density" to "extrusion multiplier". Same values. #4
|
2011-11-25 11:15:20 +01:00 |
|
Alessandro Ranellucci
|
3c0ea0b57f
|
New --extrusion-width-ratio option. #8
|
2011-11-25 11:10:35 +01:00 |
|
Alessandro Ranellucci
|
465bef1748
|
Raising dev version to 0.5.2beta and updating MANIFEST
|
2011-11-24 14:24:01 +01:00 |
|
Alessandro Ranellucci
|
9005d5a98d
|
Preparing to release 0.5.1
|
2011-11-24 13:21:06 +01:00 |
|
Alessandro Ranellucci
|
47d347e1b2
|
Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
|
2011-11-24 12:53:09 +01:00 |
|
Alessandro Ranellucci
|
0ecfd68c10
|
Changed version number to 0.5.1beta
|
2011-11-23 14:22:21 +01:00 |
|
Alessandro Ranellucci
|
8598b66b0a
|
Large refactoring. Cleaner logic, smaller memory footprint.
|
2011-11-23 12:29:27 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
d13a0e2503
|
Bugfix: no top surfaces when they were too close to bridges
|
2011-11-22 21:45:05 +01:00 |
|
Alessandro Ranellucci
|
048410ac52
|
Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65
|
2011-11-22 20:35:05 +01:00 |
|
Alessandro Ranellucci
|
84d9f5fd9d
|
Bugfix: some regions near bridges were left blank. #58
|
2011-11-21 21:05:00 +01:00 |
|
Alessandro Ranellucci
|
36e1ea0caa
|
Make sure bridges don't overlap. #58
|
2011-11-21 16:35:10 +01:00 |
|
Alessandro Ranellucci
|
74786185e4
|
Don't die on non-manifold models, after having tried the slower detection algorithm too. #16
|
2011-11-21 16:09:13 +01:00 |
|
Alessandro Ranellucci
|
00beb7e118
|
Merge branch 'new-bridges'
|
2011-11-21 12:49:41 +01:00 |
|
Alessandro Ranellucci
|
d6ed9c6f34
|
Disable retraction when moving over infill space. #29
|
2011-11-21 12:37:12 +01:00 |
|
Alessandro Ranellucci
|
bde3c11e82
|
Fixes to the new bridging algorithm. It appears to be working fine now
|
2011-11-20 22:09:59 +01:00 |
|
Alessandro Ranellucci
|
ed9b4e829c
|
Add a M109 for temperature control
|
2011-11-19 17:37:04 +01:00 |
|
Alessandro Ranellucci
|
6e02c8f117
|
Renamed perimeter_offsets to perimeters
|
2011-11-19 17:36:44 +01:00 |
|
Alessandro Ranellucci
|
4a9fc942cb
|
Add a M109 for temperature control
|
2011-11-19 17:32:37 +01:00 |
|
Alessandro Ranellucci
|
4540f2377d
|
Some minor fixes for the new bridging logic #58
|
2011-11-19 17:31:00 +01:00 |
|
Alessandro Ranellucci
|
a1c766cc52
|
New bridging logic, more robust. #58
|
2011-11-19 16:44:24 +01:00 |
|
Alessandro Ranellucci
|
1ef4d006a0
|
Treating "reverse bridges" as bridges should not change the way they're infilled or the chosen flow width
|
2011-11-18 09:54:28 +01:00 |
|
Alessandro Ranellucci
|
1a066caecc
|
Compute bridge overlap as twice the total thickness of perimeters
|
2011-11-17 10:41:20 +01:00 |
|
Alessandro Ranellucci
|
c8ce989962
|
Renamed perimeter_offsets to perimeters
|
2011-11-17 10:38:23 +01:00 |
|
Alessandro Ranellucci
|
580f42c1de
|
Use the same bridging logic for "reverse bridges" (top surfaces)
|
2011-11-17 10:34:40 +01:00 |
|
Alessandro Ranellucci
|
8aca717209
|
Print solid infill without cutting an internal surface under small regions such as pillars. #39
|
2011-11-16 16:35:20 +01:00 |
|
Alessandro Ranellucci
|
47c0da8110
|
Bugfix: some solid layers were skipped. #47
|
2011-11-16 14:53:30 +01:00 |
|
Alessandro Ranellucci
|
9ab81880c9
|
Throw a fatal exception if no layers are detected
|
2011-11-16 10:26:47 +01:00 |
|
Alessandro Ranellucci
|
55f00fdb35
|
Little refactoring, removing useless methods
|
2011-11-16 10:16:01 +01:00 |
|
Alessandro Ranellucci
|
2abd8fe240
|
Bugfix: bottom layer speed settings were ignored.
