7960 Commits

Author	SHA1	Message	Date
Scott Lahteine	9a4af6bd7c	Add NANODLP_ALL_AXIS to config examples	2017-12-15 16:05:29 -06:00
robpower	59265034ae	Extended NanoDLP_Z_Move_Sync feature to G4 and G28, Added optional move_sync for all axis.	2017-12-15 16:05:29 -06:00
teemuatlut	0ac0324af2	[1.1.x] TMC driver update (#8712)	2017-12-15 15:02:39 -06:00
Scott Lahteine	f38f2ace5a	Correct unskew, after all	2017-12-15 14:23:20 -06:00
Dave Johnson	817eb5a5ba	Missing HAS_HEAT_BED conditional ... Fixes issue found in #8779	2017-12-15 11:36:36 -08:00
Scott Lahteine	f36f91dfb5	Reduce code with no heated bed	2017-12-13 17:59:17 -06:00
Scott Lahteine	172ea8c71c	General code/bitmaps cleanup	2017-12-13 17:57:54 -06:00
Scott Lahteine	da9748fb21	Fix Planner::unskew parity with skew	2017-12-13 17:43:07 -06:00
Scott Lahteine	8519451161	Comment, improve filament width sensor	2017-12-13 02:35:23 -06:00
Scott Lahteine	7c1adff8ad	Separate Dual X un-park from movement	2017-12-11 03:12:59 -06:00
Scott Lahteine	eca1509cb2	Skew should apply per-segment ... Segmented moves can account for skew points off the edge, while long regular cartesian moves may be off if the skewed destination point is outside movement bounds. Followup to #8729	2017-12-11 03:12:59 -06:00
Scott Lahteine	bdf69db0a8	Extend Skew Correction to UBL	2017-12-11 01:31:14 -06:00
Scott Lahteine	5cce532a29	One or the other?	2017-12-11 00:20:29 -06:00
Scott Lahteine	a20eacaa48	UBL devel debugging flag	2017-12-11 00:20:29 -06:00
Scott Lahteine	4f042533a5	Fix DUAL_X_CARRIAGE with UBL segmented	2017-12-11 00:20:29 -06:00
Scott Lahteine	6e8da93c42	UBL_DELTA => UBL_SEGMENTED	2017-12-11 00:20:29 -06:00
Scott Lahteine	bb33a26e62	Apply const to axis args	2017-12-11 00:20:29 -06:00
Scott Lahteine	da2eaa6b09	Use array refs where possible	2017-12-11 00:20:29 -06:00
Scott Lahteine	8244284116	_buffer_line => buffer_segment	2017-12-11 00:20:28 -06:00
Scott Lahteine	08d9aeff41	Update current position in M852	2017-12-10 23:05:34 -06:00
Scott Lahteine	aa1b4eded6	Have M420 report a changed position	2017-12-10 23:05:34 -06:00
Scott Lahteine	684692091e	Sync and report changed position	2017-12-10 23:05:34 -06:00
Scott Lahteine	ccca1ade2d	Always report position on config load/reset	2017-12-10 23:05:33 -06:00
Scott Lahteine	dc9e469c4c	Tweak M114 detail	2017-12-10 19:15:37 -06:00
Bob-the-Kuhn	ec028bf747	[Bugfix-1.1.x] initial step correction (#8735) ... * tested * forgot one item	2017-12-09 18:20:25 -06:00
Scott Lahteine	009920f393	Followup to #8713	2017-12-09 08:06:22 -06:00
Scott Lahteine	666d95285b	Mention that segments interpolate more	2017-12-09 06:18:41 -06:00
jkur	f4c31565bc	Board definition and PIN assignments for Mini RAMBo1.0a	2017-12-08 23:41:34 -06:00
Scott Lahteine	cf0604da07	Use MB() for Megatronics 3.1	2017-12-08 23:39:47 -06:00
Scott Lahteine	55acb65e27	Updates for stepper parity with 2.0.x ... Matching changes from #8725	2017-12-08 23:07:52 -06:00
Scott Lahteine	77519e9f14	Tweaks to planner.h	2017-12-08 21:11:17 -06:00
AnHardt	22baf3356a	Apply @AnHardt reverse_pass changes ... Plus: 3 times 2 float / to 1 float / and 2 float * and, reciprocal is an optimized operation	2017-12-08 21:11:17 -06:00
Bob-the-Kuhn	360c553228	Merge pull request #8718 from Bob-the-Kuhn/1.1x-planner-speed-improvemenr ... [bugfix-1.1.x] minor planner.cpp speed improvement (follow up to COREXY stutter changes PR #8697)	2017-12-08 18:40:41 -06:00
Scott Lahteine	b4d69527e6	Followup to #8716	2017-12-08 18:18:06 -06:00
Scott Lahteine	4aba382b01	Merge pull request #8715 from thinkyhead/bf1_followup_8713 ... Followup to #8713	2017-12-08 18:14:57 -06:00
Bob-the-Kuhn	6f38814541	speed improvement	2017-12-08 18:02:57 -06:00
Scott Lahteine	7251850028	Followup to #8713 ... Fix indentation, use min for constraint, remove obsolete error check	2017-12-08 17:52:44 -06:00
Scott Lahteine	6eb268f63f	Remove old UBL description text	2017-12-08 17:52:44 -06:00
Jonathan Barchi	ae547c3044	Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI	2017-12-08 15:33:24 -08:00
Roxy-3D	23dd2cb6e7	Better off mesh behavior for UBL (#8713) ... * Better off mesh behaviour for UBL * Spacing changes...	2017-12-08 16:36:03 -06:00
Scott Lahteine	8385cddd8d	Followup to #8705	2017-12-08 03:48:24 -06:00
Scott Lahteine	75eb93140f	Discard all CONTINUED blocks on interrupted move	2017-12-08 02:13:51 -06:00
Scott Lahteine	8be7a0b131	FORCE_INLINE before static	2017-12-08 01:31:59 -06:00
Scott Lahteine	cd6468d6de	Fix TEMP_BED_PIN for Mightyboard Rev.E ... Based on #8685	2017-12-07 21:52:43 -06:00
Scott Lahteine	822254291f	Merge pull request #8702 from bjarchi/fix-1.1.x-probe_bounds ... Fix - Conditionals_post.h - allow overriding of [min,max] probe point	2017-12-07 21:49:04 -06:00
Scott Lahteine	44800e9899	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	2017-12-07 16:46:06 -06:00
Scott Lahteine	6e85c060a9	Apply MULTIPLE_PROBING to example configs	2017-12-07 16:18:53 -06:00
Jonathan Barchi	7c6d33b0d2	Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected	2017-12-07 10:40:32 -08:00
Bob-the-Kuhn	86b65e52c4	[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697)	2017-12-07 00:08:48 -06:00
Scott Lahteine	6310a00d7e	feed_factor => inverse_secs	2017-12-06 23:02:37 -06:00
Scott Lahteine	6b93d20e4e	Sanity-check skew+UBL	2017-12-06 22:56:20 -06:00
Scott Lahteine	909fac6d90	Update commentary on M48	2017-12-06 22:50:13 -06:00
Scott Lahteine	1951d3a37a	Simplify G26 user_canceled	2017-12-06 22:03:46 -06:00
Scott Lahteine	aa7236e03c	Shorten error text in ubl::G29	2017-12-06 21:43:26 -06:00
Scott Lahteine	574153a810	No lcd_map_control needed in quick_stop	2017-12-06 21:43:26 -06:00
Scott Lahteine	3b30cc90f1	Clean on trigger instead of split_first_move flag	2017-12-06 21:43:26 -06:00
Scott Lahteine	1063b3b2b8	Changes for parity with 2.0.x	2017-12-06 21:19:17 -06:00
Scott Lahteine	93560836de	Allow buffer clean without release command	2017-12-06 21:12:55 -06:00
Scott Lahteine	ff26b7446c	Standardize LCD interface code for UBL a little	2017-12-06 21:12:55 -06:00
Scott Lahteine	7b6ad28a5d	General UBL/G26 code cleanup	2017-12-06 21:12:55 -06:00
Scott Lahteine	5d01a2f467	Move temperature reporting to Temperature class	2017-12-06 21:12:55 -06:00
Scott Lahteine	6e197d4a42	Fix M503 S parameter	2017-12-06 21:12:55 -06:00
Scott Lahteine	a5b20fec2f	Whitespace clean	2017-12-06 16:19:49 -06:00
AnHardt	b19846aca1	Don't split first_move while homing or probing ... While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.	2017-12-06 14:56:37 +01:00
Scott Lahteine	d951ba83e6	Show "Level Bed Corners" item with UBL too ... Addressing #8676	2017-12-05 21:56:04 -06:00
Scott Lahteine	203a445bc1	Minimal include for speed_lookuptable	2017-12-05 21:44:59 -06:00
Scott Lahteine	9edefa645d	Remove skew warning that could crash the planner	2017-12-05 20:25:53 -06:00
Scott Lahteine	794f8f1329	Update K1 => PID_K1	2017-12-05 19:59:01 -06:00
revilor	b1f3dfab28	Fix for #8669 (#8677)	2017-12-05 19:40:57 -06:00
Scott Lahteine	2d6c84a817	Cleanup constexpr in planner.cpp	2017-12-05 18:54:25 -06:00
Scott Lahteine	23291a0466	Fix SKEW_CORRECTION without leveling	2017-12-05 18:47:19 -06:00
Scott Lahteine	83a1a70103	Creality pins spacing, MINIPANEL CS pin	2017-12-05 02:00:33 -06:00
Scott Lahteine	47f6fc1e07	Set initial endstops state ... Addressing #8662	2017-12-05 01:08:39 -06:00
kein0r	f36fdc74ac	Added RAMPS v1.4 Plus board ... Conflicts: Marlin/boards.h	2017-12-05 00:43:02 -06:00
Scott Lahteine	ff258d43e7	Merge pull request #8661 from lumbric/bugfix-1.1.x ... Add missing library in Makefile	2017-12-04 23:50:34 -06:00
Scott Lahteine	d8ef6faa80	Cleanup for dogm_bitmaps	2017-12-04 21:19:59 -06:00
Scott Lahteine	59eb77fd28	One fewer move required…	2017-12-04 20:35:33 -06:00
lumbric (antares)	dde0e9ee0a	Add missing library in Makefile ... When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise eeprom functions are not available. Thanks to @rfjakob for finding the crucial hint to solve this issue.	2017-12-05 00:20:58 +01:00
Dave Johnson	860d98a897	[1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices (#8653) ... * SERIAL_XON_XOFF not supported on USB-native AVR devices User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.	2017-12-04 16:48:19 -06:00
Scott Lahteine	000818f5e4	Split first move to planner for better chaining	2017-12-04 15:43:28 -06:00
Scott Lahteine	298a357a43	Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first" ... This reverts commit 0eef0ff0de, reversing changes made to d8582b7506.	2017-12-03 17:49:24 -06:00
Scott Lahteine	44d2c5ef88	Fix M49 console hang	2017-12-03 03:36:12 -06:00
Scott Lahteine	1600f7d4ee	Merge pull request #8635 from fiveangle/bf1_report_xonxoff ... [1.1.x] Report SERIAL_XON_XOFF in M115	2017-12-03 02:19:28 -06:00
Scott Lahteine	71a4c04dd5	Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL ... [1.1.x] Use custom segment length for UBL Cartesian	2017-12-03 01:57:32 -06:00
Scott Lahteine	1d0ee83e18	Split first move to planner for better chaining ... Address #8573, #8595	2017-12-03 01:44:33 -06:00
Scott Lahteine	db8631e49a	Use custom segment length for UBL Cartesian	2017-12-03 00:02:28 -06:00
Unknown	2e295759f2	[1.1.x] Report SERIAL_XON_XOFF in M115 ... -Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts -Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines config updates -Update error checking conditions	2017-12-02 21:02:02 -08:00
Scott Lahteine	d8582b7506	Bring configurations up to date	2017-12-02 21:42:36 -06:00
