Vojtech Bubnik
7681eb8496
PrintRegion refactoring: Fixed a crash when an object is moved from outside
...
the print bed inside and it becomes printable.
2021-06-01 11:12:55 +02:00
Vojtech Bubnik
206bef7623
-fno-omit-frame-pointer disabled for Windows ASAN builds
2021-06-01 11:12:14 +02:00
Vojtech Bubnik
20ba7c0a1f
New parameter "Slicing Mode" for supporting 3DLabPrint airplane models.
...
S3D's strategy for merging self intersecting models is "Even / Odd"
which PrusaSlicer now supports as an alternative to "Positive" rule.
Also added a "Close Holes" option to fill in all internal structures.
3D-Labprint Models aren't sliceable (till years) #3062 #3708
2021-06-01 11:10:12 +02:00
rtyr
8e683aeb75
0.0.17 Updated start g-code. Added specific start g-code for straingauge printers.
...
Improved output filename format. Added filament profile.
2021-06-01 09:02:47 +02:00
rtyr
fdd5151a45
Version bumped to 0.0.17
2021-06-01 09:01:45 +02:00
rtyr
5841c92616
Merge pull request #6572 from pmjdebruijn/creality
...
CR6 series strain gauge start_gcode (#6527 )
2021-06-01 08:54:28 +02:00
enricoturri1966
1d4f7a8870
Changed logic to avoid saving a project while a gizmo is in editing mode
2021-06-01 08:32:58 +02:00
Lukas Matena
580dc890b8
Wipe tower: use normal retraction when moving to the tower, not toolchange retraction
...
This does not make sense, there is always an unretraction when the head arrives at the tower.
2021-05-31 21:23:03 +02:00
Lukas Matena
413bce49fc
Merge branch 'lm_separate_travel_speed_z'
2021-05-31 21:22:17 +02:00
Lukas Matena
4657e0d670
Improvement related to 'separate z travel speed':
...
default to zero = use good old travel speed. This is to
ensure backwards compatibility with existing profiles
2021-05-31 21:21:53 +02:00
Martin Budden
bd6badf123
Added option to independently set z axis travel speed
2021-05-31 21:20:43 +02:00
Pascal de Bruijn
3abc0b84a4
creality.ini: straingauge start_gcode wait for bed temp to settle as well
...
given this applies to a larger bed printer as well (CR-6 Max).
2021-05-31 20:00:41 +02:00
Vojtech Bubnik
df87f1b929
Fixed some compiler warnings
2021-05-31 14:48:26 +02:00
Lukáš Hejl
660acede9e
Sphere brush color in MMU painting gizmo is now the same as color used for painting.
2021-05-31 14:23:12 +02:00
Vojtech Bubnik
033d9f3a5e
Merge remote-tracking branch 'remotes/origin/master' into vb_print_regions
2021-05-31 14:05:53 +02:00
Vojtech Bubnik
8c95212aae
Bugfix of PrintRegion refactoring: Correct invalidation of regions
...
on object transformation.
2021-05-31 14:04:45 +02:00
enricoturri1966
e1f2336b8e
Merge remote-tracking branch 'origin/et_sequential_limits'
2021-05-31 12:56:18 +02:00
enricoturri1966
54b69ea9e5
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sequential_limits
2021-05-31 12:55:03 +02:00
enricoturri1966
f0354b43c1
Fixed conflicts after merge with master + fixed rendering of hovered gizmo grabbers
2021-05-31 12:54:48 +02:00
Lukas Matena
b30a6d5883
Unify Delete/Backspace behaviour in gizmos with the rest of slicer. Also,
...
backspace on macOS in SLA gizmo now deletes points and not the whole object,
which was quite unexpected.
2021-05-31 11:50:00 +02:00
Lukas Matena
0d721bfb07
Slightly reworded 'missing layers' warning, to reflect that it is no longer considered an error
2021-05-31 11:16:28 +02:00
Lukáš Hejl
2438e3a891
Fixed issue that the lower half of the object was shown darker than the upper half of the object after slicing with MMU segmentation.
