Alessandro Ranellucci
|
0a8872ca6c
|
Extend utils/dump-stl.pl to also write STL files
|
2013-07-26 19:25:15 +02:00 |
|
Alessandro Ranellucci
|
debe540018
|
Better name for wipe
|
2013-07-26 16:23:43 +02:00 |
|
Alessandro Ranellucci
|
aa194c8125
|
Fix little regression causing object height not to be updated when object in plater was scaled
|
2013-07-26 14:30:00 +02:00 |
|
Alessandro Ranellucci
|
c1c1416838
|
Scale layer height ranges too when scaling object in plater. #1284
|
2013-07-26 14:26:59 +02:00 |
|
Alessandro Ranellucci
|
a145f1b6aa
|
Don't merge adjacent bridges so that more correct angles can be detected for each one
|
2013-07-26 12:31:44 +02:00 |
|
Alessandro Ranellucci
|
c69edf27e9
|
Bugfix: only_retract_when_crossing_perimeters was not triggering retraction when moving between islands that are covered/bridged on the above layer. #1308
|
2013-07-26 10:52:22 +02:00 |
|
Alessandro Ranellucci
|
37bf0fa53b
|
Bugfix: medial axis thin wall detection was triggered when not needed
|
2013-07-26 00:13:24 +02:00 |
|
Alessandro Ranellucci
|
8fe228fcee
|
Smarter ordering of gap fill
|
2013-07-26 00:03:28 +02:00 |
|
Alessandro Ranellucci
|
2b8662cf0c
|
Temporary workarond for an upstream bug in Moo which causes failure when running with threads. #1330
|
2013-07-24 10:06:02 +02:00 |
|
Alessandro Ranellucci
|
7ad291ea64
|
Add ZTable to thread_cleanup()
|
2013-07-23 23:20:18 +02:00 |
|
Alessandro Ranellucci
|
aa2ad3bbd2
|
Fix garbage collection of shared data. #1348
|
2013-07-23 23:18:22 +02:00 |
|
Alessandro Ranellucci
|
b1147861dd
|
Implement lower_bound() and upper_bound() methods for ZTable
|
2013-07-20 21:19:59 +02:00 |
|
Alessandro Ranellucci
|
e29aca3553
|
Reapply correct optimization for simplifiying fill_surfaces before performing the offset. #1325
|
2013-07-20 12:22:41 +02:00 |
|
Alessandro Ranellucci
|
1b285f3f46
|
Thread-safe integration of ExtrusionPath::Collection
|
2013-07-18 22:29:12 +02:00 |
|
Alessandro Ranellucci
|
c030e38908
|
Ported ExtrusionPath::Collection
|
2013-07-18 19:09:07 +02:00 |
|
Alessandro Ranellucci
|
0efea9e442
|
Ported diff() and intersection()
|
2013-07-17 01:21:30 +02:00 |
|
Alessandro Ranellucci
|
c7b6818ccf
|
Ported offset() and offset2()
|
2013-07-17 00:48:29 +02:00 |
|
Alessandro Ranellucci
|
bf8c799685
|
Ported diff_ex, intersection_ex, union_ex, xor_ex
|
2013-07-17 00:29:09 +02:00 |
|
Alessandro Ranellucci
|
f7ada2b5db
|
Ported make_clockwise() and make_counter_clockwise()
|
2013-07-16 21:09:29 +02:00 |
|
Alessandro Ranellucci
|
fe061b19ad
|
Ported Polygon->is_counter_clockwise() and rearranged code in .cpp files
|
2013-07-16 21:04:14 +02:00 |
|
Alessandro Ranellucci
|
79db996696
|
Ported diff_ex() to XS
|
2013-07-16 20:29:15 +02:00 |
|
Alessandro Ranellucci
|
898007fc36
|
Port offset_ex() and offset2_ex() to XS
|
2013-07-16 20:09:53 +02:00 |
|
Alessandro Ranellucci
|
9458c7db97
|
Fix integration of XS containers
|
2013-07-16 17:13:01 +02:00 |
|
Mark Hindess
|
b5426ad297
|
Revert "Optimization: simplify fill_surfaces before the offset operation"
To workaround issue #1325 and possibly #1320.
This reverts commit 3a046e3411.