dot-bob	7f656b867f	Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x (#8614) ... * Add default configuration files for the Wanhao Duplicator 6. * Update Configuration.h	2017-12-02 21:31:14 -06:00
Scott Lahteine	077fed1d88	Fix a homing comment	2017-12-02 20:57:35 -06:00
Scott Lahteine	152c5d2616	Followup to #8613	2017-12-02 20:47:33 -06:00
Scott Lahteine	26c5bbc5a7	Rename inverse_mm_s => inverse_secs	2017-12-02 20:13:31 -06:00
Jonathan Barchi	344e6b857a	configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables (#8630)	2017-12-02 19:04:52 -06:00
Roxy-3D	81e52138cc	More corrections for Bi-Linear to work with G26	2017-12-02 14:13:19 -06:00
Roxy-3D	a27a9b63e4	Get Bi_Linear macros correct to work with G26 ... G26 uses logic that looks like: ``` ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); ``` The Bi-Linear macros need parenthesis to work correctly.	2017-12-02 14:04:41 -06:00
Scott Lahteine	8b7c274db5	Comment/cleanup motion code	2017-12-02 01:42:37 -06:00
Scott Lahteine	7bed539fdb	Fix missing return values in G33_auto_tune	2017-12-02 01:06:14 -06:00
Scott Lahteine	172ce67344	New feature: BED_SKEW_CORRECTION	2017-12-01 19:43:32 -06:00
Scott Lahteine	a8d83aec89	Add SKEW_CORRECTION to example configs	2017-12-01 19:43:31 -06:00
Scott Lahteine	38e5883d44	Apply const to thermal_runaway_protection args	2017-12-01 19:43:31 -06:00
Scott Lahteine	e7c6abd767	Update V45 Settings header	2017-11-30 22:26:21 -06:00
Roxy-3D	9f7405b3f0	Restore correct gMax 1.5+ G26 values	2017-11-30 18:11:01 -06:00
Scott Lahteine	d3f8111fe7	Use some int types in Planner	2017-11-30 18:03:51 -06:00
Scott Lahteine	d1a807fdf8	Drop obsolete Planner::position_float	2017-11-30 17:28:40 -06:00
Scott Lahteine	8df42a84a4	Fix fade bug in (un)apply_leveling	2017-11-30 17:28:40 -06:00
Scott Lahteine	8f462b5717	Add Planner::set_filament_size for 2.0.x parity	2017-11-30 16:52:19 -06:00
Scott Lahteine	68c1f05aeb	Cleanups/changes to led control menu	2017-11-30 00:04:43 -06:00
Scott Lahteine	1f770bb103	Config updates, spacing mainly	2017-11-29 20:57:38 -06:00
Tannoo	e25567a5dd	New feature: LED_CONTROL_MENU	2017-11-29 20:57:38 -06:00
Scott Lahteine	9951f28892	Apply const to some planner vars	2017-11-29 20:57:38 -06:00
Scott Lahteine	80929c2637	Apply SEGMENT_LEVELED_MOVES to example configs	2017-11-29 16:58:16 -06:00
Scott Lahteine	d786fb99e2	Add an option to segment leveled moves	2017-11-29 16:58:15 -06:00
Scott Lahteine	a0fc5f7b52	Minor planner.cpp style changes	2017-11-29 15:00:33 -06:00
Scott Lahteine	ea87cd975d	Tweak to check_axes_activity	2017-11-28 18:39:29 -06:00
Scott Lahteine	fd50f452ff	Whitespace cleanup	2017-11-28 17:49:25 -06:00
Scott Lahteine	6eedb64777	Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves ... [1.1.x] Fix WDTO during long delta moves	2017-11-28 17:27:08 -06:00
Scott Lahteine	46776de90b	Fix M290 boolval bug ... Fix #8577	2017-11-28 17:25:14 -06:00
Scott Lahteine	dfcef11bca	Fix #8579 ... Fan speed code fell into a curly brace	2017-11-28 16:09:37 -06:00
AnHardt	f1757f30cb	Fix Watchdog time out during long lasting DELTA moves ... During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... . The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long. Fixing #7510	2017-11-28 17:10:18 +01:00
Scott Lahteine	ddab1533c5	Simplify midpos calculation	2017-11-27 14:01:42 -06:00
Scott Lahteine	915c4b9ce2	Make MBL work more like PROBE_MANUALLY	2017-11-27 00:09:23 -06:00
Scott Lahteine	d7cc26cc17	Allow override of probe bounds in configs	2017-11-26 20:57:00 -06:00
Scott Lahteine	5bc5ba7ee3	More reliable set characters after bootscreen	2017-11-26 20:02:51 -06:00
Scott Lahteine	82df656cc7	Tweak readDir code	2017-11-26 18:23:34 -06:00
Scott Lahteine	51d09bb9c9	Tweak BLOCK_BUFFER_SIZE config	2017-11-26 17:33:33 -06:00
Scott Lahteine	5a1f1305f0	SD Menu patches	2017-11-26 01:10:06 -06:00
Scott Lahteine	3cf31205bc	Tweaks to bed leveling menus	2017-11-26 00:06:10 -06:00
Scott Lahteine	26a40373fc	Adjustments to blocking moves	2017-11-25 23:32:53 -06:00
Scott Lahteine	6b9e7defac	M211 output in current workspace	2017-11-25 20:47:36 -06:00
Scott Lahteine	a63d9cc550	Loosen HAS_BED_PROBE definition	2017-11-25 20:10:03 -06:00
Scott Lahteine	1e84cded98	Parity with 2.0.x bitmap functions ... Based on #8565	2017-11-25 19:56:22 -06:00
Scott Lahteine	bb0cc1bbbc	Fix gcode_G26 error return	2017-11-25 19:51:03 -06:00
Scott Lahteine	941ffea81c	Fix Micromake C1 config	2017-11-25 18:42:42 -06:00
Scott Lahteine	737cee4b8c	Syntax tweaks	2017-11-25 18:15:16 -06:00
Scott Lahteine	d3165cca4f	Move BABYSTEP_ZPROBE_GFX_OVERLAY up	2017-11-25 17:28:12 -06:00
Scott Lahteine	2060ba3556	M290 report on change, P0 to leave Probe Z Offset unchanged	2017-11-25 16:51:00 -06:00
Scott Lahteine	e56ead5e1c	Followup to G33 patch	2017-11-25 16:01:55 -06:00
LVD-AC	8b9e68c32d	[1.1.x] G33 probe error handing	2017-11-25 15:44:30 -06:00
Scott Lahteine	b2d3fffe74	Patches for M290, M851	2017-11-25 14:10:49 -06:00
Scott Lahteine	b5c5b175f1	Dont use Z_MIN_PROBE_ENDSTOP for DELTA	2017-11-24 18:28:27 -06:00
Thomas Moore	ecf19344f6	Initialize mixing virtual tools to behave like standard a multi-extruder setup (#6853) ... * Initialize mixing virtual tools to behave like standard a multi-extruder setup * Update Marlin_main.cpp * Update Marlin_main.cpp	2017-11-24 18:06:32 -06:00
Scott Lahteine	b2473e57dd	Apply LINEAR_UNIT to M503 output for M200	2017-11-24 17:31:00 -06:00
Scott Lahteine	d38aaa0c7e	Merge pull request #8550 from thinkyhead/bf1_fix_probe_pt ... Fix #8540	2017-11-24 17:15:05 -06:00
Scott Lahteine	adee17847c	Fix #8540 ... Does it?	2017-11-24 17:05:42 -06:00
oliver	a7d82bd73b	MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 23:58:37 +01:00
Scott Lahteine	59a699063a	Fix #8537	2017-11-24 15:54:03 -06:00
Scott Lahteine	ff800e08fd	Phatter arrows for Z offset overlay	2017-11-24 15:54:03 -06:00
Scott Lahteine	c0190eff00	Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x	2017-11-24 15:54:02 -06:00
Scott Lahteine	4e445f2c55	Keep Micromake C1 name on LCD?	2017-11-24 13:18:34 -06:00
Scott Lahteine	9da817eae0	Make LCD_LANGUAGE consistent in all configs	2017-11-24 13:18:34 -06:00
Scott Lahteine	7cf4009838	Fix MK2_MULTIPLEXER stepper indirection ... Addressing #8544	2017-11-24 12:47:10 -06:00
Rob Power	f8e30f49d7	Add NanoDLP Z movement synchronization option ... Implemented synchronization message output for NanoDLP printers (nanodlp.com). If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.	2017-11-24 00:32:03 -06:00
Scott Lahteine	3b431f2f72	Arrange G26 functions in dependency order	2017-11-23 22:30:22 -06:00
Scott Lahteine	e5b43d48ee	Apply G26 for meshes to all configs	2017-11-23 21:41:27 -06:00
Roxy-3D	8282d732c1	Make G26 work with all mesh leveling. ... Example Configuration.h files are not updated yet. You need to cross your settings over to the default Configuration.h file in the \Marlin directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new location in the file.)	2017-11-23 21:41:27 -06:00
Scott Lahteine	82f41d6e46	fix fan kickstart	2017-11-23 21:40:31 -06:00
Scott Lahteine	b8c65078fc	NEOPIXEL_RGBW_LED => NEOPIXEL_LED	2017-11-23 16:41:04 -06:00
Scott Lahteine	04419af419	Reorganize check_axes_activity	2017-11-23 15:29:35 -06:00
Scott Lahteine	ed6a5ff7e5	Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix ... [1.1.x] Tool change bad behaviour fix	2017-11-22 20:23:02 -06:00
Scott Lahteine	956680104b	Tweak char_mode init	2017-11-22 19:10:54 -06:00
Scott Lahteine	99b71c1dde	Move lcd_map_control to UBL ... For parity with bugfix-2.0.x	2017-11-22 18:45:55 -06:00
Scott Lahteine	73ddc762c8	Fix up LCD init / charset	2017-11-22 18:07:03 -06:00
GMagician	7a5b3a1e6a	[1.1.x] Tool change bad behaviour fix ... Just aligned with version 2.0. Here bug was not present	2017-11-22 23:51:07 +01:00
Scott Lahteine	e2568d7589	Fix delta_safe_distance_from_top	2017-11-22 14:11:04 -06:00
Scott Lahteine	0b1d754e7d	Fix G42	2017-11-22 14:11:04 -06:00
Scott Lahteine	bbc2ee6da1	Don't re-init graphical LCD after boot screen ... Followup to 13a3fb1acc	2017-11-21 18:21:50 -06:00
GMagician	b96ceb4256	[1.1.x] tool change bad behaviours ... This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. 2) Since no move no bed level matrix should be applied When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	2017-11-20 16:39:32 -06:00
Scott Lahteine	b6dbc4c5c1	Merge pull request #8426 from SteveGotthardt/bugfixes ... [1.1.x]Update Anet A8 default values from my Anet A8 experience	2017-11-20 15:12:46 -06:00
Bob-the-Kuhn	12b018e619	Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x ... [1.1.x] M43 end pin correction/compatibility	2017-11-19 11:01:10 -06:00
Bob-the-Kuhn	9b80e1e04a	change to L for end pin for M43 Toggle command	2017-11-18 13:48:53 -06:00
Scott Lahteine	bf6a1816b4	Display volumetric ratio in terms of E mm	2017-11-18 07:03:18 -06:00
Scott Lahteine	4f05a66ee1	Fixes #8472	2017-11-18 05:14:31 -06:00
Scott Lahteine	622d100c30	No retroactive changes with M851 Z	2017-11-18 03:37:07 -06:00
Scott Lahteine	74997a5251	Fix comment in planner.h	2017-11-18 02:30:41 -06:00
Roxy-3D	50148f7185	Update the UBL Probable Area for Delta's ... This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.	2017-11-17 16:41:31 -06:00
Scott Lahteine	8f57a3e28a	Apply coding standards to Max7219 code	2017-11-17 15:33:55 -06:00
Scott Lahteine	2511e869e2	Update Configuration.h	2017-11-16 23:18:55 -06:00
Scott Lahteine	aa612124f2	Merge pull request #8452 from tcm0116/1.1.x-pio_deps ... [1.1.x] Fix PlatformIO dependencies	2017-11-16 22:54:15 -06:00