2021-05-31 07:26:38 +02:00
Pascal de Bruijn
166790c49e
creality.ini: fix new placeholder syntax
2021-05-30 20:37:02 +02:00
Pascal de Bruijn
ddb556db66
creality.ini: internal start_gcode consistency improvements
2021-05-30 17:55:18 +02:00
Pascal de Bruijn
a934960c00
creality: special start_gcode for straingauge printers
2021-05-30 17:48:54 +02:00
Pascal de Bruijn
3a445c99fb
creality.ini: use 150C during ABL again
...
initially ABL temp was lowered to 120C for straingauge ABL (G29), but since
we're no longer doing ABL on each print for straingauge printers like the CR6
series, we can raise the temp a little again
2021-05-30 17:33:58 +02:00
Lukáš Hejl
02a0955a5f
Fixed possible wrongly filled ZIP headers in case that pState->m_zip64 is sets to true.
2021-05-29 19:56:20 +02:00
Lukáš Hejl
7f29647d67
Added missing includes (GCC 11.1)
2021-05-29 19:55:20 +02:00
Lukáš Hejl
2cbf7728bb
Fixed that seed fill left all triangles split instead of merging them.
2021-05-28 17:42:28 +02:00
Lukáš Hejl
726a48383f
Cleaned up of 0a6490bab9
2021-05-28 17:36:56 +02:00
Lukas Matena
3cb8232e81
Merge branch 'lm_libglu_eradication_rebased'
2021-05-28 16:44:45 +02:00
Lukas Matena
8c560522a3
Fixed rendering of gizmo grabbers
2021-05-28 16:44:13 +02:00
enricoturri1966
e1d5d0804b
Added missing uniform calls for emission_factor
2021-05-28 16:44:13 +02:00
enricoturri1966
f69bd75464
Fixed rendering of gizmos' grabbers
2021-05-28 16:44:13 +02:00
enricoturri1966
9605d10caa
Unified color definition
2021-05-28 16:44:13 +02:00
enricoturri1966
e648368934
Removed unneeded calls to GL_LIGHTING
2021-05-28 16:44:13 +02:00
enricoturri1966
b63de990d4
Removed static members from GLGizmoBase and GLGizmoBase::Grabber to fix OpenGL error when closing the application
2021-05-28 16:44:13 +02:00
Lukas Matena
2e24e689fa
Grabbers and support points appearence tweaking, some refactoring
2021-05-28 16:44:13 +02:00
Lukas Matena
846afdf7f3
Removed last GLU call, removed libGLU from CMakeLists
2021-05-28 16:44:13 +02:00
Lukas Matena
fd024eadcd
Removed gluProject and gluUnProject calls
2021-05-28 16:44:13 +02:00
Lukas Matena
97b7ef7dc0
Removed GLU calls from all the gizmos
2021-05-28 16:44:13 +02:00
enricoturri1966
0c7095d807
Fixed crash when deleting last obejct from plater
2021-05-28 16:28:56 +02:00
Vojtech Bubnik
f5c7d14e85
Bugfix after refactoring of PrintRegions: Fixed handling of cached_volume_ids
2021-05-28 15:55:18 +02:00
Vojtech Bubnik
fe96a20b50
Fixed compilation on GCC
2021-05-28 15:22:00 +02:00
Vojtech Bubnik
7d3b2b5b6e
Merge branch 'vb_print_regions' of https://github.com/Prusa3d/PrusaSlicer into vb_print_regions
2021-05-28 15:14:41 +02:00
Vojtech Bubnik
c02f95dfd6
Bugfixes after PrintRegion refactoring.
2021-05-28 15:14:34 +02:00
YuSanka
8e1cde43a6
Update extruder show/hide and default extruder color in respect to the volume type
2021-05-28 13:41:36 +02:00
Lukáš Hejl
0a6490bab9
Added cancellation to MMU segmentation.
2021-05-28 05:57:32 +02:00
Lukáš Hejl
281ac1f2f1
Added missing includes (GCC 9.3)
2021-05-27 16:47:31 +02:00
Vojtech Bubnik
3e28b4c967
Fix of previous commit
2021-05-27 16:14:54 +02:00