|
2013-07-16 10:44:52 +01:00 |
|
Alessandro Ranellucci
|
9b582a11ff
|
Adopt XS containers everywhere (incomplete work)
|
2013-07-16 09:49:34 +02:00 |
|
Alessandro Ranellucci
|
ab6b3d41a7
|
XS interface completed, including new Line class
|
2013-07-15 22:57:22 +02:00 |
|
Alessandro Ranellucci
|
9af2a1c007
|
Use XS Point everywhere
|
2013-07-15 20:31:43 +02:00 |
|
Alessandro Ranellucci
|
d0701cdcd4
|
Implemented Slic3r::ExtrusionLoop
|
2013-07-15 16:21:09 +02:00 |
|
Alessandro Ranellucci
|
c9749ca3b3
|
More integration of Slic3r::Point::XS
|
2013-07-15 16:04:49 +02:00 |
|
Alessandro Ranellucci
|
159a009f96
|
Fix tests here and there
|
2013-07-15 15:26:56 +02:00 |
|
Alessandro Ranellucci
|
f612d4c64e
|
Ported ExtrusionPath to XS. Failing test for Surface
|
2013-07-15 12:14:22 +02:00 |
|
Alessandro Ranellucci
|
13e3a9129c
|
Use Slic3r::ExPolygon::Collection for Layer->slices
|
2013-07-14 15:06:49 +02:00 |
|
Alessandro Ranellucci
|
7534c1e6d9
|
Use Slic3r::Surface::Collection for Layer::Region->slices
|
2013-07-14 15:03:45 +02:00 |
|
Alessandro Ranellucci
|
5885be881c
|
New Slic3r::Surface::Collection class
|
2013-07-14 14:56:43 +02:00 |
|
Alessandro Ranellucci
|
399bc80899
|
Ported Slic3r::Surface to XS
|
2013-07-14 13:05:55 +02:00 |
|
Alessandro Ranellucci
|
b1ad466189
|
Ported Slic3r::ExPolygon::Collection to XS
|
2013-07-14 00:38:01 +02:00 |
|
Alessandro Ranellucci
|
7f4dc4e248
|
Fix merging error
|
2013-07-14 00:20:03 +02:00 |
|
Alessandro Ranellucci
|
31809d473f
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/GCode.pm
xs/src/Point.hpp
|
2013-07-13 21:00:19 +02:00 |
|
Alessandro Ranellucci
|
027f8d1e53
|
Optimizations in the algorithm that builds loops
|
2013-07-13 20:56:13 +02:00 |
|
Alessandro Ranellucci
|
69a8bac9c9
|
Show a warning if we repaired the input file
|
2013-07-13 20:34:57 +02:00 |
|
Alessandro Ranellucci
|
6affa23297
|
Show repair stats in object info dialog
|
2013-07-13 20:23:03 +02:00 |
|
Alessandro Ranellucci
|
89fae9ee15
|
Make threaded perls work with XS data in plater thumbnails. Includes cleaner ->arrayref implementation
|
2013-07-11 19:34:37 +02:00 |
|
Alessandro Ranellucci
|
fb7cea3cb9
|
Make plater work with XS data in single-thread environment
|
2013-07-11 19:13:43 +02:00 |
|
Alessandro Ranellucci
|
87a5de193d
|
ExPolygon::XS->rotate()
|
2013-07-11 18:55:51 +02:00 |
|
Alessandro Ranellucci
|
1506907212
|
More incomplete work to make the plater work with XS data
|
2013-07-11 16:48:44 +02:00 |
|
Alessandro Ranellucci
|
8d171a297e
|
Add thread cleanup to avoid double destruction of shared XS data
|
2013-07-11 16:17:36 +02:00 |
|
Alessandro Ranellucci
|
6f6ee40dae
|
Small optimization in case no overhang logic is required at all
|
2013-07-07 19:12:44 +02:00 |
|
Alessandro Ranellucci
|
c57a88c943
|
start_perimeters_at_non_overhang was still partially enforced
|
2013-07-07 19:11:23 +02:00 |
|
Alessandro Ranellucci
|
5409c27852
|
Partial GUI compatibility with XS data
|
2013-07-07 18:43:04 +02:00 |
|
Alessandro Ranellucci
|
8380ca812b
|
One more arrayref conversion
|
2013-07-07 17:10:22 +02:00 |
|
Alessandro Ranellucci
|
a1e4bda670
|
Have Clipper.pm only return ExPolygon::XS objects
|
2013-07-07 15:17:09 +02:00 |
|
Alessandro Ranellucci
|
53e4532f9c
|
Merge branch 'master' into xsdata
|
2013-07-07 12:58:06 +02:00 |
|
Alessandro Ranellucci
|
3a046e3411
|
Optimization: simplify fill_surfaces before the offset operation
|
2013-07-07 12:57:26 +02:00 |
|
Alessandro Ranellucci
|
f7967414e0
|
Store layer slices and region slices as XS data to save memory and make them shared across threads
|
2013-07-07 12:54:20 +02:00 |
|
Alessandro Ranellucci
|
cca25c9950
|
Fix a numerical issue causing failure to detect some bridge anchors
|
2013-07-06 14:38:53 +02:00 |
|
Alessandro Ranellucci
|
532ff3cde9
|
Apply the Polyline constructor refactoring to the newslice code
|
2013-07-06 12:18:58 +02:00 |
|
Alessandro Ranellucci
|
985af5ee56
|
Merge branch 'newslice'
|
2013-07-06 12:16:54 +02:00 |
|
Alessandro Ranellucci
|
0bb4a5649a
|
Merge branch 'master' into xs
|
2013-07-06 12:15:17 +02:00 |
|
Alessandro Ranellucci