Scott Lahteine	eb3bdb7550	Fix FILAMENT_LCD_DISPLAY, disabled state, optimize	2017-11-16 17:46:08 -06:00
Thomas Moore	97c19de8b9	Fix PlatformIO dependencies	2017-11-16 15:16:21 -06:00
Scott Lahteine	4e19c59ab3	Miscellaneous cleanup	2017-11-16 01:18:05 -06:00
Scott Lahteine	9cf5b96971	Fix M503 output for M145 ... Fixes #7978	2017-11-15 04:00:39 -06:00
Scott Lahteine	69a710fef1	Add OV() macro for thermistor tables	2017-11-15 03:20:36 -06:00
Scott Lahteine	d2613ce077	Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines ... [1.1] Fix 'M32 P' subroutines	2017-11-15 02:31:21 -06:00
Scott Lahteine	f2e222b9e8	Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x ... [1.1.x] Fix Software Fan PWM	2017-11-15 02:29:59 -06:00
Scott Lahteine	a6ee4a0468	Apply SDCARD_SORT_ALPHA changes from 2.0.x	2017-11-15 01:09:13 -06:00
Scott Lahteine	d3b8f30818	Fix M32 P subroutine handling	2017-11-15 01:09:06 -06:00
Scott Lahteine	2390f6d3ab	Cleanup, apply standards to SD lib, cardreader	2017-11-15 01:09:06 -06:00
Scott Lahteine	eacb6b6e8b	Fix parser value handling	2017-11-14 23:23:22 -06:00
Steven Gotthardt	7efffc1548	Update Anet A8 default values from my Anet A8 experience	2017-11-14 10:47:30 -07:00
RowanMeara	10e366ebd7	Change dithering behavior to intended.	2017-11-14 00:36:35 -08:00
Scott Lahteine	95590adf07	Make sure leveled[] is enabled for use	2017-11-14 02:12:20 -06:00
Scott Lahteine	8d06cf7b84	Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:06:35 -06:00
Steven Gotthardt	645b586041	Fix warnings for REPRAPWORLD_KEYPAD	2017-11-13 22:25:17 -06:00
Scott Lahteine	069ec3f9a9	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:06:40 -06:00
Scott Lahteine	56035e9965	Move mesh test options under G26 option	2017-11-13 21:06:40 -06:00
Scott Lahteine	d65c99f38b	Drop unused LARGE_FLASH option	2017-11-13 15:47:03 -06:00
Scott Lahteine	90c7d28055	Extrudrboard support for Printrboard Rev.F	2017-11-13 15:47:03 -06:00
Scott Lahteine	8b684637bc	Merge pull request #8397 from RowanMeara/rm-M428-1.1.x ... [1.1.x] Fix M428	2017-11-13 15:11:36 -06:00
Rowan Meara	d2df00bfca	[1.1.x] Fix compilation warnings (#8395) ... * Fix up Travis CI and compile warnings/errors * No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER * No point in setting all the endstop plugs	2017-11-13 04:18:19 -06:00
Scott Lahteine	25ec0fecfa	Apply native workspace fixes to G92, G53-59	2017-11-13 01:53:44 -06:00
RowanMeara	227b96b28b	Fix M428 ... This fixes the old implementation of M428 which was broken, did not match the website, and made no sense.	2017-11-13 01:34:43 -06:00
Scott Lahteine	a2c013c8c7	Fix LCD pins for Printrboard v1	2017-11-13 00:10:27 -06:00
Scott Lahteine	f27196214b	Fix Printrboard pins for parity with 2.0	2017-11-13 00:03:11 -06:00
Scott Lahteine	aa616cd410	No leveling data in M114 without leveling	2017-11-12 23:06:16 -06:00
Scott Lahteine	5926159890	Fix report_current_position ... Thanks @RowanMeara!	2017-11-12 22:57:57 -06:00
Roxy-3D	c9f88297b8	Provide more clearance for BL-Touch probe	2017-11-12 13:09:10 -06:00
Scott Lahteine	5cc87abb3a	Merge pull request #8381 from thinkyhead/bf1_native_followup ... [1.1] Remove offsets from soft endstops, tool change	2017-11-11 23:13:40 -06:00
Scott Lahteine	355dfed437	Coding standard patch of M290	2017-11-11 22:16:13 -06:00
Scott Lahteine	802ae73b13	Turn off laser power pin when PWM goes to 0	2017-11-11 22:02:19 -06:00
Scott Lahteine	549c814e8d	Remove offsets from soft endstops, tool change	2017-11-11 21:28:32 -06:00
Scott Lahteine	564fbc8dec	M290 constrain patch	2017-11-11 20:50:16 -06:00
Scott Lahteine	df44bcc5ae	Use do_blocking_move_to where possible	2017-11-10 20:37:41 -06:00
Scott Lahteine	3293823642	Add pre-calculated planner.e_factor	2017-11-10 20:09:59 -06:00
Scott Lahteine	24b302c001	Fix cold/lengthy extrusion handling	2017-11-10 20:09:59 -06:00
Thomas Moore	4714fb8fcb	Normalize load/unload length in M600	2017-11-10 19:59:26 -06:00
Scott Lahteine	b0ff3a4c6d	Cleanup around updatePID	2017-11-10 19:17:46 -06:00
Scott Lahteine	7aadfe32e7	Prevent position_is_reachable disaster	2017-11-10 19:17:45 -06:00
LVD-AC	8ce9306b27	PROBE_SELECTED etc.	2017-11-10 19:17:45 -06:00
Scott Lahteine	80682ec61e	Updates Traditional Chinese, rebase for bugfix-1.1.x	2017-11-10 04:49:09 -06:00
Scott Lahteine	deaa70c2cc	Update macros for parity with 2.0.x	2017-11-10 04:32:27 -06:00
Scott Lahteine	7535c21894	Remove some trailing white-space	2017-11-10 03:38:58 -06:00
Roxy-3D	8327667988	Correct gMax 1.5+ nozzle size to the right number ... Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.	2017-11-09 20:00:55 -06:00
Scott Lahteine	b6b4bf0959	Merge pull request #8345 from tcm0116/1.1.x-delta_height ... [1.1.x] Add delta_height variable in lieu of using home_offset	2017-11-09 01:19:48 -06:00
Thomas Moore	658e1ebe5a	Add delta_height variable in lieu of using home_offset	2017-11-08 23:21:02 -06:00
Scott Lahteine	54963cc898	Fix _manual_goto_xy on kinematic systems	2017-11-08 23:18:55 -06:00
Scott Lahteine	ad879a1f90	Clarify some motion code	2017-11-08 23:18:55 -06:00
Scott Lahteine	513f25d42c	Remove redundant dual stepper driver entries	2017-11-08 20:26:54 -06:00
Scott Lahteine	2559745f54	Tweaks to core motion code	2017-11-08 20:08:20 -06:00
Scott Lahteine	7326fe1136	Fix tilt_mesh_based_on_probed_grid output bug	2017-11-08 20:07:02 -06:00
Scott Lahteine	97a43f0c2f	Fix G26 Y position argument	2017-11-08 19:19:21 -06:00
Scott Lahteine	87b655e59e	Fix gcode_get_destination E axis	2017-11-08 12:50:40 -06:00
Roxy-3D	677d490b5c	Add defaults for basic extrusion to Configuration.h files (#8331)	2017-11-08 11:02:47 -06:00
Roxy-3D	6ee4ba6932	We need motion even with !HAS_MESH (#8330) ... Thank You MagoKimbra !	2017-11-08 09:58:18 -06:00
Scott Lahteine	4a857f1af6	Followup to G33/LCD patch #8318	2017-11-08 00:46:30 -06:00
Scott Lahteine	1d0739d6d1	Patch G33 misuse of PROBE_MANUALLY	2017-11-07 22:28:54 -06:00
Scott Lahteine	69a7d4e0a5	Conditionals updates from #7979	2017-11-07 21:20:38 -06:00
Scott Lahteine	5fe15c7f10	Patch abuse of sprintf_P in G33	2017-11-07 17:35:32 -06:00
Rowan Meara	094bebcc2d	[1.1.x] Update Thermal Protection Documentation (#8282) ... * Fix thermal protection documentation. Even before the recent thermal protection changes, the documentation of the thermal protection feature in the config files did not match the implementation. I fixed the documentation and reconciled the M303 implementation with the documentation. * Applied documentation changes to sample config files * Renamed hysteresis to watch_temp_increase * Added gcodes back into documentation.	2017-11-07 15:52:28 -06:00
Scott Lahteine	abb15bc30a	Followup patch for G92	2017-11-07 13:08:38 -06:00
Scott Lahteine	8e18e05d1d	Merge pull request #8309 from thinkyhead/bf1_fixes_for_117 ... [1.1] Fix G92 for native workspace	2017-11-07 12:52:55 -06:00
Scott Lahteine	aa80882bdf	Merge pull request #8306 from Kaibob2/patch-4 ... Length fix and translation	2017-11-07 12:27:37 -06:00
Scott Lahteine	e4466b55b5	Fix G92 for native workspace	2017-11-07 12:27:05 -06:00
Kai	b60efb4230	Length fix and translation ... If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value	2017-11-07 18:16:30 +01:00
Thomas Moore	2f4a42b313	Fix Delta EEPROM	2017-11-07 16:55:06 +00:00
Scott Lahteine	e1ab285435	Fix some section sizes in EEPROM head comment	2017-11-06 22:41:27 -06:00
Scott Lahteine	26ebeadfaa	Eliminate some compiler warnings	2017-11-06 22:41:27 -06:00
Scott Lahteine	30e4b85587	Fix M118 parameters, with strict guideline	2017-11-06 22:41:27 -06:00
Scott Lahteine	44edffa0a9	Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x	2017-11-06 22:40:44 -06:00
Scott Lahteine	ddf5d68815	Fix non-extended font option	2017-11-06 21:43:18 -06:00
Scott Lahteine	298863c2d0	Tweak an EEPROM loop	2017-11-06 20:16:57 -06:00
Rowan Meara	8e8787ad63	Fixed EEPROM CRC (#8283) ... Fix EEPROM reversion.	2017-11-06 19:18:42 -06:00
Roxy-3D	12151e62ee	Fix G26's circle drawing... (#8291) ... * Fix G26's circle drawing... This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0 I'll have to do something similar to get bugfix-v2.0.0 caught up to bugfix-v1.1.x * only use planner.leveling_active if appropriate	2017-11-06 18:26:47 -06:00
Scott Lahteine	efc1029226	Update bilinear for native workspace	2017-11-06 17:03:34 -06:00
Scott Lahteine	1b09733e7c	Fix FWRETRACT un-hop	2017-11-05 18:33:10 -06:00
Scott Lahteine	d8ef9bda18	Fix point_t pointer in Nozzle::zigzag	2017-11-05 18:32:32 -06:00
Scott Lahteine	267c247da7	Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:14:18 -06:00
Scott Lahteine	8ab368559a	Implement CNC_COORDINATE_SYSTEMS	2017-11-04 22:30:23 -05:00
Scott Lahteine	bb111b928b	Add CNC_COORDINATE_SYSTEMS to configs	2017-11-04 22:30:23 -05:00
Scott Lahteine	91abf07087	Cleanup and fix G33	2017-11-04 22:30:23 -05:00
Scott Lahteine	e642a64b68	Prettify some EEPROM code	2017-11-04 22:00:45 -05:00
Scott Lahteine	64f077fd2a	Remove I2CPEM workspace offset	2017-11-04 22:00:45 -05:00
Scott Lahteine	5fefa200ba	Tweaks to cubic_b_sline code style	2017-11-04 22:00:45 -05:00
Kris Kersey	46c2841904	Added support for Anet LCD on Ramps board. ... Working pin map for Anet LCD display. Pins 1 and 2 must be swapped on cable.	2017-11-04 21:30:08 -05:00
Scott Lahteine	f9f0ee0f21	Update G2/G3 Workspace Planes	2017-11-04 14:35:25 -05:00
Scott Lahteine	640526f0c8	Operate in Native Machine Space	2017-11-03 22:40:30 -05:00
Scott Lahteine	9af9596f69	Merge pull request #8241 from machaj/fix-links-to-probes ... Fix probes configuration url	2017-11-03 13:36:20 -05:00
