Alessandro Ranellucci
|
2aa786c95f
|
Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect)
|
2012-03-26 19:47:21 +02:00 |
|
Alessandro Ranellucci
|
69942d2076
|
Bugfix: certain values of first layer height ratio caused slicing errors
|
2012-03-11 16:31:39 +01:00 |
|
Alessandro Ranellucci
|
d0807aa807
|
Allow to use config options in start/end G-code
|
2012-03-03 23:29:08 +01:00 |
|
Alessandro Ranellucci
|
f2032686da
|
Ensure fan is turned off at start if disable_fan_first_layers > 0
|
2012-03-03 23:18:02 +01:00 |
|
Michael Moon
|
35e7877437
|
bed temperature handling. TODO: gui elements
|
2012-03-03 23:08:50 +01:00 |
|
Alessandro Ranellucci
|
2c16509e8a
|
Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237
|
2012-03-03 22:28:44 +01:00 |
|
Alessandro Ranellucci
|
06c22c9db3
|
New --fan-always-on option. #241 #110
|
2012-03-03 22:21:30 +01:00 |
|
Alessandro Ranellucci
|
c7006fed26
|
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
|
2012-03-03 22:16:38 +01:00 |
|
Alessandro Ranellucci
|
b5cba48e55
|
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
|
2012-03-03 21:27:33 +01:00 |
|
Alessandro Ranellucci
|
f0e434f8c1
|
Fix typo in previous commit and in config options. #234
|
2012-02-28 22:04:48 +01:00 |
|
Alessandro Ranellucci
|
0520d1645b
|
Bugfix: retraction wasn't triggered when moving between copies. #232
|
2012-02-28 21:55:32 +01:00 |
|
Alessandro Ranellucci
|
79bc2240fb
|
Use first layer temperature for M109 too
|
2012-02-26 15:09:28 +01:00 |
|
Alessandro Ranellucci
|
dccd7d19a9
|
First layer temperature. #134
|
2012-02-26 14:54:38 +01:00 |
|
Alessandro Ranellucci
|
170d29a789
|
New --cooling option and checkbox to enable/disable fan and cooling control
|
2012-02-25 21:56:36 +01:00 |
|
Alessandro Ranellucci
|
70e69be60a
|
Bugfix: support material was generated under most bridges
|
2012-02-25 21:39:01 +01:00 |
|
Alessandro Ranellucci
|
1d0a852679
|
Cooling and fan control. #110
|
2012-02-25 21:01:00 +01:00 |
|
Alessandro Ranellucci
|
f4fde54bf3
|
Add extrusion multiplier to gcode comments. #222
|
2012-02-25 19:24:46 +01:00 |
|
Alessandro Ranellucci
|
848bf91244
|
Multithreaded support material generation
|
2012-02-25 16:51:08 +01:00 |
|
Alessandro Ranellucci
|
cc695c6c22
|
Support material: refactoring
|
2012-02-25 16:23:41 +01:00 |
|
Alessandro Ranellucci
|
eba7c10018
|
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
|
2012-02-25 14:46:21 +01:00 |
|
Alessandro Ranellucci
|
94e673e050
|
Backwards compatibility for people using relative E distances on RepRap firmwares
|
2012-02-24 23:12:16 +01:00 |
|
Alessandro Ranellucci
|
555c23069d
|
New --post-process option. Includes some cleaning of the STDOUT messages
|
2012-02-20 12:50:05 +01:00 |
|
Alessandro Ranellucci
|
ae35df716f
|
Little refactoring, new TriangleMesh->align_to_origin method
|
2012-02-20 11:47:21 +01:00 |
|
Alessandro Ranellucci
|
615bcb27dd
|
New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158
|
2012-02-20 11:44:30 +01:00 |
|
Alessandro Ranellucci
|
94a2585b97
|
Dual extruder for support material
|
2012-02-19 17:02:49 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
e0e2023a5a
|
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
|
2012-02-19 10:48:58 +01:00 |
|
Alessandro Ranellucci
|
a9e7204fc6
|
New slicing algorithm based on a topological approach rather than numeric. It should be much more robust
|
2012-02-18 20:36:14 +01:00 |
|
Alessandro Ranellucci
|
f814ccf062
|
Refactoring: use indexed vertices
|
2012-02-17 13:56:17 +01:00 |
|
Alessandro Ranellucci
|
68f001a7de
|
Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled
|
2012-02-14 21:57:53 +01:00 |
|
Alessandro Ranellucci
|
74c71b4ef2
|
Acceleration control. #185
|
2012-02-10 14:53:44 +01:00 |
|
Alessandro Ranellucci
|
ad8c9d4ea1
|
Bugfix: model with rounded walls had small useless infill regions. #177
|
2012-02-10 14:42:54 +01:00 |
|
Henrik Brix Andersen
|
121895d3fc
|
Add support for notes field in configuration profiles. #130
|
2012-02-05 20:55:17 +01:00 |
|
Alessandro Ranellucci
|
4a9672bd88
|
Use about 40% less memory
|
2012-01-28 21:52:31 +01:00 |
|
Alessandro Ranellucci
|
a4194554c9
|