|
8d1069766b
|
Workaround dclone() not being thread-safe
|
2013-07-06 12:14:49 +02:00 |
|
Alessandro Ranellucci
|
9dbf21235c
|
Fixed missing change in recent refactoring, causing plater crash. #1298
|
2013-07-06 11:50:41 +02:00 |
|
Alessandro Ranellucci
|
ab584babf6
|
Encode Windows paths for the C STL reader
|
2013-07-06 11:39:28 +02:00 |
|
Alessandro Ranellucci
|
28f8083ab7
|
Merge branch 'master' into xs
|
2013-07-06 11:38:40 +02:00 |
|
Alessandro Ranellucci
|
f455ecb7da
|
Rename adjust_overhang_flow to overhangs
|
2013-07-06 11:35:40 +02:00 |
|
Alessandro Ranellucci
|
606d856af8
|
Lower case option group titles
|
2013-07-06 02:46:09 +02:00 |
|
Alessandro Ranellucci
|
b857d79604
|
Move spiral_vase to vertical shells section
|
2013-07-05 22:23:45 +02:00 |
|
Alessandro Ranellucci
|
f8ae8d3e8d
|
New option to disable overhang flow
|
2013-07-05 22:12:58 +02:00 |
|
Alessandro Ranellucci
|
282c751b0f
|
New option for disabling thin wall detection
|
2013-07-05 22:10:43 +02:00 |
|
Alessandro Ranellucci
|
0a7e0ffecf
|
New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang
|
2013-07-05 22:06:58 +02:00 |
|
Alessandro Ranellucci
|
362232ada4
|
New Quality section in GUI
|
2013-07-05 21:57:56 +02:00 |
|
Alessandro Ranellucci
|
f0440bede4
|
Move infill_every_layers infill_only_where_needed into their own "Reducing Printing Time" section
|
2013-07-05 21:55:01 +02:00 |
|
Alessandro Ranellucci
|
eb2d20d062
|
Merge branch 'master' into xs
|
2013-07-05 17:29:28 +02:00 |
|
Alessandro Ranellucci
|
339c487077
|
Fix starting point after overhang clipping is performed
|
2013-07-05 17:25:56 +02:00 |
|
Alessandro Ranellucci
|
b3b2a1e891
|
One more fix in overhang starting point detection
|
2013-07-05 17:08:26 +02:00 |
|
Alessandro Ranellucci
|
df4612a209
|
Prefer starting points that are NOT in overhangs
|
2013-07-05 17:00:14 +02:00 |
|
Alessandro Ranellucci
|
d074b98aba
|
Optimization: don't store wipe path if wipe is not requested
|
2013-07-05 15:03:08 +02:00 |
|
Alessandro Ranellucci
|
be4eb3762f
|
Use dclone() in Point class too
|
2013-07-05 14:48:03 +02:00 |
|
Alessandro Ranellucci
|
72f77a3420
|
Use dclone() in Polyline and ExPolygon too
|
2013-07-05 14:46:32 +02:00 |
|
Alessandro Ranellucci
|
8061cc6e30
|
Optimization in Polyline instantiation
|
2013-07-05 14:44:41 +02:00 |
|
Alessandro Ranellucci
|
27c421c27f
|
Slight optimization
|
2013-07-05 14:21:20 +02:00 |
|
Alessandro Ranellucci
|
b266d6217a
|
Skip slow gap detection if we aren't going to fill gaps anyway
|
2013-07-05 14:17:54 +02:00 |
|
Alessandro Ranellucci
|
4d46ebc6cb
|
Removed useless, slow, code
|
2013-07-05 14:17:09 +02:00 |
|
Alessandro Ranellucci
|
f26f084064
|
New freeze.t test
|
2013-07-03 15:42:01 +02:00 |
|
Alessandro Ranellucci
|
bb656ea72c
|
Merge branch 'master' into xs
|
2013-07-03 10:52:13 +02:00 |
|
Alessandro Ranellucci
|
71057b54a9
|
Allow negative values in validation...
|
2013-07-03 10:51:44 +02:00 |
|
Alessandro Ranellucci
|
63ba894260
|
Add some comments to OpenGL code
|
2013-07-01 12:23:44 +02:00 |
|
Alessandro Ranellucci
|
8ec3ec6bda
|
Cosmetic changes to the new OpenGL code by iXce
|
2013-07-01 10:58:30 +02:00 |
|
Alessandro Ranellucci
|
dcc2b7f4ff
|
Enable PreviewCanvas
|
2013-07-01 01:51:11 +02:00 |
|
Alessandro Ranellucci
|
7c4b1bc736
|
Merge pull request #1283 from iXce/master
Panning/rotation/zooming support for 3D viewer
|
2013-06-30 16:50:16 -07:00 |
|
Guillaume Seguin
|
b2e0c1ab42
|
Use max of all dimensions instead of max of first 2
|
2013-07-01 00:08:02 +02:00 |
|
Guillaume Seguin
|
1f229f3233
|
Cleanup
|
2013-06-30 23:54:13 +02:00 |
|
Guillaume Seguin
|
e92fefb6ff
|
Working rotation for mesh viewer
|
2013-06-30 23:51:06 +02:00 |
|
Alessandro Ranellucci
|
1b6a9c0c3b
|
Added validation on all settings. #611
|
2013-06-30 15:39:03 +02:00 |
|
Guillaume Seguin
|
6668a81c64
|
Start work on rotation handling
|
2013-06-29 18:31:06 +02:00 |
|
Guillaume Seguin
|
dd7830b1b7
|
Add panning support
|
2013-06-29 15:12:57 +02:00 |
|
Guillaume Seguin
|
43d764feff
|
Implement zoom to point
|
2013-06-29 14:16:56 +02:00 |
|
Guillaume Seguin
|
317c911c67
