3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,516 Commits 1 Branch 1 Tag 249 MiB
888a904c9b
Commit Graph

3232 Commits

Author SHA1 Message Date
bubnikv
38cb2842ac support_material_synchronize_layers implementation 2016-11-30 16:06:12 +01:00
bubnikv
556204fddc support_material_synchronize_layers configuration value 
for synchronization of object layers with print layers.
 2016-11-30 16:04:15 +01:00
bubnikv
695c92fb00 CLIPPER_OFFSET_SCALE was made a power of two, the scaling functions 
inside ClipperUtils are now using bit shifts instead of multiplication
by doubles, which makes the scaling precise.

Removed the scale parameter from all offset functions.

Modified the safety offset to calculate offset per polygon instead
of over all polygons at once. The old way was not safe and very slow,
sometimes this meant a kiss of death for supports for example.
 2016-11-28 17:33:17 +01:00
bubnikv
0d20a81354 Log support through boost::log 2016-11-24 13:44:51 +01:00
bubnikv
a069c41b20 On Windows, load the icon either from the exe, or fron the ico file. 2016-11-20 14:22:26 +01:00
bubnikv
79f5a16536 Reverted the perimeter generator to not save the perimeter areas. 
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.

Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
 2016-11-17 23:22:59 +01:00
bubnikv
50f06a0fe8 Increased the gimbal lock threshold to 170 degrees from 150 degrees. 
This makes it possible to look at the bottom of an object.
 2016-11-16 09:24:27 +01:00
bubnikv
7f1704b2ac Disabled live preview by default as it is not stable and/or the calculation takes too long for interactive usage. 2016-11-13 23:35:56 +01:00
bubnikv
1070f0c0af New feature: Propose to enable "detect bridging perimeters" 
when the supports are first enabled. Don't check keep asking,
if the user does not want the bridging perimeters to be enabled.
 2016-11-11 15:05:39 +01:00
bubnikv
f4ee87ba24 Fixed https://github.com/prusa3d/Slic3r/issues/27 2016-11-11 12:00:40 +01:00
bubnikv
4460b5ce50 re-wrote PrintObject::detect_surfaces_type() to C++, 
Fixed some cracks in the fill surfaces created by rounding all surfaces inside detect_surface_type().

Fixed https://github.com/prusa3d/Slic3r/issues/12
Bridging-Angle not optimal

Extended the "Ensure veritcal wall thickness" mode (merged with the original discover_horizontal_shells function), but this a work in progress. Already Slic3r with "ensure vertical wall thickness" produces less spurious infills inside solids.
 2016-11-10 19:23:01 +01:00
bubnikv
eb0ab38618 Fixes https://github.com/prusa3d/Slic3r/issues/26 
Strange behavior of Extra perimeters and ensure wall thickness
Old behavior is re-enabled when ensure vertical wall thickness is off.
 2016-11-09 10:24:45 +01:00
bubnikv
e15b5f4587 Fix of https://github.com/prusa3d/Slic3r/issues/16 
Crashes while switching in preview through layers with arrow keys

Also added a check box to visualize a single layer only
in the 3D path view. The check box may be toggled with a 'S' key.

Added shift+U / shift+D buttons in the 3D path view to show a single
layer only.
 2016-11-08 17:13:16 +01:00
bubnikv
b8590180d8 Fix of https://github.com/prusa3d/Slic3r/issues/20 
Slicing preview incorrect in terms of visible solid layers
 2016-11-08 15:33:13 +01:00
bubnikv
bfb336df0c Refactored Print::validate() method to not throw an exception, but 
to return a string with an error message instead. This was necessary
to avoid a hang-up on some Strawberry Perl distributions, when
a perl "croak" function is called after a C++ exception is caught.
 2016-11-05 02:23:46 +01:00
bubnikv
6217622865 Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/11 
Replaced eval { die } construct with a bool return value indicating
success or failure of an automatic arrangement of parts on the print bed.

Don't know exactly what is happening here, but throwing a "die" inside
a XS function and then catching it inside an eval {} block is suspcious.
 2016-11-04 15:03:51 +01:00
bubnikv
12b7818caa Only call wxWidgets method wxApp::SetAppDisplayName for wxWidgets 3.0 
and newer.
 2016-11-03 09:15:30 +01:00
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
3d3654707b Added "Notes" page to the filament configuration. 
Added "filament_max_volumetric_speed", a cap on the maximum volumetric
extrusion role, filament specific. This is very useful when mixing
rigid filament with a soft filament.