|
2011-11-15 12:02:31 +01:00 |
|
Alessandro Ranellucci
|
e65349469b
|
Disable M104 if temperature is 0
|
2011-11-15 12:00:09 +01:00 |
|
Alessandro Ranellucci
|
9e42158582
|
Remove G92 E0 if --no-extrusion was supplied
|
2011-11-14 18:14:12 +01:00 |
|
Alessandro Ranellucci
|
e51310e1b0
|
Moved print settings to first tab
|
2011-11-14 17:21:44 +01:00 |
|
Alessandro Ranellucci
|
612b2e6ded
|
Slic3r::Fill::PlanePath was not explicitely included, puzzling the packager
|
2011-11-14 15:23:17 +01:00 |
|
Alessandro Ranellucci
|
8263a5d16d
|
Raise version to 0.5.0
|
2011-11-14 13:21:04 +01:00 |
|
Alessandro Ranellucci
|
c2a2d9ae6d
|
Combine Z changes and retractions using G0. #51
|
2011-11-14 12:45:20 +01:00 |
|
Alessandro Ranellucci
|
db35faeabb
|
New experimental --g0 option for fast retractions. #51
|
2011-11-14 12:15:32 +01:00 |
|
Alessandro Ranellucci
|
12b06b0ab0
|
Speed boost for new infill patterns. #20
|
2011-11-14 10:54:04 +01:00 |
|
Alessandro Ranellucci
|
86f3e4fcd2
|
Implemented a new "line" fill pattern. #20
|
2011-11-14 10:31:07 +01:00 |
|
Alessandro Ranellucci
|
d47a7bebbc
|
Display current version in GUI
|
2011-11-13 22:57:58 +01:00 |
|
Alessandro Ranellucci
|
60f6ce363e
|
GUI text boxes for start/end GCODE. #12
|
2011-11-13 22:48:21 +01:00 |
|
Alessandro Ranellucci
|
b2f0f85d96
|
Reorganized GUI with tabs
|
2011-11-13 22:22:34 +01:00 |
|
Alessandro Ranellucci
|
8f32ee8f5a
|
Bugfix: recent changes broke the "Infill every N layers" feature
|
2011-11-13 21:46:32 +01:00 |
|
Alessandro Ranellucci
|
ba1b59f54c
|
New --close-after-slicing option to allow for easy integration with Pronterface
|
2011-11-13 20:45:15 +01:00 |
|
Alessandro Ranellucci
|
a10d13120c
|
Better toolpaths for infills with different density
|
2011-11-13 20:22:44 +01:00 |
|
Alessandro Ranellucci
|
fe9ed84f64
|
Infill is now overlapped with perimeters by 15%. #19
|
2011-11-13 19:25:15 +01:00 |
|
Alessandro Ranellucci
|
75a71a23a5
|
New --first-layer-height-ratio option. #36
|
2011-11-13 19:08:19 +01:00 |
|
Alessandro Ranellucci
|
097b8d9acb
|
New --skirt-height option. #11
|
2011-11-13 18:41:12 +01:00 |
|
Alessandro Ranellucci
|
b123194522
|
New --no-extrusion option to disable E values
|
2011-11-13 18:26:31 +01:00 |
|
Alessandro Ranellucci
|
76dfda3b09
|
Comment for M104 was erroneously saying that it would wait for temperature. #49
|
2011-11-13 18:22:33 +01:00 |
|
Alessandro Ranellucci
|
a2b4f9f671
|
Use nozzle diameter as flow width when bridging
|
2011-11-13 18:21:25 +01:00 |
|
Alessandro Ranellucci
|
038caddcda
|
New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20
|
2011-11-13 18:14:02 +01:00 |
|
Alessandro Ranellucci
|
041e9877a3
|
Bugfix: parsing fatal error on Windows. #38
|
2011-11-12 11:57:22 +01:00 |
|
Alessandro Ranellucci
|
a13e4c6fb5
|
Detect membranes (solid parts generating both a bottom and a top surface on the same layers) and don't infill twice. #28
|
2011-11-12 11:05:32 +01:00 |
|
Alessandro Ranellucci
|
c5d5e4d244
|
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
|
2011-11-12 10:18:20 +01:00 |
|
Alessandro Ranellucci
|
fec816b065
|
Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring.