|
Remove leftover from 47b2c13c
|
2013-06-29 14:16:38 +02:00 |
|
Guillaume Seguin
|
bb3ebb0244
|
Switch to orthographic projection
|
2013-06-29 10:43:35 +02:00 |
|
Guillaume Seguin
|
47b2c13c99
|
Get rid of demo timer in PreviewCanvas
|
2013-06-29 10:43:21 +02:00 |
|
Alessandro Ranellucci
|
1f50d9c7e8
|
https -> http in manual URL
|
2013-06-24 20:38:20 +02:00 |
|
Alessandro Ranellucci
|
5975145426
|
Automatically repair any input STL file
|
2013-06-24 20:34:57 +02:00 |
|
Alessandro Ranellucci
|
ecdc2f077b
|
Merge branch 'master' into xs
Conflicts:
Build.PL
|
2013-06-24 19:37:07 +02:00 |
|
Alessandro Ranellucci
|
f29faf0548
|
New Slic3r::TriangleMesh::XS class
|
2013-06-24 19:35:49 +02:00 |
|
Alessandro Ranellucci
|
f5cc446853
|
Menu item for launching the manual
|
2013-06-24 18:07:33 +02:00 |
|
Alessandro Ranellucci
|
a15884dac9
|
Remove useless algorithm in loop merging code
|
2013-06-24 00:08:39 +02:00 |
|
Alessandro Ranellucci
|
3622193c3f
|
Rewrite the algorithm that closes loops in order. We now tolerate the case when more than two facets share a common edge
|
2013-06-24 00:02:01 +02:00 |
|
Alessandro Ranellucci
|
86c4f5c5b0
|
Merge branch 'master' into newslice
|
2013-06-23 22:23:25 +02:00 |
|
Alessandro Ranellucci
|
de45b823e1
|
Merge branch 'master' into xs
|
2013-06-23 21:12:19 +02:00 |
|
Alessandro Ranellucci
|
2a2633da0a
|
New automatic built-in STL repair
|
2013-06-23 21:11:46 +02:00 |
|
Alessandro Ranellucci
|
625a300822
|
New [layer_num] placeholder in layer change G-code
|
2013-06-23 19:25:32 +02:00 |
|
Alessandro Ranellucci
|
8ea4ed3b5e
|
Allow to supply custom G-code via command line if file is not found
|
2013-06-23 19:25:02 +02:00 |
|
Alessandro Ranellucci
|
2d687cd0a0
|
Only combine internal infill and leave internal-solid as it is. #1248
|
2013-06-23 18:21:47 +02:00 |
|
Alessandro Ranellucci
|
f3a9d41c70
|
Cache a Z table for layer range search
|
2013-06-23 17:07:12 +02:00 |
|
Alessandro Ranellucci
|
37105e8237
|
Ported get_layer_range() to C
|
2013-06-23 15:33:07 +02:00 |
|
Alessandro Ranellucci
|
9a904dc88d
|
Lighter implementation of the slicing algorithm to save memory and time
|
2013-06-23 12:26:40 +02:00 |
|
Alessandro Ranellucci
|
cd1a39397b
|
Optimize concentric loops
|
2013-06-23 00:50:44 +02:00 |
|
Alessandro Ranellucci
|
78f1527ab7
|
Compensate perimeter/infill overlap for concentric infill
|
2013-06-23 00:37:04 +02:00 |
|
Alessandro Ranellucci
|
5c7b447f07
|
Ensure there's no numerical error when searching for concave points
|
2013-06-23 00:21:19 +02:00 |
|
Alessandro Ranellucci
|
1e3ce9b8c4
|
Complete retraction if the wipe path was too short for the full retract. #1264
|
2013-06-23 00:10:57 +02:00 |
|
Alessandro Ranellucci
|
c03f9f0197
|
Fixed regression causing wrong direction for inwards move in holes. Includes regression test. #1265
|
2013-06-23 00:05:08 +02:00 |
|
Alessandro Ranellucci
|
0bd3d958e2
|
More optimizations in slice_facet()
|
2013-06-22 20:48:56 +02:00 |
|
Alessandro Ranellucci
|
1565560b55
|
One more little optimization
|
2013-06-22 20:37:15 +02:00 |
|
Alessandro Ranellucci
|
db266cde9f
|
Little optimizations in slicing
|
2013-06-22 20:32:39 +02:00 |
|
Alessandro Ranellucci
|
398e66572d
|
Optimization: remove overkill sort
|
2013-06-22 19:59:27 +02:00 |
|
Alessandro Ranellucci
|
82fbdb603f
|
Optimization: cache model bounding box
|
2013-06-22 19:36:50 +02:00 |
|
Alessandro Ranellucci
|
4774b0e910
|
Be tolerant with STL files without the "normal" word
|
2013-06-22 16:15:07 +02:00 |
|
Alessandro Ranellucci
|
64a21276e3
|
Add regression test for concave starting points. #135
|
2013-06-22 15:22:58 +02:00 |
|
Alessandro Ranellucci
|
b35e668ee7
|
Require Boost::Geometry::Utils 0.15
|
2013-06-21 19:46:45 +02:00 |
|
Alessandro Ranellucci
|
aba7641fe4
|
Avoid starting loops on convex vertices and/or overhangs. #296 #135
|
2013-06-21 19:43:15 +02:00 |
|
Alessandro Ranellucci
|
90d8da0e0d
|
Limit fan speed to 100% :-)
|
2013-06-21 16:08:16 +02:00 |
|
Alessandro Ranellucci
|
19b40baf55
|
Add regression test to ensure fan is enabled when printing overhangs. #432
|
2013-06-21 15:38:58 +02:00 |