Write single wall width (extrusion width) to the G-code file
|
2012-01-21 17:02:55 +01:00 |
|
Alessandro Ranellucci
|
a0ebee2ca3
|
Warn if no layers were detected
|
2012-01-21 11:34:03 +01:00 |
|
Alessandro Ranellucci
|
92cdaf2f2d
|
Retract at end of print
|
2012-01-20 14:48:51 +01:00 |
|
Alessandro Ranellucci
|
bba91fc0a5
|
Some better debug messages and a note about self-intersecting polygons. #160
|
2012-01-18 18:59:34 +01:00 |
|
Alessandro Ranellucci
|
0184b0f205
|
Fixed many little things that were not updated along with recent large refactoring. #157 #144
|
2012-01-11 20:13:26 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
4b2bd7f779
|
Bugfix: wrong month number in output
|
2011-12-30 18:57:58 +01:00 |
|
Alessandro Ranellucci
|
f08ebe97b2
|
Bugfix: fatal error for some models and thin walls not considered for skirt
|
2011-12-30 18:51:48 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
55045e0437
|
Limit skirt height to the print height. #128
|
2011-12-22 11:57:26 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
f5eb4f03e1
|
Skirt can be disabled by either setting skirts to 0 or skirt-height to 0
|
2011-12-16 09:55:13 +01:00 |
|
Alessandro Ranellucci
|
b422537cc4
|
Bugfix: do not die when no layers are detected at all
|
2011-12-15 20:36:46 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
869cb48c1a
|
Merge branch 'master' of github.com:alexrj/Slic3r
|
2011-12-12 17:35:18 +01:00 |
|
Alessandro Ranellucci
|
3c2b2cfef2
|
Bugfix: duplicate options did not work correctly for copies > 2. #113
|
2011-12-12 17:32:45 +01:00 |
|
Richard Goodwin
|
557afcc4b1
|
Added scale to settings output
|
2011-12-11 15:32:47 -06:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
1f64a01ed4
|
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
|
2011-12-08 10:25:19 +01:00 |
|
Alessandro Ranellucci
|
525855dc7d
|
Bugfix: fatal error when combining infills. #96
|
2011-12-07 20:15:08 +01:00 |
|
Alessandro Ranellucci
|
2ba513bdb2
|
Bugfix: after recent changes, objects had slight dimension errors. #56
|
2011-12-05 18:48:48 +01:00 |
|
Alessandro Ranellucci
|
3d0cde2fce
|
Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28
|
2011-12-05 13:01:02 +01:00 |
|
Alessandro Ranellucci
|
eb64cc4965
|
More fixes for bridges. #58
|
2011-12-04 18:37:37 +01:00 |
|
Alessandro Ranellucci
|
0aff5fab24
|
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
|
2011-12-04 16:24:46 +01:00 |
|
Alessandro Ranellucci
|
4fe340cc56
|
Many fixes to the bridge direction detection algorithm and other things. #58
|
2011-12-03 18:31:31 +01:00 |
|
Alessandro Ranellucci
|
792960aae1
|
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
|
2011-12-02 23:35:39 +01:00 |
|
Alessandro Ranellucci
|
52c9897eda
|
New --extrusion-axis option; removed --no-extrusion
|
2011-12-01 22:34:21 +01:00 |
|
Alessandro Ranellucci
|
830965fc0b
|
Note used settings in exported gcode. #52
|
2011-12-01 22:20:48 +01:00 |
|
Alessandro Ranellucci
|
2a02d26ca5
|
Fixed regression: fill density = 0 was preventing extra solid layers. #75
|
2011-12-01 21:15:02 +01:00 |
|
Alessandro Ranellucci
|
b03afc7f1c
|
Bugfix: some bridges were not detected correctly. #57
|
2011-11-30 20:32:28 +01:00 |
|
Alessandro Ranellucci
|
42383dec84
|
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
|
2011-11-30 16:28:09 +01:00 |
|
Alessandro Ranellucci
|
d51a37a0ae
|
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
|
2011-11-30 16:07:31 +01:00 |
|
Alessandro Ranellucci
|
d168ecbb4e
|
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
|
2011-11-29 10:15:50 +01:00 |
|
Alessandro Ranellucci
|
975387d953
|
New --bridge-feed-rate option. #68
|
2011-11-28 18:37:53 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
afd8e0a1bd
|
Bugfix: setting temperature to zero didn't remove it from output
|
2011-11-26 15:11:11 +01:00 |
|
Alessandro Ranellucci
|
f3b689d4e0
|
Bugfix: infill every 'n' layers was broken after recent changes
|
2011-11-25 18:16:31 +01:00 |
|
Alessandro Ranellucci
|
47d347e1b2
|
Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
|
2011-11-24 12:53:09 +01:00 |
|
Alessandro Ranellucci
|
8598b66b0a
|
Large refactoring. Cleaner logic, smaller memory footprint.