|
2011-11-11 10:21:48 +01:00 |
|
Alessandro Ranellucci
|
91e250a2fd
|
Infill solid layers even when --fill-density is set to zero. #37
|
2011-11-09 09:21:09 +01:00 |
|
Alessandro Ranellucci
|
80adbb7044
|
Support for legacy multiply options in config files. #7
|
2011-11-07 17:16:34 +01:00 |
|
Alessandro Ranellucci
|
0b42139e54
|
Print first layer at Z = 1 * layer_height instead of zero like it was until now. #17
|
2011-11-07 16:04:27 +01:00 |
|
Alessandro Ranellucci
|
b4e268efad
|
New --retract-lift option to lift Z while doing travel moves. #25
|
2011-11-07 15:58:47 +01:00 |
|
Alessandro Ranellucci
|
71a44e253c
|
Renamed "multiply" to "duplicate". #7
|
2011-11-07 15:49:07 +01:00 |
|
Alessandro Ranellucci
|
279bfbb10d
|
Organize perimeters with a nearest point search to avoid unnecessary travel moves. #21
|
2011-11-07 15:40:09 +01:00 |
|
Alessandro Ranellucci
|
e860254780
|
Do all perimeters for each island/object at once without moving between multiple objects. #34
|
2011-11-07 14:25:36 +01:00 |
|
Alessandro Ranellucci
|
d620b46beb
|
Bugfix: arcs now work (some glitches in detecting their center, though). #30
|
2011-11-07 14:12:07 +01:00 |
|
Alessandro Ranellucci
|
8172bcb772
|
Bugfix: G2/G3 I and J coordinates were wrong. #30
|
2011-11-06 20:24:42 +01:00 |
|
Alessandro Ranellucci
|
b5ca83abf8
|
Enforce the requirement for recent versions of Wx and Math::ConvexHull. #27
|
2011-11-05 18:19:35 +01:00 |
|
Alessandro Ranellucci
|
6d6533831e
|
New experimental --gcode-arcs options to generate G2/G3 commands. #23
|
2011-10-28 14:13:44 +02:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
54cc6216a1
|
Bugfix: extrusion distance wasn't reset at print start, causing a possible huge retraction.
|
2011-10-17 21:38:41 +02:00 |
|
Alessandro Ranellucci
|
5090ae561c
|
Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects
Large refactoring. Speed gains. Removed convex hull for bridges.
|
2011-10-15 21:14:13 +02:00 |
|
Alessandro Ranellucci
|
2d784fac9b
|
New --start-gcode and --end-gcode options. #12
|
2011-10-14 16:24:55 +02:00 |
|
Alessandro Ranellucci
|
f7335b6d1e
|
Bugfix: latest retraction changes broke retraction
|
2011-10-14 12:14:20 +02:00 |
|
Alessandro Ranellucci
|
56619871b2
|
Bugfix: some bridges had wrong perimeters inside
|
2011-10-13 22:22:45 +02:00 |
|
Alessandro Ranellucci
|
c97a89c07c
|
Refactored Line objects to arrayrefs
|
2011-10-12 16:27:40 +02:00 |
|
Alessandro Ranellucci
|
e410410dc7
|
Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.