|
Alessandro Ranellucci
|
c707073a73
|
Some fixes about overhang detection. Includes regression tests
|
2013-06-21 14:52:35 +02:00 |
|
Alessandro Ranellucci
|
f5322596d9
|
Note to self in code
|
2013-06-20 20:16:15 +02:00 |
|
Alessandro Ranellucci
|
7e875393f5
|
New algorithm for overhang detection
|
2013-06-20 20:11:46 +02:00 |
|
Alessandro Ranellucci
|
015580629b
|
Removed wrong optimization causing possible extra retractions while moving in infill space
|
2013-06-20 19:43:53 +02:00 |
|
Alessandro Ranellucci
|
4474595629
|
Removed useless code
|
2013-06-20 19:21:35 +02:00 |
|
Alessandro Ranellucci
|
b414c50b68
|
Optimization: use Boost.Geometry for point in polygon
|
2013-06-20 18:48:11 +02:00 |
|
Alessandro Ranellucci
|
f7be746599
|
Disable overhang detection for now
|
2013-06-19 20:09:58 +02:00 |
|
Alessandro Ranellucci
|
fcd4de00e5
|
One more fix for --complete-objects working on single-object plates
|
2013-06-19 18:01:24 +02:00 |
|
Alessandro Ranellucci
|
5843f5df6c
|
Fix regression in --complete-objects causing fatal error and/or wrong warnings about object heights
|
2013-06-19 17:34:37 +02:00 |
|
Alessandro Ranellucci
|
b71bc37111
|
Remove a couple cases of dangerous aliasing, causing crashes. #1257
|
2013-06-17 19:27:08 +02:00 |
|
Alessandro Ranellucci
|
799aeedd97
|
Fixed wrong refactoring in ac4a0bcdd8
|
2013-06-17 13:32:53 +02:00 |
|
Alessandro Ranellucci
|
c4036470af
|
Fix one thing leftover from bounding box refactoring
|
2013-06-17 12:11:28 +02:00 |
|
Alessandro Ranellucci
|
c6ef81fb91
|
Modify overhang detection algorithm
|
2013-06-16 18:08:17 +02:00 |
|
Alessandro Ranellucci
|
45611d6742
|
Fix connection algorithm for rectilinear infill as sometimes it wasn't connecting segments correctly
|
2013-06-16 18:05:56 +02:00 |
|
Alessandro Ranellucci
|
0ad78eaf55
|
Return explicit 0 from have_version_check() to avoid wxMenuItem->Enable errors
|
2013-06-16 16:07:47 +02:00 |
|
Alessandro Ranellucci
|
3bcf1da702
|
Disable avoid_crossing_perimeters optimization until we can detect nested shells. #1254
|
2013-06-16 16:04:19 +02:00 |
|
Alessandro Ranellucci
|
32aafd2eb9
|
Temporary workaround until Boost::Geometry::Utils 0.14 is available
|
2013-06-16 15:11:39 +02:00 |
|
Alessandro Ranellucci
|
258842b845
|
New logic for connecting honeycomb loops
|
2013-06-16 13:31:10 +02:00 |
|
Alessandro Ranellucci
|
9ff85898b1
|
New logic for connecting honeycomb paths
|
2013-06-16 13:26:57 +02:00 |
|
Alessandro Ranellucci
|
961586fe8f
|
Rewrite honeycomb infill so that it only generates the pattern for the bounding box of the region instead of the full print, so reduce complexity of the clipping routine
|
2013-06-16 13:13:52 +02:00 |
|
Alessandro Ranellucci
|
ac4a0bcdd8
|
Refactoring: use Slic3r::Geometry::BoundingBox objects everywhere
|
2013-06-16 12:21:25 +02:00 |
|
Alessandro Ranellucci
|
07407e5dbd
|
Merge branch 'master' into overhang
Conflicts:
lib/Slic3r/GCode.pm
|
2013-06-16 10:49:33 +02:00 |
|
Alessandro Ranellucci
|
2993a1659e
|
Bump version number
|
2013-06-16 10:22:22 +02:00 |
|
Alessandro Ranellucci
|
d0eac88ff9
|
Reduce vibrations when doing gap fill
|
2013-06-15 21:27:36 +02:00 |
|
Alessandro Ranellucci
|
8b48d79563
|
Improve zigzag gap fill. #1234
|
2013-06-15 21:10:04 +02:00 |
|
Alessandro Ranellucci
|
cb75b1e47b
|
Fix plater crash on threaded perls
|
2013-06-15 19:15:24 +02:00 |
|
Alessandro Ranellucci
|
8d9d023dd7
|
Merge branch 'honeycomb-clipping'
|
2013-06-15 18:10:16 +02:00 |
|
Alessandro Ranellucci
|
20158aac0d
|
Merge branch 'issue1161'
|
2013-06-15 18:08:01 +02:00 |
|
Alessandro Ranellucci
|
7560d5f131
|
Merge branch 'perl-518'
|
2013-06-15 18:06:36 +02:00 |
|
Alessandro Ranellucci
|
8b6afb61d9
|
Fix little error in tests
|
2013-06-15 17:17:48 +02:00 |
|
Alessandro Ranellucci
|
7bf308c08f
|
Fix one more centering problem caused by wrong bounding box implementation
|
2013-06-15 15:50:02 +02:00 |
|
Alessandro Ranellucci
|
a8981b8b35
|
Bugfix: infill was clipped badly. Includes regression test. #1245
|
2013-06-15 12:10:57 +02:00 |
|
Alessandro Ranellucci
|
5fa49aad02
|
Releasing 0.9.10
|