Jan Macháček	0c4e9980fb	Fix probes configuration url	2017-11-03 14:42:02 +01:00
AnHardt	13a3fb1acc	Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' ... Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'. Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'. Move the delays into the related functions. Move the picture loop around 'lcd_kill_screen()' into the function.	2017-11-03 12:16:42 +01:00
Scott Lahteine	343dd1c0b8	Remove G33 trailing whitespace	2017-11-03 04:06:38 -05:00
Scott Lahteine	64029ef8a6	Merge pull request #8179 from thinkyhead/bf1_config_tweak ... [1.1.x] Faster menu navigation for Anet A8	2017-11-03 03:59:21 -05:00
Scott Lahteine	524f4ee0cf	Tweak to M330 thermal protection	2017-11-03 03:57:11 -05:00
Scott Lahteine	34aeaec553	Remove ADKey steps acceleration	2017-11-03 03:42:52 -05:00
Luc Van Daele	0e4b6b373d	[1.1.x] G33 magic numbers (#8173) ... * [1.1.x] G33 magic numbers * oops * comments * oops * warning * better comment section * remarks * extra grids	2017-11-03 03:35:53 -05:00
Scott Lahteine	193a0e9273	pid_autotune parity with 2.0.x	2017-11-03 03:26:47 -05:00
Rowan Meara	39cc36d3f1	[1.1.x] M303 thermal runaway protection (#8209) ... * Added M303 thermal runaway protection Currently, thermal runaway protection is not available during M303. Therefore, if someone plugs the thermistors in incorrectly and goes to autotune their printer, the printer temperature could runaway and damage could occur. * Replace removed line, clarifying its logic	2017-11-03 03:16:39 -05:00
Scott Lahteine	87d3a1ae4d	Merge pull request #8228 from tcm0116/1.0.x-dual_stepper ... [1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers	2017-11-03 03:08:43 -05:00
AnHardt	dcd7949544	Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR	2017-11-03 04:45:13 +01:00
Thomas Moore	277eb16d67	Fix automatic stepper assignment for X/Y/Z dual stepper drivers	2017-11-02 18:50:25 -05:00
jmdearras	c9980c0a5c	Restore MKS_GEN_L ... Removed by accident, I presume, when the file was cleaned up	2017-11-02 12:14:54 -04:00
jmdearras	3e9504d306	Fix case light "off" function (#8205) ... * Fix case light "off" function It would only turn the light off if brightness was 255 * Update Marlin_main.cpp	2017-11-01 21:17:23 -05:00
Scott Lahteine	4bf0e15653	Allow asterisks in G-Code commands ... Addressing #6655	2017-10-31 21:14:56 -05:00
Scott Lahteine	f02ca2a9a3	Organize boards.h by architecture	2017-10-31 16:12:07 -05:00
Scott Lahteine	4fb3ce4739	Support for SilverGate Board	2017-10-31 15:26:27 -05:00
Scott Lahteine	704640bf98	Faster menu navigation for Anet A8 ... Addressing #8166	2017-10-31 14:44:48 -05:00
Scott Lahteine	db6de76acb	Only show custom bootscreen once	2017-10-31 01:52:35 -05:00
GMagician	15be1cb9a9	[1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8177) ... * [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done. E axes should be allowed * Update Marlin_main.cpp * Update Marlin_main.cpp * Update Marlin_main.cpp	2017-10-30 22:50:50 -05:00
Scott Lahteine	893092ff7f	Kinematic clamp_to_software_endstops	2017-10-30 16:24:45 -05:00
Scott Lahteine	8b7c1e9cec	Fix for MAX_VFAT_ENTRIES sanity check	2017-10-30 16:24:45 -05:00
Scott Lahteine	393ceb28fc	The plural of 'axis' is 'axes'	2017-10-30 14:49:51 -05:00
Scott Lahteine	d9cb7be444	Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint ... [1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 23:57:44 -05:00
Scott Lahteine	5837f067cf	Tweak to QUICK_HOME comment	2017-10-29 23:50:02 -05:00
Scott Lahteine	5e5a177934	No hacks needed for SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 22:44:03 -05:00
Scott Lahteine	0b5b03d9dc	Tweak for soft endstops	2017-10-29 20:16:22 -05:00
Scott Lahteine	9288d80613	Merge pull request #8156 from thinkyhead/bf1_anet_10_servo ... [1.1.x] Define a default SERVO0_PIN for Anet 1.0	2017-10-29 19:53:49 -05:00
Scott Lahteine	6698db29de	Update LCD draw condition	2017-10-29 19:17:32 -05:00
Scott Lahteine	25e86a520d	Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again ... [1.1.x] Cleanup for SD Print Again	2017-10-29 19:09:34 -05:00
Scott Lahteine	b0e282a74b	Cleanups for SD_REPRINT_LAST_SELECTED_FILE	2017-10-29 19:02:17 -05:00
Scott Lahteine	46ed54cd8e	Include time scale in some planner vars	2017-10-29 18:48:14 -05:00
Scott Lahteine	9c870baf84	Add a hidden 8s watchdog option for easier debugging	2017-10-29 18:34:57 -05:00
Scott Lahteine	471c2b5d5c	Provide a default SERVO0_PIN for Anet 1.0	2017-10-29 18:34:57 -05:00
Scott Lahteine	e792c2b234	Followup to #8123 - to match 2.0.x changes	2017-10-29 05:39:44 -05:00
Scott Lahteine	daa85f71e1	Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops ... [1.1.x] Dual endstops XYZ	2017-10-29 04:36:09 -05:00
Rowan Meara	9850ba0cbd	[1.1.x] Fix M303 thermal protection #8103 (#8126) ... * Fixed M303 thermal protection The temperature sanity checking logic was not being applied during M303 (pid autotuning) because instead of setting a target temperature, it directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is enabled, PWM values rather than the target temperature determine whether the heater is on. I changed this to look directly at the PWM amount when pid is enabled. * Turn off heaters on M303 error Currently, PID autotuning stops if it overshoots the temperature by 20C or if if the temperature does not change for 20 minutes and it times out. I added calls to disable the heaters in these scenarios. * Removed unnecessary if statement. Added changes suggested by GMagician. * Update temperature.cpp * Update temperature.cpp * Update temperature.cpp	2017-10-29 04:34:47 -05:00
Scott Lahteine	318c419f77	Implement support for Dual X and Y endstops	2017-10-29 03:49:45 -05:00
Scott Lahteine	7e1232269a	Add Dual Steppers / Endstops to configs	2017-10-29 03:49:45 -05:00
Scott Lahteine	62d52d62dc	Cleanup for DIGIPOTS settings	2017-10-29 03:49:32 -05:00
LVD-AC	77cf42588f	(1.1.x) serious bug G33	2017-10-29 00:22:55 +02:00
Scott Lahteine	a979c428ee	Revert default BABYSTEP_MULTIPLICATOR to 1	2017-10-27 19:42:51 -05:00
jmdearras	6920769a9a	Added MKS GEN L board (#8088) ... [1.1.x] Add MKS GEN L board	2017-10-27 02:13:41 -05:00
Scott Lahteine	410aa0716d	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-27 00:10:04 -05:00
Scott Lahteine	445a7f65cd	Clean up trailing whitespace	2017-10-27 00:02:35 -05:00
Luc Van Daele	e64cfb13b8	(1.1.x) auto tune calibration parameters (#8031) ... * auto tune calibration parameters * solve warnings * Tweaks to formatting * review Thinkyhead * Error	2017-10-26 23:49:20 -05:00
Scott Lahteine	2296d98845	Tweak neopixel self-test	2017-10-26 22:46:11 -05:00
Scott Lahteine	9aac3d8773	Add some Polish translations ... Thanks @SCiunczyk	2017-10-26 22:44:23 -05:00
Scott Lahteine	6569b9ba56	Fix FWRETRACT logic, apply common sense	2017-10-26 22:36:41 -05:00
Bob-the-Kuhn	7ab9abe4ef	Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix ... (bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages	2017-10-26 16:09:52 -05:00
Bob-the-Kuhn	3357170b18	give this language an unique name	2017-10-26 15:48:00 -05:00
Roxy-3D	2e746f2b8b	Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) ... * Initial conflict resolution All previous items resolved: - Use of ELAPSED() on timer code - Switch to use of defer_return_to_status=true as much as possible - Update & Clean Up of Max7219 routines * Resolve non-SD case in ultralcd.cpp	2017-10-26 11:44:55 -05:00
Bob-the-Kuhn	594c075377	1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095) ... * use reduced sized font for some languages * Fit Portuguese language files to existing scheme * Rename language_pl-DOGM.h to language_pl_utf8.h * Rename language_pl_utf8.h to language_pl-DOGM.h * Update dogm_font_data_ISO10646_1.h * Update dogm_font_data_ISO10646_1.h	2017-10-25 18:32:38 -05:00
Scott Lahteine	8bb1e91afd	More specific M100 description	2017-10-25 16:11:09 -05:00
Scott Lahteine	a12d1b21b5	Merge pull request #8048 from madmo/mks-mini-gt2560 ... [1.1.x] Add MKS MINI 12864 support to GT2560	2017-10-25 01:13:07 -05:00
Scott Lahteine	5bed2f351a	Fix spacing, use single instances of similar pins	2017-10-24 19:12:40 -05:00
Scott Lahteine	ec9d7b639d	Encourage users to re-examine their configs	2017-10-24 18:33:31 -05:00
Scott Lahteine	1c97c1582c	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:25:50 -05:00
Scott Lahteine	f06f4b40b8	Apply physical limits to mesh bounds	2017-10-24 16:49:00 -05:00
Scott Lahteine	3235beef6d	Merge pull request #8073 from thinkyhead/bf1_fix_M600 ... [1.1.x] Fix position sync in M600 pause/resume	2017-10-24 14:56:01 -05:00
Scott Lahteine	e5ab783b08	Merge pull request #8061 from thinkyhead/bf1_general_cleanup ... [1.1.x] Patch up some verbiage in configs	2017-10-24 14:44:31 -05:00
Scott Lahteine	355ebec92d	Fix position sync in M600 pause/resume	2017-10-24 14:41:54 -05:00
montri2025	fa157f08ff	lcd <20 disply Bed Temperature cast ty (#8068)	2017-10-23 23:46:26 -05:00
Scott Lahteine	39a545b3f8	Patch up some verbiage in configs	2017-10-22 17:14:50 -05:00
Roxy-3D	e9bc9a2ab4	change to better (more clear) names (#8049) ... set_destination_to_current() changed to set_destination_from_current() set_current_to_destination() changed to set_current_from_destination()	2017-10-21 10:58:17 -05:00
Moritz Bitsch	b22c87183f	Add MKS MINI 12864 support for GT2560	2017-10-21 13:05:21 +02:00
tweichselbaumer	fa44130734	Add M290 babystepping (#8014) ... * Add M290 babystepping * Allow `Z` for `M290` * fix spacing * Support BABYSTEP_XY in M290 * Not just Z * Extend M290 for BABYSTEP_ZPROBE_OFFSET * tweak	2017-10-21 03:58:53 -05:00