|
2011-10-12 14:54:49 +02:00 |
|
Alessandro Ranellucci
|
774717c8bb
|
Implement our own STL relaxed parser to be tolerant with malformed STL files and remove a dependency
|
2011-10-12 10:47:26 +02:00 |
|
Alessandro Ranellucci
|
a65befe08c
|
Require Math::Clipper 1.02 otherwise fail with a hard error
This is to force people to upgrade their dependencies in order to avoid their previous bugs
|
2011-10-11 17:56:56 +02:00 |
|
Alessandro Ranellucci
|
82d8d0896f
|
Reset extrusion distance during retracts
|
2011-10-11 17:53:50 +02:00 |
|
Alessandro Ranellucci
|
ef485e511e
|
Remove useless F params to shrink gcode size (#14) and Reset E before exceeding 65535 (#13)
|
2011-10-11 16:04:50 +02:00 |
|
Alessandro Ranellucci
|
f01ddae974
|
Some compatibility bugs. Slic3r will still fail hard with non-manifold objects
|
2011-10-11 15:51:08 +02:00 |
|
Alessandro Ranellucci
|
bca3abb755
|
More fixes.
|
2011-10-10 17:27:00 +02:00 |
|
Alessandro Ranellucci
|
34681af6ae
|
Improvements for bottom and top surfaces perimeters
|
2011-10-10 16:31:37 +02:00 |
|
Alessandro Ranellucci
|
a7d5e643ae
|
Bugfix: couldn't set fill density to zero
|
2011-10-10 14:37:40 +02:00 |
|
Alessandro Ranellucci
|
332d55f854
|
Moved Temperature under filament options
|
2011-10-09 22:29:13 +02:00 |
|
Alessandro Ranellucci
|
84abd41cf4
|
Fixes for bridges
|
2011-10-09 22:18:06 +02:00 |
|
Alessandro Ranellucci
|
459577f9a2
|
Completely rewritten the slicing algorithm
It should work with any model now. There are still problems with some
bridges.
|
2011-10-09 19:47:21 +02:00 |
|
Alessandro Ranellucci
|
ad27f25c71
|
Skeining algorithm totally rewritten
|
2011-10-08 19:02:05 +02:00 |
|
Alessandro Ranellucci
|
3274f3978b
|
Additions to Geometry.pm and allow function exporting
|
2011-10-07 21:19:18 +02:00 |
|
Alessandro Ranellucci
|
743f2abcf2
|
Detection of optimal infill direction for bridges. Includes many fixes and improvements.
|
2011-10-07 19:07:57 +02:00 |
|
Alessandro Ranellucci
|
1cb515a8e5
|
Merge branch 'high-res-perimeters'
Conflicts:
lib/Slic3r/Extruder.pm
|
2011-10-06 20:09:50 +02:00 |
|
Alessandro Ranellucci
|
5daaf454b1
|
Faster algorithm for rectilinear fill
|
2011-10-06 17:13:42 +02:00 |
|
Alessandro Ranellucci
|
119eb0693f
|
New high_res_perimeters option (like the "Skin" plugin for Skeinforge)
|
2011-10-06 17:11:59 +02:00 |
|
Alessandro Ranellucci
|
1978a99416
|
Faster algorithm for rectilinear fill
|
2011-10-06 16:22:22 +02:00 |
|
Alessandro Ranellucci
|
33d7b8c7cf
|
Code refactored to allow for multiple infill types
|
2011-10-06 15:13:09 +02:00 |
|
Alessandro Ranellucci
|
bfd1d0e1dd
|
Got rid of Math::Geometry::Planar
|
2011-10-06 12:39:58 +02:00 |
|
Alessandro Ranellucci
|
e2d2574b8b
|
New algorithm for clipping lines to complex polygons
|
2011-10-06 12:20:25 +02:00 |
|
Alessandro Ranellucci