2013-06-14 16:59:20 +02:00 |
|
Alessandro Ranellucci
|
878d17605c
|
Ignore solid_infill_every_layers when fill_density is 0. Includes regression test. #1240
|
2013-06-14 16:48:24 +02:00 |
|
Alessandro Ranellucci
|
145fe08203
|
More fixes for plater positioning. #1171
|
2013-06-13 20:05:32 +02:00 |
|
Alessandro Ranellucci
|
962a51cc80
|
Some cleanup for the plater code
|
2013-06-13 14:33:10 +02:00 |
|
Alessandro Ranellucci
|
def013ba91
|
Use _transform_thumbnail when rescaling thumbnails
|
2013-06-13 11:28:27 +02:00 |
|
Alessandro Ranellucci
|
0a74e45432
|
Scale and recenter thumbnails when bed size and/or print center is changed
|
2013-06-13 11:27:15 +02:00 |
|
Alessandro Ranellucci
|
5dcf277563
|
Rotate cw when using free rotation button to be consistent with icon. #1171
|
2013-06-13 10:27:47 +02:00 |
|
Alessandro Ranellucci
|
aee7b70d79
|
Bugfix: the order of transformations was not consistent in plater and actual G-code generation. #1171 #1191
|
2013-06-12 16:53:19 +02:00 |
|
Alessandro Ranellucci
|
8e0e03247d
|
Bugfix: ineffective scale() method in recently created BoundingBox objects caused wrong positioning for scaled objects in plater. Includes regression test. #1171
|
2013-06-10 15:34:45 +02:00 |
|
Alessandro Ranellucci
|
8b2c13cc6f
|
Regression test for top solid surfaces in V-shaped object. #1161
|
2013-06-08 20:01:26 +02:00 |
|
Alessandro Ranellucci
|
d5a9320587
|
Bugfix: narrow top surfaces didn't generate solid layers. #1161
|
2013-06-08 17:48:34 +02:00 |
|
Alessandro Ranellucci
|
b12a09ed71
|
Rename makerbot G-code flavor to makerware; also mention Repetier among RepRap firmwares. #1034
|
2013-06-07 23:24:53 +02:00 |
|
Alessandro Ranellucci
|
510c2092df
|
Fix rotation and scaling in plater producing mispositioned objects in G-code after recent changes. Includes a large refactoring and the new Slic3r::Geometry::BoundingBox class. #1171 #1191
|
2013-06-07 23:16:02 +02:00 |
|
Alessandro Ranellucci
|
9ea55497c2
|
Prevent crash when user deleted object from plater before thumbnail was generated in the other thread. #1207
|
2013-06-07 13:54:40 +02:00 |
|
Alessandro Ranellucci
|
f991e3bc10
|
Fixed SVG export and added regression test
|
2013-06-07 12:00:03 +02:00 |
|
Alessandro Ranellucci
|
fcc442882c
|
Fix plater defect causing misalignment
|
2013-06-06 20:53:56 +02:00 |
|
Alessandro Ranellucci
|
43814e99f6
|
Remove smart match and lexical $_ for compatibility with perl 5.18. #1216
|
2013-06-06 10:46:58 +02:00 |
|
Alessandro Ranellucci
|
8c40cefe1e
|
Also use G1 when traveling with avoid_crossing_perimeters enabled
|
2013-06-05 17:12:34 +02:00 |
|
Alessandro Ranellucci
|
532ae53d0b
|
Use G1 instead of G0 for restart after retraction to avoid blending with the previous travel move. #1212
|
2013-06-05 16:58:30 +02:00 |
|
Alessandro Ranellucci
|
b3f1795cb4
|
Reduce wipe feedrate a bit
|
2013-06-03 22:49:47 +02:00 |
|
Alessandro Ranellucci
|
8b3aa32a7e
|
Update tooltip for only_retract_when_crossing_perimeters
|
2013-06-03 22:40:29 +02:00 |
|
Alessandro Ranellucci
|
230367b383
|
Order objects using a nearest neighbor search instead of relying on the order in plater. #1184
|
2013-06-03 21:54:55 +02:00 |
|
Alessandro Ranellucci
|
3ffe98f0c3
|
Use actual Z to order objects in sequential printing rather than layer count, as layer heights might be different
|
2013-06-03 21:40:13 +02:00 |
|
Alessandro Ranellucci
|
09b81ad027
|
Fix typo causing regression in island ordering. #1211
|
2013-06-03 21:27:09 +02:00 |
|
Alessandro Ranellucci
|
c95245f143
|
Some G-code flavor logic simplification
|
2013-06-03 18:01:14 +02:00 |
|
Alessandro Ranellucci
|
167ec7a4e7
|
Use M135 for makerbot toolchange; also disable any G90 and G21 command. #1034
|
2013-06-03 16:21:22 +02:00 |
|
Alessandro Ranellucci
|
974379c955
|
Add M103 after retraction and M101 before restart when Makerbot G-code flavor is selected. #1119
|
2013-06-03 15:37:32 +02:00 |
|
Alessandro Ranellucci
|
71608e799e
|
Keep per-extruder E absolute value for Makerbot flavour to avoid any G92 E0. #950
|
2013-06-03 15:27:58 +02:00 |
|
Alessandro Ranellucci
|
48d5d6de58
|
Typo
|