MetalSearch	9b3f27f02a	Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) ... [1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1	2017-10-21 00:24:22 -05:00
Scott Lahteine	a7398a0459	Prevent SDCARD_SORT_ALPHA from exploding	2017-10-20 19:14:11 -05:00
Scott Lahteine	91c5c2538a	Add SCROLL_LONG_FILENAMES advanced option ... Based on #7637 by @marcio-ao	2017-10-20 19:14:10 -05:00
Scott Lahteine	259cf1b0b2	BQ enables this in the config. Remove here	2017-10-18 23:23:56 -05:00
Scott Lahteine	2338632270	Simplify Cartesian probing bounds ... Followup to #8011	2017-10-18 17:16:14 -05:00
Luc Van Daele	2a88a3fd33	boolval revised (#8017)	2017-10-18 14:19:01 -05:00
Thomas Moore	84470f6b2a	Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011)	2017-10-18 10:03:00 -05:00
studiodyne	e04902f589	Add EXTRA_FAN_SPEED feature	2017-10-16 02:32:30 -05:00
Scott Lahteine	d63d08ef8b	Merge pull request #7948 from gallynero/patch-1 ... Enable change feedrate in delta	2017-10-15 16:28:45 -05:00
Scott Lahteine	5c2ff6ed19	Add Capability BUILD_PERCENT	2017-10-15 03:01:36 -05:00
Scott Lahteine	5f708d47ce	Add LCD_SET_PROGRESS_MANUALLY	2017-10-15 02:21:09 -05:00
Scott Lahteine	3b4b9c6d68	Unaccented French for Character Display	2017-10-14 20:17:29 -05:00
MetalSearch	8df47d76c7	Add control board MAKEBOARD Mini ... +Add French language without accent for japanese LCD	2017-10-14 20:10:03 -05:00
Scott Lahteine	be55a49946	Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops ... [1.1.x] Software endstop options by axis	2017-10-14 17:37:35 -05:00
Scott Lahteine	e05af35678	Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs	2017-10-14 17:14:19 -05:00
Scott Lahteine	060d16d26b	Split the software endstop capability by axis. ... Based on #7975 and #7979	2017-10-14 17:14:08 -05:00
Scott Lahteine	e17869ca20	Fix Emergency Parser ... Followup to #7459	2017-10-14 15:58:07 -05:00
Scott Lahteine	662105c1b6	ADC sensor fix inspired by 'Evgen2' on Twitter	2017-10-14 02:39:13 -05:00
Scott Lahteine	b8ddae61e2	ubl_state no longer needed	2017-10-14 02:39:13 -05:00
Scott Lahteine	ece14af556	Improve LCD leveling value edits	2017-10-14 02:39:13 -05:00
Scott Lahteine	b07a2aa23c	Add HAS_MESH conditional	2017-10-14 02:39:12 -05:00
Scott Lahteine	88857e8028	Move fade_scaling_factor_for_z to Planner	2017-10-14 02:10:46 -05:00
Scott Lahteine	8e808fcadc	General cleanup, apply const	2017-10-13 16:13:36 -05:00
Scott Lahteine	da93a272a0	Move leveling_is_active to a macro	2017-10-13 16:11:27 -05:00
Scott Lahteine	3d5b10735f	Remove obsolete UBL z_offset	2017-10-13 08:23:01 -05:00
gallynero	94228d4522	Enable change feedrate in delta ... Enable change the relative feedrate on a printing job in delta machines with UBL	2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk	167058b61f	Different NEOPIXEL types ... Changes to support NEOPIXEL LED strips - Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h - ability to setup startup brightness - ability to define sequential/non-sequential transition of color change during heating-up - additional parameter to M150 P<brightness>	2017-10-10 01:58:40 -05:00
Scott Lahteine	f835245ee1	Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance ... [1.1.x] Remove legacy ADVANCE feature	2017-10-10 00:31:39 -05:00
Scott Lahteine	38110e220d	Segmented manual moves for kinematics	2017-10-09 23:10:17 -05:00
deram	9239fcf0da	Allow UBL G29 and G26 to build without a probe	2017-10-09 18:37:53 -05:00
Scott Lahteine	381ebc043f	Add support for ST7565-64128N ... Based on #7447 by @Bob-the-Kuhn	2017-10-09 17:39:03 -05:00
jmdearras	c7e0a49c94	Add some new LCD displays ... - Original CR-10 - MKS Mini Display	2017-10-09 17:39:03 -05:00
Scott Lahteine	067622fcc6	Apply some tweaks based on 2.0.x	2017-10-09 17:39:03 -05:00
Scott Lahteine	ae256576e1	Bring configs into parity with 2.0.x	2017-10-09 17:38:39 -05:00
Scott Lahteine	cbfcce09fa	Remove legacy ADVANCE feature	2017-10-09 04:27:45 -05:00
Scott Lahteine	a21201a713	LCD filename already concatentated	2017-10-07 15:14:58 -05:00
Scott Lahteine	53f2f188f2	LCD filename already concatenated	2017-10-07 15:11:28 -05:00
Scott Lahteine	a6e95c7d25	Fix display issue with SD_ALPHA_SORT caching	2017-10-07 15:07:05 -05:00
Dave Johnson	97e6663bb3	[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878) ... * Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM. add HD44780 too * Reduce lines used * Reduce lines used	2017-10-07 15:00:56 -05:00
Scott Lahteine	e2ceb1b800	Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix ... Addressing #7612	2017-10-07 02:25:35 -05:00
Scott Lahteine	8c93295d62	Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses ... [1.1.x] Fixing ANET encoder pulses	2017-10-07 01:21:14 -05:00
Phr3d13	c26242a553	Fixing #7833	2017-10-07 00:07:24 -05:00
Scott Lahteine	dac5f20a01	Patch SD file draw bug	2017-10-06 23:53:08 -05:00
Scott Lahteine	b211fa4e1f	Remove extra NEWPANEL settings in Conditionals_LCD.h	2017-10-06 17:23:32 -05:00
LVD-AC	355cba4aa7	Fixes for G33	2017-10-06 15:52:53 -05:00
Scott Lahteine	e287e14354	Tweak spacing in utf8_mapper.h	2017-10-06 15:11:27 -05:00
Scott Lahteine	5e63ba970d	Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk ... [1.1.x] Added Slovak C2C3C4 mapper implementation.	2017-10-06 14:56:26 -05:00
Roman Moravčík	2a46ab288e	Added Slovak C2C3C4 mapper implementation.	2017-10-06 14:40:15 -05:00
Scott Lahteine	7999249a5c	Set TEMP_SENSOR_0 to 1 in CR-10 example config ... As pointed out in #7692 by @totalitarian	2017-10-06 14:29:00 -05:00
Scott Lahteine	0ec9a7f090	Fix xon_xoff_state initialization	2017-10-04 12:10:15 -05:00
Scott Lahteine	a47c5c093d	Merge pull request #7459 from ejtagle/xon-xoff-sdxfer ... [1.1.x] XON/XOFF serial handshake (for faster transfers to SD)	2017-10-02 23:52:41 -05:00
Scott Lahteine	bcb8722513	Fix DUAL_X_CARRIAGE manual move ... Addressing #7745	2017-10-02 23:28:52 -05:00
Scott Lahteine	4c34b3ad9c	Stop redundant E4_IS_TMC2130 current control	2017-10-02 23:10:34 -05:00
Scott Lahteine	1b8b5c4b06	Make prepare_move_to_destination_dualx a full move function	2017-10-02 23:10:18 -05:00
Scott Lahteine	4e19ff75b6	XON/XOFF corrections, tweaks, formatting, etc.	2017-10-02 03:52:42 -05:00
Scott Lahteine	94caabf89a	Add XON/XOFF options to example configs	2017-10-02 03:52:41 -05:00
Scott Lahteine	f365448338	Merge pull request #7811 from thinkyhead/bf1_fix_resume_print ... [1.1.x] Fix broken M600 resume_print	2017-10-01 22:54:34 -05:00
GMagician	8ab426c3a4	Updated all examples configurations ... Forgot to update examples configurations. Done now	2017-10-01 21:04:12 -05:00
GMagician	33d28c24bf	Implementing [FR] #7548 ... Added new configuration to inhibit XYZ movements when home is not done	2017-10-01 21:02:42 -05:00
Scott Lahteine	ac70048945	Only MarlinConfig.h ahead of feature block	2017-10-01 20:55:14 -05:00
MasterPIC	40a4a716e1	Fix filament change bug in resume_print ... Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion. Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position. So the extrusion step is mixed with the movement required to go back to the printing position. The provided code seems to be working but probably a better fix is required.	2017-10-01 18:42:29 -05:00
Scott Lahteine	802f147686	Remove some excess whitepsace	2017-10-01 18:25:04 -05:00
Scott Lahteine	80a0f935a1	Fix G10-G11 by adding a synchronize ... Based on #7792 by @tcm0116	2017-09-30 17:46:31 -05:00
MasterPIC	7f8ff0a724	Show leveling status on character LCD	2017-09-27 12:18:41 -05:00
Scott Lahteine	723a34d9c7	Add confirmation to Init EEPROM command	2017-09-27 11:27:47 -05:00
Scott Lahteine	2efd5b119d	Add USER_SCRIPT_RETURN option	2017-09-27 11:23:34 -05:00
Scott Lahteine	b105e47cb5	Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled ... Based on #7769	2017-09-27 10:39:44 -05:00
DecoyPlatypus	41dcbe89dd	Fixed ST7920_DELAY typo ... Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3	2017-09-27 03:01:09 -05:00
DecoyPlatypus	70a64355f6	Fixed LCD_FOR_MELZI SanityCheck ... Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.	2017-09-27 03:01:09 -05:00
Scott Lahteine	e37a1ded0d	Increase BABYSTEP_MULTIPLICATOR to 100 ... Ideally, it should be calculated based on Z steps per unit so that each babystep corresponds to around 0.025mm. Smaller than this is largely insignificant for typical layer heights.	2017-09-27 00:14:26 -05:00
Scott Lahteine	3e28243076	No need for LCD_PINS_Dn when unused	2017-09-27 00:12:20 -05:00
Scott Lahteine	bbb94b8f68	babystepping tweak	2017-09-27 00:12:20 -05:00
Scott Lahteine	a277b43e30	Fix babystep menu display	2017-09-27 00:12:20 -05:00
Scott Lahteine	8a994fb1b1	Fix encoder pulses for G3D_PANEL	2017-09-27 00:12:20 -05:00
Scott Lahteine	ac2ac99e15	Fix bad logic in autostart ... As pointed out by @marcio-ao in #7638	2017-09-24 17:52:35 -05:00
Scott Lahteine	c1cc79176c	Full-featured Creality configs	2017-09-24 16:52:42 -05:00
Scott Lahteine	f25dccd6d1	Disable BABYSTEP_XY by default in all configs	2017-09-24 16:52:42 -05:00
Scott Lahteine	cd09a83cfa	Add size note to SDSORT_LIMIT	2017-09-24 16:52:41 -05:00
Scott Lahteine	9bbc2df217	General code cleanup, spacing	2017-09-24 16:52:41 -05:00
Luc Van Daele	74d430cb97	matrix names update (#7697) ... * matrix names update * symplified names * new angle normalization * ABC * axis * least squares * recalc_delta_settings * endstop_adj * 0p * bug	2017-09-24 01:45:31 -05:00
Scott Lahteine	9d4d53e2fd	Update links to old wiki page	2017-09-23 22:06:45 -05:00