Extended the import / export of multi-string values into configuration
values, including the test cases. Multi-line strings will be enclosed
into quotes, quotes escaped using a C-style escape sequences. Single
word strings could still be stored without quotes.
 2016-11-01 13:41:24 +01:00
bubnikv
34fab1566f "Background slice now" function, initial implementation by @lordofhyphens 
https://github.com/alexrj/Slic3r/pull/3501
 2016-10-25 13:24:42 +02:00
bubnikv
34248c2fbf On Windows use the Slic3r.ico instead of the PNG file 
for the application icon.
 2016-10-24 18:05:26 +02:00
bubnikv
51c8d73b11 Fixed a division by zero in 3D scene, if there is nothing to show. 
Improved Prusa3D icon.
 2016-10-24 17:32:22 +02:00
bubnikv
741a85187c Suppress the '- default -' selection of Print/Filament/Printer settings 
if there is any valid option available. This feature has been asked for
by the Prusa3D customers as the '- default -' option has nothing to do
with the actual printer and when selected accidentally, it could even
lead to a printer damage.
 2016-10-24 16:07:36 +02:00
bubnikv
250ff451ba by alexrj: Fixes in GCodeSender to reset the connection after it breaks. 
by alexrj: Fix in mouse handling of 2DBed.
by alexrj: ClipperUtils for ExPolygon vs. ExPolygon
 2016-10-24 14:07:38 +02:00
bubnikv
1fb57e439e Defined the +-* operators on Pointf. 
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
 2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66 Unified the creation of paths of debugging output files 
pointing to a predefined output directory.
 2016-10-21 10:18:01 +02:00
bubnikv
9e4edcd8ec Enabled the C++ fillers for all infills, not just the supports. 
Made sure the C++ fillers are instantiated at the worker threads,
where there are being released.
Extended the FillRectilinear2 to calculate the contour / line intersection
with exact arithmetics, improved robustness and added error handling
and error reporting, if the contours to be filled are not correct.
 2016-10-20 17:44:46 +02:00
bubnikv
53907a9cfe Fix of a crash when setting a viewport over an empty platter. 
Exported bounding box 'empty' method to perl.
 2016-10-18 16:44:05 +02:00
bubnikv
c0956dbd34 Disable debugging output from the Filler2.pm 2016-10-17 17:16:02 +02:00
bubnikv
47cc9687a0 Added a new switch: ensure_vertical_shell_thickness 
This enables a zig-zag infill similar to Cura or Simplify3D
on overhangs.
 2016-10-16 22:11:19 +02:00
bubnikv
7d7f093120 C++ supports sketched, but not finalized yet. Slic3r is still using 
the old Perl supports, but this time with the C++ fillers.
 2016-10-16 16:30:56 +02:00
bubnikv
ee4b9ab82f Select standard camera views (left / right / top / bottom / front / rear / default) 
by menu.
 2016-10-05 14:13:07 +02:00
bubnikv
5268574ade Made the sheath around the base support configurable. Without the sheath 
it is easier to remove the support, but the support is more fragile.
 2016-10-04 14:38:13 +02:00
bubnikv
5bb37ad2c4 A new feature "support_material_buildplate_only" implemented. 
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
 2016-10-04 13:54:10 +02:00
bubnikv
ae2bae137a Added a low layer slider into the 3D preview window. 
This is to limit the preview to a span of layers.
 2016-10-03 17:01:29 +02:00
bubnikv
b7af7276c9 Instantiate the new C++ filler. It will be used for the supports first. 2016-10-03 16:59:00 +02:00
bubnikv
403329db49 Misc bugfixes. 2016-09-26 13:58:47 +02:00
bubnikv
790b640521 Visualization of fill surfaces. 2016-09-26 13:56:24 +02:00
bubnikv
8f04f5d5f6 Don't adjust width of infill. It produces dangerously wide fills. 
If the infill flow adjustment is enabled, report cases,
where the infill flow grows over the limits.
Make the internal bridging infill 50% sparse.
 2016-09-26 13:38:37 +02:00
bubnikv
6950ce3bcf Report when the threading is disabled and when the debugging output 
is enabled.

Two new environment variables are respected:
SLIC3R_SINGLETHREADED and SLIC3R_DEBUGOUT.
 2016-09-26 12:57:15 +02:00
bubnikv
a506030082 Draft of a 3D toolpaths preview. 2016-09-26 12:38:29 +02:00
bubnikv
565146d9d1 Fix of a spiral vase with realtive extruder distances enabled. 
The clone function is used by the SpiralVase.pm only, so the change
is safe.
 2016-09-23 12:59:20 +02:00
bubnikv
6e97b9bb73 Optimization of the layer offsets in 3D visualization. 2016-09-15 12:26:53 +02:00
bubnikv
a53bd3dfe9 Generate multiple vertex lists rather than requesting a single huge 
memory block.
 2016-09-15 00:06:42 +02:00
bubnikv
2a5095a1ea OpenGL support through GLEW. Only active if compiled with SLIC3R_GUI=1. 2016-09-14 16:31:26 +02:00
bubnikv
4c67230436 Documented the purpose of various perl modules. 2016-09-14 11:22:41 +02:00
bubnikv
55218c8c4d Documented. 
Fixed rough Z buffer quantization issues with ortographic camera.
Initial implementation of a perspective camera.
 2016-09-14 09:38:59 +02:00
bubnikv
15c1edd552 Configurable volumetric extrusion rate slope. 2016-09-13 15:02:28 +02:00
bubnikv
b2a6f43923 Documented perl modules. 2016-09-13 11:24:55 +02:00
bubnikv
6dfe4c0b96 Debugging code: Storing the test STLs inlined in the Perl code into a file. 2016-09-13 09:48:29 +02:00
bubnikv
f518e0675c Initial commit of the new Pressure Equalizer, the EdgeGrid 
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
 2016-09-12 16:25:15 +02:00
bubnikv
9a83d4e8d5 Reverted some now unnecessary changes. Reverted the infill to the original perl implementation. 2016-09-12 13:26:17 +02:00
bubnikv
9fcc8fe9ae Meged with release_candidate_1_3 2016-09-12 11:29:39 +02:00
bubnikv
ca98e2655a New command line option: --dont-arrange 
Don't arrange the objects on the build plate. The model coordinates
define the absolute positions on the build plate.
The option --print-center will be ignored.