2013-06-03 12:29:45 +02:00 |
|
Alessandro Ranellucci
|
81bae56e92
|
Limit only_retract_when_crossing_perimeters to travel moves that are completely enclosed in the upper layer's slices so that we avoid visible traces on top layers. #1091
|
2013-06-03 12:25:32 +02:00 |
|
Alessandro Ranellucci
|
7134df4638
|
Only skip objects with no layers without stopping the whole job
|
2013-06-03 11:39:23 +02:00 |
|
Alessandro Ranellucci
|
8c74d2f41e
|
New --autosave option for better toolchain integration. #837
|
2013-06-02 20:03:22 +02:00 |
|
Alessandro Ranellucci
|
895e0bbfcd
|
Include M82/M83 for Teacup too. #1206
|
2013-06-02 19:58:29 +02:00 |
|
Alessandro Ranellucci
|
6bb2e593a7
|
Avoid potential fatal error when processing models with empty layers. #1127
|
2013-06-02 19:49:21 +02:00 |
|
Alessandro Ranellucci
|
8a01cb9e96
|
Generate a better error when input file is too thin and no layers could be generated. #1127
|
2013-06-02 19:44:59 +02:00 |
|
Alessandro Ranellucci
|
086ec4af9c
|
Fixed yet one more regression in Quick Slice caused by recent Model refactoring. #1208
|
2013-06-02 19:32:53 +02:00 |
|
Alessandro Ranellucci
|
28a01e7c5e
|
Fix past participle
|
2013-06-02 16:58:23 +02:00 |
|
Alessandro Ranellucci
|
655d528d92
|
Fixed recent regression causing a spike when avoid_crossing_perimeters was used on split objects
|
2013-06-02 16:56:08 +02:00 |
|
Alessandro Ranellucci
|
da36df65a4
|
Warning removed when exporting config
|
2013-06-02 11:15:57 +02:00 |
|
Alessandro Ranellucci
|
30ce7dc745
|
Bugfix: wizard crashing in Simple Mode. #1077 #1122
|
2013-06-01 18:56:23 +02:00 |
|
Alessandro Ranellucci
|
d801876ee9
|
Revert "Bugfix: configuration wizard crash 2 #1077"
This reverts commit 55c413627f.
|
2013-06-01 18:54:07 +02:00 |
|
Alessandro Ranellucci
|
973d30a2b4
|
Merge pull request #1148 from hroncok/patch-1
Bugfix: configuration wizard crash 2 #1077
|
2013-06-01 09:46:17 -07:00 |
|
Alessandro Ranellucci
|
49531f6f78
|
Fixed regression causing rotation from plater to also translate the resulting G-code. #1191
|
2013-05-31 19:41:31 +02:00 |
|
Alessandro Ranellucci
|
c62b49d1af
|
Optimization of extra perimeters detection
|
2013-05-31 14:30:07 +02:00 |
|
Alessandro Ranellucci
|
917915d68e
|
Bugfix: superfluous extra perimeters were generated. #1170
|
2013-05-31 14:23:42 +02:00 |
|
Alessandro Ranellucci
|
5f06cea821
|
Prevent --extrusion-multiplier <= 0. #1183
|
2013-05-31 12:45:18 +02:00 |
|
Alessandro Ranellucci
|
5c7dd2cf78
|
Some fixes to the cooling logic and new test suite for cooling
|
2013-05-31 12:18:33 +02:00 |
|
Alessandro Ranellucci
|
da76496988
|
Store config in Slic3r::GCode object
|
2013-05-31 11:19:36 +02:00 |
|
Alessandro Ranellucci
|
7baaf6bf5d
|
Fixed regression causing skirt_height to he honored incorrectly when printing more than one object. Includes regression test #1200
|
2013-05-30 20:06:05 +02:00 |
|
Alessandro Ranellucci
|
8f5a958948
|
Rename do_slice() to quick_slice()
|
2013-05-20 11:02:12 +02:00 |
|
Alessandro Ranellucci
|
71d6f428ca
|
Apparent fix for "Attempt to free unreferenced scalar"
|
2013-05-20 10:57:27 +02:00 |
|
Alessandro Ranellucci
|
c43ef45064
|
Require the newest Math::Clipper and Boost::Geometry::Utils to avoid the huge memory leaks present in previous versions
|
2013-05-20 09:56:55 +02:00 |
|
Alessandro Ranellucci
|
f13d4e4e66
|
Restore skirt preview and extrude clearance after recent usage of int_offset()
|
2013-05-19 18:03:18 +02:00 |
|
Alessandro Ranellucci
|
5494f4f385
|
Free @_ before spawning a new thread (known old Perl bug) as an attempt to fix the unref scalars error
|
2013-05-19 17:34:33 +02:00 |
|
Alessandro Ranellucci
|
48e37f97b4
|
Fixed bad copy and paste causing multiple extruders to throw an error
|
2013-05-19 15:33:54 +02:00 |
|
Alessandro Ranellucci
|
bbb190dc68
|
Generate infill using each object's bounding_box instead of full print. #1177
|
2013-05-19 11:35:41 +02:00 |
|
Alessandro Ranellucci
|
627debf284
|
Scale bounding_box by sqrt(2) in honeycomb too to ensure it will cover the object even after rotation, like we already did for Rectilinear
|
2013-05-19 11:25:41 +02:00 |