|
5812804d6b
|
Refactored the can_connect() logic (includes a refactoring of the SVG library)
|
2011-10-06 11:55:26 +02:00 |
|
Alessandro Ranellucci
|
5a07137def
|
Fixes to retraction and skirt
|
2011-10-05 21:25:17 +02:00 |
|
Alessandro Ranellucci
|
a1d518f1a2
|
Save and load configurations
|
2011-10-05 18:13:47 +02:00 |
|
Alessandro Ranellucci
|
92dec2db2a
|
Fixed detection of horizontal shells
|
2011-10-04 22:36:05 +02:00 |
|
Alessandro Ranellucci
|
2da5ee7448
|
Bugfixes and improvements in surface detection
|
2011-10-04 22:27:45 +02:00 |
|
Alessandro Ranellucci
|
f1a36502e1
|
Additions to the polygon library
|
2011-10-04 20:06:17 +02:00 |
|
Alessandro Ranellucci
|
706586f150
|
Allow .STL files as well as .stl
|
2011-10-04 18:00:01 +02:00 |
|
Alessandro Ranellucci
|
794b7a99d2
|
Fixes for hi-res STL models
|
2011-10-04 17:55:55 +02:00 |
|
Alessandro Ranellucci
|
6444c3d7a9
|
Bugfix in dealing with very small STL facets
|
2011-10-03 20:57:56 +02:00 |
|
Alessandro Ranellucci
|
ef201a99cc
|
Bugfix in polyline simplification
|
2011-10-03 20:40:49 +02:00 |
|
Alessandro Ranellucci
|
865e234a44
|
Workaround for Wx/GTK bug on Linux
|
2011-10-03 19:15:07 +02:00 |
|
Alessandro Ranellucci
|
71a373e437
|
Bugfix: error during skein freezed the GUI
|
2011-10-03 17:41:45 +02:00 |
|
Alessandro Ranellucci
|
558e86e72d
|
GUI fixes for Windows
|
2011-10-03 13:08:43 +02:00 |
|
Alessandro Ranellucci
|
f2f9178e07
|
GUI
|
2011-10-03 11:55:32 +02:00 |
|
Alessandro Ranellucci
|
21d287504c
|
New --perimeter-feed-rate and --retract-before-travel options. Includes some refactoring and fixes.
|
2011-10-02 09:57:37 +02:00 |
|
Alessandro Ranellucci
|
55f2247cd9
|
New extrusion math
|
2011-10-01 18:10:33 +02:00 |
|
Alessandro Ranellucci
|
ea88cad8e3
|
Don't extrude acute angles
|
2011-10-01 14:26:54 +02:00 |
|
Alessandro Ranellucci
|
25ea8a0204
|
Bugfixes for complex and dirty geometries
|
2011-09-30 15:46:48 +02:00 |
|
Alessandro Ranellucci
|
b61b543243
|
Minor cleanups
|
2011-09-26 19:53:01 +02:00 |
|
Alessandro Ranellucci
|
81085433fd
|
New options to multiply input object
|
2011-09-26 16:58:08 +02:00 |
|
Alessandro Ranellucci
|
c16ecb4316
|
Fixed regression which prevented horizontal shells to be processed for external top surfaces
|
2011-09-26 16:19:32 +02:00 |
|
Alessandro Ranellucci
|
404c76adc8
|
New option to rotate input object
|
2011-09-26 16:07:12 +02:00 |
|
Alessandro Ranellucci
|
8d13d4b21e
|
New option to shift Z coordinates
|
2011-09-26 15:59:03 +02:00 |
|
Alessandro Ranellucci
|
b0433097d4
|
New option to customize infill angle
|
2011-09-26 15:51:22 +02:00 |
|
Alessandro Ranellucci
|
742f646372
|
Minor fixes to time computation and right-hand rule
|
2011-09-26 15:08:05 +02:00 |
|
Alessandro Ranellucci
|
478047fad3
|
Fixes and improvements after testing with more complex objects