Also there is a fix in the command line invocation of --duplicate-grid
so it will run, but still there is something broken there and the results
are not correct.
 2016-09-05 11:32:58 +02:00
Vojtech Bubnik
7649a1df41 Merge branch 'master' of https://github.com/alexrj/Slic3r into release_candidate_1_3 2016-06-03 17:45:05 +02:00
bubnikv
e0b9865386 Fix of a crash when the Print Bed dialog is reopened after the bed shape 
was defined with an STL.
Fix of rendering on Windows, refresh on resize.
 2016-06-03 17:21:47 +02:00
bubnikv
ef0d22be30 2D platter rendering fixed on Windows, and the background color fixed 
on Linux/GTK.
 2016-06-03 15:23:03 +02:00
bubnikv
62b440ff6c Fixes a performance issues on Windows, where the cut is being 
refreshed many times for a single move of the Z plane.

Fixes a problem on Windows, where the new wxWidgets always returned
Cancel, even if the window was closed with the "Cut" button.

Improved performance if the live preview is disabled or not needed,
because both top and bottom parts shall be displayed.
 2016-06-03 10:35:39 +02:00
bubnikv
5573faec6b Moved the Bonjour discovery to Tab.pm, 
when no Bonjour devices found, a simple message box is shown.
Otherwise the Bonjour selection dialog with an empty list crashes on windows.
 2016-06-03 09:36:23 +02:00
bubnikv
bb9c3dd9ce Fix of git #3293: More efficient GCode export 
This fixes two problems of repeatedly copying data from the C++ layer
to perl, by factoring the copying out of an inner loop.
 2016-06-01 20:58:05 +02:00
Alessandro Ranellucci
2a8c139ca4 Add XYZ homing button to printer manual control 2016-05-31 15:02:56 +02:00
Alessandro Ranellucci
30f6e4b16f Bugfix: homing was not correctly saved 2016-05-31 15:02:55 +02:00
bubnikv
ab9e3b718c Support multi sampled anti-aliasing with wxWidgets 3.0.3. 2016-05-27 23:38:45 +02:00
Joseph Lenox
f2e8c6f3bd Merge pull request #3262 from hyperair/fix-autospeed-F0-moves 
Don't use equality comparisons for floats
 2016-05-18 22:07:34 -05:00
bubnikv
d8be976356 The "controller" tab and the settings of the USB/serial connection was 
made configurable. Now one may hide the "controller" tab and the USB/serial
connection configuration from the preferences. This is useful for someone,
who never connects his printer to the computer by a cable.
 2016-05-16 23:57:53 +02:00
Vojtech Bubnik
d022493297 Merge remote-tracking branch 'upstream/master' 2016-05-03 22:05:31 +02:00
bubnikv
3a0172888a Adapted to the new infills. 2016-04-15 17:54:47 +02:00
bubnikv
ab5e01d114 Adapted to the new infills. 
New infills process a not yet shrunk expolygon.
 2016-04-15 17:51:11 +02:00
bubnikv
f767ce816b Optimized and improved rectilinear fill. 2016-04-13 20:45:44 +02:00
bubnikv
3ba625da22 Revert incorrect checkins. 2016-04-11 17:34:15 +02:00
bubnikv
7da68c91a5 Vojtech likes to use Sublime on Windows to get the wheels rolling. 2016-04-11 17:05:58 +02:00
Chow Loong Jin
2e2e4e68d3 Fix layer time slowdown 
The recent GCode writer changes which put the speed changes on a line of
their own have caused the layer time slowdown to be ignored by the regex
in CoolingBuffer.pm.