|
2011-11-23 12:29:27 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
d13a0e2503
|
Bugfix: no top surfaces when they were too close to bridges
|
2011-11-22 21:45:05 +01:00 |
|
Alessandro Ranellucci
|
84d9f5fd9d
|
Bugfix: some regions near bridges were left blank. #58
|
2011-11-21 21:05:00 +01:00 |
|
Alessandro Ranellucci
|
00beb7e118
|
Merge branch 'new-bridges'
|
2011-11-21 12:49:41 +01:00 |
|
Alessandro Ranellucci
|
d6ed9c6f34
|
Disable retraction when moving over infill space. #29
|
2011-11-21 12:37:12 +01:00 |
|
Alessandro Ranellucci
|
ed9b4e829c
|
Add a M109 for temperature control
|
2011-11-19 17:37:04 +01:00 |
|
Alessandro Ranellucci
|
4a9fc942cb
|
Add a M109 for temperature control
|
2011-11-19 17:32:37 +01:00 |
|
Alessandro Ranellucci
|
a1c766cc52
|
New bridging logic, more robust. #58
|
2011-11-19 16:44:24 +01:00 |
|
Alessandro Ranellucci
|
8aca717209
|
Print solid infill without cutting an internal surface under small regions such as pillars. #39
|
2011-11-16 16:35:20 +01:00 |
|
Alessandro Ranellucci
|
47c0da8110
|
Bugfix: some solid layers were skipped. #47
|
2011-11-16 14:53:30 +01:00 |
|
Alessandro Ranellucci
|
55f00fdb35
|
Little refactoring, removing useless methods
|
2011-11-16 10:16:01 +01:00 |
|
Alessandro Ranellucci
|
2abd8fe240
|
Bugfix: bottom layer speed settings were ignored.
|
2011-11-15 12:02:31 +01:00 |
|
Alessandro Ranellucci
|
e65349469b
|
Disable M104 if temperature is 0
|
2011-11-15 12:00:09 +01:00 |
|
Alessandro Ranellucci
|
9e42158582
|
Remove G92 E0 if --no-extrusion was supplied
|
2011-11-14 18:14:12 +01:00 |
|
Alessandro Ranellucci
|
8f32ee8f5a
|
Bugfix: recent changes broke the "Infill every N layers" feature
|
2011-11-13 21:46:32 +01:00 |
|
Alessandro Ranellucci
|
097b8d9acb
|
New --skirt-height option. #11
|
2011-11-13 18:41:12 +01:00 |
|
Alessandro Ranellucci
|
76dfda3b09
|
Comment for M104 was erroneously saying that it would wait for temperature. #49
|
2011-11-13 18:22:33 +01:00 |
|
Alessandro Ranellucci
|
a13e4c6fb5
|
Detect membranes (solid parts generating both a bottom and a top surface on the same layers) and don't infill twice. #28
|
2011-11-12 11:05:32 +01:00 |
|
Alessandro Ranellucci
|
c5d5e4d244
|
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
|
2011-11-12 10:18:20 +01:00 |
|
Alessandro Ranellucci
|
fec816b065
|
Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring.
|
2011-11-11 10:21:48 +01:00 |
|
Alessandro Ranellucci
|
0b42139e54
|
Print first layer at Z = 1 * layer_height instead of zero like it was until now. #17
|
2011-11-07 16:04:27 +01:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
54cc6216a1
|
Bugfix: extrusion distance wasn't reset at print start, causing a possible huge retraction.
|
2011-10-17 21:38:41 +02:00 |
|
Alessandro Ranellucci
|
5090ae561c
|
Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects
Large refactoring. Speed gains. Removed convex hull for bridges.
|
2011-10-15 21:14:13 +02:00 |
|