Scott Lahteine	00896f1713	Fix LEVEL_BED_CORNERS (No leveling required)	2017-09-23 22:00:45 -05:00
Scott Lahteine	c3a9e95a5f	Define drawmenu items once, in ultralcd.cpp	2017-09-23 22:00:45 -05:00
Scott Lahteine	0afd25a010	Fix caselight compile issues	2017-09-23 22:00:44 -05:00
GMagician	5b87843fae	Addressing #7612 ... Replaced extruder with hotend	2017-09-07 19:07:36 +02:00
Scott Lahteine	386b74f8c2	Merge pull request #7593 from marcio-ao/bugfix-1.1.x ... Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)	2017-09-02 00:01:38 -05:00
Tannoo	2a963fb5d1	UBL LCD Bugfixes (#7598)	2017-09-01 16:59:06 -05:00
Marcio Teixeira	d69c5317df	Added option for graphical overlay for Z-offset	2017-08-31 14:21:39 -06:00
Scott Lahteine	367e1b54ba	Merge pull request #7591 from thinkyhead/bf1_misc_patches ... M111: no args reports current flags	2017-08-31 15:19:29 -05:00
Scott Lahteine	8a184a526a	Marlin: Patch G33, allow M111 to give status	2017-08-31 14:35:00 -05:00
Scott Lahteine	353c23b16e	Enforce BED_CENTER_AT_0_0 on Delta, SCARA	2017-08-31 14:34:59 -05:00
Scott Lahteine	898f48e331	CNC workspace planes for G5 ... According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.	2017-08-31 14:29:29 -05:00
Scott Lahteine	5851c2d36f	MAX7219 followup (#7564) ... * Add MAX7219_DEBUG to Travis CI testing * Tweak config and use standard pin naming for MAX7219_DEBUG * MAX7219: Apply coding standards, use macros, etc. * Make code work...	2017-08-31 11:44:43 -05:00
Scott Lahteine	52073f21c5	Merge pull request #7556 from thinkyhead/bf1_slovak_language ... Slovak UTF-8 translation	2017-08-27 21:05:53 -05:00
Scott Lahteine	321f98f867	Fix servo delay in Folgertech config	2017-08-27 20:53:27 -05:00
jneilliii	36771e9492	Fixes required for Creality CR-10	2017-08-27 20:39:16 -05:00
Roxy-3D	3f0b38ed5d	Add Max7219 LED Matrix Debug Support (#7563) ... * Add Max7219 LED Matrix Debug Support The Max7219 8x8 LED Matrix's are very helpful for debugging new code. And for that matter, just trying to maximize printer settings without causing stuttering. The displays are very inexpensive (under $2.00 with shipping) and provide a lot of help when trying to debug complicated code. * Try to keep Makefile up to date.	2017-08-25 17:03:07 -05:00
GMagician	0067bb2840	Addressing #7552 ... When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged. This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.	2017-08-25 03:23:16 -05:00
Scott Lahteine	2b12093589	Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben ... New feature: Part-Cooling Fan Multiplexer	2017-08-25 03:16:40 -05:00
Michal Holes	54d48130f3	Slovak UTF-8 translation ... Slovak UTF-8 translation	2017-08-23 19:14:35 -05:00
Scott Lahteine	86c024ce98	Organize, document pins.h include lines	2017-08-23 18:33:00 -05:00
Scott Lahteine	c7b07d20f2	Minor patches to pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	356af7dcb0	Tweak Sanguinololu-related pins files	2017-08-23 18:32:59 -05:00
Scott Lahteine	11a724d8fc	Sanguinololu example configuration	2017-08-23 18:32:59 -05:00
Scott Lahteine	e337df2e98	Miscellaneous tweaks to serial outputs, code cleanups	2017-08-23 18:32:58 -05:00
Vben	c0409b85e7	New feature: Part-Cooling Fan Multiplexer	2017-08-18 15:59:04 -05:00
Scott Lahteine	e82e9073d6	Merge pull request #7530 from GMagician/Code-reduction ... Code reduction with some configurations	2017-08-18 13:57:59 -05:00
GMagician	6127154af3	Fix identation by tab ... There was a tab instead of spaces	2017-08-18 11:34:55 +02:00
GMagician	b94a1c6b9f	Code reduction this some configurations ... When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call	2017-08-18 11:11:00 +02:00
GMagician	405a2132f3	#7529 compile fix ... I made an error in previous fix	2017-08-17 22:04:28 +02:00
GMagician	869d7f3703	#7504 missing part ... #7504 integration has missed this part. When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it. In my original fix I completely removed this part but maybe this is a better compromise	2017-08-17 21:43:47 +02:00
Scott Lahteine	101ba70517	Merge pull request #7505 from thinkyhead/bf1_anet_1_pio ... Add Anet 1.0 to Platformio.ini	2017-08-17 00:33:20 -05:00
Vben	4817b39d98	Added new feature for AutoParking Extruder (APE)	2017-08-16 17:33:11 -05:00
Scott Lahteine	6772e33ef6	Use [XY]_CENTER for error correction ... Followup to #7512	2017-08-16 16:13:09 -05:00
Scott Lahteine	385f1bb9e5	Merge pull request #7504 from thinkyhead/bf1_servo_delays ... Individual servo delays	2017-08-16 16:05:22 -05:00
Scott Lahteine	2a31c9f2ce	Merge pull request #7515 from cdedwards/bugfix-1.1.x ... Fix for G26 spam output	2017-08-16 16:01:10 -05:00
MTrab	5fa61c0ad3	Add Anet 1.0 to Platformio.ini ... Added env:anet10 to platformio.ini for easy compile and upload to this board	2017-08-16 15:59:20 -05:00
Scott Lahteine	b3f59ec945	Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 ... Add "Level Corners" menu item	2017-08-16 15:58:15 -05:00
Tannoo	b33739d493	UBL_Language_Update (#7520) ... * UBL_Language_Update Translatable strings * Use slightly better wording... * Use slightly better wording...	2017-08-16 09:49:04 -05:00
Scott Lahteine	a1878cd1c0	Add "Level Corners" menu option	2017-08-16 02:54:33 -05:00
Scott Lahteine	0a18fb735e	Use "PSU" label to fit on screen	2017-08-16 02:51:00 -05:00
Scott Lahteine	30887feae3	Tweak some formatting in ABL G29	2017-08-16 02:51:00 -05:00
Thomas Moore	257b693ab0	Advanced pause fixes (#7518) ... * Disallow filament change while paused * Use kinematic movemements in pause_print and resume_print	2017-08-15 22:57:13 -05:00
Tannoo	ab2ac1af71	UBL_LCD_storage_corrections (#7517) ... Correcting the storage selection. Also EEPROM error handling on the LCD.	2017-08-15 21:01:11 -05:00
cdedwards	f1843211e6	Fix for G26 spam output ... while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.	2017-08-15 17:04:53 -06:00
Roxy-3D	be5ca34215	Allow G29 to work correctly even if nozzle is off the mesh. (#7512) ... * work around previous regressions...	2017-08-15 17:04:52 -05:00
Scott Lahteine	06541ec885	Merge pull request #7448 from thinkyhead/bf1_delta_fixes ... Prevent damage if DELTA_HEIGHT is set badly	2017-08-15 16:35:09 -05:00
GMagician	e9c72978c7	Implement SERVO_DELAY as array ... This modify give SERVO_DELAY x servo basis	2017-08-15 00:28:47 -05:00
Scott Lahteine	96ae53cf41	Use MOVE_SERVO macro where possible	2017-08-15 00:28:39 -05:00
Scott Lahteine	3be9c19f12	Hold on move axis screens	2017-08-14 22:51:47 -05:00
Scott Lahteine	8fd58cd6dc	Patch goto labels for consistency	2017-08-14 22:51:47 -05:00
Scott Lahteine	75e6f72c89	Fix hexadecimal number formatting	2017-08-14 22:50:44 -05:00
Scott Lahteine	ac76101ec3	Eliminate goto in gcode_M48	2017-08-11 17:00:40 -05:00
Scott Lahteine	75e6ead5fd	Eliminate goto in gcode_G33	2017-08-11 17:00:40 -05:00
Scott Lahteine	6bd63d27b5	Updates to G29 for probe error handling	2017-08-11 17:00:40 -05:00
Thomas Moore	f54e0fc90f	Prevent damage if DELTA_HEIGHT is incorrect	2017-08-11 16:09:14 -05:00
Scott Lahteine	0938c62b48	Neater position_is_reachable call	2017-08-11 15:55:32 -05:00
Scott Lahteine	9d95b1b4df	Tweak Conditionals_post.h	2017-08-11 15:55:32 -05:00
Scott Lahteine	35d5a7bdff	Tweak CR-10 config/pins	2017-08-11 15:55:31 -05:00
Scott Lahteine	419c8969a7	Merge pull request #7479 from thinkyhead/bf1_fix_italian ... Fix Italian string length	2017-08-10 18:42:35 -05:00
Frederik Kemner	25a11cd485	Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)	2017-08-10 16:53:04 -05:00
Scott Lahteine	7f3406d47b	Fix Italian string length ... Addressing #7264	2017-08-10 15:41:35 -05:00
etagle	2864ef8c7f	Slight improvement to the line parsing logic, saving 8 cycles per character	2017-08-08 02:57:55 -03:00
etagle	534bbb81ff	Adding XON/XOFF and STATISTICS implementation	2017-08-08 02:46:37 -03:00
etagle	3e5485de92	Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed	2017-08-08 02:30:04 -03:00
etagle	9e147e9ac4	Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port	2017-08-08 02:22:33 -03:00
etagle	8ab2e420f6	Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage	2017-08-08 02:18:42 -03:00
etagle	b4c53af07d	Adding a new macro to be able to determine if a given integer value is a power of 2	2017-08-08 02:09:50 -03:00
Jozsef Kiraly	97c21e9007	Support for Geeetech GT2560 Rev.A/Rev.A+	2017-08-06 00:42:54 -05:00
Scott Lahteine	b2822a59f9	Add a sanity check for valid bed size	2017-08-05 03:49:04 -05:00
Scott Lahteine	a7e5c1bf19	Use float to init TMC2133 steps-per-mm	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd66d21749	Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check ... As proposed in #7429	2017-08-05 03:48:52 -05:00
richarddeweerd	b370906031	Example config for Geeetech I3 Pro X with GT2560 controller	2017-08-05 03:48:52 -05:00
Scott Lahteine	804818b4d9	Bring configs up to date	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd841a3675	Merge pull request #7410 from benlye/user-script-feedback ... Make audible user script feedback optional	2017-08-05 02:59:56 -05:00
Florian Heilmann	0fd2923a9f	Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) ... * Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT * Fix Identation * Make use of IS_SD_PRINTING macro as per @MagoKimbra	2017-08-05 02:58:38 -05:00
benlye	24af9e1bf4	Make audible user script feedback optional ... Add a parameter to enable/disable audible user script feedback	2017-08-04 17:24:10 +01:00
Florian Heilmann	6827a162bb	Update language_de.h ... Add MSG_BLTOUCH MSG_DELTA_SETTINGS MSG_UBL_MESH_EDIT MSG_UBL_OUTPUT_MAP_BACKUP MSG_UBL_STEP_BY_STEP_MENU MSG_Z_FADE_HEIGHT	2017-08-04 09:35:21 +02:00
