Commit Graph

4964 Commits

Author SHA1 Message Date
bubnikv
ee4b9ab82f Select standard camera views (left / right / top / bottom / front / rear / default)
by menu.
2016-10-05 14:13:07 +02:00
bubnikv
5268574ade Made the sheath around the base support configurable. Without the sheath
it is easier to remove the support, but the support is more fragile.
2016-10-04 14:38:13 +02:00
bubnikv
5bb37ad2c4 A new feature "support_material_buildplate_only" implemented.
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
2016-10-04 13:54:10 +02:00
bubnikv
ae2bae137a Added a low layer slider into the 3D preview window.
This is to limit the preview to a span of layers.
2016-10-03 17:01:29 +02:00
bubnikv
b7af7276c9 Instantiate the new C++ filler. It will be used for the supports first. 2016-10-03 16:59:00 +02:00
bubnikv
d2635ab799 Finished merging of bridging regions. 2016-09-30 16:11:19 +02:00
bubnikv
3a81e6bee4 Bugfix of bottom bridges. If close regions shall be closed by bridges,
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
2016-09-30 15:23:18 +02:00
bubnikv
b5e24d3527 Fix of a test case of PerimeterGenerator. 2016-09-28 11:17:59 +02:00
bubnikv
403329db49 Misc bugfixes. 2016-09-26 13:58:47 +02:00
bubnikv
790b640521 Visualization of fill surfaces. 2016-09-26 13:56:24 +02:00
bubnikv
e0d1aa8a1a Collect the perimeter surfaces when generating perimeters.
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
2016-09-26 13:44:23 +02:00
bubnikv
8f04f5d5f6 Don't adjust width of infill. It produces dangerously wide fills.
If the infill flow adjustment is enabled, report cases,
where the infill flow grows over the limits.
Make the internal bridging infill 50% sparse.
2016-09-26 13:38:37 +02:00
bubnikv
6950ce3bcf Report when the threading is disabled and when the debugging output
is enabled.

