of the Z coordinate, compiled in the ClipperLib_Z namespace.
Update of Lukas's new brim clipping:
All the brim contours are now clipped by the ClipperLib_Z library
in one shot.
to avoid layers thinner than min_layer height, and possibly due to
the fact, that empty support extrusions may get generated
for support layers with non-empty support polygons.
Fix of Empty layers detection added to GCode.cpp (6ab1cec)
Iterator loops replaced with C++11 loops.
Fixed clone() methods to return an ExtrusionEntity*.
PerimeterGenerator now uses move semantics on ExtrusionEntity a little
bit more.
All requested config values are written into SL1 ini file inside the zip
* TIme.hpp and Time.cpp is now part of libslic3r instead of libslic3r_gui
* Updated time manipulation function: separate timestamp_local_str and timestamp_utc_str
* timestamp_utc_str is used in header_slic3r_generated(). Gcode now contains UTC timestamps
The gap fill was disabled for zero infill.
Now the gap fill is enabled in between the perimeters, but disabled between
the inner-most perimeter and infill in case the infill is set to zero.
Also in case there are multiple infill regions inside a perimeter,
the mutliple infills are considered as non-zero if at least one infill
is non-zero, therefore the gap fill will be added inside the inner-most
perimeter.
In case there were empty object layers supposed to be floating on supports which were set to use a specific extruder, wipe tower was missing layer required to do the toolchange, leading to a crash
Such cases are now detected and layers that need it are additionally assigned as wipe tower layers
Also tracked as SPE-526
This can happen if the user enters invalid toolchange through the custom gcodes
Such toolchange is now simply ignored by the CoolingBuffer, exporting gcode is NOT stopped, a log error is emitted
The very first slicing step needs to be invalidated if support is
enabled or disabled while the soluble supports are configured,
as the bridging is disabled for soluble supports, while the bridging
is enabled with supports disabled.
If the custom toolchange gcode switches extruder to the one that is expected, PrusaSlicer does not issue its own T command
Otherwise, this command is inserted just after the custom gcode, even in case it is not empty
This should prevent issues such as #2884 and #2886 from being reported
Fix of "Bridging infill not connecting with infill set to 0%" #1301
Top, bottom and bridging areas are extended into infill as long
as the infill is not zero. If the infill is zero,
top, bottom and bridging areas wound not expand into these "void" areas.
With this commit, the top, bottom and bridging areas are allowed to expand
into the "void" areas as long as these "void" areas are supported below
with perimeters or some other non-empty infill, and slightly beyond
these supporting areas into the voids (currently hard coded to 1mm).
- added an extra travel move after a toolchange
- wipe tower only sets temperatures with single extruder MM printers
- ooze prevention does not work with the wipe tower - added a check into Print::validate()
WARNING -> After this commit the exported gcode will contain the extra lines used by the time estimator. They will be removed by a future commit when a new post-process method will be implemented.
atomically. The code was taken from the llvm project, it is complex
and hopefully it covers all the Windows file system quirks. Vojtech
has highest hopes, that this will fix the various PrusaSlicer.ini
file corruptions.
Enabled the locales switching and error handling on Linux as well,
where now the missing locales are reported and running the locale-gen
tool is recommended.
Function set_extruder can be called before moving to the first layer, m_layer_index is then -1. We definitely don't want to set temperature for second layer in that case.
Source files are checked using a small utility in src/build-utils
This is done to prevent bugs in build and localization caused
by weird non-UTF-8 encodings interpreted by MSVC in terms of local codepages
rather than UTF-8.
A static symbol Slic3r::SEMVER is introduced, which holds
the running slicer's Semver object.
This is mainly done to make testing updater behaviour
_much_ easier. Additionaly to cleanup some questionable code
(Semver was being parsed multiple times / in multiple places
in the frontend.)
Since the value inserted from the keyboard or clipboard is not updated under OSX,
we forcibly set the input value for SpinControl every time during editing.
Thus we can't set min control value bigger then 0.
Otherwise, it couldn't be possible to input from keyboard value less then min_val.
Linear advance is reset by filament start gcode after a toolchange. However, not all moves to the wipe tower
end with a toolchange (brim, empty grid) and it would therefore disable linear advance until the next toolchange
This should solve https://github.com/prusa3d/PrusaSlicer/issues/2770
Changed messagebox text after changing extruder diameter with single extruder printers so it is more obvious why it shows
In case nozzle diameters differ and someone checks 'single_extruder_mm', PrusaSlicer asks whether all diameters should be unified. Answering NO did not undo the SEMM check. It does now.
The initial priming now does not assume anything about bed width and always uses the space it has
In case of circular beds it places the priming lines along the diameter
Custom beds are not supported (they are treated as circular with no extra checks whether it is sane)
Slight refactoring of the WipeTower class (constructor now gets reference to PrintConfig and not the individual values, same with set_extruder). This was legacy from times when the wipe tower was meant to be abstract and independent on the rest)
Reported in https://github.com/prusa3d/PrusaSlicer/issues/2752 and was a result of setting support contact z distance to negative value.
This lowered the maximum allowed print_z of the next layer, even though previous layer had object layers too, so the penalty from the contact z should not have been applied.
Fixed simply by rejecting the negative contact_z.
when parsing localized file names by the PlaceholderParser:
UTF8 characters were handled as chars, and the negative char values were
used as indices into 7bit long tables.
used for Perl unit / integration tests only. With this commit,
the code will be cleaner, but likely the unit tests will not run
on Windows, if installed in a localized path.
That could happen on empty support layers which do not necessarily matter, since their spacing is not generally synchronized with the object
The new hopefully correct logic is "if there are extrusions on a layer, check that last layer with extrusions is at most the new layer height below
This is a fixup of changes from 0de6e53 and 6ab1cec
for the GLVolumes before sending to the GPU driver. The following commits
were partially reverted:
4269c8b23c Removed GLVolume non-VBO rendering
d15698e21e GLVolume and GLIndexedVertexArray refactored to send data to gpu at the first render call
Namely, the GLVolume buffers are "shrink to size"'d before sending their
content to the OpenGL driver, and the vertex buffers are populated
as quickly as possible from the GLVolume, so that the same buffer is not
kept twice in RAM on systems, where the RAM is shared with the graphics
card.
Also the memory allocation reporting was improved for the GLVolumes.
