Enrico Turri
f88cc6a5c1
Merge branch 'et_multivolume_models' of https://github.com/prusa3d/Slic3r
2019-02-28 11:24:35 +01:00
bubnikv
dc0c58a9c5
Improvement of the initial placement of modifier meshes:
...
Sphere and Cylinder are scaled to the same volume as Box
Newly entered modifier meshes are rotated parallell to the world coordinates.
If the instance coordinate system is rotated and scaled, it is not possible
to create an unskewed modifier to world transformation. In that case
the best possible transformation is found to minimize least squares error
of the 8 corners of the new modifier mesh bounding box using
Levenberg-Marquardt algorithm.
FIXME:
1) The Levenberg-Marquardt non-linear least squares does not converge
nicely, it may require some tuning.
2) Above all, if 1) is called, then often the skew of the modifier mesh
is so high, that it is likely more useful to display the modifier
with zero rotation and inverse scaling, so that the modifier will be
of correct size, but not parallel to the world coordinates.
2019-02-28 11:20:01 +01:00
bubnikv
3053010446
Bumped up the alpha version number.
2019-02-28 11:11:13 +01:00
Enrico Turri
4b6ab84dbc
Code cleanup
2019-02-28 09:37:55 +01:00
Enrico Turri
44b2ca8182
2nd attempt to fix rendering of printbed svg textures on Mac
2019-02-28 09:04:17 +01:00
Enrico Turri
7a522fbbca
Merge branch 'master' of https://github.com/prusa3d/Slic3r into et_multivolume_models
2019-02-28 08:22:18 +01:00
Lukas Matena
4eb4e40746
SLA gizmo keeps track of current status of the points, enables the user to erase all points
2019-02-27 16:23:10 +01:00
Enrico Turri
16e1d3c816
Merge branch 'master' of https://github.com/prusa3d/Slic3r into et_multivolume_models
2019-02-27 15:19:22 +01:00
Enrico Turri
68805fc63a
Small refactoring in Bed3D and GLShader
2019-02-27 15:19:03 +01:00
YuSanka
a76bd40c62
Fixed a preview mode selection after updating of a PrusaDoubleSlider
2019-02-27 13:39:25 +01:00
Enrico Turri
6e9c030f17
Merge branch 'master' of https://github.com/prusa3d/Slic3r into et_multivolume_models
2019-02-27 11:09:58 +01:00
bubnikv
773f1c35cf
Fixed Linux build, the old GCC compiler does not support
...
std::defaultfloat yet
2019-02-27 11:08:58 +01:00
YuSanka
72986239ce
Fixed an assert from PrusaDoubleSlider
2019-02-27 11:05:59 +01:00
Enrico Turri
3c39e1a618
Attempt to fix rendering of printbed svg textures on Mac
2019-02-27 10:46:52 +01:00
bubnikv
6066f7b7c5
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-27 10:32:10 +01:00
bubnikv
fb91232d10
Fix of Model is marked as defective after opening project #1863
...
Fixes SPE-613
2019-02-27 10:31:53 +01:00
Lukas Matena
bb533e386a
Fixed shortcut for [M]ove gizmo (accidentally overridden by a shortcut for [M]anual changes of SLA support points)
2019-02-27 10:12:54 +01:00
bubnikv
3a1923e4f1
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-27 08:49:33 +01:00
bubnikv
878ef5eee0
Improvement of automatic SLA supports: Don't put support points
...
on vertical walls.
2019-02-27 08:49:09 +01:00
YuSanka
a398cbf24c
Fixed "color print" issues (SPE-836)
2019-02-26 15:55:27 +01:00
Enrico Turri
2f205dd77b
Fix of #1853 (Translation of volumes in side view)
2019-02-26 12:31:49 +01:00
bubnikv
93eac724c9
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-26 11:50:57 +01:00
bubnikv
f3b33eac50
Yet another fix of keyboard / mouse focus on the 3D scene.
2019-02-26 11:50:45 +01:00
YuSanka
5cc86c49b9
Added tooltips for mode buttons.
...
+ some clean of an unused code
+ fix of #1861
2019-02-26 10:50:00 +01:00
Vojtech Kral
7067cef812
imgui: Take orange color radiance down a notch
2019-02-25 17:45:04 +01:00
bubnikv
0f96213dce
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-25 17:09:55 +01:00
bubnikv
feef5608b9
Workaround for mouse events sent out of order
...
(mouse button down being sent before mouse enter)
2019-02-25 17:09:44 +01:00
tamasmeszaros
61f8e4f6f7
Merge branch 'tm_colldetection_upgr'
...
This branch is unfinished but it is better compared to current state.
2019-02-25 16:46:23 +01:00
tamasmeszaros
2b03c25bc6
Pad "tilt" changed to "slope"
2019-02-25 16:04:46 +01:00
bubnikv
f23919985f
Renamed the SLA output file to ".sl1"
2019-02-25 15:01:39 +01:00
tamasmeszaros
03079381e1
Merge branch 'master' into tm_colldetection_upgr
2019-02-25 13:24:43 +01:00
tamasmeszaros
e38522b3c1
Tiny cosmetics
2019-02-25 13:24:01 +01:00
Lukas Matena
bb3819fd18
SLA support gizmo hotkeys added (A,M,Esc,Enter)
2019-02-25 13:04:05 +01:00
tamasmeszaros
01c9b13ade
Disabling pad edge radius and adding the "wall tilt" parameter.
2019-02-25 12:06:38 +01:00
Vojtech Kral
3aee6ddc4c
Attempt to fix 3D scene popup menu on Linux
2019-02-25 10:35:51 +01:00
bubnikv
05baa4b743
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-25 10:21:35 +01:00
bubnikv
a0d256f9f7
Restart background processing for all steps on G-code export and send to
...
octoprint for SLA if the slicing for a single object only is active.
2019-02-25 10:21:12 +01:00
YuSanka
2ff9505443
Fixed wrong updating of the editable ComboBox under OSX
2019-02-25 10:15:44 +01:00
bubnikv
b4a61a3acb
Fixed unit test after splitting the external fill pattern to top/bottom.
2019-02-25 09:11:20 +01:00
bubnikv
6c2beeec36
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-25 08:55:56 +01:00
bubnikv
37f96db9fe
Fixed Perl bindings
2019-02-25 08:55:25 +01:00
Vojtech Kral
0e1e87e0ad
Update preset bundle
2019-02-22 17:26:25 +01:00
bubnikv
a81d51d905
Removed unnecessary saving of slicer.ini
2019-02-22 17:18:58 +01:00
bubnikv
a1fdbf213c
Merge remote-tracking branch 'origin/ys_bf_updating'
2019-02-22 16:56:20 +01:00
bubnikv
c4d14f02be
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-22 16:16:53 +01:00
bubnikv
7b65803cb3
Fix of SPE-832
...
Workaround for a wxWidget bug, where the mouse down event comes
before mouse enter event after a pop-up menu is closed.
2019-02-22 16:16:04 +01:00
Vojtech Kral
4f63f65d3d
Firmware Updater: Handle messages in non-UTF-8 encoding on Windows
2019-02-22 16:11:14 +01:00
Vojtech Kral
91ccdb0a4d
Firmware Updater: Log avrdude arguments
2019-02-22 16:11:13 +01:00
bubnikv
ed5598f59f
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-02-22 15:25:44 +01:00
bubnikv
ab30370fb4
Split the external infill pattern to separate top / bottom config values.
...
Based on f9344a00e3
thanks @supermerill
Implements #475 , #479 , #1133 , #1474
2019-02-22 15:25:35 +01:00