Two new environment variables are respected:
SLIC3R_SINGLETHREADED and SLIC3R_DEBUGOUT.
2016-09-26 12:57:15 +02:00
bubnikv
c514e731da Documented the bridge detector. 2016-09-26 12:53:41 +02:00
bubnikv
feb269c97c G code generator will include marks for the G-code analyzer, so
the path preview will be colored with a fine granularity.
2016-09-26 12:52:40 +02:00
bubnikv
8564ac391c Test case for Bugfix: use Lift-z option for 2. extruder #3385
thanks to
https://github.com/platsch
2016-09-26 12:50:05 +02:00
bubnikv
088b0dab90 Bugfix: use Lift-z option for 2. extruder #3385
Thanks to https://github.com/platsch
https://github.com/alexrj/Slic3r/pull/3392
2016-09-26 12:49:29 +02:00
bubnikv
edc70e27d9 New routines for debugging visualization of surfaces & infills. 2016-09-26 12:45:23 +02:00
bubnikv
4046552dd1 Documented MultiPoint. 2016-09-26 12:44:45 +02:00
bubnikv
758458e5a0 PressureEqualizer - fixed compiler warnings, documented. 2016-09-26 12:44:03 +02:00
bubnikv
4a13efd081 Surface / Surface Collection - optimization routines for filtering,
routines for visualization.
2016-09-26 12:42:44 +02:00
bubnikv
a506030082 Draft of a 3D toolpaths preview. 2016-09-26 12:38:29 +02:00
bubnikv
03b1312f2d G-code analyser, first draft. The G-code analyser will be used
for advanced visualization of the printing paths, including
the extrusion types.
2016-09-26 12:37:54 +02:00
bubnikv
565146d9d1 Fix of a spiral vase with realtive extruder distances enabled.
The clone function is used by the SpiralVase.pm only, so the change
is safe.
2016-09-23 12:59:20 +02:00
bubnikv
6e97b9bb73 Optimization of the layer offsets in 3D visualization. 2016-09-15 12:26:53 +02:00
bubnikv
459a42aab6 Fixed a bug in conditional compilation of the Shiny profiler. 2016-09-15 00:57:40 +02:00
bubnikv
a53bd3dfe9 Generate multiple vertex lists rather than requesting a single huge
memory block.
2016-09-15 00:06:42 +02:00
bubnikv
2a5095a1ea OpenGL support through GLEW. Only active if compiled with SLIC3R_GUI=1. 2016-09-14 16:31:26 +02:00
bubnikv
266e1c4be1 Initial commit of the GLEW library for calling OpenGL from the C++ code. 2016-09-14 14:07:41 +02:00
bubnikv
b1575b4dcb Integration of the Shiny lightweight intrusive profiler. 2016-09-14 11:43:38 +02:00
bubnikv
4c67230436 Documented the purpose of various perl modules. 2016-09-14 11:22:41 +02:00
bubnikv
55218c8c4d Documented.
Fixed rough Z buffer quantization issues with ortographic camera.
Initial implementation of a perspective camera.
2016-09-14 09:38:59 +02:00
bubnikv
17d9c8c9dd fixes for gcc: Missing include float.h 2016-09-13 15:59:23 +02:00
bubnikv
7d56827e26 updated for older gcc 2016-09-13 15:29:31 +02:00
bubnikv
f73ca007e6 Fixed compilation on old gcc. 2016-09-13 15:15:44 +02:00
bubnikv
15c1edd552 Configurable volumetric extrusion rate slope. 2016-09-13 15:02:28 +02:00
bubnikv
620c6c7378 Ported from the playground branch. Various documentation and optimization. 2016-09-13 13:30:00 +02:00
bubnikv
a5b7f14dfa Updates in the C++ infill code. 2016-09-13 11:26:38 +02:00
bubnikv
b2a6f43923 Documented perl modules. 2016-09-13 11:24:55 +02:00
bubnikv
6dfe4c0b96 Debugging code: Storing the test STLs inlined in the Perl code into a file. 2016-09-13 09:48:29 +02:00
bubnikv
068f71847e Some inlining optimizations. 2016-09-13 09:46:41 +02:00
bubnikv
c443f49da3 Fix in splitting the loop at a new point. 2016-09-13 09:44:30 +02:00
bubnikv
f518e0675c Initial commit of the new Pressure Equalizer, the EdgeGrid
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
bubnikv
73cbb4b5dc some optimizations of Point rotation 2016-09-12 13:52:31 +02:00
bubnikv
9a83d4e8d5 Reverted some now unnecessary changes. Reverted the infill to the original perl implementation. 2016-09-12 13:26:17 +02:00
bubnikv
9fcc8fe9ae Meged with release_candidate_1_3 2016-09-12 11:29:39 +02:00
bubnikv
ca98e2655a New command line option: --dont-arrange
Don't arrange the objects on the build plate. The model coordinates
define the absolute positions on the build plate.
The option --print-center will be ignored.

Also there is a fix in the command line invocation of --duplicate-grid
so it will run, but still there is something broken there and the results
are not correct.
2016-09-05 11:32:58 +02:00
bubnikv
ab357c75a5 Updated xs/Build.PL to support Visual Studio compiler suite.
Updated xs/Build.PL to understand BOOST_LIBRARY_PATH and
BOOST_INCLUDE_PATH environment variables. This way one may easily
switch between various boost builds.

Some minor tweeks were done to make Slic3r compile with
Visual Studio 2013.
2016-08-21 21:46:17 +02:00
bubnikv
bd23fe9c44 Fixed a crash in a constructor of FullPrintConfig due to an incorrect use
of virtual inheritance. Note that an invocation of ConfigBase::optptr()
is routed to FullPrintConfig::optptr() for all classes of the FullPrintConfig
hierarchy. FullPrintConfig::optptr() in turn invokes optptr()
of PrintObjectConfig, PrintRegionConfig, PrintConfig and HostConfig.
Due to the use of virtual inheritance, this all happens, when
PrintObjectConfig gets constructed as part of FullPrintConfig, but
at that time PrintRegionConfig, PrintConfig and HostConfig are not
constructed yet. Accessing them at that time leads to crashes,
when compiled with Visual Studio 2013 compiler. For some reason
the code generated by gcc does not crash, but I believe the behavior
is undefined and it is better to be fixed anyway.

The patch solves the problem by calling set_defaults() by the topmost
object, which not only fixes the crashes, but also avoids repeated
initialization.
2016-08-21 19:09:31 +02:00
bubnikv
3e8575c931 Documented the build process 2016-06-27 15:28:13 +02:00