Scott Lahteine	3497153cf1	Followup cleanup patch ... Fix regression in #7428	2017-08-03 14:55:22 -05:00
Scott Lahteine	16f8c4865a	Merge pull request #7409 from FHeilmann/bf_update_ru_translation ... Update Russian Translation	2017-08-03 14:54:40 -05:00
Scott Lahteine	622048ffb0	Clean up whitespace, trailing space, bad tab conversion, etc.	2017-08-03 11:20:03 -05:00
Roxy-3D	2cbdc0ebb6	Fix large Z corrections when nozzle moves off of UBL mesh (#7415)	2017-08-02 16:51:04 -05:00
Florian Heilmann	650e5274c4	Update Russian Translation	2017-08-02 21:19:15 +02:00
Scott Lahteine	ce65c13a97	Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements ... Clarify LCD_BED_LEVELING requirements	2017-08-01 17:46:07 -05:00
Dave Johnson	936dfb965c	Clarify LCD_BED_LEVELING requirements ... LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396	2017-08-01 14:13:54 -07:00
Kai	ffe3013bb5	Fix for #7395 ... Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395	2017-08-01 21:45:41 +02:00
Øystein Krog	e948f77cf9	Fix DUAL_X_CARRIAGE not moving at all ... Axis would only move when homing. Bug introduced in 91841d75c9. Fixes #6956, fixes #7050 and fixes #7291	2017-07-31 18:44:26 +02:00
Scott Lahteine	08b0456d91	Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor ... Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-30 05:41:12 -05:00
teemuatlut	936d00dda8	Implement probing delay for piezo sensors	2017-07-29 21:46:40 -05:00
Scott Lahteine	29eef360d0	Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv ... Fixes for FWRETRACT	2017-07-29 21:20:19 -05:00
Wilfried Chauveau	894608f8a3	Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-29 21:15:37 -05:00
Scott Lahteine	ff06e1a030	Merge pull request #7372 from tcm0116/delta_calib_menu ... Move Delta Calibration menu to the Prepare menu	2017-07-29 21:05:03 -05:00
Thomas Moore	15e009b6ca	Move Delta Calibration menu to the Prepare menu	2017-07-28 08:33:18 -05:00
Scott Lahteine	bfd396c13a	Patch to fix some compiler warnings	2017-07-28 02:27:16 -05:00
Scott Lahteine	48c5f3dddf	Tweak kill action #ifdef	2017-07-27 23:42:01 -05:00
Scott Lahteine	be7a9a07c5	Don't reset grid with G29 Q + PROBE_MANUALLY	2017-07-27 22:47:43 -05:00
Scott Lahteine	dfe670247d	Merge pull request #7363 from marcio-ao/bugfix-1.1.x ... Makefile fixes and U8G support.	2017-07-27 21:31:56 -05:00
Marcio Teixeira	af83c512b8	Added support for U8G.	2017-07-27 07:49:25 -06:00
Scott Lahteine	4eff18854b	Rename options with swap_ prefix	2017-07-27 04:14:29 -05:00
Scott Lahteine	14482d2f2a	Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo	2017-07-27 04:14:29 -05:00
Scott Lahteine	9fc72422e4	Don't let the flow multiplier affect retract/recover length	2017-07-27 04:14:29 -05:00
Scott Lahteine	fee696db5d	Improve retract() for G10/G11/autoretract	2017-07-27 04:14:29 -05:00
Scott Lahteine	423b0f3a1e	Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT	2017-07-27 04:14:29 -05:00
Scott Lahteine	51864fd365	Add bed size as a configuration option	2017-07-26 23:04:54 -05:00
Scott Lahteine	dc7c95e07b	Remove @ section fwretract	2017-07-26 22:46:16 -05:00
Dave Johnson	4718c09c48	Remove extraneous USBCON defines for AT90USB boards ... USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting. more USBCON unification	2017-07-23 16:41:48 -07:00
C. Scott Ananian	890e7a16a9	Add support for Printrbot Neopixel RGBW strip. ... Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/	2017-07-22 16:07:55 -05:00
Scott Lahteine	a059e95463	Bring Infitary i3 config up to date	2017-07-21 20:49:19 -05:00
Scott Lahteine	d6d6043548	Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin ... MKS 1.3+: Add pin mapping for PS_ON	2017-07-21 20:00:26 -05:00
Alexey Shvetsov	851f9f5399	Update Russian translation - Part 1 ... Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 19:32:37 -05:00
Scott Lahteine	b7a16e4468	Merge pull request #7315 from fixoid/patch-1 ... Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1	2017-07-21 19:10:54 -05:00
Alexey Shvetsov	f38b8c5bf8	MKS 1.3+: Add pin mapping for PS_ON ... This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4). Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 18:50:05 -05:00
Scott Lahteine	8a3bc6be4d	Improve FWRETRACT config options and commentary ... Add more details as requested in #7198	2017-07-20 22:57:50 -05:00
Scott Lahteine	b0173ccdb9	Drop extra initializers for vars initialized by EEPROM code	2017-07-20 22:57:49 -05:00
Scott Lahteine	7afafb05b8	Split G10/G11 into separate functions	2017-07-20 02:24:13 -05:00
Scott Lahteine	c45798694f	Add some more requirements to the G-code list	2017-07-20 02:24:13 -05:00
Scott Lahteine	72de280c1e	BARICUDA valve pressure consistently uint8_t	2017-07-20 02:21:40 -05:00
Scott Lahteine	4d98e3f0a7	General cleanup	2017-07-20 02:21:40 -05:00
fixoid	e530c67349	Fixing SWITCHING_EXTRUDER feature	2017-07-19 21:15:26 +03:00
Tannoo	2ad3ca5d8a	Bugfix (#7310)	2017-07-18 22:55:14 -05:00
Roxy-3D	37a6833d7e	Allow the sampled point to be added into the Least Squares Best Fit (#7289) ... Without this... The LSF won't work because none of the sampled points in this code block get added.	2017-07-13 16:33:02 -05:00
C. Scott Ananian	a519b093b9	Fix build by replacing qr_solve by least_squares_fit. (#7285) ... This was broken by 9af67e2446.	2017-07-13 12:02:15 -05:00
Scott Lahteine	0873c667fa	Apply coding standards to recent merges	2017-07-13 00:46:16 -05:00
Scott Lahteine	8c2907d10f	Fix ABL broken by recent change	2017-07-12 22:56:18 -05:00
Roxy-3D	9af67e2446	Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) ... We can save more and a pile of RAM by eleminating the eqnBVector and EqnAMatrix arrays next.	2017-07-10 19:05:11 -05:00
Scott Lahteine	76e90b93b7	Volatile keyword not needed for parser.seen	2017-07-10 15:38:54 -05:00
Jamie Bainbridge	00e4ced58e	Stay in User Menu after command. Add feedback. ... When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu. This PR modifies Marlin to stay in the User Menu after a command.	2017-07-10 13:47:12 -05:00
Scott Lahteine	1066b17457	Merge pull request #7260 from thinkyhead/bf_G33_update_27 ... Updates to G33 and its LCD code	2017-07-10 13:39:36 -05:00
Tannoo	e927941c06	Bugfix (#7265) ... Fix compile error when UBL is enabled but there is no LCD Panel.	2017-07-08 09:44:50 -05:00
Scott Lahteine	68aea9c01d	Merge pull request #7261 from thinkyhead/bf_configs_by_vendor ... Arrange more example configs by vendor	2017-07-07 15:46:22 -05:00
Tannoo	aaacef9441	Corrections (#7231) ... 20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.	2017-07-07 11:05:08 -05:00
LVD-AC	4bc79ec877	Updates for G33-LCD interface	2017-07-07 05:00:59 -05:00
Scott Lahteine	186580b55f	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00
Scott Lahteine	6be369f3ea	Add some config names to AUTHOR	2017-07-07 04:46:33 -05:00
Scott Lahteine	7fc31a7940	Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio ... Add support for BQ heated bed kit with Hephestos 2	2017-07-07 04:11:07 -05:00
Scott Lahteine	11e376e920	Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 ... Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-07 03:22:47 -05:00
João Brázio	2065591daf	Add support for BQ heated bed kit with Hephestos 2	2017-07-07 03:10:38 -05:00
essgcee	61be28133d	Support for Creality CR-10 ... Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)	2017-07-06 23:08:10 -05:00
Scott Lahteine	9248a90a4c	Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-06 22:47:51 -05:00
Scott Lahteine	5ef1e5ef60	Tweaks for M43	2017-07-06 21:47:50 -05:00
Scott Lahteine	c7732db99d	Fix: Use of digitalRead, digitalWrite breaks on AT90USB	2017-07-06 21:25:56 -05:00
Scott Lahteine	f713f25fa5	Clean up excess whitespace	2017-07-06 21:24:30 -05:00
Scott Lahteine	fc9ce65095	Add BUSY_WHILE_HEATING for hosts that need it	2017-07-06 16:28:57 -05:00
Scott Lahteine	c6d430670a	Clear SHOW_BOOTSCREEN with no LCD	2017-07-06 14:21:27 -05:00
Scott Lahteine	11c589c3ec	Fix compile issue with G38 ... Fixes #7250	2017-07-06 14:21:27 -05:00
Scott Lahteine	678914be25	Patch M23 to work around Simplify3D bug ... Addressing #7227	2017-07-06 14:00:58 -05:00
LVD-AC	3efe4aeef8	Add PROBE_MANUALLY support to G33	2017-07-04 18:06:54 -05:00
Scott Lahteine	cca1cca3a5	Merge pull request #7237 from thinkyhead/bf_cz_mapper ... UTF-8 mapper for Czech	2017-07-04 16:45:13 -05:00
Scott Lahteine	a2babb532d	Merge pull request #7217 from benlye/add-kill-action ... Add configurable action command to send when printer is killed	2017-07-04 16:44:08 -05:00
Petr Zahradník	8c34233452	UTF-8 mapper for Czech	2017-07-04 15:51:23 -05:00
Dave Johnson	20f6676d63	DISABLE_[XYZ] compatibility check ... DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING	2017-07-03 17:23:53 -07:00
Ben Lye	c28749a567	Add kill action ... Sends pre-defined string as action command when printer is kill.	2017-07-03 23:45:19 +01:00
Scott Lahteine	df87278fce	Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output	2017-07-03 15:59:06 -05:00
Scott Lahteine	4be8d7720e	Fix spelling of "Chinese"	2017-07-03 15:24:49 -05:00
LVD-AC	567941e341	Fix for issues #6997 and #7152 ... Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.	2017-07-03 02:53:49 -05:00
Scott Lahteine	57fff2e95e	Merge pull request #7219 from thinkyhead/bf_update_git_scripts ... Update Marlin+git helper scripts	2017-07-03 01:49:27 -05:00
Scott Lahteine	6a3967ee33	Corrections for probe_pt parameters	2017-07-03 01:34:27 -05:00