Fixes: #3134
 2016-04-10 16:10:18 +08:00
Alessandro Ranellucci
82b07a02fa One more year 2016-04-09 19:11:50 +02:00
Alessandro Ranellucci
f006e66549 Refactored calls to Wx::Bitmap->new 2016-04-09 19:10:57 +02:00
Alessandro Ranellucci
412a862677 Fixed dragging in 3D plater having some glitches with multipart objects 2016-03-19 22:31:07 +01:00
Alessandro Ranellucci
dd879c3ef2 When loading an AMF file having multiple objects that look like multiple parts of a single object, prompt user and ask how to consider it. #2970 
Conflicts:

	lib/Slic3r/Model.pm
 2016-03-19 22:24:20 +01:00
Alessandro Ranellucci
5ff7511a14 Fixed regression in bridging caused by error in porting. Includes regression test. #3175 2016-03-18 22:40:29 +01:00
Alessandro Ranellucci
e2aae39f15 Bugfix: crash when input to bed shape options was '-'. #3254 2016-03-18 01:15:52 +01:00
Alessandro Ranellucci
1a09ae81db Merge pull request #3166 from hippich/pk-fix-about-screen 
Fix Slic3r crash when opening About dialog
 2016-03-14 00:17:13 +01:00
Alessandro Ranellucci
0964700e6d Merge pull request #3209 from hyperair/fix-3046 
Don't toggle support_material_enforce_layers field
 2016-03-13 18:30:22 +01:00
Alessandro Ranellucci
4fad87e438 Fixed float comparison in combine_infill 2016-03-13 12:24:03 +01:00
Chow Loong Jin
5f8eea9adf Don't use equality comparisons for floats 
This fixes an issue where F0 moves arise from 0-width (or 0 layer
height?) support material segments when using autospeed.

Fixes: #3261
 2016-03-08 08:28:30 +08:00
Alessandro Ranellucci
a32937cef2 Refactoring: new Layer::make_fill() method 2016-02-20 20:51:07 +01:00
Alessandro Ranellucci
e72a89ec23 New icon for Infill (credits: Carlo Mariella) 2016-02-20 16:18:48 +01:00
Chow Loong Jin
a9c5874db3 Don't toggle support_material_enforce_layers field 
support_material_enforce_layers works independently of the support_material ||
raft options, so we should not disable the field when support material
generation is disabled.