|
Alessandro Ranellucci
|
b5b0c2cc89
|
Bad copy and paste in commit from yesterday causing loss of perimeters. #1178
|
2013-05-19 10:47:00 +02:00 |
|
Alessandro Ranellucci
|
7180e7cb30
|
Speed optimization in avoid_crossing_perimeters
|
2013-05-19 10:35:11 +02:00 |
|
Alessandro Ranellucci
|
f599ed00c6
|
Avoid closures, move planning code to _plan() and layer G-code generation to Slic3r::GCode::Layer
|
2013-05-18 17:41:37 +02:00 |
|
Alessandro Ranellucci
|
08a0bbd7f0
|
Optimization: split meshes automatically when avoid_crossing_perimeters is enabled, so that we reduce the complexity of the MotionPlanner graphs. This commit includes a very large refactoring of the Model class which is now responsible for duplication and arrangement
|
2013-05-18 16:48:26 +02:00 |
|
Alessandro Ranellucci
|
e33ca54943
|
Some code cleanup in MotionPlanner
|
2013-05-17 20:03:38 +02:00 |
|
Alessandro Ranellucci
|
ba433822b6
|
Disable OpenGL code in master branch for now
|
2013-05-17 15:44:23 +02:00 |
|
Alessandro Ranellucci
|
8f77d3b945
|
Increase spacing for bridge traces. #1090
|
2013-05-17 15:03:42 +02:00 |
|
Alessandro Ranellucci
|
8e2063397a
|
Merge branch 'opengl'
|
2013-05-17 14:17:02 +02:00 |
|
Alessandro Ranellucci
|
5c74fd095b
|
Very basic implementation of 3D preview - install Wx::GLCanvas to get it working
|
2013-05-17 14:14:33 +02:00 |
|
Alessandro Ranellucci
|
61c1045331
|
Merge branch 'master' into overhang
|
2013-05-16 18:36:11 +02:00 |
|
Alessandro Ranellucci
|
228c84ddc1
|
Use glDrawArrays()
|
2013-05-16 13:42:19 +02:00 |
|
Alessandro Ranellucci
|
09989ab8bd
|
Fix regression in --gcode-arcs
|
2013-05-16 12:54:38 +02:00 |
|
Alessandro Ranellucci
|
521d668712
|
Reduce overlap for bridges. #1090
|
2013-05-16 12:34:24 +02:00 |
|
Alessandro Ranellucci
|
55071e544f
|
Fix brim spacing. #1174
|
2013-05-16 12:29:46 +02:00 |
|
Alessandro Ranellucci
|
fc1a23f5b0
|
Quick and dirty OpenGL mockup
|
2013-05-16 12:09:01 +02:00 |
|
Alessandro Ranellucci
|
bff31d7002
|
Fix split_mesh() not working anymore since analyze() is lazy
|
2013-05-16 11:25:15 +02:00 |
|
Alessandro Ranellucci
|
a94d26b1ce
|
Fix overhang detection for contours
|
2013-05-15 10:50:38 +02:00 |
|
Alessandro Ranellucci
|
575127151b
|
New algorithm for overhang detection
|
2013-05-14 20:19:42 +02:00 |
|
Alessandro Ranellucci
|
90280fe63b
|
Little fix for bridge rendering in SectionCut
|
2013-05-14 20:11:05 +02:00 |
|
Alessandro Ranellucci
|
967d567db0
|
Fix bridge rendering in SectionCut
|
2013-05-14 19:48:52 +02:00 |
|
Alessandro Ranellucci
|
632652d924
|
Unfinished work for displaying bridge paths in section cuts
|
2013-05-14 19:48:47 +02:00 |
|
Alessandro Ranellucci
|
06ad6b70f8
|
Bugfix: scaling object from the plater applied scale factor over the factor used in the previous slicing job. #1075
|
2013-05-14 16:31:50 +02:00 |
|
Alessandro Ranellucci
|
7eff002e21
|
Memory and speed optimization: only study meshes when needed
|
2013-05-14 14:47:00 +02:00 |
|
Alessandro Ranellucci
|
e51dbb994d
|
One more speed optimization in STL.pm
|
2013-05-14 14:17:46 +02:00 |
|
Alessandro Ranellucci
|
745cea8e6c
|
One more little speed optimization in STL.pm
|
2013-05-14 14:12:32 +02:00 |
|
Alessandro Ranellucci
|
25bafe7ff1
|
Memory (and maybe speed?) optimization in STL reader
|
2013-05-14 13:54:25 +02:00 |
|
Alessandro Ranellucci
|
4121a7ece5
|
Set support material enforce layers to 0 when spiral printing
|
2013-05-14 13:54:24 +02:00 |
|
Mark Hindess
|
7979dd9e9c
|
Avoid expensive TriangleMesh BUILD method during clone.
Gives 6% speedup and uses less memory when slicing yoda.stl and should
give significantly bigger speedup on more complex models and plates.
|
2013-05-13 21:27:55 +01:00 |
|
Alessandro Ranellucci
|
a86c48d85c
|
Disable retract on layer change when doing spiral vase; also check that we're printing a single-material object
|
2013-05-13 21:55:34 +02:00 |
|
Alessandro Ranellucci
|
a73020c10e
|
Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898
|
2013-05-13 21:22:57 +02:00 |
|
Alessandro Ranellucci
|
ccdb29ddc9
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|