Scott Lahteine	534bffa7a9	Correct comment on ABL G29	2017-07-03 01:13:07 -05:00
Scott Lahteine	e1e1a0c344	Provide a default CUSTOM_BOOTSCREEN_TIMEOUT	2017-07-03 01:13:07 -05:00
Scott Lahteine	69297b2d7b	Make all EEPROM optimization options available	2017-07-02 20:47:03 -05:00
Scott Lahteine	d609489b22	Drop setup_homepin	2017-07-02 02:27:09 -05:00
Scott Lahteine	167169e1bf	Sanity check for a real probe with M48	2017-07-02 02:27:09 -05:00
Scott Lahteine	395a9f59ac	Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen ... Use lcd_bootscreen for both	2017-07-02 02:11:07 -05:00
Scott Lahteine	14663efe0d	Merge pull request #7210 from fiveangle/printrboard_revf_cleanup ... Printrboard RevF cleanup	2017-07-02 01:02:26 -05:00
Scott Lahteine	ae5923a3d0	Make lcd_bootscreen common to both	2017-07-02 00:47:36 -05:00
Scott Lahteine	859248433f	Patch for gcode debug	2017-07-02 00:47:35 -05:00
Dave Johnson	09c90c2f6c	Printrboard RevF Cleanup ... -Update Arduino IDE extension descriptions -Set default motor currents if not defined in Configuration_adv.h -Support for MINIPANEL LCD -Support for choosing internal or panel SD	2017-07-01 22:33:39 -07:00
Scott Lahteine	232a10410d	LCD_FOR_MELZI	2017-07-01 22:32:20 -05:00
Scott Lahteine	76c92a1fab	Clean up some trailing spaces	2017-07-01 22:32:20 -05:00
Scott Lahteine	cf96109056	Implement the EEPROM_CHITCHAT option	2017-07-01 21:48:18 -05:00
Scott Lahteine	dcec7178d1	Expose DISABLE_M503 option as a test option	2017-07-01 21:31:28 -05:00
Scott Lahteine	3e78a01262	Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd ... UBL radar map corrections	2017-07-01 20:59:03 -05:00
Tom	1ff7d10c80	Add configuration for Infitary M508 (i3 clone) ... Based on Infitary's own firmware settings.	2017-07-01 20:04:08 -05:00
Scott Lahteine	4cb45c10dd	Patch ubl lcd mesh map indentation	2017-07-01 19:47:52 -05:00
Scott Lahteine	abd6ba62b4	Some cleanups for ubl lcd mesh map	2017-07-01 19:47:49 -05:00
Scott Lahteine	f17bae1f70	Changes for ubl_lcd_map_control patch	2017-07-01 19:47:02 -05:00
Tannoo	8e0f3b7eba	UBL radar map corrections	2017-07-01 19:00:44 -05:00
Bob-the-Kuhn	fcceed5be6	intermittent Teensy & G26 compile problem ... =============================================== also an issue with ubl_motion.cpp	2017-07-01 14:41:24 -05:00
Scott Lahteine	30b327d24c	Finish the solution for #7166	2017-06-29 15:17:39 -05:00
Scott Lahteine	6c97c5595c	Add a sanity check for DELTA_AUTO_CALIBRATION	2017-06-29 15:03:19 -05:00
Bob-the-Kuhn	e6e3132f79	make LETTTER_OFF return values that match param indices range	2017-06-29 09:01:58 -05:00
Bob-the-Kuhn	bfbf5f8200	correct value_bool() when FASTER_GCODE_PARSER is enabled ... Also corrected compile issue when DEBUG_GCODE_PARSER and AUTO_BED_LEVELING_UBL are both enabled.	2017-06-28 19:51:08 -05:00
Scott Lahteine	406ef69702	Move Anet A8 config to subfolder	2017-06-28 16:58:57 -05:00
Scott Lahteine	379926961c	Add Anet A6 config, edit Anet A8 config	2017-06-28 16:58:57 -05:00
Scott Lahteine	5b03f23fa2	Bring configurations up to date, fix some comments	2017-06-28 16:41:49 -05:00
Scott Lahteine	e3cedfa0ec	Fix a compiler warning	2017-06-28 16:41:46 -05:00
Scott Lahteine	bb0508b6cf	Fix comment in M115 code	2017-06-28 13:08:33 -05:00
Scott Lahteine	85777a56c6	Add A (action) and E (echo) parameters to M118	2017-06-28 02:07:59 -05:00
Scott Lahteine	d1e8d4cd9d	Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update ... UBL Map Cleanup and LCD display	2017-06-28 01:20:22 -05:00
Scott Lahteine	b492e0878d	Changes to reduce and simplify	2017-06-28 01:10:30 -05:00
Ben Lye	98d362c2da	Adding M118 command to send text to serial ... Allows the user to send text to the serial console in order to communicate with a host - sending debuging information or action commands, for example. Text must begin with '//' and this is added if it is not already present at the beginning of the string.	2017-06-28 00:55:20 -05:00
Tannoo	80abc872f3	Updated to better support the coming "radar"	2017-06-27 22:51:58 -05:00
Tannoo	e90cbf5c16	UBL Map Cleanup	2017-06-27 22:51:58 -05:00
Scott Lahteine	fc140c4962	Followup for I2C_POSITION_ENCODERS	2017-06-27 20:46:40 -05:00
Scott Lahteine	f4246dc8ff	Merge pull request #7165 from thinkyhead/bf_parser_shorthand ... Use parser.seenval, add shorthand functions	2017-06-27 18:57:48 -05:00
Scott Lahteine	bd776df8c1	Optimize seen_axis by moving 'X' to index 24	2017-06-27 18:47:11 -05:00
Scott Lahteine	05449cf6ee	Add shorthand value accessors to gcode.h	2017-06-27 18:39:41 -05:00
Scott Lahteine	12f092c812	Cleanups to gcode.h, use seenval()	2017-06-27 17:57:00 -05:00
Scott Lahteine	941943c167	Apply const, spacing, etc.	2017-06-27 05:23:49 -05:00
Scott Lahteine	5b11b33854	Add support for Průša MK2 Multiplexer	2017-06-27 04:55:30 -05:00
Scott Lahteine	a4a587a897	Fix spelling of Průša	2017-06-27 04:46:46 -05:00
Scott Lahteine	ba1706a265	Fix spacing in gcode.cpp ... Followup to #6940	2017-06-27 04:46:46 -05:00
Scott Lahteine	c2c8aafda2	Merge pull request #7157 from thinkyhead/bf_g33_f_parameter ... G33 F and Height bug fix	2017-06-27 04:36:22 -05:00
Scott Lahteine	627afb29df	Merge pull request #7109 from tnw513/fix-italian ... added missing italian translation	2017-06-27 04:12:30 -05:00
Scott Lahteine	f0f9fb7465	Remove line that does nothing	2017-06-27 04:08:50 -05:00
LVD-AC	99592c8458	Update G33: Add F, fix height bug	2017-06-27 04:02:02 -05:00
Ben Lye	31514f453a	Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug ... Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries to enumerate pins 46 and 47 (which don't exist) because `#ifdef AVR_AT90USB1286_FAMILY ` doesn't work as expected.	2017-06-27 08:04:40 +01:00
Scott Lahteine	134116b874	Merge pull request #7153 from thinkyhead/bf_czech_update ... Updated Czech language	2017-06-26 17:34:15 -05:00
Petr Zahradník	e80958b631	CZ Translate BLTouch and UBL ... Fixup length	2017-06-26 16:15:31 -05:00
Scott Lahteine	fe7e890b09	Fix issues with ADC_KEYPAD ... Fixes #7150	2017-06-26 16:08:31 -05:00
dot-bob	a1632cfa0a	Added option 'H' to G29 P4. ... - Added `H` to set a nozzle height adjustment to surface of the bed. - Updated G29 P4 comments to reflect changes.	2017-06-25 17:14:08 -05:00
Scott Lahteine	e687782875	Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready ... Add Skynet/ANET A10 support	2017-06-25 14:35:22 -05:00
dot-bob	b3c36c98fd	Edit digipot currents via LCD, save to EEPROM	2017-06-25 01:02:36 -05:00
Scott Lahteine	3c7bfe798d	Various cleanups ahead of digipot save	2017-06-24 23:56:24 -05:00
Bob-the-Kuhn	9651d01e1a	Add Skynet/ANET A10 support	2017-06-24 19:07:03 -05:00
Scott Lahteine	eb314373bb	Config spacing & consistency, group custom LCDs	2017-06-24 14:33:40 -05:00
Scott Lahteine	6c45fa7dcc	Apply #elif in LCD conditionals	2017-06-24 13:56:33 -05:00
Scott Lahteine	afbc6e3e2f	Update DELTA/SCARA config comments	2017-06-24 12:47:17 -05:00
Paweł Stawicki	1e47c17b46	Fix: set digipot mcp4018 Vrefmax to 1.666V	2017-06-24 12:35:34 -05:00
Scott Lahteine	80a232419d	CNC workspace planes and 'P' argument for G2/G3	2017-06-23 14:53:03 -05:00
Scott Lahteine	5fb0d401eb	Formatting tweaks	2017-06-23 14:53:02 -05:00
Scott Lahteine	ed04d0b6be	Label DualXMode enums	2017-06-23 14:53:02 -05:00
Scott Lahteine	786cdea124	Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined	2017-06-23 14:53:01 -05:00
Scott Lahteine	ee7163fd3a	Fix pinsDebug compile errors	2017-06-23 14:53:01 -05:00
Scott Lahteine	a9f8e518bf	Fix FILAMENT_WIDTH_SENSOR infinite loop issue ... Addressing #6992 and #5851	2017-06-23 14:53:01 -05:00
Scott Lahteine	254a11b083	Merge pull request #7120 from thinkyhead/bf_sainsmart_link ... Add link to F. Malpartida LiquidCrystal library	2017-06-22 14:04:23 -05:00
Scott Lahteine	aeb6d465a4	Merge pull request #7118 from thinkyhead/bf_french_update ... French update	2017-06-22 13:10:07 -05:00
Bob-the-Kuhn	325f09ea6c	Add link to custom LiquidCrystal library by F. Malpartida	2017-06-22 13:07:08 -05:00
MagoKimbra	d26c8cc5c8	fix_planner_refresh_e_positioning (#7103) ... * fix_planner_refresh_e_positioning * Fix	2017-06-22 12:59:22 -05:00
Gege2B	c7f04fbcc7	French translation	2017-06-22 12:49:23 -05:00
Silvio Didonna	4171520729	added missing italian translation	2017-06-21 11:08:39 +02:00
Bob-the-Kuhn	41bfff14e2	Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping ... Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check	2017-06-20 16:36:22 -05:00
Scott Lahteine	424d0bae8b	Merge pull request #7100 from thinkyhead/bf_HAL_prepare ... Apply maths macros and type changes ahead of HAL	2017-06-20 01:15:23 -05:00
Scott Lahteine	5c59ee4e93	Use current (raw) Z if omitted from G29 WXY or G29 WIJ.	2017-06-20 00:10:52 -05:00
Scott Lahteine	37bc0fce62	Make G29 compatible with M206 Z and G92 Z ... Use the raw position for mesh measurement. Otherwise the `M206` and `M92` Z offsets will get canceled out by bed leveling. The downside is `G29` will not compensate for a poorly set small `M206` fudge value. To elaborate on this issue, imagine you are probing with a Z home offset of -0.1, meaning when Z homes, -0.1 is the current position, implying the ideal bed zero for the nozzle is 0.1mm higher than the Z endstop. Ordinarily when printing, Z would raise 0.1mm higher. What happens when we probe is that all points are measured with that -0.1 included. So when bed leveling is enabled the `M206 Z` offset gets exactly canceled out by the bed readings.	2017-06-20 00:09:59 -05:00
Scott Lahteine	6c45d0fd81	Apply maths macros and type changes ahead of HAL	2017-06-19 22:57:42 -05:00