Fixes: #3046
 2016-01-17 17:12:47 +08:00
Pavel Karoukin
571b406bd6 @farhaven: There's one more wxCLOSE in lib/Slic3r/GUI/Projector.pm, that one should probably be changed as well. 2015-12-27 11:26:11 -06:00
Alessandro Ranellucci
f5326c393a Revert "Implement resizable left column in preset editor. #3151" 
This reverts commit 4b30d67e54.
 2015-12-25 17:52:10 +01:00
Alessandro Ranellucci
7c8b71012c Force the 'nearest' strategy for starting skirt loops 2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
1a286fc906 Fixes and improvements to MotionPlanner, much smarter now 2015-12-21 14:46:35 +01:00
Alessandro Ranellucci
f7e97f7e9b Refactor cutting logic, don't slice in 3DScene 2015-12-19 23:15:37 +01:00
Alessandro Ranellucci
025a508de2 Ignore cut result if user didn't click the cut button 2015-12-19 20:41:47 +01:00
Alessandro Ranellucci
6e231a8cae Editable text control for specifying the cut Z in cut dialog 2015-12-19 20:38:50 +01:00
Alessandro Ranellucci
70e8db8a0a Minor code cleanup here and there 2015-12-19 20:27:04 +01:00
Pavel Karoukin
4f32a1cf9d Fix Slic3r crash when opening About dialog 2015-12-19 10:47:15 -06:00
Alessandro Ranellucci
9dc0514844 Use bridge flow and speed for solid_infill_every_layers 2015-12-19 12:48:48 +01:00
Alessandro Ranellucci
4b30d67e54 Implement resizable left column in preset editor. #3151 2015-12-18 20:00:22 +01:00
Alessandro Ranellucci
8138fbf349 New --retract-lift-above and --retract-lift-below options. #763 #3057 2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
44825d91af Some changes to DLP projector 2015-12-18 00:56:56 +01:00
Alessandro Ranellucci
d0ad57b64d Don't show any dialog if 0 configs were imported 2015-12-17 18:48:50 +01:00
Alessandro Ranellucci
3c862836f2 Refactored the Config XS bindings 2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
c73378744f Prevent flickering 2015-12-15 17:10:10 +01:00
Alessandro Ranellucci
7ecfe195f7 Live preview in the cut dialog 2015-12-14 00:15:26 +01:00
Alessandro Ranellucci
37d0558873 Move the position_screen method to the Screen class 2015-12-11 01:18:02 +01:00
Alessandro Ranellucci
9bd10b3b5e Updates to GUI projector: fix buttons not updating when print finished; ring a bell at that time; disable screensaver not just when printing but until the DLP projector window gets closed 2015-12-11 01:13:47 +01:00
Alessandro Ranellucci
32a333f16a Import config bundle automatically if found in application directory 2015-12-07 12:17:06 +01:00
Alessandro Ranellucci
c16cdb9d85 Preserve the current layer when refreshing the 3D preview 2015-12-05 23:22:50 +01:00
Alessandro Ranellucci
a8091e41a0 Fix a minor glitch with scrollbars in OverrideSettingsPanel 2015-12-05 23:14:13 +01:00
Alessandro Ranellucci
50b52367a2 New "Scale to size" command(s). #2711 2015-12-05 19:37:57 +01:00
Alessandro Ranellucci
abff77cf04 Add color icons to menu items about axes. #3121 2015-12-05 19:01:17 +01:00
Alessandro Ranellucci
e2b203ba8d Disable screensaver while projecting (untested on Windows) 2015-12-04 21:25:45 +01:00
Alessandro Ranellucci
366b364996 Improvements to DLP projector: disable all options while printing; apply config changes to the printer preset so that user can save them; show total and remaining print time 2015-12-04 18:52:53 +01:00
Alessandro Ranellucci
4f8a18bbad Ported Layer::maker_perimeters() to XS 2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
3a9cf91f83 Ported a couple more methods to XS 2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
ed75219215 Ported mode Model methods to XS 2015-12-02 18:06:18 +01:00
Alessandro Ranellucci
dfce3a3138 Ported _arrange() and arrange_object() to XS 2015-12-01 21:51:16 +01:00
Alessandro Ranellucci
5655f786f4 Change order in DLP projection 2015-12-01 20:54:06 +01:00
Alessandro Ranellucci
5844b956be Bugfix: prevent crash when setting a Choice field to a non-indexed value 2015-12-01 20:53:29 +01:00
Alessandro Ranellucci
017ed05911 Removed debugging comment 2015-11-22 10:13:58 +01:00
Alessandro Ranellucci
ad4940a1d6 New option for inverting the Y axis in projection 2015-11-20 10:30:56 +01:00
Alessandro Ranellucci
f9d1ca8373 Project grid 2015-11-20 10:04:17 +01:00
Alessandro Ranellucci
bd00e7c584 Fix projection of slices with holes because wxDC is not honoring the fill rule 2015-11-20 09:57:51 +01:00
Alessandro Ranellucci
78d2240d71 Limit slider to number of layers 2015-11-20 09:41:13 +01:00
Alessandro Ranellucci
4a65671f64 Prevent absolute movement if user hasn't homed both X and Y 2015-11-20 09:36:17 +01:00
Alessandro Ranellucci
cc57432be4 Let user configure travel speed in manual control dialog 2015-11-20 09:32:48 +01:00
Alessandro Ranellucci
0af289ed78 Added manual projection control 2015-11-20 09:18:41 +01:00
Alessandro Ranellucci
2efc759a74 Add manual control to DLP projector too 2015-11-19 17:31:47 +01:00
Alessandro Ranellucci
624c5e78db Changed default settings for DLP projector and changed time options from integer to decimal 2015-11-19 15:04:50 +01:00
Alessandro Ranellucci
73b6400129 Merge branch 'master' into sender-dlp 2015-11-19 13:19:04 +01:00
Alessandro Ranellucci
21a5d6e137 Several fixes to GCodeSender, including compilation on older OS X and DTR reset 2015-11-19 13:17:52 +01:00
Alessandro Ranellucci
870cb3ccc4 Merge branch 'sender' into sender-dlp 2015-11-16 12:50:41 +01:00
Alessandro Ranellucci
e50bbc0245 Don't crash when no serial ports are available on Windows 2015-11-16 12:50:16 +01:00
Alessandro Ranellucci
c1f95ac173 Slice objects even if background processing is disabled 2015-11-15 23:16:14 +01:00
Alessandro Ranellucci
5ba2f72324 More customizable options for DLP projector 2015-11-15 22:42:56 +01:00
Alessandro Ranellucci
be0ba4d5a2 Re-enable serial connection for DLP projector 2015-11-15 21:08:47 +01:00
Alessandro Ranellucci
6bfa2cfaec Projector for DLP 2015-11-15 21:08:14 +01:00
Alessandro Ranellucci
80620a5e94 Some fixes and improvements to controller 2015-11-08 11:17:55 +01:00
Alessandro Ranellucci
3c43fb8081 Fix rendering on Windows 2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
9febb10bd7 Smoother manual control movements 2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
37ecc61d06 Two fixes for --debug 2015-11-08 09:12:59 +01:00
Alessandro Ranellucci
25a358cd20 Prevent double connection check 2015-11-06 16:34:54 +01:00
Alessandro Ranellucci
3cbc35143b More fixes for serial port detection on Windows 2015-11-06 16:33:54 +01:00
Alessandro Ranellucci
5d69e732d8 Fix serial port detection on Windows 2015-11-06 16:25:51 +01:00
Alessandro Ranellucci
9f9b5afedb Merge branch 'master' into sender 2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
61f0a9e4da Replace the flip word with mirror. #3060 2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
bce3d98d9d Bugfix: error when setting per-region percent perimeter_extrusion_width. #2983 
Conflicts:

	lib/Slic3r/Layer.pm
 2015-11-04 20:10:52 +01:00
Alessandro Ranellucci
b8e95f40a6 Prompt user when setting wipe + use_firmware_retraction. #3056 2015-11-04 19:43:50 +01:00
Alessandro Ranellucci
810d7ee1c0 Fixed one more memory leak 2015-11-04 19:29:59 +01:00
Alessandro Ranellucci
198dc7d3bd When background processing fails because of an error, display it in an explicit dialog 2015-11-04 19:28:25 +01:00
Alessandro Ranellucci
a25757a66d Fixed regression causing empty prints to hang. #3107 2015-11-04 19:20:34 +01:00
Alessandro Ranellucci
69a71db25b Bugfix: wrong default in extruder_offset tooltip. #3051 2015-11-04 19:13:56 +01:00
Alessandro Ranellucci
8f7e820a01 Display a warning when no USB/serial printers were configured 2015-11-03 23:00:59 +01:00
Alessandro Ranellucci
e8ae2d6ec2 Try to fix broken wx scrolling 2015-11-03 22:46:31 +01:00
Alessandro Ranellucci
d8a94c3936 Smarter logic for displaying printer panels 2015-11-03 21:55:17 +01:00
Alessandro Ranellucci
16c38315f7 Fixed manual control buttons 2015-11-02 20:42:40 +01:00
Alessandro Ranellucci
9ee6829ebc Implemented connection timeout in C++ 2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
4295d65115 Manual control 2015-11-02 20:16:37 +01:00
Alessandro Ranellucci
cb8f8a24b0 Keep print job order 2015-11-02 16:54:02 +01:00
Alessandro Ranellucci
01a2a07ecd More memory leaks fixed 
Conflicts:

	lib/Slic3r/GUI/Plater.pm
 2015-11-02 01:45:46 +01:00
Alessandro Ranellucci
4e3784a2a9 More memory leaks fixed 2015-11-02 01:44:19 +01:00
Alessandro Ranellucci
3685f5031d Fixed memory leak 2015-11-02 01:36:49 +01:00
Alessandro Ranellucci
05812a0a60 Fixed memory leak 2015-11-02 01:36:35 +01:00
Alessandro Ranellucci
b309c61de3 Test button for serial connection 2015-11-02 01:35:28 +01:00
Alessandro Ranellucci
fc1a7471cf Several improvements to the print job queue 2015-11-02 01:18:05 +01:00
Alessandro Ranellucci
9b21ac877a Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r.pm
	xs/MANIFEST
	xs/src/libslic3r/PrintConfig.hpp
 2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
2811af349a Added a new grid infill pattern 2015-11-01 19:03:11 +01:00
Alessandro Ranellucci
9fcec10737 Finished porting LayerRegion to C++ 2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
6ac79e3ed6 Ported make_perimeters() to C++ 2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
15d2522f3d Merge branch 'xs-perimetergenerator' 2015-07-23 15:53:19 +02:00
Alessandro Ranellucci
b4515cf695 Finished porting PerimeterGenerator to C++ 2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
0e18b094d1 More work for porting PerimeterGenerator to XS 2015-07-07 01:17:31 +02:00
Alessandro Ranellucci
c65c9d876e Bugfix: zooming in empty layers preview (because of disabled background processing) crashed 2015-07-04 15:26:11 +02:00
Alessandro Ranellucci
e84ead5291 Bugfix: changing range-based layer heigths didn't trigger background processing. #2958 2015-07-04 15:26:04 +02:00
Alessandro Ranellucci
440af2c81c Bugfix: bridge anchors were shortened under rare circumstances 2015-07-03 23:38:41 +02:00
Alessandro Ranellucci
b8aecbd56c Initial work for porting PerimeterGenerator to XS 2015-07-03 22:58:29 +02:00
Alessandro Ranellucci
3e739b87da Finished porting Slic3r::GCode to XS (speed boost!) 2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf Ported GCode::set_extruders() and GCode::change_layer() to XS 2015-07-02 19:33:08 +02:00
Alessandro Ranellucci
fbd640fdc5 Ported GCode::extrude_path() to XS (speed boost!) 2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
b025efe729 Ported GCode::travel_to() to XS 2015-07-02 15:12:04 +02:00
Alessandro Ranellucci
a6f4c8e567 Ported GCode::set_extruder() and OozePrevention 2015-07-02 15:02:20 +02:00
Alessandro Ranellucci
b14290b9f6 Make tests happy 2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
5571144c0e Ported Slic3r::GCode::needs_retraction() to XS 2015-07-01 23:14:40 +02:00
Alessandro Ranellucci
b4019bb438 Ported more Slic3r::GCode methods to XS 2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc Ported Slic3r::GCode storage to XS 2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7 Ported Slic3r::GCode::OozePrevention storage to XS 2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766 Ported Slic3r::GCode::Wipe storage to XS 2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6 Ported Slic3r::GCode::AvoidCrossingPerimeters to XS 2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
580d28d071 Finished porting PlaceholderParser to XS 2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
249088b4f8 Ported Config::setenv() to XS 2015-07-01 18:18:25 +02:00
Alessandro Ranellucci
f361d8ad43 Ported PlaceholderParser::apply_env_variables() to XS 2015-07-01 17:56:38 +02:00
Alessandro Ranellucci
455a1062ef Fix minor rendering glitch in 2D toolpaths preview 2015-06-17 00:34:05 +02:00
Alessandro Ranellucci
6dc3caa8b2 Typo 2015-06-15 17:08:12 +02:00
Alessandro Ranellucci
539cde8d7a Raise the thickness threshold used for generating thin walls. TODO: don't enforce this at the segment level but consider the average thickness of an entire polyline and compare it to the total length. #2910 2015-06-15 17:00:10 +02:00
Alessandro Ranellucci
bc69d6da81 Minor adjustment of infill_overlap math 2015-06-14 11:28:33 +02:00
Alessandro Ranellucci
552430db67 More fixes for Unicode path handling (thanks @josefprusa for Czech test VM) 2015-06-13 11:41:55 +02:00
Alessandro Ranellucci
1e23b82e24 Bugfix: small gaps were left between infill and perimeters when solid infill extrusion width was much thinner than internal infill extrusion width. #2895 2015-06-09 16:04:26 +02:00
Alessandro Ranellucci
eff0620ddf Prompt user when overwriting a file during G-code export as well. #2882 2015-06-03 13:19:43 +02:00
Alessandro Ranellucci
52d3a047a0 One more raft issue causing extra layers. #2723 2015-06-03 09:39:10 +02:00
Alessandro Ranellucci
c5f72a633a Bugfix: Repeat Last Quick Slice was affected by the plater exports. #2016 2015-06-02 22:27:11 +02:00
Alessandro Ranellucci
6018dafc46 Removed debugging statement 2015-06-02 20:03:57 +02:00
Alessandro Ranellucci
5ce4d8cfb0 Bugfix: extra thin layers added to raft. #2723 2015-06-02 19:58:36 +02:00
Alessandro Ranellucci
ee66392e11 Fix numerical issues causing incomplete raft under certain circumstances. Includes a minor refactoring of raft layer logic. #2723 2015-06-02 19:44:29 +02:00
Alessandro Ranellucci
854be6a186 Handle OctoPrint upload of files having Unicode characters in filename or path. #2827 2015-06-02 17:10:06 +02:00
Alessandro Ranellucci
56b993bb89 More fixes for Unicode filenames support on Windows and OS X 2015-06-02 16:10:15 +02:00
Alessandro Ranellucci
7b65a35519 Always limit volumetric speed with Max Volumetric Speed (not just when using autospeed). #2810 2015-06-02 11:54:38 +02:00
Alessandro Ranellucci
c37b5c2e87 Remove debugging statement 2015-06-02 11:49:43 +02:00