|
2011-09-26 14:48:22 +02:00 |
|
Alessandro Ranellucci
|
bfad101c8c
|
Ability to scale input object
|
2011-09-26 12:07:29 +02:00 |
|
Alessandro Ranellucci
|
c2a62891da
|
Remove features that are too small to be printed
|
2011-09-26 11:59:06 +02:00 |
|
Alessandro Ranellucci
|
081f65852d
|
Refactor extrusion logic in a dedicated class
|
2011-09-26 11:42:08 +02:00 |
|
Alessandro Ranellucci
|
415d1a5170
|
Optimization of travel paths for fills
|
2011-09-26 10:52:58 +02:00 |
|
Alessandro Ranellucci
|
0cd10441a1
|
Optimization of travel paths for perimeters
|
2011-09-25 23:15:45 +02:00 |
|
Alessandro Ranellucci
|
03341f3485
|
Multiple solid layers near external surfaces
|
2011-09-25 22:11:56 +02:00 |
|
Alessandro Ranellucci
|
f892fde123
|
Make rounded corners for skirt
|
2011-09-25 20:24:14 +02:00 |
|
Alessandro Ranellucci
|
5fec13353c
|
Use latest Math::Clipper updated to Clipper 4.4.4 to get sharp corners
|
2011-09-25 20:09:30 +02:00 |
|
Alessandro Ranellucci
|
f48dec9e41
|
Remove old code
|
2011-09-25 19:51:03 +02:00 |
|
Alessandro Ranellucci
|
18c7aef1a7
|
Lots of changes and refactoring after testing with hollow objects
|
2011-09-18 19:28:12 +02:00 |
|
Alessandro Ranellucci
|
26b05ab155
|
Replaced Moose with Moo => big performance boost and easier packaging
|
2011-09-06 11:50:43 +02:00 |
|
Alessandro Ranellucci
|
bf5824781d
|
Rearranged configuration options; removed --resolution (now hard-coded to 0.01mm) and --flow-width (now calculated using the new --nozzle-diameter)
|
2011-09-06 11:10:12 +02:00 |
|
Alessandro Ranellucci
|
3421e8fef8
|
Improvements to avoid blobs
|
2011-09-05 20:29:07 +02:00 |
|
Alessandro Ranellucci
|
ff5044c031
|
Implemented skirt
|
2011-09-05 20:00:59 +02:00 |
|
Alessandro Ranellucci
|
d8b848a67f
|
Implemented retraction and fixed extrusion math
|
2011-09-05 18:52:09 +02:00 |
|
Alessandro Ranellucci
|
5595839b31
|
Command line interface
|
2011-09-05 13:33:09 +02:00 |
|
Alessandro Ranellucci
|
778e4f6ffa
|
Allow for different speed on bottom layer
|
2011-09-05 12:22:54 +02:00 |
|
Alessandro Ranellucci
|
9e111d0a6d
|
Rectilinear fill
|
2011-09-05 12:21:27 +02:00 |
|
Alessandro Ranellucci
|
428006264d
|
Generate boundaries of areas to fill (includes some refactoring)
|
2011-09-04 12:04:01 +02:00 |
|
Alessandro Ranellucci
|
416ad241ea
|
Require at least one perimeter
|
2011-09-04 11:06:15 +02:00 |
|
Alessandro Ranellucci
|
a5ba0af7ef
|
Generate GCODE
|
2011-09-03 20:47:38 +02:00 |
|
Alessandro Ranellucci
|
74b4d8d612
|
Bugfix (harmless for now) in calculation of extents; using constants now for code readability
|
2011-09-03 20:08:48 +02:00 |
|
Alessandro Ranellucci
|
febd655e22
|
Extrusion of perimeters
|
2011-09-02 21:10:20 +02:00 |
|
Alessandro Ranellucci
|
55a523e1fa
|
Initial import
|
2011-09-01 21:06:28 +02:00 |
|