Alessandro Ranellucci
8613e174e7 Fix error in autospeed. #2810 2015-06-02 11:48:56 +02:00
Alessandro Ranellucci
e90f5fde4e Enlarge your about window 2015-06-02 11:20:45 +02:00
Alessandro Ranellucci
ca72fd4266 Fix ComboCtrl on Windows 2015-06-02 11:19:11 +02:00
Alessandro Ranellucci
03c754ab14 Add close button and support Esc key and close on click inside the window to the About dialog since the title bar is not displayed on Windows and some Linux distros. #2688 2015-06-02 10:49:24 +02:00
Alessandro Ranellucci
b4cc92b9fa Fix filament colors not being initialized in additional comboboxes 2015-06-01 23:58:34 +02:00
Alessandro Ranellucci
0a9f1c466a Minor improvements to filament choosers in the plater 2015-06-01 23:52:15 +02:00
Alessandro Ranellucci
c2c321c90b Restore the (modified) label in preset comboctrl 2015-06-01 23:34:04 +02:00
Alessandro Ranellucci
6c53b14ee4 Minor improvement to extruder count field 2015-06-01 23:19:26 +02:00
Alessandro Ranellucci
4402dfa6f3 Fix crash in GUI caused by recursive event calls. #2613 2015-06-01 23:11:27 +02:00
Alessandro Ranellucci
f14c0e2183 Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857 2015-06-01 17:55:51 +02:00
Alessandro Ranellucci
97c701cdac Fix concurrency issue in Wx when changing the number of extruders. #2863 2015-06-01 14:57:43 +02:00
Alessandro Ranellucci
d549393a84 Comment about GetSelection() being context-aware. #2873 2015-06-01 14:32:31 +02:00
Alessandro Ranellucci
5b82f09308 Merge pull request #2873 from darenschwenke/master 
Fixes #2858
 2015-06-01 14:31:07 +02:00
Alessandro Ranellucci
fbea32a81c Prevent writing empty materials to AMF files. Also add a note about material-id = 0 being reserved by AMF spec. #2871 2015-06-01 11:51:00 +02:00
Daren Schwenke
23119e3673 Fixes #2858 2015-06-01 02:48:11 -04:00
Alessandro Ranellucci
e26022a2f2 Comment about Ctrl+, 2015-05-31 22:35:52 +02:00
Alessandro Ranellucci
17eb50da6d Use Ctrl+, for Preferences (standard on OS X, don't know about others). #2860 2015-05-31 22:33:46 +02:00
Alessandro Ranellucci
29b0e807d4 New [current_extruder] variable in custom G-code. #2866 2015-05-31 22:14:48 +02:00
Alessandro Ranellucci
1875825f45 Minor fix to previous commit 2015-05-31 22:09:58 +02:00
Alessandro Ranellucci
7f70da97b4 New experimental autospeed feature. #2810 2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
6e280ab8cb Prompt user when using 100% infill with a pattern that does not support it 2015-05-28 18:56:35 +02:00
Alessandro Ranellucci
2f4fa41ce4 Fixed regression introduced with recent fixes to UTF-8 preset names handling on Windows that prevented their load on OS X (TODO: test on Linux) 2015-05-28 18:44:19 +02:00
Alessandro Ranellucci
e58c32bee8 Ask for confirmation before stopping prints 2015-05-28 18:33:15 +02:00
Alessandro Ranellucci
13b7316807 Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r/GUI/MainFrame.pm
 2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
0d08c1819b Bugfix: plater views were not refreshed after config wizard in simple mode 2015-05-27 00:50:18 +02:00
Alessandro Ranellucci
310212ed30 Enable menu icons on older Windows and Linux Wx 2015-05-26 11:27:07 +02:00
Alessandro Ranellucci
aa8b6afe8b Assign color to filaments 2015-05-26 02:01:43 +02:00
Alessandro Ranellucci
ad0a15debe Menu item icons :o) 2015-05-25 22:37:04 +02:00
Alessandro Ranellucci
b7b017c3fa Fit objects to print bed when they are too large and warn user. #2853 2015-05-25 19:51:47 +02:00
Alessandro Ranellucci
7c31134a66 Fixed one little regression in gap detection causing some very very narrow gaps to be skipped when external perimeter extrusion width was much smaller than perimeter extrusion width. Also, push a bit more material in gap fill. #2560 2015-05-25 00:03:38 +02:00
Alessandro Ranellucci
42ae8347df Zoom around mouse location in 2D toolpaths preview 2015-05-24 23:29:53 +02:00
Alessandro Ranellucci
8cbb12aeb6 Workaround for wxCocoa bug causing wxSpinCtrl values to be reset when losing focus after changing them from the text field. #2612 2015-05-24 17:24:10 +02:00
Alessandro Ranellucci
f010354201 Bugfix: skirt was not exported to G-code when raft_layers > 0. #2843 2015-05-24 16:28:04 +02:00
Alessandro Ranellucci
e0678d3a38 Bugfix: skirt was floating in 3D preview when raft layers were enabled. #2843 2015-05-24 15:47:07 +02:00
Alessandro Ranellucci
7cc745969c Bugfix: some gaps were filled twice. #2836 2015-05-22 11:21:49 +02:00
Alessandro Ranellucci
c64308a5e7 Render brim and skirt in 3D toolpaths preview. #2649 2015-05-18 00:49:16 +02:00
Alessandro Ranellucci
36ba2eb5d6 Improved zoom/pan for toolpaths preview 2015-05-17 21:29:57 +02:00
Alessandro Ranellucci
80b169aa75 Pan & zoom for toolpaths preview 2015-05-16 00:33:22 +02:00
Alessandro Ranellucci
97211f35e7 More robust medial axis pruning. #2800 2015-05-13 20:50:30 +02:00
Alessandro Ranellucci
1dc63071ed Try to fix crash upon quick slice. #2801 2015-05-06 00:39:16 +02:00
Alessandro Ranellucci
d998d97754 Bugfix: crash on Windows when deleting the first object part. #2774 2015-05-05 01:12:16 +02:00
Alessandro Ranellucci
73e32dfe5d Use unique continuous numbering for layer numbers in case of support material layers. #2634 2015-05-03 20:18:34 +02:00
Alessandro Ranellucci
0d01348acc Use radians everywhere, including ModelInstance::rotation 2015-05-03 18:40:00 +02:00
Alessandro Ranellucci
7d81aee62f Added the [scale] placeholder. #2791 2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
00acd32120 Fix failing test. #2806 2015-05-02 21:46:08 +02:00